Same measuremen​t sequence Multiple UUTbatch model

I kind of have the idea of what i want.
I have a sequence that will do some measurements with the DMM for a some test points on a board. i want to test 4 boards.
i have made my routes on niSE to connect the dmm via a switch matrix to all of those points and i have the hardware connected to the matrix.
My routes :
UUT1_route
UUT2_route
UUT3_route
UUT4_route
The 4 UUT will share the same Matrix and DMM. so i cant use parallel process right?
but i can use a Batch Model Serial right ? this will be easy because i will just need to make one program and that same sequence program will be use with each UUT just different switching configuration.
how do i tell each socket to use it own UUT route?
i will appreciate your help.
thanks.

I am gonna answer this my self. since yesterday i got my book out and also i opened some examples.
if you took the course  TestStand Development Course go to section 8 and also open the example Batch UUT.
Bascially change you process model to Batch.
take a look on the example at the step that says Set Chamber Temperature... that step is general for the HOLE BATCH ... all UUT will stop executing until that step is release. if you read on the colum settings it will say BATCH. this will be a common operation for the hole batch. to set that behavior go to step->properties->syncronization..there is a drop down menu with many options, you have to click one thread only and this will execute a general step for the entire batch. basically it will wait to the oven temperature to reach a level and then continue testing.
if you see the pulse test sequence. that test is enclosed between a Syncrhonization step. enclosing this part of the code on a synchronized step will allow the code to run exclusively for that UUT and the others UUT will wait until that part enclosed with the Syncrhornization finish to continue testing the batch. in other words if you share instruments like a dmm and a switch and you have common code that will repeat on every UUT you enclose it under syncronization step.
to know which test socket it is executing and with it switch your matrix to the desire position and choose the routes to use you need to put this variable on and if RunState.TestSockets.MyIndex and there you will know which UUT you are working on .
this is just a great part of test stand.

Similar Messages

  • Single EAR multiple WAR model - faces-config not loading

    Hi
    I am deploying my application on weblogic 10.3 My application is in form of a Single-EAR-Multiple-WAR model. The application starts up correctly but when i bavigate from one module (WAR) to another (WAR), it doesnt initializes the managed beans. It is not able to load the faces-config from the second WAR.
    can anyone please let me know ehat am i missing?
    Thanks a lot
    -Ankur

    Hi,
    This is not an issue caused by having multiple wars inside same ear.
    This looks like a runtime exception when trying to render the jsp (The jsp is compiled to a sevlet and the inside the service method of the servlet you are getting this exception). Double check you jsp for the possible cause of this exception.
    Thanks,
    Gopinath Ramasamy

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • Same apple id for multiple devices

    I have been use the same apple id for multiple devices (both are iPhones running iOS 6 - one is a 4, the other a 4S.) I'd like to sync separate content for each device using the same instance of iTunes (iTunes V 10.7 installed on MacBook running OS X 10.6.8.) Can I assign the second device a separate apple id in odrer to differentiate the content? Thanks for your assistance!

    No, a second Apple ID will not work. iTunes can already tell them apart.
    When you connect the first iPhone to iTunes, check and uncheck the things you want and Sync.
    Do the same with the second iPhone.

  • HT204380 Is there a way of using the same FaceTime account on multiple devices?

    Is there a way of using the same FaceTime account on multiple devices?

    Yes you can use the same Apple ID on multiple devices and FaceTime with each one. You have to associate a different email address on all but one of the devices.
    Lets say you have two iPads and two iPods..... All sharing the same Apple ID. When you set up FaceTime on three of the devices, you have to associate another mail address in Settings>FaceTime>You can be reached for Video calls at>Add Another email address. Add a different email address in that setting and let Apple verify the address.
    After that email address has been verified by Apple (they send you an email to that address so look for it in the inboxes of that email account and follow the instructions in the email), then remove the Apple ID email address on each of those three devices. You can use the primary Apple ID email on the fourth device.
    Obviously, you have to have additional email addresses but you can set up free email accounts with AOL, Yahoo, gmail .... and you can use the email address just for FaceTime if you like.

  • Can I use the same Apple ID for multiple devices

    Can I use the same Apple ID for multiple devices?

    Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
    How to use multiple iPhone, iPad, or iPod devices with one computer
    Using More than One iDevice on the Same Computer
    This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
    On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
    Start by transferring the new device(s) to a new account along with all your data.  Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
    If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
    Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted.  Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
    Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
    Note: The essence of the above was created by user, randers4. I
    have made substantial changes to improve readability and syntax.

  • Can I use the same email address for multiple seats in Creative Cloud for Teams?

    Can I use the same email address for multiple seats in Creative Cloud for Teams?

    No. http://www.adobe.com/products/creativecloud/faq.html
    Can I buy more than one membership to an individual offering of Creative Cloud? 
    No, Adobe has moved to identity-based licensing with a technology that will not support multiple same-product licenses, so you can buy only one membership per Adobe ID. If you need two Creative Cloud memberships, you will need to purchase each with a unique Adobe ID. You can also purchase a Creative Cloud for teams membership, which allows you to purchase and manage multiple seats under one account.

  • Can I use the same administrator password on multiple devices

    Can I use the same administrator password on multiple devices?  (ie) MacBook Pro and Powerbook G 4

    Hello,
    I use the same password on all my Macs. Provided you have set the user accounts with the same password, you will be fine.

  • Can we use the same credit card for multiple customers???

    One of my clients has a requirement where they need to use the same Credit Card number for multiple customers. I have looked into the possibility of using the 'Alternate Payer' functionality but besides that is there any other way SAP can be tweaked to accept the same credit card on multiple customer accounts?
    Thanks in advance for any help or guidance you may provide.
    SJ

    I know SAP throws an error message which is why I was looking for a solution. I do have a work around. By pointing to an 'Alternate Payer' on the Payment Transactions tab on the customer master you can have a credit card on this alternate payer master record and use this payer on several other customers. All these customers will not have any credit card stored on their master records.
    Thanks for your response though.

  • Prevent the same user login on multiple computers at the same time

    prevent the same user login on multiple computers at the same time

    Is there any way (currently running 2012 Servers) that we can prevent users from logging into multiple domain computers simultaneously with the same username?
    We still want them to log into those computers, just not simultaneously?
    LimitLogin utility not work in Windows 2012 server.
    Thanks.
    Babu
    Unfortunately Windows has never offered this feature as a built-in feature, but there are several possibilities discussed in these articles:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/0103b5e7-0db5-4fb4-bfe7-d7132983880a/limit-concurrent-logins-on-a-ws-2008-environment
    http://www.edugeek.net/forums/windows-server-2008-r2/61216-multiple-logins.html
    http://windowsitpro.com/windows/prevent-multiple-logons-gpos
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Can we control order of cycling when use same access key in multiple locations

    Hi,
    I'm using Jdev 11.1.1.6, IE 9, Firefox 24.0.
    I have created simple jspx page having two buttons, named Add and Close. Close button has got access key as C. When click on Add button I'm calling a <af:popup> and that popup contains two buttons Submit and Cancel. Cancel button has got access key as C. Basically in one jspx file I have got two button using same access key. At runtime those buttons will display one in page and one in popup. 
    In IE: it works fine. When I do access key on popup it will close down the popup.
    In Firefox: it will first focus to the button on the page. When I access the same key for the second time it will set the focus to button on popup and will not execute the action.
    If I'm using different letters it will perform the action in firefox and IE both. In my requirement I need to use the same letter.
    I read in oracle documentation "If the same accessKey appears in multiple locations in the same page of output, the rendering user agent will cycle among the elements accessed by the similar keys.". So it seems to be an expected behaviour.
    My question is: Can we control the order of cycling. i.e. If we do access key on popup, can we first focus on the button in popup instead of button on the page in firefox.?
    Greatly appreciate your ideas.
    Thanks.

    Hi,
    unfortunately yes, the cycling behavior is up to the browser.
    Frank

  • Running the same sql script in multiple databases

    Hello,
    What is the method to run the same sql script in multiple databases? I want to write a unix script that would select from different databases and run a sql/plsql script in those different databases. What are the ways to write such a unix script? Thank you in advance.

    Just have a parameter which takes in the oracle connection parameters and use it in your sqlplus script with your shell script.
    Your sqlplus script can have a procedure/function call or an anonymous block;
    Then have a wrapper script to call the original script with different connection parameters. Hope this helps.

  • Best way to know correct forecast model - process chain set up with multiple forecast models

    Hi Experts,
    I need your help in selecting best forecast model for our company. We have some of the models already used for our company, and because of multiple models used it is taking very long time for process chain to finish. There is no existing documentation available on which model was used why initially. Please help me to make out forecasting process smooth.
    - What is the best way to know, which forecast model is correct and should be used for our forecasting process.
    - In case multiple forecasting models are really required to be used, please suggest ways to optimally schedule them in process chain.
    - At times we get messages like "not enough data available" for specific model - any way to avoid this.
    - How to optimally use parallel processing profiles forecasting process in process chain.
    - Things which should be avoided.
    Request your help, please share your experiences.
    Regards
    NB

    Hi Neelesh,
    There are many points you need to consider to redesign forecast process for your company/client.
    You need to select the best suited forecast model first depending on the business. This has to be well tested & agreed by business users. Complexity will be an outcome of this exercise with business users. Best id to give then a brief intro on all available models & then help them selection the best one as per their requirement.
    Auto selection models are generally more time taking & should be used only when you have no idea at all on the business/demand pattern.
    Run time will depend how you are clubbing the CVCs to get the forecast generated & also parallel processing. For parallel processing profile you will need to do trial & error testing along with help from Basis team on how many free dial up processes are available.
    Even you can run many forecast calculations in parallel if the product/cvcs are totally different. - As per my personal experience maximum run time reduction can be achieved here.
    Daily run is not advisable except only for businesses where you have too much dynamism in demand planning i.e. you expect the demands to be changed overnight. Most of the companies run forecast on monthly basis or at weekly basis at the max.
    "Not Enough data" will be a problem if you are having the irrelevant models used in forecast profiles. This means users are not bothered to maintain the needed data for he forecast calculations or they are not aware at all of the situation. Running such models on daily basis is not advised at all. Better users should use interactive forecasting & saving the results in such cases.
    Just to give a crude example we get forecast calculated on monthly basis for approximately 4 lac cvcs in less than 3 hrs using moving avg, seasonal linear regression, seasonal trend, croston models. We use parallel profiles also everywhere with 10 blocks & 500 cvc/block.
    Hope this helps. Let me know if you have nay more questions & also the results using any of this.
    Regards,
    Rahul

  • The same podcast shows up multiple times

    In iTunes, the same podcast shows up multiple times. There is only one copy of the file on my computer, and the file it located in the right location, but in iTunes, the same podcast is repeated two or more times. When I delete a single podcast and try to play its copies, iTunes notifies me that it can't find the file. I believe this happens when I use the import folder utility and add music in the iTunes music default location (which includes the podcasts as well as the music I want to import). Does anyone know how to keep this from happening?
    Thanks

    Well, the easiest way would be to stop using the import folder utility. Sounds like you're adding the podcast multiple times. You're probably doing it to other files as well...

  • Same ISO Code to multiple UOM

    Hi Friends,
    Can we assign same ISO code to multiple UOM's???. If so, what will be the efeect??
    Thanks in advance,
    Steve.

    Hi,
    Assignment of same ISO code to multiple UoM can be done, but the primary code checkbox must be ticked only for one, else would cause conflict for EDI.
    The SAP help reads as below:
    An ISO code can be assigned to several internal measurement units.
    Use
    The ISO code is important for EDI. It is used to convert the internal SAP
    measurement units into standard measurement units. Data exchange
    via EDI requires internal measurement units to be converted into standard
    measurement units.
    Hope the above answers your query.
    Regards,
    Vivek

Maybe you are looking for