Same filesize no matter what bitrate I choose

Hello everyone.
So, I just noticed this problem. It doesn't really matter what bitrate I choose (Only matters if I go below 70) I get almost the EXACT same file size and quilty.
Here are my export settings.
I have a YouTube channel and I upload videos everyday so I want them to be in the best quality possible. This has always worked for until recently. If I export the same video with a bitrate of 300 and then again with a bitrate of 200, the filesize difference is usually about 1MB.
This is starting to annoy me a lot because if I check the videos bitrate after I've exported it, it is NOWHERE NEAR 300. For some reason it chooses to render at a bitrate of 76-80 no matter what.
Here is a picture of my timeline:
I'm using Adobe Premiere Pro CC on a Windows 7 PC.
PC SPECS:
GPU: GIGABYTE GTX 670 4GB
CPU: Intel i7-3770k @3.5Ghz (Overlocked to 4.1Ghz)
RAM: 16GB
MB: GIGABYTE GA-Z77P-D3
If there is anything else I need to tell you that I might've missed, please tell me so!
I really need to get this fixed as my videos look nowhere near as good as they used to now.

Also, please stop telling me that the bitrate is too high or something, that's not the problem.
I get that. As I said, you have hit a wall of some kind. I am not sure that anyone ever tested about 70Mb/s. Maybe that is the wall that can't be climbed over.
Submit a bug report. Perhaps it will be an easy fix. Perhaps they already know about it and are just waiting for enough people to complain that it becomes worth spending engineering resources on it.
If you want to export at that high a rate, and the software seems to let you try it, the the software should actually do it. I agree.
Although at that bitrate you might as well export to a lossless codec. What is the point of a lossy codec at a bit rate higher than the original recording? It can't be quality because you can't get higher than 70 right now, so my guess is that you have never seen a quality improvement at 300. You can't get to 300. Not really.

Similar Messages

In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order?

In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order? I am working on a Macbook pro running OS X 10.9.4. Our printers are fully capable for booklets with staples and folds. Would love some help. Thank you!

To: ~graffiti
(This email is not intended to go on public forum -- but I wanted to respond
to you)
Thanks for your reply....FYI...I was trying to download from www.adobe.com on
the specific page that has downloads of your products.    As far as the
alternate source is concerned I am not totally sure what the capabilities it has as
I am recovering from a hospital stay and had to send my wife to retailer to
pick this up because I am accessing email from home until I return to work and
need something to work now. I don't yet have the SW. (I would have had her
buy the actual Adobe Pro 9.0 -- but it is a wapping $499 and change).
Regards,
Staurt Rednor ("Stu") - [email protected]
===========================================================
Subj:   New message: "No matter what I try can't download
Adobe Pro 9.0 or free Adobe Reader"
Date:   4/5/2009 7:38:17 PM Eastern Daylight Time
From:   [email protected]
Reply-to:   [email protected]
To: [email protected]
Sent from the Internet (Details)
SGuitar43,
A new message was posted in the thread "No matter what I try can't download
Adobe Pro 9.0 or free Adobe Reader":
http://forums.adobe.com/message/1867664#1867664
Author : ~graffiti
Profile : http://forums.adobe.com/people/~graffiti
Message:

No matter what tool I choose, all I get is a hand cursor

I recently installed Photoshop CS4 and didn't have any problems with the installation. However, quite frequently the program gets into a mode where no matter what tool I choose all I get is a hand cursor. I've tried logging off to correct the problem, but that doesn't work. Rebooting the computer is normally sufficient. I haven't determined any specific actions that always cause this circumstance to arise. Does anyone have any ideas on what my problme might be?
BTW, I'm running on Windows XP Pro, 32-bit, with 3.5 GB of memory and a 2GHz dual-core cpu.
Thanks.

This is my expereince as well. I've never seen the problem in any other application and I've been using Photoshop for over 15 years, and this is the first version that I've encountered this problem. And like you, when I switch to any other program the mouse and keyboard work just fine, so it is not a physical keyboard problem.
But, if hitting the space bar a few times solves the problem, then I'm happy for now.
Thanks all.
Chuck

My PSE12 will only type CAPITAL letters no matter what font I choose. Started doing this yesterday

My PSE12
will only type CAPITAL letter no matter what font I choose. Started doing this yesterday and I can't get back to having upper and lower case letters.

Perhaps you could reset the tools using this method:
1) Launch PSE in Editor Mode
2) click on the Expert Tab
3) At the bottom right corner look for something like this :
This should solve the problem quickly.
Good luck and post back.

My contacts list is in very large font, how do I make it smaller. I've tried the settings and it doesn't matter what size I choose for the font, it's always the same large font.

How do I make my contacts list in a smaller font? I've tried to change under settings but it never does change. This is my first iPhone - hopefully it won't be my last, but too many frustations might cause me to turn this darn thing in!

You have zoom turned on in Settings - General - Accessibility
Tap the screen twice with three fingers to get it back to its original resolution

When i play in the pogo rooms to join a room it keeps saying to shut off popup blockers, i have tried and it keeps coming back saying the same thing no matter what i do

this has been going on for days now either it will play or it wont play. when i try to go in the canasta rooms or any room that youhave to join it it will go thru the stages and come back sayin gshut off pop up blockers. i have tried i just installed google chrome and went thru all of that and it still doesnt work. so i uninstalled it. now i have just internet explorer and its doing the same thing. i have tried foxfire and it does it too. i even went thru pogo live chat help but nothing works please help

http://support.apple.com/kb/HT1274

PSD file import: always the same layers no matter what psd file

So, another problem has just popped up! Picture is, I imported a psd file into ae and made a cool vid out of it, which is all well and good. However, I decided to do a new one and as I imported the NEW psd file (as in COMPLETELY new, different file name with different drawings, different layer names etc) into ae... surprise surprise! The OLD psd file is displayed in the ae screen (???) It says it has imported my new psd file, but the layers and images displayed are from the old one (which, as I said, has nothing to do with the new one, except in matching canvas size).
Thanks!

How did you import and what exactly are you viewing? The source view? The comp view? The timeline layer view? Did you use "File --> Replace Footage"? Naturally, unless you actually replaced the elements, the latter two will keep showing your original PSD as they are referenced by the original project. Otherwise the source view should correctly reflect your new document. That aside I seem to vaguely rember an issue with this in some older version of AE (something with AE misinterpreting paths for identically named layers in different files), but since you did not make any mention of your AE version nor platform, operating system or hardware, it will be impossible for anyone to be more specific....
Mylenium

Podcasts are "stuck"; keep getting the same podcasts no matter what

Greetings,
Gee, it seems the only problem I ever have with my iPhone is syncing. And it's started again.
I have subscriptions to about 30 podcasts, about half of those are checked to sync with my iPhone. About a week or so ago, I would listen to a podcast but when I synced with iTunes it would get marked as "new" again, reset, and stay on the iPhone. If I manually deleted it on the iPhone, the next sync would copy it back.
I've have this kind of problem in the past and it eventually just corrected itself, so I've just ignored the problem for several days.
Now it's gotten completely stuck. Trying to get the iPhone and iTunes to "re-sync" I turned off several podcasts in Podcast tab of iTunes and synced. Nothing happened. The podcasts are still on the iPhone. So I manually deleted from the iPhone and synced again. iTunes copied the disabled and deleted podcast bask to the iPhone!
So I tried to get radical. I reset and restored my iPhone from backup. Turned off all podcast syncing. All of the podcasts were still on the iPhone. I then turned podcast syncing back on, but unchecked every one of my regular podcasts and then check one, and only one, podcast that I normally never listen to on the iPhone. I then manually deleted +every single podcast+ on the iPhone. When I synced with iTunes, *iTunes (again) copied every single one of the disabled podcasts back to the iPhone!!!* Oh, and the one podcast I asked iTunes to put on the iPhone; it's not there. ;(
How can I "reset" the synchronization of podcasts between my iPhone and iTunes so they're talking to each other again? And please don't say wipe your iPhone—I have dozens of applications with settings and data that would all be lost. It would be easier to give up podcasts than the day it would take me to reconfigure every iPhone app.

I appear to have found a fix.
I changed my sync settings to 'manually manage music'.
Once i applied this the podcast icon underneath my device disappeared.
I then unchecked 'manually manage music' and applied the change.
the podcast icon underneath my device in itunes flickered on and off a few times then when it was finished syncing all the podcasts had gone.
Message was edited by: Mr Baldman

I keep getting the same msg no matter what i try

I keep getting a msg that says "the maximum power that can be supplied to usb devices has been reached please remove at least one device" please help i have tried eveything said and still it does not work i am consoleless without my ps3 all help i am hugely gratefull for

What have you tried?

I just want iCal to keep the same time for appointments no matter what timezone I'm in

I just want iCal to keep the same time no matter what timezone I'm in. Whenever I change timezones, all my appt times change too... please help!

Make sure you set the time zone you want from the drop down menu in the upper right corner?

FMLE 3.2 MAC - hard cap of 16 fps no matter what

I'm running FMLE 3.2 on a Mac Pro with 2 quad core CPUs and 6gb of RAM. I'm capturing with a Black Magic Design Intensity Pro. I'm able to capture using Final Cut at 720p and 60fps with no problems.
However, in FMLE, no matter what settings I choose, the capture frames per second seems restricted to 16 FPS. I've tried change the Encoding Options Frame rate - whether I set it to 60 or 30 or anything else, always encoding actually occurs at 16fps. I've also tried changing the bitrate, output size, and tested both streaming to FMS, saving to disk or both together.
My CPU isn't breaking a sweat during the FMLE encoding process to I know its not that. Anyone else had any issues like this?

Not sure I can help you but I´m on mac too (single quadcore cpu) got the same BM capturecard you have, I use camtwist and the 3.2 for my broadcast to justin.tv.
If I set my fps to 25 it push through pretty much the same or just a little under, it can vary over time though but not much. Guess it depends on my bandwith I´m getting at the moment how much it would change. All the settings in FMLE will probably affect your fps so I think you need to try different combinations with the settings.
If I for example go over 30 fps, increase my kbps to high and use to big input and output size my fps can drop really low. But with 25 fps VP6, 800 kbps, output 720*404 I can go as high as FMLE let me with the input. So there seem to be limits and combinations one need to figure out to make it run the best it can depending what hardware one might have.
For example in my case my upstream at the moment is just round 2 mbps so that make it useless to go over 800 kbps, so there´s one limit that affects things.
My audio is set to 44100, 224 and stereo.
Sorry I can´t help more.
Good luck

Mask gradiant black and white no matter what color is chosen

My mask gradiant is black and white not matter what color I choose. How do I fix that?

You may wonder about that from now on until:
1. When someone expresses difficulty understanding you, describe just what you mean, using different terms.
2. Use whole paragraphs. Maybe even more than one. This isn't instant messaging.
Your phrase "mask gradiant" (assuming one reads through the misspelling) could mean many things. You haven't provided enough context to know what you really mean.
If I put a gradient into a mask it may be because I want the image on a layer to fade away, revealing what's underneath. The gradient can only be grayscale (black, gray, or white) - it cannot be colored.
I can't imagine why you would want to color a mask. It makes no sense. What are you really trying to accomplish? Did someone tell you that you could do this?
Perhaps you're using the terms "mask" or "gradient" incorrectly, or for something that is really called something else.
Help us help you out here.
-Noel

Same pop keeps coming up no matter what sight I go to, and antivirus blocks it, explorer doesn't ahve this problem

this website aways pops up and my virus is protecting me. But it only happens on Mozilla
It does not matter what site i go to, the same pop up keeps coming up and i have pop blocker on with a couple of exceptions. This is getting very frustrating.
Please help to stop this pop.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

TS1368 I can not connect to the ITunes store. I have updated my apple ID and made sure that everything is set correctly. However, I can not purchase or update any apps no matter what I do. My partner has the same phone and hers works perfectly. I'm not su

I can not connect to the ITunes store. I have updated my apple ID and made sure that everything is set correctly. However, I can not purchase or update any apps no matter what I do. My partner has the same phone and hers works perfectly. I'm not sure how to sort this out. Please help
Thanks
Andy

I've been having this problem for weeks and have found no solution to it. There are lots of other people with this issue too if you look back on the boards. I even e-mailed AND called Apple and have had no luck. I tried all the suggestions they gave me and all the ones I found on here- nothing worked. I even uninstalled and re-installed iTunes (boy was that a pain!) and no difference.
The weird part is that I have an old laptop that works and if I buy music with the laptop I can download it with my regular computer buy buying does not work on my regular computer. That tells me it's not a connection issue. I can't get to my account either.
I can't figure out why an issue that has kept so many people from purchasing a product has been ignored!

Making A Row Of Thumbnails The Same Size As The Screen Monitor No Matter What Montior You Use

I am making a website and am trying to get the row of thumbnails/cells (which contain 5 thumbnails across each set in a cell) to be the same length as the screen monitor so that you do not have to scroll horizontally across to see more cells/thumbnails in the table.
Here is the thing. When I first started making tables, I was making actual pixels to fit MY screen size, but then I found when I looked at the website on another computer the tables came out different sizes (because of different size monitors I assume). So, I changed the tables from pixels to 100% and that seemed to do the trick. Whatever computer I pulled the website up on, the tables extend perfectly across the monitor screen to its fullest extent and without having to scroll horizontally.
The next part of the website involved adding thumbnails of images. So I made a table 6 rows across by 5 columns down. And I put a thumbnail in each cell, so that 5 thumbnails went across the row. I also set the table width to 100% just like I previously did for my heading table. When I tested it on a laptop computer it seemed perfectly fine and the 5 cells in the row extended across exactly to the length of the monitor. But, then when I opened it up on a desktop computer, I had a problem. What you see is 4 of the columns on the monitor and then the fifth column is further to the right off the screen, which makes you have to move a horizontal scroll bar to see the fifth column. This table is also not flush with the heading table either obviously, although I have both set to 100%.
I don't know if my problem has to do with the table I made or the image sizes in Photoshop. In photoshop after I had scanned the image I went to "Image Size" and reduced the "document size" width to 1.5 cm to make the image come out a lot smaller. Should I be doing something different in Photoshop when changing the "Image Size"? Maybe saving it as a different measurement (choices are percent, inches, cm, mm, points, picas, columns)? Or, do I need to change something with my table/cells?
Anyone know?
Thanks.
P.S. I will post this in Dreamweaver and Photoshop, to get a little more help.

If I have to accept the fact that this table I made can't fit each person's monitor screen, then ok, but at least have it to where all the tables are flush with each other. If you take a look at the website URL I posted, every table I made for this page is set to 100%. No matter what computer I pull up the webpage, the heading tables and bottom copyright table come out to 100% of the screen size like it should. It is the tables I have for the pictures that extend pass this and make a horizontal scroll bar necessary and are thus not flush with the other tables. And,I figured out why. When I resized my images in Photoshop, I set the width of each thumbnail to 177 px. I also have 30 px padding on both the left and the right side of each cell (60 px total). So, calculating this we have: (177 px x 5 images across = 885 px) + (60 px padding x 5 cells across = 300 px) = 1185 px....an EXACT amount (which is MORE than my screen width) and OVERRIDES the 100% I set for the table. Therein lies the problem.
So, what I need to figure out is how to make either the cells or images adjust accordingly to fit the actual width of the monitor; 5 cells across = 20% each cell = 100% grand total across.
Follow me so far?
I know there has to be a way. I've seen other pages that can do it. I will keep trying and eventually figure it out.
Thanks for the help.
From http://www.awdsf.com/courseware/html/html2_tables.htm:
" A website that requires side scrolling is considered very un-professional."
And I couldn't agree more with this statement.

Same filesize no matter what bitrate I choose

Similar Messages

Maybe you are looking for