Same plugin multiple versions applied

Hi,
I have same plugin multiple version as applied. Its really strange, how this happened.
Navigation path - Setup - Extensibility - Self Update - Plug-in Updates ... Here it shows different versions of the same plugin as applied.
So, I went to Setup - Extensibility - Plugins , so that I can deploy them from servers - But that plugin is not listed.
This is blocking my use of newer version of plugin (testing)
Please let me know, how to clear this.
Thanks,
Muthu
Edited by: muthuveerappan on Jun 4, 2012 5:34 AM

Hi Loc Nhan,
I got the below output after running the command.
#> ./emcli list_plugins_on_server
OMS name is EMGC_OMS1
Plug-in Name Version [revision]
Oracle Database 12.1.0.1.0
Oracle Exadata 12.1.0.1.0
Oracle Fusion Middleware 12.1.0.1.0
Oracle MOS (My Oracle Support) 12.1.0.1.0
Exalogic Elastic Cloud Infrastructure 12.1.0.1.0
Oracle Enterprise Taxation and Policy Management 12.1.0.3.1
I have plugins folder too with the following contents (ls-l) /orasw/Oracle/Middleware1035/plugins
drwxr-xr-x 8 oracle oinstall 4096 Mar 22 05:27 oracle.em.soee.oms.plugin_12.1.0.1.0
drwxr-xr-x 15 oracle oinstall 4096 Mar 22 05:48 oracle.sysman.db.oms.plugin_12.1.0.1.0
drwxr-xr-x 17 oracle oinstall 4096 Mar 22 05:48 oracle.sysman.emas.oms.plugin_12.1.0.1.0
drwxr-xr-x 11 oracle oinstall 4096 Mar 22 05:48 oracle.sysman.mos.oms.plugin_12.1.0.1.0
drwxr-xr-x 11 oracle oinstall 4096 Mar 22 05:48 oracle.sysman.xa.oms.plugin_12.1.0.1.0
drwxr----- 8 oracle oinstall 4096 Jun 4 04:06 oracle.tugbu.oet.oms.plugin_12.1.0.3.1
Now, multiple versions of same plugins are installed (and thats fine), The concern is I don't see any plugin listed under - > Setup - Extensibility - Plugins
If its listed, I can select and un-deploy ...
I just want to un-deploy and remove/delete, but not able to do so.
Please help.
Regards,
Muthu

Similar Messages

Multiple versions of the same RAW image

Hi All,
It's posible to have multiple versions of the same RAW file. Let's say I work my RAW file and make some changes, can those changes become an independent file? I want to be able to go back to the original RAW file without loosing any other version already created.
Best regards,
Jose

Hi Kim,
May be you can try this and see if this works for you. I am not 100% sure if it will work for you, but worth a try I guess. Create a Test WebDynpro project and try the following steps on this project. If they work out correctly and serve the purpose for you only then try them on your actual Web Dynpro project.
1. Create a test Web Dynpro project say "TestWDProject" with Component say "Comp1" and the default views and windows etc.
Also create some working application our of this component and Windows using the Context.
2. Right click the "Comp1" and select Copy.
3. Right click 'Components" node in the project structure and select "Paste"
4.This step will try to paste the copy of Comp1 as a new Component.
5. You can change the Name and Package of the Component.
6.Similarly you'll get the prompts for views,windows etc.
7.Once you have copied everything, Just check if everything looks good.
8.Now you can create a new Application using this new component and the Component Interface View and Deploy it.
9.Test whether the Application created out of this copy works same as the original component.
You can also try to create another Web Dynpro project and paste the Comp1 in the Components node of that new project and perform the same steps.
Again, try with these Test Projects and see if this serves your purpose before applying the steps on actual projects.
Regards,
Ajay

Multiple versions of the same Web Dynpro application on the same SAP Portal

I have a single application (local development) and deploy directly to a SAP Portal(NW 7.0) from NWDS Version: 7.0.15
No problems there, works like a charm.
But I want to have multiple versions of the same application on one portal. Eg. ill build a version 1.0 for test and deploy this. Then continue to work on version 1.1 deploying this directly on the portal. The two versions should now co-existing under different names and/or packages.
Please help.

Hi Kim,
May be you can try this and see if this works for you. I am not 100% sure if it will work for you, but worth a try I guess. Create a Test WebDynpro project and try the following steps on this project. If they work out correctly and serve the purpose for you only then try them on your actual Web Dynpro project.
1. Create a test Web Dynpro project say "TestWDProject" with Component say "Comp1" and the default views and windows etc.
Also create some working application our of this component and Windows using the Context.
2. Right click the "Comp1" and select Copy.
3. Right click 'Components" node in the project structure and select "Paste"
4.This step will try to paste the copy of Comp1 as a new Component.
5. You can change the Name and Package of the Component.
6.Similarly you'll get the prompts for views,windows etc.
7.Once you have copied everything, Just check if everything looks good.
8.Now you can create a new Application using this new component and the Component Interface View and Deploy it.
9.Test whether the Application created out of this copy works same as the original component.
You can also try to create another Web Dynpro project and paste the Comp1 in the Components node of that new project and perform the same steps.
Again, try with these Test Projects and see if this serves your purpose before applying the steps on actual projects.
Regards,
Ajay

Multiple versions of PSE on same computer.

Can multiple versions of PSE be installed and used on one computer, e.g. PSE5, PSE8, PSE11, and PSE 13. Will there be conflict or other kinds of problems? Are the different versions in any way connected or are they each entirely stand alone with "touching" each other? Or, another way of putting this is, do I have to uninstall prior versions of PSE before installing a newer version on the same computer? Thanks for any advice you can offer.

rgthoman a écrit:
Is this true of the organizer as well as the editor? If files are stored in the organizer of one version, are they readily accessible for editing in another version?
That has nothing to do with several versions. Files are NOT stored in the organizer. They are somewhere on your drive(s). If you have a single Elements version and several catalogs pointing to the same files on your drive(s), each catalog will be able to access the same files... until you move, rename or delete them from another catalog.

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How do I have multiple versions of the same .chm?

Our developers recently were required to make changes to an earlier version of our software (thank goodness for backups). So I'm having to revert to that earlier version, make changes, and create a revised .chm. HOWEVER, I already had completed the upcoming release's .chm and don't want to lose all of those changes. To make matters more complicated, I also have requests for changes to the Help for the future release.
So, how does everyone have multiple versions of the .chm on their system at the same time and keep them separate, yet compile the right files with the right version? I had thought I could just create a new folder with the files that changed for the various versions, but updating them in Word 2007 is not a pretty proposition. I'll then have to import them in and replace the "old" ones. There has to be an easier way! I'm sure other people do this on a regular basis, but this is the first time I've had to go back a version, maintain the next version, and start work on a yet-to-be-released version all at the same time.

It never ceases to amaze me how questions on the forum are like buses, none for an hour then three come along. Not your fault but this was asked just a couple of days ago.
When your developers issue a new version you need to save a copy of the source, we just zip it up. Then you carry on editing for the next version and zip that up and go again.
Then when a change is required to an older version, you dig it up, amend it and zip it again.
Not sure how it works with source control. The above is easier and reliable, assuming you manage it tightly.
See www.grainge.org for RoboHelp and Authoring tips

Can I install multiple versions on same computer

Can I install multiple versions of Elements on same computer? Especially out of rder. I have 12 installed but would like t istall 8, 10, and 11
.

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Can iTunes handle multiple versions of the same app?

Now that iTunes, iOS, and iDevices have been around long enough for users to have multiple devices on multiple iOS versions, is Apple doing anything to allow users to run multiple versions of the same app through iTunes?
Case in point I have an older iPhone running iOS-5 with a few apps that are now running exclusively on iOS-7, my new iPhone is on iOS-7. Once I sync my new phone with the updated versions of the app, iTunes usually dumps the old version into the trash bin. But what if I need that older version to continue running it on my iOS-5 iPhone?
Is there a workaround for this? I've considered using an old PC as my base computer for sycning the new iPhone, but I still fear that the new app updates will go to all devices running on my iTunes account through iCloud.
If Apple doesn't address this problem at some point then as the years go by certain iDevices will eventually become completely useless even if they are a fully functional piece of electronics.
(spare me the "that's their plan, corporate greed" replies).
Thanks in advance!

Yes, the apps SHOULD be developed to work with the new stuff, No, not all apps keep their old versions in the App Store, BUT, finally Apple has ALLOWED developers to have multiple versions of an App in the store.
The problem isn't about retarding development, it's about Apple trying to force users to buy new things that they don't need because the old thing, though it works just fine & has the apps that you need, is unable to be used because the apps have been updated in iTunes. Why can't you allow me to keep Facebook 5.0.1 for my old iPhone 3G that is used as an iPod, Facebook 6.7.2 for my iPod Touch & Facebook 19.6.4 for my new iPhone 8? As of now I can download the old version on the old device, but when I sync it it always tries to 'Update' it & then says 'Can't be updated because this version is incompatible with this device' making the sync take 3x as long & meaning that if my device crashes for some reason or I choose to restore it becasue of problems I have to go find the old version, hoping that I saved it, delete the new version, drag in the old version, THEN sync & then move the old version back before updating from my other device (Having done this with the 3G & iTouch 4 for years I learned that when the sync transfers purchases from the phone it 'replaces' the file instead of moving the old 1 to the trash).
Some of these apps I have purchased, & by forcing the update to remove the old version Apple is essentially taking something I have purchased & saying I am no longer allowed to use it.
Just in the what 3 months since the new iOS came out I have noticed that now over half of the apps can't be run on my iPod Touch 4G.
It's simple, iTunes should either:
Keep a record of the devices that have synced (I know, it already does) & keep the newest version for the lated iOS in iTunes
Let users have multiple versions of the same app in iTunes & allow us to disable update checks for certain apps
Allow users to choose to download from iTunes the different versions of the apps available from the developer
OR
Allow users to edit the info on Apps, unlinking them from their original & updates & allowing users to keep an old version & still download a new 1

Can i give multiple versions in purchase inforecord for same vendor and mat

can i give multiple versions in purchase info record for same vendor and mat code..is is possible??? plz help me
thanks and regards
Ramesh Reddy(VALLUR)

HI,
No .where you are getting version in purchasing info record ? why you want version ? suppose we put version then where you used that version ?
to get clear picture regarding purchasing info record
check following link
[http://help.sap.com/saphelp_46c/helpdata/en/75/ee102f55c811d189900000e8322d00/content.htm]
Regards
Kailas Ugale

In windows how do we install and activite multiple versions of tuxedo at the same time ?

Hi All,
In windows how do we install and activate multiple versions of tuxedo at the same time ?
Advance wishes

You can run different versions of Tuxedo on the same server, as long as they are installed in different directories.
See PeopleTools 8.53 installation manual Task 3-1: Installing Oracle Tuxedo
You can install Oracle Tuxedo once for each release on a machine, regardless of the number of PeopleSoft
applications or databases the server supports. For example, if you are a PeopleSoft 9.1 customer and have
Oracle Tuxedo 6.5 installed, you may install Oracle Tuxedo 6.5 and Oracle Tuxedo 11gR1 on the same
machine in separate directories. For example:
On Windows, you may install into C:\oracle\tuxedo11gR1_VS2010 and C:\tux65.
On UNIX, you may install into /home/oracle/tuxedo11gR1 and /prod/tuxedo/6.5.
E-TUX: Can Multiple Versions of Tuxedo Coexist on One Physical UNIX or Linux Server? (Doc ID 607828.1)

Multiple versions of Shared Variables on same network

I have 2 seperate reactors working on the same network each deploying ~50 shared variables (different names on each process) communicating with LV 8.5RT running on FP hardware. One of the reactors is requested for new features and to be upgraded. Is it possible to heve 2 different shared variable engines (8.5 and 2010) and versions on the same network and client computer, or am I asking for trouble.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA
Solved!
Go to Solution.

I believe we address this here: http://forums.ni.com/t5/LabVIEW/multiple-versions-of-Shared-Variables-on-same-network/m-p/1487366#M5...
Sam S
Applications Engineer
National Instruments

Running multiple versions of iTunes on the same PC?

I like to always have the latest version of iTunes on my machine, but I also need to keep an older version (7.5 or lower) on my machine for compatibility reasons (please don't ask why - I just do). Is it possible to install multiple versions of iTunes on the same PC (using XP and/or Vista)? If this is not possible by simply installing in different folders, I'm guessing that I can use this "virtualization" that I've been hearing about. I've used Parallels on a Macbook before, but what can I use to create a virtual machine on a PC? Is there a free program that does this?
Any help would be greatly appreciated.

Virtual PC can do it, but it's not free. I think VMware as well, but likely not free. Actually, it seems you can evaluate VMware:
http://www.vmware.com/download/

Search in Mail yields multiple versions of the same email

I wasn't able to find any other postings on this, but this has been bugging me for a while now . . . just not big enough of a deal to do anything about. Whenever I do a search in Mail, the results give me multiple versions of the same email, in different stages of completeness. Is there some setting that I have inadvertently turned on that keeps back ups of my draft emails every few seconds? Anyone else have this annoying problem?

I too am having this problem. Doesn't seem to happen all the time though. No rhyme nor reason ? I am using an IMAP account if this helps ?
Message was edited by: Visioneer

HT201616 Multiple versions of same song by different artists

iTunes used to have a feature where you can view multiple versions of the same song by different artists. Is there still a way to do this without having to search through the entire iTunes store? That way takes forever and I have to sample tracks that are completely unrelated, but just happen to have the same title. Why in the world would the dumb iTunes geeks take this feature away. Someone please help. Thanks!

Have not been in ITUNES Store in quite awhile but
If it was a function, it would rely on the person or persons who authored the song to insure you did get the same lyrics so to speak.
So, if you didn't know the artist you wanted - or the authors of the song - you would have to sample them until you hit the correct one.
Itunes did grow over time - and if they did have cross reference by authors they may have removed it - on the other hand like searches may have worked because of a limited database at the time - it did seem to start adding songs based on searches that brought up nothing one time - and a month later there they were.
ITUNES has over time added restrictions - for instance at some point - you had to allow this computer on Itunes in order to have itunes synchronize to an IPOD (I purchased about 6 songs on old mac - after migration synchronized fine until they stopped - finally mac allowed more than one device so I could add this one and synchronization started again).
Here are latest restrictions with windows and Mac if you want to burn CD's of your itunes
cant burn cd in itunes
http://support.apple.com/en-us/HT203173
http://support.apple.com/en-us/HT203164
http://support.apple.com/kb/PH12147?viewlocale=en_US&locale=en_US
Important: You can’t burn movies and TV shows purchased from the iTunes Store to a DVD or VCD that plays in a DVD player or to a Video CD.
http://support.apple.com/kb/PH12149?viewlocale=en_US&locale=en_US

Same plugin multiple versions applied

Similar Messages

Maybe you are looking for