SAP Connector 2 - Could not load file or assembly 'SAP

Hi all,
I've recently installed SAP .NET Connector 2 and have been developing a basic C# web form to interrogate the customers table. I have created all my code and done a successdul build. However, when I try to run the web form I get the following error:
<i>Could not load file or assembly 'SAP.Connector, Version=2.0.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23' or one of its dependencies. The system cannot find the file specified.</i>
The SAP.Connector.dll and SAP.Connector.Rfc.dll files are on both my development machine and the server I am deploying the project on. Any ideas ?
Thanks.

Fixed it myself. In the solution browser, expand the reference section and in the properties for the SAP.Connector and SAP.Connector.Rfc set the 'Copy Local' parameter from False to True. This fixes the issue.

Similar Messages

BizTalk 2009 WCF-SAP Adapter Could not load file or assembly 'Microsoft.Adapters.SAP.SAPGInvoker...' one of its dependencies error

Hello,
I have a BizTalk Server 2009 running on Windows Server 2003 x64. I am installing WCF-SAP adapter and have done the following for the same. However, I am getting an error as mentioned below when I click on the Configure button of WCF-SAP adapter in send
port. I would appreciate if anyone could let me know how to fix this error and make the WCF-SAP adapter working.
TITLE: BizTalk Server 2009 Administration Console
Exception has been thrown by the target of an invocation. (mscorlib)
ADDITIONAL INFORMATION:
Exception has been thrown by the target of an invocation. (mscorlib)
Could not load file or assembly 'Microsoft.Adapters.SAP.SAPGInvoker, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. This application has failed to start because the application configuration is incorrect. Reinstalling
the application may fix this problem. (Exception from HRESULT: 0x800736B1) (Microsoft.Adapters.SAP)
This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. (Exception from HRESULT: 0x800736B1)
I have copied the following 32 bit & 64 bit unicode DLLs in SysWOW64 and System32 folders respectively.
icudt30.dll
icuin30.dll
icuuc30.dll
librfc32u.dll
libsapu16vc71.dll
libsapucum.dll
Following r3dllinst DLLs are there in System32 folder.
mfc42.dll
mfc42u.dll
mfc71.dll
mfc71u.dll
msvcp60.dll
msvcp71.dll
msvcp80.dll
msvcr71.dll
msvcr80.dll
Following r3dllinst DLLs are there in SysWOW64 folder.
mfc40.dll
mfc40u.dll
mfc42.dll
mfc42u.dll
mfc71.dll
mfc71u.dll
mfc80.dll
mfc80u.dll
msvcp50.dll
msvcp60.dll
msvcp71.dll
msvcp80.dll
msvcr71.dll
msvcr80.dll
I have the following softwares installed on the server.
Microsoft Visual C++ 2008 Redistributable x64
Microsoft Visual C++ 2008 Redistributable x86
WCF LOB Adapter SDK (64-bit)
BizTalk Adapter Pack 2.0 (64-bit)
BizTalk Adapter Pack 2.0 (32-bit)
The following bindings are also present in the machine.config under Framework\v2.0.50727\CONFIG and Framework64\v2.0.50727\CONFIG
<system.serviceModel>
<extensions>
<bindingElementExtensions>
<add name="sapAdapter" type="Microsoft.Adapters.SAP.SAPAdapterExtensionElement, Microsoft.Adapters.SAP, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</bindingElementExtensions>
</extensions>
<client>
<endpoint binding="sapBinding" contract="IMetadataExchange" name="sap" />
</client>
</system.serviceModel>
Thanks,
Tarun

Have you tried this?
http://geekswithblogs.net/MoonWalker/archive/2013/07/17/could-not-load-file-or-assembly-microsoft.adapters.sap.sapginvoker.dll.aspx
Morten la Cour

Could not load file or assembly 'file:///C:\Program Files\SAP.......

Could not load file or assembly 'file:///C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. The system cannot find the file specified.
This is the error that always comes out when i run my program. I've already checked My SAP folder in my C drive. However, there is no win32_x86 directory inside the folder of SAP BusinessObjects Enterprise XI 4.0 in my SAP business objects enterprise folder. What is it that I need to do now.
I am hoping for your answer since i badly need the crystal reports for my thesis. Thank You.

Hi thanks for your reply. I've already searched. And then i found this answer.
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
By pasting that to the config file. Problem is, i don't know where is the config file and which file they are talking about. Can you please tell me where i could find the config file? Please. Thank you very much.

Could not load file or assembly 'sapnco'

Hey Guys,
When i use to Sap connector in C# then every thing is running.But when i try to Sap connector in ASP .NET then I'm getting this error.
How can i do ?
Error is this : Could not load file or assembly 'sapnco'
Thank you
Regards,
B.Y.

Copy current version of the files sapnco.dll and sapnco_utils.dll to your /bin/Debug and Release directory.

Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral

Hi,
I have a web site developed with vs 2010 (32-bit) and crystal report 13 (for sv 2010). It's working well i when crystal report installed in gac. I need to this app on a server WITHOUT crystal report installed. so I copied all required crystal assemblies into the bin folder and publish it. I always get following error message
Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
I tried a lot of solutions in this forum, but none of them resolved my issue.
Please help!!
thanks,
Max

Stick with x86 or x64, not Any CPU.
Don't include log4net manually
Look at these Kbases:
[1543854 - Error: Could not load file or assembly log4net|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343333333833353334%7D.do]
[1550854 - "Could not load file or assembly 'log4net' or one of its dependencies" Error when building Visual Studio 2010 solution utilizing the Crystal Reports .NET Runtime|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353330333833353334%7D.do]
[1544693 - Error BC30560: 'CrystalReportViewer' is ambiguous in the namespace 'CrystalDecisions.Web'|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343334333633393333%7D.do]
[1548993 - Server Error in '/' Application when running .NET Web Application using Crystal Reports for Visual Studio 2010|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343338333933393333%7D.do]
- Ludek

Could not load file or assembly 'Interop.SBODI_Server' Web Service Error

Hello Professionals,
I'm trying to build a .net application to create a PO through SAP B1 Web Service,
I have downloaded the SAP B1 Web Service Tool and generated all WSDL Files,
I followed the manual to host web services on IIS. However, when i try to connect to web service i get this error
Could not load file or assembly 'Interop.SBODI_Server' or one of its dependencies. An attempt was made to load a program with an incorrect format."
how can i resolve this issue?
Thanks in advance,

Just to make sure : Your B1WS is installed on the same machine like SBO DI Server ?
Can you create a simple forms application, include SBODI_Server reference and make a direct DIS SOAP call. Like
<?xml version="1.0" encoding="UTF-16"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Body>
    <dis:Login xmlns:dis="http://www.sap.com/SBO/DIS">
      <DatabaseServer>confDatabaseServer</DatabaseServer>
      <DatabaseName>confLagerDatabaseName</DatabaseName>
      <DatabaseType>dst_MSSQL2012</DatabaseType>
      <DatabaseUsername>confDBUser</DatabaseUsername>
      <DatabasePassword>confDBPassword</DatabasePassword>
      <CompanyUsername>confCompanyUser</CompanyUsername>
      <CompanyPassword>confCompanyPassword</CompanyPassword>
      <Language>ln_English</Language>
      <LicenseServer>confLicenceServer</LicenseServer>
    </dis:Login>
</env:Body>
</env:Envelope>
SBODI_Server.Node myNode = new SBODI_Server.Node();
var result = myNode.Interact(xmlCommand);

BO XI Release 2: Could not load file or assembly 'BusinessObjects.

I am getting the following error whenever I click on Home->Public Folders in BO info view. Is it some version conflict?
I am using BO XI Release 2. Please help.
" An error has occurred: Could not load file or assembly 'BusinessObjects.Enterprise.LanguageTools, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified. "

Hi,
[http://service.sap.com/installations]
Navigate to Installations and Upgrades - Entry by Application Group -> SAP BusinessObjects packages and products-> SBOP ENTERPRISE-> BOBJ ENTERPRISE XI R2
Regards,
Stratos

Could not load file or assembly 'BusinessObjects.Enterprise.Sdk' with 64 bit SDK

I am running across an error that I do not fully understand when trying to get the SDK to work for 4.1 SP04. I have been trying to get this solution for a while now. I am able to run the SDK functionality with the 32 bit version without an issues however, my client would like to run the 64 bit version to align with their architecture. I have added the x64 DLLs to my project in VS2013, and compiled and built the project as a 64 bit project. I am receiving the following error message:
Could not load file or assembly 'BusinessObjects.Enterprise.Sdk' or one of its dependencies. An attempt was made to load a program with an incorrect format.
When building the project to build on "Any CPU" instead of x64 or x86, I am seeing the following messages:
Warning    1    There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "BusinessObjects.Enterprise.Sdk, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=AMD64", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project.    DemoWeb2
Warning    2    There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "CrystalDecisions.Enterprise.Framework, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=x86", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project.    DemoWeb2
Warning    3    There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "CrystalDecisions.Enterprise.InfoStore, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=x86", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project.    DemoWeb2
Warning    4    There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "CrystalDecisions.Enterprise.PluginManager, Version=14.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304, processorArchitecture=x86", "AMD64". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take a dependency on references with a processor architecture that matches the targeted processor architecture of your project.    DemoWeb2
I have made sure that I am referencing the 64 bit sdk .dlls from C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\. I only have 64 bit installed as well. Are InfoStore, Framework, and PluginManager only x86?
Thanks!

Hi Dustin
You do not need to be concerned if your app references 32 or 64 bit assemblies. VS being 32 bit, needs to reference 32 bit assemblies in order to compile correctly. Thus running the app from the VS IDE, you wil be using 32 bit assemblies. Using a compiled exe or a DLL, the app will use 32 bit or 64 bit assemblies depending on how the app was compiled and "bitness" of the OS.
E.g;; an app compiled as 32 bit will require 32 bit assemblies
An app compiled as 64 bit will run 64 bit assemblies - on 64 bit OS only.
An app compiled as "Any CPU", will run 32 b it or 64 bit assemblies, depending on the OS. On a 64 bit OS, the app will by definition use 64 bit assemblies (but it is up to you to deploy the 64 bit runtime - not the 32 bit runtime). On a 32 bit OS the app will use 32 bit assemblies.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Could not load file or assembly 'CrystalDecissions.CrystalReports.Engine, '

Dear Experts,
I am running crystal report viewer in SAP B1 2007A but one of my client machine will get the following error messages
when I try to run the CR application:
Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
The client is not using any MS VS & CR in her machine. I also not so sure what is the main cause of this problem as I not so familiar with CR in SAP B1.
Kindly help me to resolve the error. thx.
Regards,
xavier

Hi xavier.rayne,
Check following link.
http://forums.asp.net/t/1388703.aspx/1?CouldnotloadfileorassemblyquotCrystalDecisionCrystalReports+
http://social.msdn.microsoft.com/Forums/en/vscrystalreports/thread/c9df7a18-513e-4c26-8b65-9578d3bddef0
SAP Crystal Solutions Support
I hope this will help you
Thanks,
Srujal Patel

Could not load file or assembly 'CrystalDecisions.ReportAppServer.ClientDoc, Version=13.0.2000.0,

Hi
I get the below error message when I deploy the application on Windows server 2008 R2 (64Bit)
Could not load file or assembly 'CrystalDecisions.ReportAppServer.ClientDoc, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 148:        <add assembly="CrystalDecisions.Shared, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
Line 149:         <add assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
Line 150: <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/> Line 151: Line 152:
Here are the steps followed
Installed the develper edition of crystal report 13 on development machine which is XP(32 bit)
Application works fine on development machine and target platform for the application is "Any CPU"
On Deployement Machine [Windows server 2008 R2 (64Bit)] insatlled the (v. 13.0.2.x) 64 bit MSI from http://scn.sap.com/docs/DOC-7824
I reffered many post for the issue but no help. Please help me to fix this issue.
-Manish

You're on a 64 bit box, running a 32 bit web app. Make sure the app pool is set to 32 bit. Also see the following:
http://adilmca.wordpress.com/2013/04/08/visual-studio-2012-crystal-report-not-working-on-windows-server-2012-0x800a1391-javascript-runtime-error-bobj-is-undefined/
http://scn.sap.com/community/crystal-reports-for-visual-studio/blog/2012/10/16/report-appears-blank-in-browser-after-deploying-a-crystal-reportsnet-web-application
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Could not load file or assembly 'Interop.SAPbobsCOM, Version=8.8.0.0

Hi,
We recently upgraded our SAP B1 to 8.8, our add-on still remains 2007A and so far it works fine. But when i tried to replace the assembly(UI & DI) in my project from 2007A to 8.8 and run it, then I got this error. During my replacing the assembly SAPbobsCOM and SAPbouiCOM in visual studio 2008, I didn't notice any problem. Below are what I did for the upgrading:
1. I launched my SAP and connect to our new SAP B1 server and was asked to do the upgrading.
2. Once my SAP B1 client upgrade finished then I can login into new version of SAP B1 8.8
3. Then I open my Add-On project and remove the assembly (old ver 2007, UI & DI) then re-add the reference using 8.8
When I run the add-on in debugging mode with my current SAP B1 8.8 client, then I got an errors saying "Could not load file or assembly 'Interop.SAPbobsCOM, Version=8.8.0.0"
Any idea?
Many thanks!
Lan

Hi Gordon,
I am not running the new add-on inside SAP B1, I am running it inside visual studio under debugging mode. Do you think i still need to clean the temp folder? Can you tell me which temp folder or what specific file need to be removed?
Thanks,
Lan

Could not load file or assembly 'CrystalDecisions.Shared, Version=12.0.2000

I downloaded the trial version of CR 2008 in order to test an update of a report from Crystal 10. I would also add that I am using CR 2008 embedded in Visual Studio .Net 2005. I was able to successfully upgrade the report and run it without issue from the .Net debugger. However when I deploy the report to the users machine when it attempts to display the report I get the following error:
Could not load file or assembly 'CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKey Token=692fbea5521e1304' or one of its dependencies. The system cannot fined the file specified.
Since I was able to successfully deploy the report with CR 10, my question is do I need to purchase a version of CR 2008 in order to deploy? I just want to make sure that this is indeed the issue prior to making the purchase. If that is not the case can you please point me to proper deployment procedures for 2008, perhaps there is something I am missing.
Thanks much for your assistance,
Mike

I will assume that when you are viewing the report you are using a custom app which uses CR 2008. To deploy your app you will need two things:
1. The Runtimes
2. A valid Keycode
You can obtain the Runtimes here:
Runtime Downloads
CR 2008 msi: https://smpdl.sap-ag.de/~sapidp/012002523100005985862008E/cr120_redist_install.zip
CR 2008 click once: https://smpdl.sap-ag.de/~sapidp/012002523100005986302008E/cr120_clickonce.zip
CR 2008 msm: https://smpdl.sap-ag.de/~sapidp/012002523100005985842008E/cr120_mm.zip
You can also find these by going to here:
https://www.sdn.sap.com/irj/sdn/businessobjects-downloads
and selecting "Crystal Reports", ".NET", and "Utility"
I'm not sure if your eval keycode will work to deploy - but even if it does, the application will eventually stop working when the eval period runs out. If you want it to keep working, you will need to purchase a permanent keycode.
Shawn

Could not load file or assembly 'CrystalDecisions.Web,?

Hi to all,
I created a webapplication using crystal report11.5, Asp.net2.0-C#.
The same web application older version developed with crystal
report10, that older version is installed in other machine it has
CR 10.0 version only , the client dont like to install one more
setup for CR11.5, so what i did is i build the lattest version
application and copy the dll into the older version bin folder
and pasted the
CrystalReports11_5_NET_2005.msm, CrystalReports11_5_NET.msm to c:\program files\common
files\merge modules now i run that older version application
now it raise an error like
Could not load file or assembly 'CrystalDecisions.Web,
Version=11.5.3700.0, Culture=neutral,
PublicKeyToken=692fbea5521e1304' or one of its
dependencies. The system cannot find the file specified.
May i know why it happens, i added the lattest version web application dll and msm then why it raise this error and experts help me how to resolve it. This is my urgent work please help

Hi;
I'm not sure how you deployed, but from the sounds of things you simply copied the .MSM files to the client computer - is that correct?
What you need to do is create a runtime package on your development computer, adding the .MSM to that package.
Or you can install the NET Server install .MSI file on the client ([download|https://smpdl.sap-ag.de/~sapidp/012002523100009657852008E/crxir2sp4_net_si.zip])
This is discussed in the forums, such as here:
https://forums.sdn.sap.com/click.jspa?searchID=17323912&messageID=6041034
Regards,
Jonathan

Could not load file or assembly 'FlashControlV71'

I am getting the following error when trying to view a report in my application using the CrystalDecisions.Windows.Forms.CrystalReportViewer control
Error -
Could not load file or assembly 'FlashControlV71', Version=1.0.3187.32366, Culture=neutral, PublicKey Token=692fbea5521e1304' of one of its dependences. The system cannot find the file specified.
Do you know what I might be missing here?

CR 2008 SP 2 does have a dependency on FlashControlV71.dll. It should be in the GAC. So, this brings up four questions;
1) What CR Service Pack are you on?
2) Are you seeing this behavior on your development computer, or after you deploy the app?
3) If on a deployed computer, are you using the runtime from here;
msm:
https://smpdl.sap-ag.de/~sapidp/012002523100009159092009E/cr2008sp2_mm.zip
msi:
https://smpdl.sap-ag.de/~sapidp/012002523100009159002009E/cr2008sp2_redistinstall.zip
4) What version of .NET are you using?
Ludek
Edited by: Ludek Uher on Oct 14, 2009 8:50 AM

Could not load file or assembly 'log4net' or one of its dependencies. An at

Hi guys,
Yesterday I downloaded the CR release for VS2010. Before this I was using the Beta (and later Beta2) version. Both worked fine. I first uninstalled the beta version, next I installed the release version. No problems with installing. But now I'm trying to use CR. I get the error:
"Could not load file or assembly 'log4net' or one of its dependencies. An attempt was made to load a program with an incorrect format.".
I noticed that it has something to do with the runtime enviroment. If I set the project's platform target to x86, it works fine. Turning it back to 'any CPU' or x64, it results in that error. (I'm using w7 x64).
I did install the the x64 runtime (CRRuntime_64bit_13_0.msi, also asked at the end of the installation).
Any ideas how to solve this?
Why is CR using log4net anyway?
Best,
Danny

Hi Ludek,
Thanks for you replies. Let's answer them:
-Is this a local install, or are you using some sort of a remote connection?
It's my local development machine.
-Are you getting the error at build time or at runtime?
Both: VS2010 doesn't give a compiler error, but only a warning. At runtime in completly crashes.
- Look in the GAC. Do you see Log4Net.dll? There should be two - one for 32 bit and one for 64 bit OS (same version though).
Both are there.
Further I noticed the following.
- If I set the target platform to Any CPU (and thus x64), when building, log4net.dll is copied to the bin folder. If the target platform is set to x32, log4net.dll is not copied. If a take a look at the last modified time of the dll and compare this to the dll in the GAC, the 64-bit dll is copied. So this looks right.
- If I selected the included reference in VS2010, it says that the path of the reference is the following: ...\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.ReportSource.dll. So it looks like the 32-bit version of CR is used. When I go the folder Crystal Reports for ...\.NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86, I can find here a folder "dotnet", containing all the references included in the project. Taking a look into the "win64_x64" folder, I can't find the "dotnet" folder. I did install the 64-bit runtime version.
Hope this information helps

SAP Connector 2 - Could not load file or assembly 'SAP

Similar Messages

Maybe you are looking for