Samrtform : how to inlarge width of line

i have letter that the header is the person detail .
the header divide to 2 part "from" and "to" , that Surrounded by Rectangle
in the bottom line of this header I write the mail address ,
The problem is that the address not show , I just see :
FROM                                             TO
                                                      account      ok
                                                      phone         ok
                                                      fax              ok
                                                      MAIL :       not ok
thanks

ok , now i am smarter
i found that the problem is due to char '-' , if my e mail address conatin the char '-'
for example : lalala-tetetete...... ,
i will see just the lalala
if i change or delete the char '-' to '_' or without any space i have no problem .
what can i do ?
thanks .

Similar Messages

How change the width of line programmetically

Hi all!
I have a problem. Please guide me how it can be handled? The Problem is:-
I want to change the width of a line programmatically when I press the button.
Waiting for an urgent response.
Thanks
BASIT ALI KHAN

What kind of line?
You can create a line with a text_field that has a small height (1) and then use the set_item_property to change its width.

How can I use more lines to show a field of a row in a report?

How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
Thanks for any help.

I was wondering if an answer was found for this one.
I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

How to delete the logical lines in JTextArea

Hi all,
Now that I know how to find the logical line count in JTextArea as
I found the following in the forum.
public static int getLineCount (JTextArea _textArea)
boolean lineWrapHolder = _textArea.getLineWrap();
_textArea.setLineWrap(false);
double height = _textArea.getPreferredSize().getHeight();
_textArea.setLineWrap(lineWrapHolder);
double rowSize = height/_textArea.getLineCount();
return (int) (_textArea.getPreferredSize().getHeight() / rowSize);
I want to delete the 4th line to the last line and append ... at the 4th, if the getLineCount exceeds 3. Does any body know how to do so?
The intention is for the multiline tooltip as I just want to show
the first three logical line and ... if the string is too long.
Thanks
Pin

The code looks good to me. The only thought I have is that the y coordinate for the rowThree point is wrong and is referencing row four.
I've been playing around with using a JTextArea as a renderer for a JTable. I have it working so that "..." appear when the text exceeds 2 rows. Try clicking on "B" in the letter column and then the update cell button a few times to add text. My code is slightly different than yours.
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
public class TestTable extends JFrame
     private final static String LETTERS = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
     JTable table;
     Vector row;
     public TestTable()
          Object[][] data = { {"1", "A"}, {"2", "B"}, {"3", "C"} };
          String[] columnNames = {"Number","Letter"};
          DefaultTableModel model = new DefaultTableModel(data, columnNames);
          table = new JTable(model)
               public String getToolTipText( MouseEvent e )
                    int row = rowAtPoint( e.getPoint() );
                    int column = columnAtPoint( e.getPoint() );
                    if (row == 0)
                         return null;
                    else
                         return row + " : " + column;
          table.setRowSelectionInterval(0, 0);
          table.setColumnSelectionInterval(0, 0);
          table.setRowHeight(0,34);
          table.setRowHeight(1,34);
          table.setRowHeight(2,34);
          table.setDefaultRenderer(Object.class, new TextAreaRenderer(2));
          JScrollPane scrollPane = new JScrollPane( table );
          getContentPane().add( scrollPane );
          JPanel buttonPanel = new JPanel();
          getContentPane().add( buttonPanel, BorderLayout.SOUTH );
          JButton button2 = new JButton( "Update Cell" );
          buttonPanel.add( button2 );
          button2.addActionListener( new ActionListener()
               public void actionPerformed(ActionEvent e)
                    int row = table.getSelectedRow();
                    int column = table.getSelectedColumn();
                    String value = (String)table.getValueAt(row, column);
                    value += value;
                    table.setValueAt( value, row, column );
                    DefaultTableModel model = (DefaultTableModel)table.getModel();
                    model.fireTableCellUpdated(row, column);
                    table.requestFocus();
     public static void main(String[] args)
          TestTable frame = new TestTable();
          frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
          frame.pack();
          frame.setVisible(true);
     private class TextAreaRenderer extends JTextArea implements TableCellRenderer
          public TextAreaRenderer(int displayRows)
               setRows(displayRows);
               setLineWrap( true );
          public Component getTableCellRendererComponent(JTable table,
                                         Object value,
                                         boolean isSelected,
                                         boolean hasFocus,
                                         int row,
                                         int column)
               setText( value.toString() );
               Dimension d = getPreferredSize();
               int maximumHeight = getRows() * getRowHeight();
               if (d.height > maximumHeight)
                    setSize(d);
                    int offset = viewToModel( new Point(d.width, maximumHeight - 1) );
                    replaceRange( "...", offset-3, getDocument().getLength() );
               return this;
}

How to skip first 5 lines from a txt file when using sql*loader

Hi,
I have a txt file that contains header info tat i dont need. how can i skip those line when importing the file to my database?
Cheers

Danny Fasen wrote:
I think most of us would process this report using pl/sql:
- read the file until you've read the column headers
- read the account info and insert the data in the table until you have read the last account info line
- read the file until you've read a new set of column headers (page 2)
- read the account info and insert the data in the table until you have read the last account info line (page 2)
- etc. until you reach the total block idenfitied by Count On-line ...
- read the totals and compare them with the data inserted in the tableOr maybe like this...
First create an external table to read the report as whole lines...
SQL> ed
Wrote file afiedt.buf
1 CREATE TABLE ext_report (
2    line VARCHAR2(200)
3          )
4 ORGANIZATION EXTERNAL (
5    TYPE oracle_loader
6    DEFAULT DIRECTORY TEST_DIR
7    ACCESS PARAMETERS (
8      RECORDS DELIMITED BY NEWLINE
9      BADFILE 'bad_report.bad'
10      DISCARDFILE 'dis_report.dis'
11      LOGFILE 'log_report.log'
12      FIELDS TERMINATED BY X'0D' RTRIM
13      MISSING FIELD VALUES ARE NULL
14      REJECT ROWS WITH ALL NULL FIELDS
15        (
16         line
17        )
18      )
19      LOCATION ('report.txt')
20    )
21 PARALLEL
22* REJECT LIMIT UNLIMITED
SQL> /
Table created.
SQL> select * from ext_report;
LINE
x report page1
CDC:00220 / Sat Aug-08-2009 xxxxp for 02/08/09 - 08/08/09 Effective Date 11/08/09 Wed Sep-30-2009 08:25:43
Bill to
Retailer Retailer Name                  Name on Bank Account           Bank ABA   Bank Acct            On-line Amount Instant Amount Total Amount
======== ============================== ============================== ========== ==================== =============== =============== ===============
0100103 BANK Terminal                  raji                           123456789 123456789            -29,999.98    9 0.00         99 -29,999.98
0100105 Independent 1                  Savings                        123456789 100000002            -1,905.00     9 0.00         99 -1,905.00
0100106 Independent 2                  system                         123456789 100000003            -800.00       9 -15.00       99 -815.00
LARGE SPACE
weekly_eft_repo 1.0 Page: 2
CDC:00220 / Sat Aug-08-2009 Weekly EFT Sweep for 02/08/09 - 08/08/09 Effective Date 11/08/09 Wed Sep-30-2009 08:25:43
Bill to
Retailer Retailer Name Name on Bank Account Bank ABA Bank Acct On-line Amount Instant Amount Total Amount
======== ============================== ============================== ========== ==================== =============== =============== ===============
Count On-line Amount Instant Amount Total Amount
============== ====================== ====================== ======================
Debits 0 0.00 0.00 0.00
Credits 3 -32,704.98 -15.00 -32,719.98
Totals 3 -32,704.98 -15.00 -32,719.98
Total Tape Records / Blocks / Hash : 3 1 37037034
End of Report
23 rows selected.Then we can check we can just pull out the lines of data we're interested in from that...
SQL> ed
Wrote file afiedt.buf
1 create view vw_report as
2* select line from ext_report where regexp_like(line, '^[0-9]')
SQL> /
View created.
SQL> select * from vw_report;
LINE
0100103 BANK Terminal                  raji                           123456789 123456789            -29,999.98    9 0.00         99 -29,999.98
0100105 Independent 1                  Savings                        123456789 100000002            -1,905.00     9 0.00         99 -1,905.00
0100106 Independent 2                  system                         123456789 100000003            -800.00       9 -15.00       99 -815.00And then we adapt that view to extract the data from those lines as actual columns...
SQL> col retailer format a10
SQL> col retailer_name format a20
SQL> col name_on_bank_account format a20
SQL> col online_amount format 999,990.00
SQL> col instant_amount format 999,990.00
SQL> col total_amount format 999,990.00
SQL> ed
Wrote file afiedt.buf
1 create or replace view vw_report as
2 select regexp_substr(line, '[^ ]+', 1, 1) as retailer
3        ,trim(regexp_replace(regexp_substr(line, '[[:alpha:]][[:alnum:] ]*[[:alpha:]]', 1, 1), '(.*) +[^ ]+$', '\1')) as retailer_name
4        ,trim(regexp_replace(regexp_substr(line, '[[:alpha:]][[:alnum:] ]*[[:alpha:]]', 1, 1), '.* ([^ ]+)$', '\1')) as name_on_bank_account
5        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 1)) as bank_aba
6        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 2)) as bank_account
7        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 3),'999,999.00') as online_amount
8        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 5),'999,999.00') as instant_amount
9        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 7),'999,999.00') as total_amount
10* from (select line from ext_report where regexp_like(line, '^[0-9]'))
SQL> /
View created.
SQL> select * from vw_report;
RETAILER   RETAILER_NAME        NAME_ON_BANK_ACCOUNT   BANK_ABA BANK_ACCOUNT ONLINE_AMOUNT INSTANT_AMOUNT TOTAL_AMOUNT
0100103    BANK Terminal        raji                  123456789    123456789    -29,999.98           0.00   -29,999.98
0100105    Independent 1        Savings               123456789    100000002     -1,905.00           0.00    -1,905.00
0100106    Independent 2        system                123456789    100000003       -800.00         -15.00      -815.00
SQL>I couldn't quite figure out the "9" and the "99" data that was on those lines so I assume it should just be ignored. I also formatted the report data to fixed columns width in my external text file as I'd assume that's how the data would be generated, not that that would make much difference when extracting the values with regular expressions as I've done.
So... something like that anyway. ;)

How to make the diagonal line in the swing table cell?

Hi all,
How to make the diagonal line in the swing table cell just like the link below?
http://61.132.17.188/webber/table.gif

One improvement.. To get a line that is neat, use a bit of Graphics2D
    public void paintComponent(java.awt.Graphics g)
        int w = getSize().width;
        int h = getSize().height;
        // draw a line between (0,0) and (w,h)
        g.setColor(getForeground());
        if (strTop == null)
            strTop = " ";
        if (strBottom == null)
            strBottom = " ";
            java.awt.Graphics2D g2 = (java.awt.Graphics2D)g;
          g2.setRenderingHint(java.awt.RenderingHints.KEY_ANTIALIASING,java.awt.RenderingHints.VALUE_ANTIALIAS_ON);
          //g2.setStroke(new java.awt.BasicStroke(14.0f));
        g.drawLine(0, 0, w, h);
        //the following lines will draw the two strings,
        //one above the top of the line and the above below it.
        g2.drawString(strTop, (w/2)+2, (h/2)-2);
        g2.drawString(strBottom, 2, (h / 2) + 2);
        //the x,y for drawString are only based on assumption.   //do necessary changes to suit ur needs.
    }Then create a TableCellRenderer and set it to the Table Header for ur table's 1st row.....
Cheers

How to decrease width of the dropdown bookmark panel (FF 11)?

How to decrease width of the dropdown bookmark panel (FF 11)?
This panel is too wide and covers too much space in underlying windows. The book marks text should not be truncated but some way needs to be found to allow the entire text of any line to be viewed when the cursor lands on it. Much of the information in "HELP" related to this question turns out to be very very old (essentially meaningless in 2012).

My bookmarks truncate, but only after many, many characters. Then you can view the full title, as well as the URL, in the mouseover tooltip.
To narrow the width of the bookmark menus:
(1) There might be an existing add-on targeted to this; I didn't search.
(2) You could create a custom style rule. One way to do this is to use the Stylish extension and add the following userstyle (create a blank rule first):
<br>@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#bookmarksMenu menupopup {max-width:15em;}
That works in my test, but you can tweak that maximum width to suit your needs. (1 "em" is about 16 pixels). Stylish can be installed from here: [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish :: Add-ons for Firefox].
(3) You could create a custom style rule in the file userChrome.css, which you can add to your personal Firefox profile. I didn't test it.

How to delete string or line from unix file(dataset) of application server

Hi All,
After transfer workarea information or all records into dataset(unix file). When I see the file in application server automatically the last line is shown a blank line. I am not passing any blank line.
I have tried for single record than also the file generates the last line(2nd line) also a blank line.
When I m reading the dataset, it is not reading the last blank line but why it is showing the last blank line?
How to delete string or line from unix file(dataset) of application server?
Please give your comments to resolve this.
Thanks
Tirumula Rao Chinni

Hi Rio,
I faced similar kind of issue working with files on UNIX platform.
The line is a line feed to remove it use
DATA : lv_carr_linefd TYPE abap_cr_lf VALUE cl_abap_char_utilities=>cr_lf.
DATA : lv_carr_return TYPE char1,
         lv_line_feed   TYPE char1.
lv_line_feed   = lv_carr_linefd(1).
lv_carr_return = lv_carr_linefd+1(1).
Note: IMP: The character in ' ' is not space but is a special
character set by pressing ALT and +255 simultaneosly
REPLACE ALL OCCURRENCES OF lv_line_feed IN l_string WITH ' '.
REPLACE ALL OCCURRENCES OF lv_carr_return IN l_string WITH ' '.

How to give no of lines per page in alv report

hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.

Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            it_events                = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*&      Form after_line_output
*       Form for the After Line Output Event in the internal table
*      --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno.          "Defaulted value for line count
    perform write_footer.
    NEW-PAGE.
ENDIF.
ENDFORM.                    " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil.

How 2 read all the line of a sales order text ID plz

Dear all
I have the following to read sales order text of single line of limited char(40)
TIDNO = '0003'.
    CONCATENATE SSORD
                LIPS-POSNR
    INTO        TNAME.
    TOBJT = 'VBBP'.
    PERFORM FINDTEXT.
    LOOP AT MSLINES.
      WA_ITEM-PACKTYP = mslines-tdline(40).
      EXIT.
    ENDLOOP.
How do i read mutiple lines plz tell me ?
Thnx
Moni
Message was edited by: md monirujjaman

Hi Md,
sorry I don't understand your question, can you explain more ?
Regards
Frédéric

Want to know how to check for new line character in text file

Hi All,
I`m trying to read data from text file. However I`m not sure whether the data is in 1st line or nth line. Now I`m trying to read the text from the readline. But if text is "" and not NULL then my code fails. So I want to know how to check for new line character and go to next line to find the data. Please help.
Thanks
static int readandwriteFile(Logger logger,String filepath){
          BufferedWriter out = null;
          BufferedReader in = null;
          File fr = null;
          int get_count = 0;
          try     {
          if(new File(filepath).exists())
          fr= new File(filepath);
                    System.out.println("FileName: "+fr);
               if(fr != null){
in = new BufferedReader(new FileReader(fr));
                         String text = in.readLine();
                         if(text != null){
                         get_count = Integer.parseInt(text);
                         in.close();
                         else{
                              get_count = 0;
     else{
out = new BufferedWriter(new FileWriter(filepath));
     out.write("0");
            out.close();
               }          //Reading of the row count file ended.
          catch(Exception e) {
               e.printStackTrace();
          finally {
               try{               if (in != null) {
                         in.close();
          if (out != null) {
                         out.close();
          catch(Exception e) {
                    e.printStackTrace();
          return get_count;
     }

You are calling the readline() only once which means you are reading only the first line from the file...
Use a loop (Do-While preferably)
do{
//your code
}while(text == "")

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How do I get Connection Line to show up in Pages

How do I open Connection Line in Pages. It is grayed out in my menu. Thank you!

As Jerry says:
Click on (only) 2 floating objects at a time. It sounds like you have more than 2 selected, otherwise you would not even see thee the menu option.
Peter

How to delete the specified line in file?

How to delete the specified line in file? In case of deleting a specified line in a file, how to do?
Line 1
Line 2
Line 3
Line 4
Line 5
The case is a file including the above content. Now I wanna to delete the "Line 3" and how to realize the action in Java?

An alternative solution can be :
import java.io.LineNumberReader;
import java.io.IOException;
import java.io.File;
import java.io.FileReader;
import java.io.BufferedWriter;
import java.io.FileWriter;
import java.io.PrintWriter;
public class LineDeleter {
public static void main(String args[]){
try {
//suppose you want to delete line 3
     int lineToBeDeleted = 3;
     File f = new File("line.txt");
     long fileSize = f.length();
//Wrap the FileReader with a LineNumberReader. It will help you
//identify the lines.
LineNumberReader lnr = new LineNumberReader( new FileReader(f));
//Wrap the FileWriter object with BufferedWriter object. Create it with the buffersize
//equal to the file size.
     BufferedWriter bw = new BufferedWriter(new FileWriter(new File("line1.txt")),(int)fileSize);
//Wrap BufferedWriter object with PrintWriter so that it allows you
//to print line by line
PrintWriter pw = new PrintWriter(bw);
     String s=null;
     while ( (s=lnr.readLine())!=null ){
          System.out.println(s);
          int lineNumber = lnr.getLineNumber();
//match the line number
          if(! (lineNumber==lineToBeDeleted)){
               pw.println(s);
          pw.flush();
          lnr.close();
          pw.close();
     catch(Exception e){System.out.println(e);}
If you want you can rename the line1.txt to the original file name.
I hope this helps.Good luck!!!!!!

How can i remove a line from an ordinary text file?

It is easy to remove a line from a file by rewriting the file. how can i remove a line without rewriting ? Also, do not use whitespaces to overwrite the line. I expect a perfect line deletion code .....

gimbal2 wrote:
hsc71 wrote:
It's the way you communicate. Try to be carefull with the words you use in your post. It's easy to insult people just by choosing the wrong words. Bold text and capitals is equal to shouting.
shock. You said "wrong words". I am seriously offended by that!
Seriously, would you care that I am offended? I really hope not... Say what you want, people will find reasons to take offense one way or the other.Hehe, maybe you're right, but the OP still has no answer.............and in the end that's what he/she is looking for.

Samrtform : how to inlarge width of line

Similar Messages

Maybe you are looking for