Same Menu Outro To Different Tracks?
Hello,
I created an animated menu. I have animations of the titles and images flying in (when you arrive at a menu), as well as animation of all the titles and images flying out (when you've made a selection and leave the menu.)
However, if I have multiple track choices on a menu, what would be the process to first go through my animated outro menu before going to the selected track?
Right now, I'm going about it in a VERY convoluted way. I've created many duplicates of my outtro menu, and each of those duplicates have their own timeout action to go to their specific tracks. And depending on which selection you make on the menu, the button will take you to one of those duplicated menus.
Make sense? I got dizzy just trying to create it. I'm assuming there is an easier way? I looked into stories, but they only choose the order of tracks. Is there a way to do this with a menu? Are there scripts for this?
Thanks!
Point each button to a seperate script instead of a track. Each script should add a number to a grpm (a variable). Button 1 jumps to a script that adds one, button two adds two, etc. The 2nd command in each script should be a 'jump to' command to a track containing your 'transition animantion'. That track should then jump to another script that has 'jump to track 1 if grpm = 1, jump to track 2 if grpm = 2', etc.
There is a built-in transition that I believe allows you to use any video clip. This would avoid all the script, but I don't think it use sound in that case.
Jason
Similar Messages
-
Can you substitute a asset of the same name but a different track length?
Hi,
Does DVDSP allow you to substitute an asset (which has chapter markers and is all linked up)with an asset which is identical apart from length and marker placement. In other words, it will have the same name, same number of markers, markers named the same, etc. The only difference will be where the markers appear in the track, and the track will be a different length?
Is this possible and if so, how? I have tried to do it, by moving the first asset to a new location on the Mac and then going in to the project and attempting to relink the asset to the new file. However, it comes up with the message that the file I am trying to relink it to has different attributes! Can this be done?
Help much needed and appreciated.
Thxs
Ben
G5 Dual Mac OS X (10.3.9) FCP4, DVDSP2I understand that you don't want to redo all the linking with the markers. You can try following (make a copy of your project first to be safe) :
- close your project and quit DVDSP
- move your old asset, and replace it with the new one
- reopen your project
A warning message should tell you that this asset has changed, but your marker will remain at old position. If the asset length are not the same, old length information will be used by DVDSP. To correct this, delete the asset from the timeline, and drop it back to the timeline.
Now you just have to move the marker to the right position. -
How can I add more than one same spry menu (eg. collapsible menu) with in different styles (font size, color, background, etc) on current page?
Hi Nancy,
This screenshot was only for imagination. A part of the code (not all) is below. In the code there are some background images but they are not seem in live mode.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title></title>
<link href="css/my_site.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css"/>
<link href="SpryAssets/SpryCollapsiblePanel.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
<script src="SpryAssets/SpryCollapsiblePanel.js" type="text/javascript"></script>
<style>
#CollapsiblePanel1 .CollapsiblePanelOpen .CollapsiblePanelTab {
background-color: #003366;
font-size: 18px;
line-height: 52px;
color: #FFF;
#CollapsiblePanel1 .CollapsiblePanelTabHover .CollapsiblePanelTab {
background-color: #003366;
color: #FFF;
text-shadow: 1px 1px #000;
font-weight: bold;
line-height: 52px;
#CollapsiblePanel1 .CollapsiblePanelClosed .CollapsiblePanelTab {
background-color: #C3CFDF;
border-radius: 5px 5px 0px 0px;
color: #999
text-shadow: 1px 1px #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
font-weight: bold;
line-height: 52px;
#CollapsiblePanel2 .CollapsiblePanelOpen .CollapsiblePanelTab {
background-image: url(images/international.jpg);
background-repeat: no-repeat;
font-size: 18px;
line-height: 52px;
color: #FFF;
#CollapsiblePanel2 .CollapsiblePanelTabHover .CollapsiblePanelTab {
background-color: #003366;
color: #FFF;
text-shadow: 1px 1px #000;
font-weight: bold;
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel2 .CollapsiblePanelClosed .CollapsiblePanelTab {
background-color: #C3CFDF;
border-radius: 5px 5px 0px 0px;
color: #999
text-shadow: 1px 1px #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
font-weight: bold;
background-image: url(images/TR_Gray2-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel2 .CollapsiblePanelContent {
background-color: blue;
#CollapsiblePanel3 .CollapsiblePanelOpen .CollapsiblePanelTab {
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
font-size: 18px;
line-height: 52px;
color: #FFF;
#CollapsiblePanel3 .CollapsiblePanelTabHover .CollapsiblePanelTab {
background-color: #003366;
color: #FFF;
text-shadow: 1px 1px #000;
font-weight: bold;
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel3 .CollapsiblePanelClosed .CollapsiblePanelTab {
background-color: #C3CFDF;
border-radius: 5px 5px 0px 0px;
color: #999
text-shadow: 1px 1px #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
font-weight: bold;
background-image: url(images/TR_Gray2-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel4 .CollapsiblePanelOpen .CollapsiblePanelTab {
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
font-size: 18px;
line-height: 52px;
color: #FFF;
#CollapsiblePanel4 .CollapsiblePanelTabHover .CollapsiblePanelTab {
background-color: #003366;
color: #FFF;
text-shadow: 1px 1px #000;
font-weight: bold;
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel4 .CollapsiblePanelClosed .CollapsiblePanelTab {
background-color: #C3CFDF;
border-radius: 5px 5px 0px 0px;
color: #999
text-shadow: 1px 1px #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
font-weight: bold;
background-image: url(images/TR_Gray2-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel5 .CollapsiblePanelOpen .CollapsiblePanelTab {
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
font-size: 18px;
line-height: 52px;
color: #FFF;
#CollapsiblePanel5 .CollapsiblePanelTabHover .CollapsiblePanelTab {
background-color: #003366;
color: #FFF;
text-shadow: 1px 1px #000;
font-weight: bold;
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel5 .CollapsiblePanelClosed .CollapsiblePanelTab {
background-color: #C3CFDF;
border-radius: 5px 5px 0px 0px;
color: #999
text-shadow: 1px 1px #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
font-weight: bold;
background-image: url(images/TR_Gray2-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
</style> -
In Windows 7 , I tunes library/ albums, I have many albums ( all the same) with different tracks in each.
Is it possible to consolidate the multiple cover photos into one ?Generally setting a common Album Artist will fix things, if not see Grouping tracks into albums.
tt2 -
In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?
scottiewade wrote:
Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
Hi
Wrong..
To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
Make sure that you have turned off Group Clutch (this disables all Groups)
Maybe this will help
http://support.apple.com/kb/VI248
CCT -
How can i use the same id on two different laptops?
When trying to use the same login on two different laptops so that i can connect my nook to either depending on which one is free, i get the error that the id is already in use on another computer?
The issue is embedded in the way the software works. To comply with the
Digital Millenium Copyright Act of 2000, all software companies in this
business keep track of where their software is installed, making
information about the computer and ereaders part of an ID file. So, your
user ID is embedded in the ID file of each computer, but each computer has
a different ID of its own that is also embedded in that file. Adobe's
master server (yes, there is one that you connect to even if you didn't
know it) also has that information, and when you try to use an ID on one
that's embedded in the file of another, Adobe's server blows the whistle,
and as you can see, you can't do that....
========== -
How can I get 2 different track from iTunes playing on 2 different stereos?
We are remodeling a part of our home and decided that this would be the time to install a whole house audio system. We would like to use our iTunes library as a source and be able to play different tracks in different parts of the house (also called zones)
To put it in a slightly different fashion. I could have a dedicated Mac Mini with my iTunes library and it would feed tracks with meta data to 3 stereos in various parts of the house. Each stereo independently select tracks or playlists.
iTunes purchased tracks need to work as well.
Thank you all....What you need is to use one Mac (or PC) as a server (and storing all the music) and then one of the following in each room connected to that rooms HiFi system.
Sonos ZonePlayer see http://www.sonos.com this is the most expensive option but is regarded as the premier multi-room solution.
Roku SoundBridge see http://www.rokulabs.com (I have three M2000 SoundBridges myself)
Slim Devices Squeezebox see http://www.slimdevices.com
Apple TV see http://www.apple.com/appletv (unlike all the above this will require the use of a TV)
With these, different rooms can play different tracks at the same time with them all stored on the single computer. -
I'm new to Spry. I have a couple of pages and on every page I
want to have the same menu. I include the JS-Code and a suitable
CSS-File, so I have to update the menu only once, if changes occur.
Now I want to use Spry in Dreamweaver, but how can I make a
menu in Javascript? Is there a better way? How do you this?
Greetings,
EgonHi Egon,
on Dreamweaver you can insert the spry menu bar from Insert
bar. It will be generated in page the menu bar code and the links
to the js and css files. If you want to use some different links
you can link them in this page and the menu will perfectly work.
Is this what you want or I was misunderstood your problem?
Diana -
Will a sequence return same value for two different sessions?
Is there a possibility that a sequence will return same value to two different sessions when it is referred exactly at the same instance of time?
@Justin... Thanks for your insight; indeed, we too feel this shouldn't ever happen and never heard of it either, but there it is. (No, we haven't logged a TAR yet -- whatever that is -- partly because it didn't occur to us and partly because we only recently came across the issue and sensibly want to do some testing before we cry foul.)
However, the code is pretty straight-forward, much like this (inside a FOR EACH ROW trigger body):
SELECT <seqname>.NEXTVAL INTO <keyvar> FROM DUAL;
INSERT INTO <tblname> (<keyfield>, <... some other fields>)
VALUES(<keyvar>, <... some other values> );
(where <tblname> is NOT the table on which the trigger is fired). This is the only place where the sequence is ever accessed. The sequence state is way below its limits (either MAXVALUE or <keyfield>/<keyvar> datatype size).
In this setup, end users sometimes got an out-of-the-blue SQL error to the effect that uniqueness constraint has been violated -- as I said, we used to have a unique index on <keyfield> -- which leads us to assume that the sequence generated a duplicate key (only way for the constraint to be violated, AFAIK). We released the constraint and indeed, using a simple SELECT <keyfield>, COUNT(*) FROM <tblname> GROUP BY <keyfield> HAVING COUNT(*)>1 got us some results.
Unfortunately, the <tblname> table gets regularly purged by a consumer process so it's hard to trace; now we created a logger trigger, on <tblname> this time, which tracks cases of duplicate <keyfield> inserts... We'll see how it goes.
@Laurent... winks at the CYCLE thing Our sequence is (needless to say) declared as NOCYCLE and the datatype is large enough to hold MAXVALUE. -
Same items moving on different pages
So, my "logo" and menu move around depending on which page you are on. I am placing different images behind the menu, so I have created a master page with menu only and then duplicated the page for different images to be place behind (so each page is it's own master, but duplicated from the same menu page). Some pages everything stays the same, some pages it moves. Any thoughts or suggestions? I have only just started this project so there isn't anything really there yet, but want to get this fixed before I continue on. http://yaboproductions.businesscatalyst.com/
Hi,
Kindly refer to the following forum post:
Re: Some pages aligned further left than others
Hope it helps,
Sonam -
Same Supplier supplying to different regions
HI All,
While running ASCP plan(We are using Enforce Demand Due Date Plan), what would be lead time if I am procuring from same supplier site for different organizations,
say I have org A in USA & Org B in UK, both getting supplies from same supplier site XYZ,
Supplier Site XYZ, Inventory Org A, Lead Time 30
Supplier Site XYZ, Inventory Org B, Lead Time 10
So now what will ASCP suggest if there is demand to procure for Org A from supplier site XYZ, will ASCP give lead time as 30 Days or will it give 10 Days considering its EDD Plan & will try to crush the lead time as small as possible? We use same data collection for both the orgs
Regards,
Vivek KYes Vivek, there is a solution for this also and below are the steps.
ASCP Planning will only support a single Global ASL for each Supplier / Supplier Site
You can create a separate supplier site for each requirement as per the following example:
SupplierA / SupplierSite_XYZ will supply 2 different organization and requires different planning attributes for each org it supplies.
This could include - In ASL Planning tab - Processing Lead Time, Supplier Capacity Calendar, Supplier Capacity values
You have organizations A, B
You can create new supplier sites to map each org - using the Org code makes it easier to keep track of different requirements
SupplierSite_XYZ_A
SupplierSite_XYZ_B
Then create Single Global ASL for each SupplierA / SupplierSite_XYZ_A and SupplierA / SupplierSite_XYZ_B combination listed above.
Thanks,
Abhishek Sharma
Please mark the post correct or helpful, if answered -
I am a recent convert to Firefox. Regarding bookmarks: it seems that you cannot create a new bookmark the same website in two or more different bookmark folders. For example, if I bookmark a website in a bookmark folder called 'ABC' and then bookmark the same website in a different bookmark folder called XYZ, the bookmark will be in XYZ, but will be removed from ABC. This happens even when I assign a different name for the bookmark in ABC and XYZ.
Is this the correct bookmark functionality or am I not doing something correctly? Thanks.You can do a Copy & Paste in the Bookmarks Manager (Shift+Ctrl+B) to create a copy of a bookmark.
You can also drag the (fav)icon on the left end of the location bar to a folder in the Bookmarks menu drop down list or to a folder in the side bar (Ctrl+B) or to the Bookmarks Toolbar.
In the side bar you need to click to the left of the icon to prevent Firefox from opening the bookmark. -
HT4059 Can I use Consolidate Files to move several different tracks into one Album?
Can I use Consolidate Files to move different tracks into one Album?
No, that's not what the Consolidate command is for. That command for getting all your track files into a single folder. To get all the tracks in an album to appear together, just Get Info on the tracks and make the album name all the same for each track. See:
http://samsoft.org.uk/itunes/grouping.asp
Regards. -
How do I make the menu title a different color when it is the active menu in Spry horizontal menu?
Dreamweaver CS5.5
Apple OS X.6.8
View site at: http://dorsay-easton-indian-law.com/staging/index.html
Steps:
1. Click link to land on Home page
2. View Home link in Spry horizontal navigation menu
Actual:
Home menu title is the same color as all of the others.
Expected:
The title of the active menu is color: #FFC.
I was hoping that a:active would give me this functionality, but that's not how it is described. Any suggestions are welcome!Nothing I have tried in the template makes the BODY tag editable. That's why I'm wondering how to disconnect the template from the individual pages. Adding an ID to each body tag is a prerequisite of the how-to page you supplied.
You don't make the <body> tag editable in a Template.
You make attributes of the <body> tag editable.
Don't disconnect the Template from the child pages.
Specify editable tag attributes in a template
http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7aa3a.h tml
In the Template:
Select the <body> tag (either in the Tag selector or click inside the <body> tag in Code View)
Modify > Templates > Make Attribute Editable
Select ID from the Attribute dropdown menu
If there's no existing ID attribute then click Add and type ID into the next dialogue box
Attribute: ID
Check the box to "Make attribute editable"
Enter anything into the Label field as a default e.g. foo
OK
Dreamweaver will change the <body> tag to read <body id="@@(foo)@@"....
Now the ID is editable
Save the Template and update the child page
In each child page:
Modify > Template Properties
Select the id attribute from the list (it's probably the only one listed)
Change its name in the box to whatever name matches your CSS rule for the active state for that page
OK
Save
Upload -
How do i make the same song have two different genre
how do i make the same song have 2 different genre for 2 different playlist?
In my example, we will create a Smart Playlist that includes all songs in the genre Acid Jazz and one extra song that has the genre of Afro-beat. That extra song will be "Music For Gong Gong". To create your Smart Playlist, substitute the genre types and the song title (anything with < > around it) for the ones you want.
In your iTunes Library, either click on the + symbol in the lower left corner of iTunes playlists, or click CTRL+ALT+N to create a New Smart Playlist. The following will appear (my orange numbering):
1. Using the drop-down menus, change "Artist" to Genre, "contains" to is and in the text box (marked 1) type in the text <Acid Jazz> (remember to chose the genre you want, and with the exact spelling used for that genre in your library - don't type in the < > obviously!)
2. Click on the + symbol at the end of that line (marked 2), which creates an additional line
3. In this new line, change "Artist" to Grouping, change "contains" to is and in the text box type in <Acid Jazz> (Notice that I have used the same name as the genre itself. You don''t have to, but it makes it easier to add those extra songs. You'll understand why in step 7.) You now have a box like this:
4. Change the Match rule at the top (notice it has already changed in the two screenshots above) to any. This is a crucial step, do not forget it.
5. Notice that I have also selected Match only ticked items. This is optional, but selecting it will exclude songs that have been unticked. If you use Sync only ticked songs and videos, this can be useful way of keeping the Playlist the same as the one on your device.
6. Click the OK button. You now have the opportunity to name your Playlist. I have chosen <Genre is Acid Jazz +> so that it is obvious what it is.
So that's the Playlist created. As you can see, <Genre is Acid Jazz +> has 89 songs in it and I can assure you that's how many songs are in the Acid Jazz genre section. Now, all that remains is to add the additional song.
7. Find your "two-genre" song and click File/Get Info/Info (or CTRL+I - that's an "eye") to bring up the edit song option. In the Grouping field, type in <Acid Jazz> (remember to use the same text you used in the Grouping box in step 3. This means you only have to type in the same genre name to the Grouping box, to get it into that particular Playlist. I mentioned this in step 3).
Notice that we are not changing the Genre. Click the OK button.
Now look at the Playlist <Genre is Acid Jazz +> again.
Notice that is now has 90 songs and at number 60 is the <Music For Gong Gong>. Note that the genre for that song is still Afro-beat, so the song still appears in the genre Afro-beat as well.
To add any other song to this particular two-genre Playlist, simply find the song in your Library and type <Acid Jazz> into the Grouping box, as in step 7. It's that simple!
Here's an extra tip. Too many Playlists and having issues finding your way through them?
I have renamed the Playlist Genre is Acid Jazz + so that it is now named Acid Jazz Plus and I've dropped it into a Playlists Folder named GENRES (capitals makes it easy to find the folders on iDevices).
Notice that here in iTunes, Playlists are sorted in the following order:
Playlist Folders (and then the Smart Playlists and Regular Playlists inside it)
Smart Playlists
Regular Playlists
... but on my iPod Classic (for example), they are sorted in alphabetical order. So to find the Playlist Acid Jazz Plus, go into the Playlists menu and scroll down to G, go into GENRES, and in there will be Acid Jazz Plus, with all 90 songs!
I hope you will give this a try, you have nothing to lose but a little time. Let us (all) know how you get on with it. We'd like to know.
Maybe you are looking for
-
IPhoto 5 can't find my pictures after installing a new hard drive.
I had a corrupted hard drive which I was able to get going again with Disk Warrior. I backed up my i Photo Library on external storage and then installed the new drive and reinstalled OS 10.4.10 on my old G4. I then installed iLife 05 and tried to op
-
How can i import photos from a cd
When I drag the photo from the cd to my events in iPhoto, it says that it is importing, but it never shows up.
-
I am running Windows Server 2003, and Exchange 2003. The user has had no previous problems with connections, until her OS update.
-
New GL Accounting in ECC 6.00
Hi all, we activated new GL accounting in ECC 6.00 for our customer. as per new GL Accounting sap replaced tables GLT0, GLPCT, GLFUNCT by FAGLFXT (updated records in all these tables) and GLPCP(updated) by FAGLEXP(not updated) and GLPCA(update
-
Resetting Firmware Password on Macbook
Hi Guys, Im new to Apple Forums as well as Apple Products. My Device Specs: -Macbook Air (13-inch, Early 2014) -Processor 1.4 GHz Intel Core i5 -Software OS X 10.9.4 (13E28) So here's my problem. This MacBook was bought from my school by a company