Sales pricing conditions

Dear all,
i have the requirement of changing the pricing conditions for sales order creation.
screnario is like customers will book some quantity for a particular scheme .
so all the materials under that scheme will be under one material group.so the discount may be for particular material under that group.
so now my req is to enable that pricing type(disocunt)(kschl) to be for that particular material not for all .
how to do this ,i thought of maintaining a ztable (with sales org,and the material which no doscount) so if entry is not there so that kscl must be not be
there and if not i want to delete that kschl entry
hwo to do this.

Hi
1. Material specific - K004
2. Customer Specific - K007
3. Material and Customer specific - k005.
Here Select the Material selcet the Material specific discount condition type and maintain Access Sequnce in that Access Sequence Maintain Material Group.
Maintain Condition Recordes in VK11..
if still have any dout please feel free to ask me
Regards
Altaf Ahamed
Edited by: altaf ahamed on Jan 30, 2008 9:10 AM
Edited by: altaf ahamed on Jan 30, 2008 9:10 AM

Similar Messages

  • T code/ report to list all material sales pricing condition with deletion i

    I create sales org/ material level pricing conditions in VK11. Some unwanted material pricing conditions are with Deletion indicator active. Iu2019m looking for a report to list all material sales pricing condition with deletion indicator active.
    Please advice me on this.

    Hi Goto v/ld and select 16 which stands for individual prices, and then populate sales organization, distribution channel, customer ,material numbers,etc...and tick "Cond.marked for deletion" check box in "list screen" tab which is the most important, execute you will be able to see all material pricing condition even though it had been deleted.

  • Sales Pricing- Condition record

    Hi
    We have so many condition records
    but while doing sales pricing through ECP, why only few condition record is coming!!
    is there any configuartion missing?
    from where these condition type are getting selected??
    Pls help
    Thanks
    Edited by: shailesh kumar on May 18, 2009 3:01 PM

    Hi,
    The base price is coming from VK11.Other conditions are calculated on the basis of calcaulations as per the Pricing Procedure.Please check with your SD consultant about this.
    Muzamil

  • Sales Pricing- Condition value

    Hi
    In sales pricing ,Manual condition type is coming, i dont know why..
    and also for other condition record there is some condition value
    from where it is decided / configured
    pls help
    Thanks

    Hi,
    If you have maintained VK11 for your material then while doing sales pricing system will fetch the base price ,if it is not maintained then you enter the base price while doing sales pricing.
    Muzamil

  • SD SALES PRICING CONDITIONs

    hi
    in sd sales of pricing conditions of some condition type is calc from pricing procedures.
    so i can't get these from table KONV .
    how to get these data which calc from  condition type using pricing procedures.
    i have to trace trancsation VA03, when running:PRICING_SUBSCREEN_SET_DATA  will add which calc condition type .
    but i can't use it in my report!
    so some other function which have this function.
    thank you very much!

    dear Brad Bohn .
    how to do that .
    can you provide some demo code for this case.
    i mean how to use ocndition record to format like sales display condition screen (va03).
    so i can to decide which record can be to get in report!
    your help is very great. thank you very much!

  • How to change pricing Conditions in Sales order in change sales order bapi

    Hi Experts,
    How to change pricing Conditions in Sales order in change sales order bapi.
    I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
    Thanks in Advance .
    NLN

    HI NLN
      I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
      <b>Import Paramters:</b>
         SALESDOCUMENT - Sales Document Number
         ORDER_HEADER_INX - UPDATEFLAG as <b>'U'</b>.
         LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
      <b>Tables:</b>
         CONDITIONS_IN - ITM_NUMBER,
                         COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is <b>'01'</b>
                         COND_TYPE,
                         COND_VALUE,
                         CURRENCY.
         CONDITIONS_INX - ITM_NUMBER,
                          COND_COUNT,
                          COND_TYPE,
                          UPDATEFLAG as <b>'U'</b>,
                          CURRENCY.
       Hope i have clarified your query.
    Kind Regards
    Eswar

  • Sales order: How to add pricing conditions at item level in BDC of VA01

    Hello Experts,
    Am writing BDC for sales order, in this process I need to add ITEM PRICING CONDITIONS, so, am selecting item and pressing the DOLLAR symbol button and am adding the conditions by pressing PLUS button in loop!! but am getting this erorr- Field KOMV-KMEIN (2) is not an input field!! when I execute it in we19-BACK GROUND only!! if I execute the same CODE IN we19-Fore ground, I dont have any issue!!  I checked this SDN (field status in config), Google, but did not helped me!
    Pls. let  me know is there any other way to add conditions at item level in VA01 in BDC code?
    THank you

    Hi,
    It is happening because the second row of the item level data screen is becoming display only. Please check whether In foreground mode you are pressing an extra enter to give data in the second row of the item level data after giving data in the first row and in BDC recording you have not recorded that 'Enter'.
    Regards,
    Gargi

  • How to update pricing condition in sales in batch in the evening

    Gurus,
    I have a situation where I am supposed to update the freight charge condition type ("ZFR9" in my organization) on a scaled basis, depending on how much the customer (ship-to) has ordered on the same date. Since this changes from time to time, I need to write a program that does the following in the background in the evenings.
    1) Accumulate the wt of the material ordered by the same ship-to customer on the same delivery date.
    2) Find the scaled freight rate from a central universal freight charge table.
    3) Update the ZFR9 by this new frieght rate in all such sales order/line items that have the delivery date in question.
    The problem with using BDC is that the condition type ZFR9 appears on different lines depending on presence or absence of other condition types.
    Also I could not find any BAPI that does the update on a line item pricing condition.
    I am on 4.6C.
    Thanks for any help you can offer me.
    Regards
    Raju

    Guys,
    I am trying to make this work. I am able to add extra pricing conditions to sales order but I can not understand
    - how to change the value of an existing condition type OR
    - how to delete the condition type from the sales order line item
    Here is the sample code that I am using to test this out (most of the information is hard coded so that I can focus on a particular record)
    REFRESH RETURN.
        CLEAR   RETURN.
        REFRESH ORDER_ITEM_IN.
        CLEAR   ORDER_ITEM_IN.
        REFRESH ORDER_ITEM_INX.
        CLEAR   ORDER_ITEM_INX.
        REFRESH PARTNERCHANGES.
        CLEAR   PARTNERCHANGES.
        REFRESH CONDITIONS_IN.
        CLEAR   CONDITIONS_IN.
        REFRESH CONDITIONS_INX.
        CLEAR   CONDITIONS_INX.
        CLEAR SALESDOCUMENT.
        CLEAR ORDER_HEADER_INX.
    Move screen accepted docnumber TO SALESDOCUMENT.
        MOVE P_VBELN       TO SALESDOCUMENT.
        ORDER_HEADER_INX-UPDATEFLAG = 'U'.
        APPEND ORDER_HEADER_INX.
    Move screen accepted line item
        ORDER_ITEM_IN-ITM_NUMBER = P_POSNR.
        APPEND ORDER_ITEM_IN.
    Move screen accepted line item
        ORDER_ITEM_INX-ITM_NUMBER = P_POSNR.
        ORDER_ITEM_INX-UPDATEFLAG = 'U'.
        APPEND ORDER_ITEM_INX.
    Set the condition value
        CONDITIONS_IN-ITM_NUMBER      = P_POSNR.
        CONDITIONS_IN-COND_ST_NO      = '230'.
        CONDITIONS_IN-COND_COUNT      = '01'.
        CONDITIONS_IN-COND_TYPE       = 'ZSR3'.
        CONDITIONS_IN-COND_VALUE      = '333.00'.
        CONDITIONS_IN-CURRENCY        = 'USD'.
        CONDITIONS_IN-COND_UNIT       = 'LB'.
        CONDITIONS_IN-COND_P_UNT      = '100'.
        APPEND CONDITIONS_IN.
        CONDITIONS_INX-ITM_NUMBER     = P_POSNR.
        CONDITIONS_INX-COND_ST_NO     = '230'.
        CONDITIONS_INX-COND_COUNT     = '01'.
        CONDITIONS_INX-COND_TYPE      = 'ZSR3'.
        CONDITIONS_INX-UPDATEFLAG     = 'X'.  " update
        CONDITIONS_INX-COND_VALUE     = 'X'.  " update
        CONDITIONS_INX-CURRENCY       = ''.   " no update
        CONDITIONS_INX-COND_UNIT      = ''.   " no update
        CONDITIONS_INX-COND_P_UNT     = ''.   " no update
        APPEND CONDITIONS_INX.
        WRITE: / 'BAPI Called for', P_VBELN, P_POSNR .     
        CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
          EXPORTING
            SALESDOCUMENT               = SALESDOCUMENT
      ORDER_HEADER_IN             =
            ORDER_HEADER_INX            = ORDER_HEADER_INX
      SIMULATION                  =
      BEHAVE_WHEN_ERROR           = ' '
      INT_NUMBER_ASSIGNMENT       = ' '
      LOGIC_SWITCH                =
          TABLES
        RETURN                      = RETURN
       ORDER_ITEM_IN               = ORDER_ITEM_IN
       ORDER_ITEM_INX              = ORDER_ITEM_INX
      PARTNERS                    =
      PARTNERCHANGES              = PARTNERCHANGES
      PARTNERADDRESSES            =
      ORDER_CFGS_REF              =
      ORDER_CFGS_INST             =
      ORDER_CFGS_PART_OF          =
      ORDER_CFGS_VALUE            =
      ORDER_CFGS_BLOB             =
      ORDER_CFGS_VK               =
      ORDER_CFGS_REFINST          =
      SCHEDULE_LINES              =
      SCHEDULE_LINESX             =
      ORDER_TEXT                  =
      ORDER_KEYS                  =
         CONDITIONS_IN               = CONDITIONS_IN
         CONDITIONS_INX              = CONDITIONS_INX
      EXTENSIONIN                 =    .
        IF sy-subrc = 0.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
               EXPORTING
                    WAIT = 'X'.
    IMPORTING
      RETURN        =
        ELSE.                                           
         WRITE: ' BAPI RETURN CODE = ', SY-SUBRC.              
        ENDIF.

  • How to read pricing conditions on sales order

    Hi
    i need to retrive pricing conditions of sales order but before posting sales order
    any user exit avialable ...?
    also i hv found one user exit in that there is FM EXIT_SAPMV45A_003
    But i am not able to read pricing conditions values
    also no data is there in konv table coz sales order has yet not been post
    so before sales order can i read the pricing conditions values ...
    pls guide
    if possiple pls provide example also
    thanks
    Taran

    Hi
    The problem is you can't use the KNUMV, because u make sure to get the princing active in the document at run time.
    If you want to know the old data you can read the table KONV using field KNUMV, but here you can't know if some modification is done.
    U can try to know the field-symbols:
    DATA: XKOMV LIKE KOMV.
    DATA: FIELDNAME(30) VALUE '(SAPMV45A)XKOMV[]'.
    FIELD-SYMBOLS: <TKOMV> TYPE TABLE.
    ASSIGN (FIELDNAME) TO <TKOMV>.
    LOOP <TKOMV> INTO XKOMV.
    ENDLOOP.
    Max

  • Retrieving Sales Orders from Pricing Conditions

    I need to retrieve pricing condition number KSCHL from tables A906, A908, A966, A967 and A997 based on Sales Contracts (VBAP-VGBEL). However all the above tabels do not have a Sales contract reference. Some have while some have MATNR and KUNNR.
    Can anyone suggest a FM or a BAPI that can get me the price condition numbers related to a Sales contract.
    Thanks in advance.
    regards,
    Soumya

    Hi there,
    Give us some more feedback what your purpose is ...
    Do you want to get information about existing orders or do you want to create new ones based on contracts, etc...
    Without knowing your purpose it is quite hard to answer this one ...
    Thx
    Steven

  • SAP report showing sales orders on which pricing conditions have been chang

    Is there a SAP report that shows a list of sales orders on which pricing conditions have been changed.
    My knowledge is:
    Review pricing condition transaction data table (‘KONV’) helps is some way.

    Hi Ashish,
    I don't know any such a report, but I guess you can play arround with table CDPOS.
    Change doc. object = VERKBELEG
    Table Name = KONVC.
    Actually this will take lot of time.
    Thanks,
    Mandar

  • Pricing condition redetermination for sales order created with reference

    Hi,
    Are  there any exit or routines that can be used to redetermine MWST pricing condition alone when creating sales order with reference to another sales order? The pricing from preceeding sales order is copied but we need only MWST to be redetermined after saving the order
    This is because we are making changes so that while saving the sales order the material tax classification is defaulted to M based on some conditions so that MWST picks up the value M
    Regards,
    Vin

    Hello Vinod ,
    did you tried following options :-
    1.Using Exit ( MV45aFzz) and re calculte pricning using FM 'PRICING'.
    2.or Using Copy Control (Tcode : VOFM ) while creating order with Ref.
    regards
    Prabhu

  • Inserting Pricing condition in Sales order when saving the sales order

    Dear ABAPers,
           My customers requirement is when saving the sales order new pricing condition has to be updated in the line item.for this i am using the User Exit 'USEREXIT_SAVE_DOCUMENT_PREPARE' ( MV45AFZZ).While saving the Sales order i am calculating the Price and updating in the Pricing conditions.
    In XKOMV internal table i am appending the pricing condition.But the problem is ,it is not calculating the taxes and it is Updating in VBAK and VBAP.
    How to do this.
    Thanks & Regards,
    Ashok.

    Dear ABAPers,
    I have Solved this Problem.
    Thanks & Regards,
    Ashok.

  • How to disable pricing conditions from editing in sales order's(vA01) and (VA02)

    Hi Experts,
    We have a requirement to disable all the pricing conditions in a sales order from editing where some user's are changing the prices manually.
    This should be disabled for particular order types and also based on the user's role in SU01. can anyone help me to fulfill this requirement.
    Regards
    Sree kumar.

    Hi
    Check my below document in which I have explained this in detail.
    Authorization for entering/displaying manual condition in Sale order.
    Thank$

  • Urgent:pricing condition not determined in sales order

    HI,
    i have defined a pricing condition for a material . when i am creating a sales order the pricing condition is not determined;

    hi
    You must have done all the pricing related settings like access sequence, determination, condition type. Please cross check them once again. Also see if the condition record is picked up properly , is it bypassing ?
    If every thing is fine, check the item category of that material and see if in business data of that item category Pricing is activated !!
    regards
    swapnil

Maybe you are looking for