Same client's address for DDR and Dedicated Line

I need a help with client's access and routing.
On my side there is a 3845 router with Async module.
Clients are of 2 types: dial-up clients and dedicated line clients. All them are authenticated on Radius (chap).
Dial-up client has a computer, they dial on Group-Async (ip unnumbered GigabitEthernet0/0) and receive ip address from pool, configured on cisco (not on Radius). Thats' work perfect.
Now about leased (dedicated) line clients. They access from cisco (mostly 2610).
On my side they have configured ip on LL interface and static routing to that ip.
If this LL connection is broken, they have DDR access (call from their cisco to my Group-Async interface, same as for dial-up_only users).
What I need is to set one (only) ip address to clients with leased line access thus, that it would work for DDR-connection as well as for LL connection.
What I tried and it was successfull is:
interface Async1/0
description DDR
ip unnumbered GigabitEthernet0/0
encapsulation ppp
async mode dedicated
ppp authentication chap
interface Async1/5
description LL
ip address 192.168.1.134 255.255.255.252
encapsulation ppp
async mode dedicated
no peer default ip address
In this case I could ping 192.168.1.133 in both LL and DDR connection.
But if only I configure Async1/0 as a member of Group-Async0, I cannot ping 192.168.1.133 (client's side), interface comes to up though.
interface Group-Async0
ip unnumbered GigabitEthernet0/0
encapsulation ppp
async mode dedicated
peer default ip address pool POOL1
ppp authentication chap
group-range 1/0 1/1
ip local pool POOL1 192.168.1.1 192.168.1.11
Because cisco3845 give to client ip from pool:
*Apr 23 13:22:09.201: As1/0 IPCP: I CONFREQ [REQsent] id 42 len 10
*Apr 23 13:22:09.201: As1/0 IPCP: Address 192.168.1.133 (0x0306C0A80185)
*Apr 23 13:22:09.201: As1/0 IPCP: O CONFNAK [REQsent] id 42 len 10
*Apr 23 13:22:09.201: As1/0 IPCP: Address 192.168.1.1 (0x0306C0A80101)
*Apr 23 13:22:09.201: As1/0 IPCP: I CONFNAK [REQsent] id 1 len 10
*Apr 23 13:22:09.201: As1/0 IPCP: Address 192.168.1.134 (0x0306C0A80186)
*Apr 23 13:22:09.201: As1/0 IPCP: O CONFREQ [REQsent] id 2 len 4
*Apr 23 13:22:09.301: As1/0 IPCP: I CONFREQ [REQsent] id 43 len 4
*Apr 23 13:22:09.301: As1/0 IPCP: O CONFACK [REQsent] id 43 len 4
*Apr 23 13:22:09.309: As1/0 IPCP: I CONFACK [ACKsent] id 2 len 4
*Apr 23 13:22:09.309: As1/0 IPCP: State is Open
*Apr 23 13:22:09.309: As1/0 IPCP: Install route to 192.168.1.1
*Apr 23 13:22:10.077: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async1/0, changed state to up
One important thing is that I need to configure ip addressing for client without involving RADIUS (it will only check username and password).
Or explain me someone that its impossible and stop my sufferings...

I cannot agree more with your comments! What a way to frustrate your customers!
I have been having an issue with iCloud on Mac where it kept asking me for my password and sometimes would, sometimes would not continue to access my iCloud mail. Today it just refused to connect to iCloud mail.
I looked in the Mail, Contacts and Calendars in my MacBook Pro settings and discovered that 2 iCloud accounts were present. One with my original Apple ID (a gmail address) and a second with my new iCloud email ( an @me.com address). Having deleted the second account, using the new @me.com address everything is working fine.
So from my viewpoint when I moved over to iCloud I was asked to sign in with my Apple ID (the gmail address) then to create an @me.com address. However, as far as I can see all sign ins to the new @me.com account on Macbook, iPhone and iPad need to be done through the old Apple ID (the gmail address). Is that confusing and just plain crazy???
Further, after creating the new @me.com address I soon found out that this is apparently now forever bound to my old Apple ID and cannot be changed. I mean why can't I delete the iCloud account and start anew with a different @me.com address??? Also, as everybody using iCloud must create an @me.com address why on earth can I not get rid of my old gmail address and have my entire Apple ID accessed through the new @me.com address? Creating a whole new Apple ID will not solve this as we are unable to transfer purchases between accounts.
Apple products are great IMHO, but they do seem to not think things through in a very big way sometimes......

Similar Messages

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

Same e-mail-address for different Apple-IDs

Hello
I’m under the impression, that I can’t use the same e-mail-address for iCloud I used already in my Apple-ID for iTunes, because I get no verification mail for the iCloud account. Is this correct or did I something wrong?
Thanks for supporting me

Go to Apple - Support - iCloud and check Account for more info and FAQs.

How to own the same e-mail-address for different Apple-IDs

Hello
I’m under the impression, that I can’t use the same e-mail-address for iCloud I used already in my Apple-ID for iTunes, because I get no verification mail for the iCloud account. Is this correct or did I something wrong?
Thanks for supporting me
I already raised this question in the iCloud forum, but till now nobody answered - may be the wrong sub-forum

Many thanks for the answer - that's what I suspected. Anyway...
The problem I have now is, that my Apple-ID I used already for some years in order to buy apps is in the "old" format (e.g. duggy832), that means not in the form of an eMail-address. iCloud accept only Apple-IDs in the “new” format meaning in the form like an eMail-address (e.g. [email protected]).
So it needs to modify the old Apple-ID from duggy832 to [email protected] or to “transfer” – if possible – my shopping from Apple-ID duggy832 to [email protected]
Which way is possible, which is safe/secure, which is recommended?
Thanks in advance

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

Hello Nikkii,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Troubleshooting telephone-number activation (iPhone only)
After each step, toggle FaceTime and iMessage off and then on in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that your iPhone is set to the correct time zone. Tap Settings > General > Date & Time.
Note: If Set Automatically is on but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
Verify that you can send SMS messages. You need a valid SMS messaging plan to activate FaceTime.
Contact your carrier to verify that there are no restrictions or blocks on text messages. Blocks on text messaging will prevent iMessage and FaceTime registration.
If you are unable to activate iMessage or FaceTime on a device after remote wiping it, wait at least 24 hours and try again.
If "Waiting for Activation" is displayed, leave FaceTime and iMessage enabled for 24 hours. Toggling FaceTime or iMessage off and on will cause the registration process to start over.
Best of luck,
Mario

HT204053 How do I get a Mobile Me address for iChat and e-mail using Mac OS 10.4 ?

How do I get a Mobile Me e-mail address for iChat and messagingl on Mac OS 10.4

MobileMe has been replaced by iCloud: unfortunately you can't access any of iCloud's facility on Tiger (except to access email, but you would have to have set the iCloud account up on another, compliant, device first - you can't open an iCloud account on Tiger).

Force client cert only for anyconnect and not for ssl-clientless?

I need to configure different authentication for anyconnect clients and clients logging in using the ssl portal in the browser.
I want both AAA and certificate for anyconnect but i want ONLY aaa for the ssl portal (clientless)
I tried using two tunnel groups with different authentication settings but i need the same alias available for both clientless and anyconnect and when i tried that it said i cant have two with the same alias.

Did you ever get an answer to this question?
It seems you should be able to set up a two different client profiles. Under Authentication, ssl-client would would specify "Both" and the sslclientless would specify AAA. You would likely have to duplicate much of the other work but the requirement would be satisfied.

Home directories on NIS clients show "NOBODY" for group and owner

Hi,
I recently changed 10 clients from an old NIS server (running Solaris 7!) to a new one (running Solaris 10).
All my clients log on through NIS and mount their home directories OK, but when you do a ls -l it shows all files as having the owner and group as "nobody".
I am guessing this has to do with the NIS maps, or auto_home or something, but I keep going around in circles.
FROM CLIENT:
$ ls -l
total 14
drwxr-xr-x 2 nobody nobody 4 Sep 11 14:46 Desktop/
drwxr-xr-x 2 nobody nobody 2 Sep 11 14:46 Documents/
-rw-r--r-- 1 nobody nobody 136 Sep 11 13:07 local.cshrc
-rw-r--r-- 1 nobody nobody 157 Sep 11 13:07 local.login
-rw-r--r-- 1 nobody nobody 174 Sep 11 13:07 local.profile
-rw-r--r-- 1 nobody nobody 33 Sep 11 14:51 test
FROM SERVER
nisserver # ypcat auto.home
nisserver # ypcat auto.master
auto.home -nobrowse
-hosts -nosuid,nobrowse
nisserver # ypcat -x
Use "passwd" for map "passwd.byname"
Use "group" for map "group.byname"
Use "project" for map "project.byname"
Use "networks" for map "networks.byaddr"
Use "hosts" for map "hosts.byname"
Use "ipnodes" for map "ipnodes.byname"
Use "protocols" for map "protocols.bynumber"
Use "services" for map "services.byname"
Use "aliases" for map "mail.aliases"
Use "ethers" for map "ethers.byname"

Darren,
Yes. The clients are Solaris 10 as well. And the domain is the same on both server and clients.
The files should be owned by real users.
If a user ssh's into the server directly, the permissions display properly. But on the clients it is nobody. Other than the permission displaying wrong, I haven't noticed any permission-related restrictions on the clients.
-Jim
Edited by: cr8rface on Sep 22, 2008 10:30 AM

Query on Changing the IP address for Primary and Standby.

Dear All,
I have to change the IP address for my Primary system. It is in windows environment with Oracle failsafe.
i am using the dataguard for switchover process. I changed the IP address in all the files like listener and TNS names and after that i mounted the database and checked the dataguard configuration.
DGMGRL> show configuration giving success. my problem is when i executed the show database verbose primary_database. it is showing the old IP address in static connect Identifier.
how to change the IP in static connect Identifier? i updated all the files properly with new IP, but still facing this. will it affect any thing during switchover?
Thanks.

Hello;
The simple solution is remove broker and set it up again.
How to Safely Remove a Data Guard Broker Configuration (Doc ID 261336.1)
Best Regards
mseberg

Can i have same ORACLE_BASE directory location for Grid and RDBMS home ?

Grid Version:11.2.0.3
OS : RHEL 5.8
Can I have same ORACLE_BASE location for Grid (CRS) and RDBMS software Homes ?

The OFA guideline for ORACLE_BASE is /u01/app/<owner>. If you are using the same owner for all software (let's call him "oracle") then a simple installation will have one base /u01/app/oracle. This base will be shared by all installations of Grid and RDBMS software. But, if you use two separate owners (let's call them grid and oracle) then you will have two separate ORACLE_BASE locations /u01/app/oracle and /u01/app/grid. I always use two separate owners, but I know many people who only use the oracle account and that is fine too.
Oracle allows every ORACLE_HOME to have a unique base. There is no requirement to install more than one ORACLE_HOME under a given ORACLE_BASE location. This is just an extension of what I said above, that the ORACLE_HOMEs for Grid and RDBMS can be stored under separate ORACLE_BASEs.
If you are using RAC then I strongly suggest you read chapter 1 of the Oracle Real Application Clusters Installation Guide. Read section "Overview of Oracle Base and Oracle Home Directories". The rules for ORACLE_BASE are as I noted above, but the rules for ORACLE_HOME change: the Grid ORACLE_HOME is not to be a sub-directory of the Grid ORACLE_BASE as it is when not using RAC. So, with RAC your directory structure might look more like this:
su -
umask 0022
mkdir -p /u01/app/oraInventory
# Grid Base
mkdir -p /u01/app/grid
# Grid Home
mkdir -p /u01/app/12.1.0.1/grid
# Oracle Base
mkdir -p /u01/app/oracle
# Oracle Home
mkdir -p /u01/app/oracle/product/12.1.0.1/db_1
# Ownership for all of the above...
chown grid:oinstall /u01/app/grid
chown grid:oinstall /u01/app/oraInventory
chown grid:oinstall /u01/app/12.1.0.1
chown grid:oinstall /u01/app/12.1.0.1/db_1
chown oracle:oinstall /u01/app/oracle
My examples show 12.1.0.1 but it's the same for 11.2.0.3.
There's no requirement to create the home directories prior to running the OUI. It can create them for you. I just shown these commands to help you understand the big picture.
The OUI will pop-up a warning if the Grid user's ORACLE_HOME is outside of his ORACLE_BASE as shown in the above mkdir commands, which is funny since it is the recommended setup in the Oracle RAC documentation. I submitted a bug report several years ago. To be consistent across all of my RAC and non-RAC servers I follow the more strict rules of RAC and use the mkdir commands shown above.

How can I set up iCloud for my wife's computer and iPhone 4S when I previously set up an iCloud address for her and now can't use it in the iCloud set up?

I set up an iCloud address for my wife, evidently before running the iCloud set up and now I can't connect her to
an iCloud email address through the set up because it is already in use?

I did not articulate the problem properly. I have the sign in for Birgit on Apple BUT I am unable to set up the
icloud.com email address for her because I had already established it before running the iCloud set up on her computer and now when I try to set up an iCloud email address for her through the iCloud application I can not do so because the email address is "already in use." I have no idea how to meld the two.

HT204053 Now I've got it totally screwed up. I have one address for iCloud and another for iTunes. I would rather have only 1 but can't make the forms fill out correctly to do that. What now?

I've just bought my iPhone and have had an iTunes account for some time. While setting up the iPhone - Apple ID - the form would not allow me to use my currect primary email address. I had to insert another one because of the iTunes email address apparently. Now I can't seem to get it straightened out. I need my primary email address to be the only one and use a secondary address for the "rescue" address. How can I manage this without making everything worse?

Welcome to the Apple Community.
You need to use the original Apple ID you used for iTunes with iTunes and iCloud on your new device. What problems did you encounter when you tried to do this.

E90 IM server address for hotmail and yahoo

Hi,
I would like to start using my IM in E90 and have a hotmail and yahoo account. I was wondering what is the server address for both IM to be able to logon and chat?
thx

hey brother .. tried the Yamigo thing .. started IM too .. signs in Yamigo .. but dont know how to incoparate my yahoo and msn in it .. contrary to that it takes my yahoo id as my contact .. i have added my yahoo and msn on yamigo when i signed up there .. no wwhen i search any contact from its server .. it finds ..the person ( the ids i get from yamigo server ) but when i start a convo .. it says SERVER ERROR .. kindly help ..
btn .. i m using a communicator E90 .. NOKIA .. if u cant call just send me a note here so i can call u on ur cell
thanks
@li.
Edited personal information
Message Edited by shehanj on 22-Feb-2009 06:39 PM

Firefox stops loading files halfway through - i.e. has same settings (except allow for session) and works fine

Firefox stops loading files halfway through - Internet explorer has same settings (except allow for session), is less secure and works fine.

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Same client's address for DDR and Dedicated Line

Similar Messages

Maybe you are looking for