Same Question (0x3b21 error) Different Day

I have a Blackberry 8100 Series Pearl
The Device Platform is Version 3.2
The Application is Version 4.5
DM Version 4.7
I am running this on Windows XP 2002 and I am trying to connect with Outlook.  I recently had a Trojan horse virus which I eliminated.  I believe that this virus caused my BB to stop syncing with my Outlook Calendar about a week ago.  After eliminating the virus, I updated my BB and DM software online to the above versions.  Since the update, I have been receiving the 0x3b21 error code and have not been able to synch my calendar or my address book. 
I have attempted to follow the "How to determine which application is being process when Intellisync fails" and "How to turn on advanced sychronization logging for Intellisync when BlackBerry smartphone synchronization fails" solutions.  One of my problems is that my DM does not have the Intellisync button, that is where I get stuck with the directions and can not continue.  I have been at this for about a day and am quite frustrated. I have read a majority of the previous posts, but usually end up at the same point.  Any help would be greatly appreciated and please let me know if there is any additional information that you would like or need.  Sorry, I forgot to actually ask a question: How to I get my BB to start syncing again?

-Delete the Intellisync folder.   
     Close the desktop manager application.
     Disconnect the BB from the computer.
     Double Click on My Computer > Local Disk (C Drive > Documents and Settings > (username) > Application Data > Research In Motion > Blackberry > Intellisync.          
     Note: If the Application Data folder is not present, click Tools>Folder Options at the top of the screen.
     Click the View Tab, then click on Show Hidden Files and Folders.
     Click Apply>Ok and continue through the remaining steps.
     Delete everything within the Intellisync folder.
     Launch desktop manager and attempt sync the device with the computer.
~Tami~
Intellectuals solve problems; geniuses prevent them.
-- Albert Einstein

Similar Messages

  • ICal has dropped a monthly event for the previous four months....... why did it disappear? and where is it?  It was the same event but a different day each month.

    iCal has dropped a monthly event for the previous four months....... why did it disappear? and where is it?  It was the same event but a different day each month.

      I installed this same digitizer in my T|X some weeks ago.  Some discussion of my experience may be found in this Usenet posting and subsequent thread.
      The stock digitizer in my T|X had always had some significant alignment issues (for which PowerDigi was able to compensate very nicely) and sensitivity which was uneven, but which usually required a heavier touch than I liked.
      Eventually, it began to develop a “dead spot” near the upper left.  My T|X was under warranty, so I probably ought to have sent it in to Palm to be repaired, but I wasn't willing to be without it for the required amount of time, and I've heard enough reports of other T|X owners getting unsatisfactory results this way.  I'd heard enough good reports about the PDAPARTS.COm digitizer, that I decided that the only acceptable way to repair my T|X would be to install one of those.
      After however many weeks it has been, I am still very pleased with the results.  It continues to work flawlessly; it is much more sensitive, so it doesn't require nearly so heavy a touch, and I very much like the hard feel that it has, compared to the spongier feel of the stock digitizer.
      My wife's T|X still has its stock digitizer, and it has so far not shown any of the same problems that mine did, or for which the T|X has become notorious, but the feel is noticeably inferior.  She's content with it the way it is, but I think that if I were to ever buy another T|X for myself, I wouldn't wait for the stock digitizer to fail.  The PDAPARTS.COM digitizer is simply superior in every imaginable way; and, in my opinion, a T|X with the PDAPARTS.COM digitizer installed is sufficiently superior to one with the stock digitizer (even if it isn't defective) to be very much worth the expense and trouble of installing it.
    Post relates to: Palm TX

  • I was referred to this site when I looked for answers to why I got Fatal Error message with error code c0000005 when trying to upload photos to my computer. I see that someone else asked the same question, 90 people viewed but no answer given?

    I was referred to this site when I got Fatal Error message Error code c0000005 while trying to upload photos to computer. Someone else asked the same question in this forum, 90 people viewed the question but it was never answered?

    It looks to me like it is a problem on your Windows computer not being able to start an application. See the following link to Microsoft Community support (although the specifics of the problem in that case may not be applicable) and also note all of the "Related Content" at the upper right side of that link (and there may be others if you search that forum). http://answers.microsoft.com/en-us/windows/forum/windows_7-system/the-applicatio n-is-unable-to-start-correctly/bbb9c037-77b3-4fae-93b9-ded70f7f9a17
    It may help if you know or can determine which program Windows is trying to open when you upload photos -- there can be many different ones and it can be set by the user. If you are using Windows 7, you may need to check your Autoplay settings. There are some instructions in the following link that may help and that discuss how you can use Windows Explorer to manually transfer the photos: http://support.apple.com/kb/HT4083

  • The same payment term with two different Day Limit

    Hello Experts,
    I have the same Payment terme AAAA: 45 days, end of the month for two different Day Limit (15 and 31)
    2 calcul mode are possible :
    1/ fixed date :31 + additional months :1
    2/ fixed date :31 + additional months :2
    Actually this is the second method in use and according to the informations I have it should be the first one.
    Then the user for the 16/04/2010 as Baseline date, is expecting the end of May ( 16 + 45 days >> 31th of May > 31/05) But the system calculate it for the 30/06/2010.
    I want to understand the settings and how to correct.
    Thank you in advance

    Hello,
    Need your answers

  • Getting same index size despite different table size

    Hello,
    this question arose from a different thread, but touches a different problem, which is why I have decided to post it as a separate thread.
    I have several tables of 3D points.
    The points roughly describe the same area but in different densities, which means the tables are of different sizes. The smallest contains around 3million entries and the largest around 37 million entries.
    I applied an index with
    CREATE INDEX <index name>
    ON <table name>(<column name>)
    INDEXTYPE is MDSYS.SPATIAL_INDEX
    PARAMETERS('sdo_indx_dims=3');
    My problem is that I am trying to see how much space the index occupies for each table.
    I used the following syntax to get the answer to this:
    SELECT usim.sdo_index_name segment_name, bytes/1024/1024 segment_size_mb
    FROM user_segments us, user_sdo_index_metadata usim
    WHERE usim.SDO_INDEX_NAME = <spatial index name>
    AND us.segment_name = usim.SDO_INDEX_TABLE;
    (thanks Reggie for supplying the sql)
    Now, the curious thing is that in all cases, I get the answer
    SEGMENT_NAME SEGMENT_SIZE_MB
    LIDAR_POINTS109_IDX .0625
    (obviously with a different sement name in each case).
    I tried to see what an estimated index size would be with
    SDO_TUNE.ESTIMATE_RTREE_INDEX_SIZE
    And I get estimates ranging from 230MB in the case of 3million records up to 2.9 for the case of 37million records.
    Does anyone have an idea why I am not getting a different actual index size for the different tables?
    Any help is greatly appreciated!!!
    Cheers,
    F.

    It looks like your indexes didn't actually create properly. Spatial indexes are a bit different to 'normal' indexes in this regard. A BTree index will either create or not. However, when creating a spatial index, something may fail, but the index structure will remain and it will appear to be valid according to the data dictionary.
    Consider the following example in which the SRID has a problem:
    SQL> CREATE TABLE INDEX_TEST (
      2  ID NUMBER PRIMARY KEY,
      3  GEOMETRY SDO_GEOMETRY);
    Table created.
    SQL>
    SQL> INSERT INTO INDEX_TEST (ID, GEOMETRY) VALUES (1,
      2  SDO_GEOMETRY(2001, 99999, SDO_POINT_TYPE(569278.141, 836920.735, NULL), NULL, NULL)
      3
    SQL> INSERT INTO user_sdo_geom_metadata VALUES ('INDEX_TEST','GEOMETRY',
      2     MDSYS.SDO_DIM_ARRAY(
      3     MDSYS.SDO_DIM_ELEMENT('X',0, 1000, 0.0005),
      4     MDSYS.SDO_DIM_ELEMENT('Y',0, 1000, 0.0005)
      5  ), 88888);
    1 row created.
    SQL>
    SQL> CREATE INDEX INDEX_TEST_SPIND ON INDEX_TEST(GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
    CREATE INDEX INDEX_TEST_SPIND ON INDEX_TEST(GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: SRID 88888 does not exist in MDSYS.CS_SRS table
    ORA-29400: data cartridge error
    Error - OCI_NODATA
    ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
    SQL> SELECT usim.sdo_index_name segment_name, bytes/1024/1024 segment_size_mb,
      2  usim.sdo_index_status
      2  FROM user_segments us, user_sdo_index_metadata usim
      3  WHERE usim.SDO_INDEX_NAME = 'INDEX_TEST_SPIND'
      4  AND us.segment_name = usim.SDO_INDEX_TABLE;
    SEGMENT_NAME                     SEGMENT_SIZE_MB SDO_INDEX_STATUS
    INDEX_TEST_SPIND                           .0625 VALID
    1 row selected.
    SQL>When you ran the CREATE INDEX statement did it say "Index created." afterwards or did you get an error?
    Did you run the CREATE INDEX statement in SQL*Plus yourself or was it run by some software?
    I suggest you drop the indexes and try creating them again. Watch out for any errors. Chances are its an SRID issue.

  • Send different mails automatically on different days-Auto Responder

    I need to develop an Auto Responder application where my application has to send different mails to different types of Auto Responder customers.These mails should be sent to these customers every x days after their subscription i.e., once a customer has subscribed for this Auto Responder he will be recieving a mail 3rd day after subscription,then 7 days after subscription and then 10 days after subscription.This will vary on the particular auto responder to which the client has subscribed.
    I got the suggestion that using timer and timer task classes in the java mail will be helpful.But can anyone tell me how to use these methods to send different mails to different customers on different days. I need it urgent.

    Hi
    in the last reply, i mentioned using of timer and timertask classes to send mails.
    I got ur problem. I believe the Days X is fixed for each auto responder. I mean for auto responder1 days are 3,7,10 , for autoresponder2 days are 5,8,10 ... etc
    R u using any database, if yes follow Soultion 1 otherwise follow Solution2
    1)
    Create two tables in database
    table a is autoresponders table
    schema
    Autoresponderid
    AutoResponderDescription
    AutoResponderMailFormat
    AutoResponderDays(comma deliminated numbers ex: 1,3,5,10.. ) ( i belive Days x is fixed and with varying difference, if it is fixed difference ie 1, 5, 9 with a diff of 4 then we need autoresponderinterval instead of autoresponderDays )
    Table b is CustomerTable
    CustomerID
    Customer Name
    AutoResponderID(Foreign key to autorespondertable)
    Fill out appropriate responders data and customer data
    Now almost the problem is solved.
    I am focusing on main task sending mail
    I have explained already how to send mail in JSP forum for your question. Please refer that.
    Suppose we assume autorespondertable contains 5 rows.
    and customertable contains 10 rows(10 customers)
    Now the logic is
    Create a common TimerTask which has attributes same as autoresponder row.
    Create a Thread(TimerTask in this case), for each row in autoresponder table(in our case 5 TimerTask 's are created)
    Follow these steps(Implement the logic in run method of TimerTask).
    1) Read rows of all customers whose autoresponder is this id
    2) Notice there subscription date, do some work on that date and compare with autoresponderdays data. (suppose if customer subscribtion date is 20/07/2005, todays date is 23/07/2005, if autoresponder day is 3 , take the diff between two dates and compare with autoresponder date) if yes
    Read MailFormat for that autoresponder and add customer name, blah blah, use JavaMail Mail api and send it . and
    3) Important this TimerTask must be scheduled for every day
    i,e. Please have a look to my reply in JSP forum. It should be
    INTERVAL=1000*60*60*24 (1 day)
    4) it checks every day all the autoresponders
    If u want me to write the code, i can provide that
    cheers
    Rajendra Bandi

  • Yes i keep ashing the same question i keep getting the same answer and it is not resolving the problem

    YES I KEEP ASKING THE SAME QUESTION I KEEP GETTING THE SAME ANSWER AND IT IS NOT RESOLVING THE PROBLEM AND CHAT KEEPS SENDING ME BACK TO THE FORUMS THEY SAY THEIR EXPERTS WILL BE ABLE TO RESOLVE THE PROBLEM BUT IT IS NOT RESOLVED YET I KEEP GETTING THE SAME ANSWER FROM FORUM EXPERTS WELL THAT IS NOT WORKING I NEED A SOLUTION THAT WILL WORK I PAID FOR THIS AND I WANT TO USE IT BUT I CANNOT
    TRYING TO ACTIVATE A trial version of photoshop elements 7.0 disc worked till in the middle got an erroe fur and animalskin file missing checked dvd and it had a scratch so 3 times i downloaded a trial version of photoshop elements 7.0 from adobe.com but when try to activate get invalid serial number the website said have your serial number ready to activate which i do because i am getting it right from the dvd case it is registered i am signed in and chat just keeps telling me it is too old try the forums which i have many times with no resolution but they mark it as assumed resolved premeir elements 7.0 from the same dvd case is on why can't i activate trial version of photoshop elements 7.0 my computer crashed and i had to restore then i am now trying to put the programs
    maybe i can buy or exchange the dvd of photoshop elements 7.0 without because my serial number is good so i maybe just need a new disc being this disc is scratched i've got 40 to 50 hours into this 1 trial version of photoshop elements 7.0 more than i have in the whole computer restore and all the other programs i have restored have windows xp service pack 3 or 3.5 and net framework 4.0 and all the important and required updates i also have an open case which i am getting no where either case #213952591 which i responded to within 4 days as not resolved but i am still getting no help activating this trial version of photoshop elements 7.0
    24 Views
    Tags:

    YES I KEEP ASKING THE SAME QUESTION I KEEP GETTING THE SAME ANSWER AND IT IS NOT RESOLVING THE PROBLEM AND CHAT KEEPS SENDING ME BACK TO THE FORUMS THEY SAY THEIR EXPERTS WILL BE ABLE TO RESOLVE THE PROBLEM BUT IT IS NOT RESOLVED YET I KEEP GETTING THE SAME ANSWER FROM FORUM EXPERTS WELL THAT IS NOT WORKING I NEED A SOLUTION THAT WILL WORK I PAID FOR THIS AND I WANT TO USE IT BUT I CANNOT
    TRYING TO ACTIVATE A trial version of photoshop elements 7.0 disc worked till in the middle got an erroe fur and animalskin file missing checked dvd and it had a scratch so 3 times i downloaded a trial version of photoshop elements 7.0 from adobe.com but when try to activate get invalid serial number the website said have your serial number ready to activate which i do because i am getting it right from the dvd case it is registered i am signed in and chat just keeps telling me it is too old try the forums which i have many times with no resolution but they mark it as assumed resolved premeir elements 7.0 from the same dvd case is on why can't i activate trial version of photoshop elements 7.0 my computer crashed and i had to restore then i am now trying to put the programs
    maybe i can buy or exchange the dvd of photoshop elements 7.0 without because my serial number is good so i maybe just need a new disc being this disc is scratched i've got 40 to 50 hours into this 1 trial version of photoshop elements 7.0 more than i have in the whole computer restore and all the other programs i have restored have windows xp service pack 3 or 3.5 and net framework 4.0 and all the important and required updates i also have an open case which i am getting no where either case #213952591 which i responded to within 4 days as not resolved but i am still getting no help activating this trial version of photoshop elements 7.0
    24 Views
    Tags:

  • How can i use the same id on two different laptops?

    When trying to use the same login on two different laptops so that i can connect my nook to either depending on which one is free, i get the error that the id is already in use on another computer?

    The issue is embedded in the way the software works.  To comply with the
    Digital Millenium Copyright Act of 2000, all software companies in this
    business keep track of where their software is installed, making
    information about the computer and ereaders part of an ID file.  So, your
    user ID is embedded in the ID file of each computer, but each computer has
    a different ID of its own that is also embedded in that file.  Adobe's
    master server (yes, there is one that you connect to even if you didn't
    know it) also has that information, and when you try to use an ID on one
    that's embedded in the file of another, Adobe's server blows the whistle,
    and as you can see, you can't do that....
    ==========

  • How to use same DFF for two different forms with :BLOCK.field reference

    Hi,
    Can anyone suggest how to use the same dff in two different forms by using :BLOCK.field reference.
    Scenario is the same DFF is referenced by two forms, viz. Form-1 & Form-2.
    Form-1 Reference Field is :BLOCK.field name, but the same block is not available in Form-2, which throws an error while opening it.
    Any pointers please.
    Thanks,

    In the environment I currently have access to do not have similar setup.
    Let say you setup the DFF1 default value to $HEADER.customer_name, the name of the DFF is CUSTOMER_NAME, description can be anything.
    In DFF2, default value should be a SQL, where you can reference the DFF1. For example, SELECT DECODE($FLEX.CUSTOMER_NAME, 'ABC', 1, 'DEF', 2, NULL) FROM dual
    In this case, you can reference the DFF1.

  • Setting up Lion FaceTime to connect to iPad on same account but in different places

    HI,
    This may seem like a dumb question....I am going away on Tuesday and am taking my iPad2 - we are very familiar with using Facetime on the iPad.  We just got Lion on the iMac and it now has FaceTime, but I have not set it up...I want to use FacTime on the iMac to chat to my family from the iPad while I am away.  Do I need to set up a different FaceTime account on the IMac so that I can connect to it from the iPad2? Or can I call from the iPad to the iMac using the same account...?  i.e. does it recognise that even though its the same account its 2 different devices in 2 different places....
    Hope that makes sense...?
    Thanks

    On his iPad, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign in with the other ID.   For FaceTime, do the same thing in Settings>FaceTime. 
    If you need to change his iPad to a separate iCloud account go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from his iPad, not from iCloud.  Your iPad will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPad.  Next, set up a new iCloud account using a separate Apple ID, turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Finally, if you have any of each other's data in your iCloud accouts you'll have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want from each account (such as deleting the your contacts from his account, and vice versa).

  • When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported.  Is this a bug in Mavericks?

    When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported. 
    This happens not just with the SSD in my Mac Mini, but with another SSD in my MacBook (both now running Mavericks).  So far as I know, all of the kit I am using is in good order (despite the file corruption reports).  So I am beginning to wonder if it could be due to a bug in Mavericks?  Both SSD drives have been formatted to MacOS Extended (journaled) format.  Should I have used a different format, I wonder?
    Has anyone else encountered this issue?
    Does anyone have a solution?
    Or an explanation that might help my investigation of the issue?
    Thanks guys,

    I understand that the Corsair Force 3 is not one of the SSD drives that are supported on Apple Macs. 
    I did try downloading and using Trim Enabler, but the error message came up both when it was off and when it was on.
    I understand that not everyone thinks Trim Enabler is a good program, though there is a new version out now, so I may give it another try.

  • Internal order - Error - Different logical system for order

    Hello all,
    I try to send IDoc (INTERNAL_ORDER) from system A to system B.
    I have done:
    - BD64 / WE20 / WE21
    But after having customizing I have got following error:
    Different logical system for order xxxxxx
    Message no. 2075ALE001
    Diagnosis
    Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
    System Response
    Internal order xxxxxxx with master system A cannot be distributed in system B.
    Procedure
    Check customizing for ALE for internal orders.
    How to solve this?
    My aim is to maintain internal order master data in test system.
    Thanks for your help.
    David

    I have found something.
    If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
    Then: how to define "master"?

  • Using same program-id in different RFC adapters

    Hi,
    I have the following question:
    Is it possible to use the same program-id in different RFC adapters for the same SAP backend?
    In gerneral, what are the naming-conventions or best practices for using program-ids for RFC adapters?
    Thanks for your answer!
    best regards,
    Hannes

    No,
    You should not use same program ID for different RFC adapters. It is recommended by SAP (check FAQ's on RFC).
    Although technically you can use but it gives you unpredictable behaviour based on connection pool.
    Regards,
    Satish

  • How to download the same song(track) with different keys? iTunes seems to think I have already downloaded the song and will not download the song in a different key of the Demo Track

    How to download the same song(track) with different keys? iTunes seems to think I have already dowloaded the song and will not let me download the song in a different key or the Demo.

    Hello Jigz19,
    It sounds like you are unable to play a couple of songs from your library becuase you get a message that the computer is unauthorized to play, but other content purchased that same day works without issue. I would verify that the affected songs were purchased with the same Apple ID first:
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Open iTunes
    Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
    Choose File > Get Info.
    Click the Summary tab.
    The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
    If so, then delete the songs:
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Then re download them with this article:
    Download past purchases
    http://support.apple.com/kb/ht2519
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Will a sequence return same value for two different sessions?

    Is there a possibility that a sequence will return same value to two different sessions when it is referred exactly at the same instance of time?

    @Justin... Thanks for your insight; indeed, we too feel this shouldn't ever happen and never heard of it either, but there it is. (No, we haven't logged a TAR yet -- whatever that is -- partly because it didn't occur to us and partly because we only recently came across the issue and sensibly want to do some testing before we cry foul.)
    However, the code is pretty straight-forward, much like this (inside a FOR EACH ROW trigger body):
    SELECT <seqname>.NEXTVAL INTO <keyvar> FROM DUAL;
    INSERT INTO <tblname> (<keyfield>, <... some other fields>)
    VALUES(<keyvar>, <... some other values> );
    (where <tblname> is NOT the table on which the trigger is fired). This is the only place where the sequence is ever accessed. The sequence state is way below its limits (either MAXVALUE or <keyfield>/<keyvar> datatype size).
    In this setup, end users sometimes got an out-of-the-blue SQL error to the effect that uniqueness constraint has been violated -- as I said, we used to have a unique index on <keyfield> -- which leads us to assume that the sequence generated a duplicate key (only way for the constraint to be violated, AFAIK). We released the constraint and indeed, using a simple SELECT <keyfield>, COUNT(*) FROM <tblname> GROUP BY <keyfield> HAVING COUNT(*)>1 got us some results.
    Unfortunately, the <tblname> table gets regularly purged by a consumer process so it's hard to trace; now we created a logger trigger, on <tblname> this time, which tracks cases of duplicate <keyfield> inserts... We'll see how it goes.
    @Laurent... winks at the CYCLE thing Our sequence is (needless to say) declared as NOCYCLE and the datatype is large enough to hold MAXVALUE.

Maybe you are looking for