SAP Dashboard Design Startup Error "Could not load file..."

I am using SAP Dashboard Design Departmental Edition 2011 (currently trial version).
I have created an interactive dashboard with several selectors, graphs, and image components.
I went to open it yesterday, and an error popped up that read "Could not load file. This file may be corrupt or contain features not compatible in this verson of dashboard design."
I went to open it again this morning, and the same error showed up.
I am able to open older versions of this project (for example, a version saved on a previous date), but I receive this error message when I attempt to open the most up to date file.
Any ideas on why this is happening?
-Tyler
Edited by: TylerB on Jul 18, 2011 6:10 PM

Hi Tyler,
What environment are you running on?
-OS Version
-Office Version
-Flash Player version
It is likely that an issue occured during the last save instance of the XLF, therby corrupting the file. What you can try to do is install the "debug" version of the Flash Player. This will hopefully reveal more detailed error messages upon opening the XLF file (eg. actionscript/flex errors).
Flash Debug Player download: http://download.macromedia.com/pub/flashplayer/updaters/10/flashplayer_10_ax_debug.exe
Give this a try and let me know if any additional information pops up.
Regards,
Jon Teopaco

Similar Messages

Error: Could not load file or assembly 'Microsoft.Activities, Version=1.0.0.0

Hi,
I am using VS 2012 to create custom sequential workflows (2010 model). The workflows created in VS 2010 are working fine, but the workflow created in VS 2012 is throwing the error.
When the workflow is run, I am getting the below error:
Error:
Could not load file or assembly 'Microsoft.Activities, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Stack Trace: at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean
forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean
throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.Assembly.Load(AssemblyName assemblyRef) at System.Workflow.Activities.Rules.SimpleRunTimeTypeProvider.get_ReferencedAssemblies() at System.Workflow.Activities.Rules.RuleValidation.DetermineExtensionMethods()
at System.Workflow.Activities.Rules.RuleValidation.get_ExtensionMethods() at System.Workflow.Activities.Rules.RuleValidation.GetNamedMethods(List`1 targetTypes, String methodName, BindingFlags methodBindingFlags) at System.Workflow.Activities.Rules.RuleValidation.ResolveMethod(Type
targetType, String methodName, BindingFlags methodBindingFlags, List`1 argumentExprs, ValidationError& error) at System.Workflow.Activities.Rules.MethodInvokeExpression.Validate(CodeExpression expression, RuleValidation validation, Boolean isWritten) at
System.Workflow.Activities.Rules.RuleExpressionWalker.Validate(RuleValidation validation, CodeExpression expression, Boolean isWritten) at System.Workflow.Activities.Rules.RuleValidation.ValidateConditionExpression(CodeExpression expression) at System.Workflow.Activities.Rules.RuleExpressionCondition.Validate(RuleValidation
validation) at System.Workflow.Activities.Rules.RuleConditionReference.Evaluate(Activity activity, IServiceProvider provider) at System.Workflow.Activities.IfElseActivity.Execute(ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T
activity, ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.FaultAndCancellationHandlingFilter.Execute(Activity activity, ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime
workflowCoreRuntime) at System.Workflow.Runtime.Scheduler.Run()
How to fix this?
Thanks

Hi,
The machine in which the workflow was created is different from the machine it is deployed.
Which dll should be available? Is the dll not part of SharePoint 2013?
Is this part of workflow Manager?
Thanks

Deploy Web Site Error:Could not load file or assembly 'System.Data.SqlServerCe, Version=4.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies

I have created a ASP.NET web Site (not Web application), using Visual Studio 2012 Ultimate and "SQL Server Compact 4.0 Local Database" in my C# Code.
I am able to successfully compile & publish the website to another IIS Web Server, with Operating System Windows Server 2008 R2 Standard. I can even test, successfully, this website on the machine I developed it in.
I am publishing the website, from within Visual Studio, to a Network web server running IIS. To Publish I am using Build-> "Publish Web Site". In the Publish Profile, I am using Web Deploy Method. Even though I am using, successfully,
"SQL Server Compact 4.0 Local Database" in my website, the "settings" (in Publish Profile) does not detect any Databases in the project. Which may not be a problem.
When I try to bring up the web site on the IIS Web Server machine I get the following error..
Could not load file or assembly 'System.Data.SqlServerCe, Version=4.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies .
As my project is a Web Site, not Web Site Application, I do not have a references node in the Solution Explorer. I think the System.Data.SqlServerCe.dll, which is type GAC in my project, is not getting published to the webserver, which is causing this Error.
Can I copy this .dll over manually ? If yes, where to put on the ISS Web Server ? I do not see any bin folder.
Any help to resolve this error will be appreciated.
diana4

Hello.. I went ahead and created web application project and have gone past that error. But I have a new error now
System.Data.SqlServerCe.SqlCeException: Unable to load the native components of
SQL Server Compact corresponding to the ADO.NET provider of version 8876.
Install the correct version of SQL Server Compact. Refer to KB article 974247
for more details.
Compiling and Publishing (Deployment) are both successful
In my project, when adding reference to SQL Server Compact Edition , there are 2 possible locations to reference the DDL from:
C:\Program Files\Microsoft SQL Server Compact Edition\v4.0\Private
C:\Program Files\Microsoft SQL Server Compact Edition\v4.0\Desktop.
I have tried both. I get the same error as shown above.
Interestingly, in My WebConfig, I do not see any reference to System.Data.SqlServerCe.
Yet, the Website works when I click on Ctrl+F5
diana4

Log error "Could not load file or assembly 'BarcodeConversion' or one of its dependencies. Access is denied. This code work fine in server 2008 but get this error in server 2012

This code work fine in server 2008, but get this error in server 2012. Do yo have any idea?

Need some more info as to where this is installed and how.
First thing to try would be to uninstall the solution and reinstall.
Check the GAC for your assembly as well as web.config.
If you don't see it in one of those places, something went wrong with the install and you'll need to start over.
Brandon James SharePoint Developer/Administrator

Error could not load file or assembly netpont.licencing error'

Hi,
iam new to netpoint SDK, i have created table and i have two fields like accounid,accountame i try insert through netpoint.api.dll
pls herewith below i have attached follwing code. Please guide me
how to insert a sample data in sample database.
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using netpoint.classes;
using netpoint.api;
using netpoint.api.account;
using netpoint.api.common;
using netpoint.api.prospecting;
public partial class _Default : netpoint.classes.NPBasePage
    protected void Page_Load(object sender, EventArgs e)
    protected void Button1_Click(object sender, EventArgs e)
        System.Data.Odbc.OdbcConnection cn;
        System.Data.Odbc.OdbcCommand com;
        string strsql;
        NPBasePage bp = (NPBasePage)Page;
        cn = new System.Data.Odbc.OdbcConnection("Driver={SQL Server};Server=btsserverdc02;Database=library;Uid=sa;Pwd=sa2000");
        strsql = "insert into Users values('" + txtsample1.Text + "','" + txtsample2.Text + "' )";
         cn.Open();
        com = new System.Data.Odbc.OdbcCommand(strsql, cn);
        com.ExecuteNonQuery();
        cn.Close();

Here's a sample page to display the logged in users' email address:
<%@ Import Namespace="netpoint.classes" %>
<%@ Import Namespace="netpoint.api" %>
<%@ Import Namespace="netpoint.api.account" %>
<%@ Page language="c#" MasterPageFile="~/masters/common.master" Inherits="netpoint.classes.NPBasePage" %>
< script runat="server"> //REMOVE SPACE BETWEEN < AND SCRIPT
private NPBasePage bp;
private NPUser u;
public void Page_Load(object sender, System.EventArgs e){
if (!base.IsPostBack)
     this.bp = (NPBasePage) this.Page;
        this.u = new NPUser(this.bp.UserID);
     if (this.bp.UserID != "")
        user.Text = u.Email;
     else
     user.Text = "Not logged in";
</script>
<asp:Content ContentPlaceHolderID="mainslot" runat="server" ID="main">
User Email: <asp:Label ID="user" runat="server" Text="Label" Width="97px"></asp:Label> </div>
</asp:Content>

Could not load file or assembly 'Interop.SBODI_Server' Web Service Error

Hello Professionals,
I'm trying to build a .net application to create a PO through SAP B1 Web Service,
I have downloaded the SAP B1 Web Service Tool and generated all WSDL Files,
I followed the manual to host web services on IIS. However, when i try to connect to web service i get this error
Could not load file or assembly 'Interop.SBODI_Server' or one of its dependencies. An attempt was made to load a program with an incorrect format."
how can i resolve this issue?
Thanks in advance,

Just to make sure : Your B1WS is installed on the same machine like SBO DI Server ?
Can you create a simple forms application, include SBODI_Server reference and make a direct DIS SOAP call. Like
<?xml version="1.0" encoding="UTF-16"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Body>
    <dis:Login xmlns:dis="http://www.sap.com/SBO/DIS">
      <DatabaseServer>confDatabaseServer</DatabaseServer>
      <DatabaseName>confLagerDatabaseName</DatabaseName>
      <DatabaseType>dst_MSSQL2012</DatabaseType>
      <DatabaseUsername>confDBUser</DatabaseUsername>
      <DatabasePassword>confDBPassword</DatabasePassword>
      <CompanyUsername>confCompanyUser</CompanyUsername>
      <CompanyPassword>confCompanyPassword</CompanyPassword>
      <Language>ln_English</Language>
      <LicenseServer>confLicenceServer</LicenseServer>
    </dis:Login>
</env:Body>
</env:Envelope>
SBODI_Server.Node myNode = new SBODI_Server.Node();
var result = myNode.Interact(xmlCommand);

Could not load file/URL (file not found) error for JNLP file

I am completely baffled in trying to figure out why I am getting the following error for some JNLP files but not others:
Error: could not load file/URL specified: C:\Users\tom\AppData\Local\Temp\javaws2
java.io.FileNotFoundException: C:\Users\tom\AppData\Local\Temp\javaws2 (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileInputStream.<init>(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)I have Googled around this forum and elsewhere, and have seen reports that this error is IE-specific, and seems to have something to do with no-cache headers being sent, or with the client browser's cache being full or turned off (which is not my case). I saw the information in the JavaWS FAQ, which recommended turning off security constraints for the JNLP's URI. I tried that, and it didn't help. One of the very baffling things is that I have created several variations of the JNLP file, with varying combinations of jars and property resources, and some combinations always work while other combinations never work. Here's an example:
<jnlp spec="1.0+" codebase="$$codebase">
   <information>
      <title>demo app</title>
      <description>illustrates weird bug</description>
   </information>
   <resources>
      <j2se version="1.5+"/>
      <jar href="randomFile.jar"/>
      <property name="xxx" value="xxxx"/>
      <property name="swing.metalTheme" value="steel"/>
   </resources>
</jnlp>The above file always fails with the error shown at the top of this message. However, if I remove either of the two properties, it works fine. And I have created other variations with lots of properties, some of which work. All of these variations are in the same directory in the war file, served by the exact same servlet (a slightly modified version of the jnlp.sample.servlet.JnlpDownloadServlet provided with JDK 1.6.0_3). Assuming that a no-cache header is the problem, what on earth could be causing some JNLP files to always be served with a no-cache header, while others are never served with a no-cache header?
On a related note, any recommended debugging techniques for seeing what headers are being transmitted? I tried adding a simple check for a "debug=true" parameter in the servlet that causes it to set the content type to "text/plain" instead of JNLP, and that allows me to see (rather than execute) the JNLP XML that's being returned, but it doesn't show me the HTTP headers that are being sent back. If any caching headers are being set, I think it must be being set by the servlet container itself, as it's nothing being set in the servlet code that I can see. So I don't see any way on the server side Java code to output or log the actual HTTP response (or is there?). Any tips in that regard much appreciated.
Edited by: TomC125468 on Aug 19, 2009 1:35 PM

Hi Luca-Sanna,
Thanks for the response. Re browsers, yes, it fails in IE but it succeeds in Firefox. The info on the JavaWS FAQ and other places all seem to indicate that it's an IE issue concerning handling of the cache-control headers.
I should check in my webserver forum (Sun WebServer 7) to see about logging options. Sniffing on the client side is not possible, as my app is required to use HTTPS exclusively, and unfortunately that also precludes a telnet GET request.

Could not load file or assembly AjaxToolkit error in SharePoint 2013 Visual Webpart

I wanted to use ajax controls in visual webpart for sharepoint 2013 so i followed steps.
1-I cut this snippet (see below) from <head></head> Section and paste in <body></body> Section for my master page since it's a requirement for SharePoint 2013 ajax functionality.
Snippet:




2-downloaded a latest ajax tool kit and then added ajax toolkit dll from the toolkit library in my solution's bin-->debug folder
now add ajax entries in web.config in these sections
in <SafeControls>
<SafeControl Assembly="ajaxcontroltoolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e, processorArchitecture=MSIL" Namespace="AjaxControlToolkit" TypeName="*" />
in <assemblies>
<add assembly="AjaxControlToolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
in <controls>
<add tagPrefix="ajax" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=4.1.7.1213, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
finally registered ajax in visual web part as
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajaxtoolkit" %>
added following calender control
<asp:TextBox MaxLength="10" ID="txtToDate" runat="server" CssClass="FormTextBoxSmall"></asp:TextBox>
<asp:ImageButton ID="calReqDateTo" runat="server" ImageUrl="" />
<ajaxtoolkit:CalendarExtender id="CalendarExtender2" runat="server" targetcontrolid="txtToDate"
format="dd/MM/yyyy" popupbuttonid="calReqDateTo" />
reset iis and deployed my solution but when i deployed it throws error
"could not load file or assembly AjaxToolkit,Version=4.1.7.1213 "
please help

Hi,
In this below thread they have discussed and resolved your issue.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/60fa19fe-86a0-446b-b61f-11a82fe4287f/how-to-implement-ajax-toolkit-for-sharepoint2013?forum=sharepointdevelopment&prof=required
Please let us know if you need further details
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Convert-WindowsImage.ps1 Could not load file or assembly 'System.Linq,..' error

I tried the following:
.\Convert-WindowsImage.ps1
-SourcePath C:\Backups\All\Files\Windows8-ReleasePreview-64bit-English.iso -VHDFormat VHD -SizeBytes 52GB -VHDPath C:\AllSharedC\VPC\Win8.vhd
and got the following error in the log. .Net 4.0 full and WMF 3.0 RC are all installed.
Log
Windows PowerShell transcript start
Start time: 20120601112809
Username : Sys\User
Machine   : Sys (Microsoft Windows NT 6.1.7601 Service Pack 1)
ERROR : Could not load file or assembly 'System.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
INFO   : Log folder is C:\Users\Byron\AppData\Local\Temp\Convert-WindowsImage\942fccac-662a-4b2a-bfa9-6831892cad5c
INFO   : Done.
Windows PowerShell transcript end
End time: 20120601112809
How can I solve this?

Running on Win7 Ultimate with sp1. I'm sure I got all the prerequites installed.
System Requirements
Convert-WindowsImage can only be run on Windows 8 Consumer Preview, Windows 8 Release Preview, Windows Server 8 Beta, and Windows Server 2012 Release Candidate
operating systems.
Sorry man. As per above

Could not load file or assembly error

Hi,
We have a SharePoint application and custom solution upgraded from MOSS 2007 to SP2010. In one of the services I get an error - Could not load file or assembly 'Microsoft.SharEPoint.Portal.SingleSignOn, Version 12.0.0.0 ..............' or one of its dependencies.
I chked Visual Studio solution and I do not see any explicit reference to this dll. I read on web that Microsoft.SharePoint.Portal.SingleSign should be replaced with reference to SecureStoreService for SP2010. However in my custom solution I do not
see any explicit ref to SingleSignOn...
Anybody has any inputs on what I am missing here...
Thanks.
-http://lrathi.blogspot.com

Does the custom solution make any changes to the web.config file and adds assembly references there?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Could not load file 'Lodestar.Core.database' - Error on running MDM 1.6.1.0

Dear All,
We have Installed Oracle MDM Release 1.6.1.0 for Windows.
The environment we are using is Windows Server 2008 (64 Bit) and SQL Server 2008 for database.
But when we try to launch the application in the web browser (using "http://localhost/lodestar/ccs/Default.aspx"), we are getting the following error
"Could not load file or assembly 'Lodestar.Core.Database, Version=1.6.0.0, Culture=neutral, PublicKeyToken=51e7c3b020d761a7' or one of its dependencies. The system cannot find the file specified"
We tried searching 'Lodestar.Core.Database.dll' on our machine but could not find any file with this name.
Just for additional information below are the steps we followed to install the application:
1. We created the database by executing the EIP and MDM DB scripts.
2. We installed EIP and MDM in conjunction by running the setup file.
Any help to resolve the issue is appreciated.
Thanks in advance,
Kapil

Hi,
Have installed the EIP 1.6.1 in full mode on W2008 R2 server. But getting the below error on the login page
+*" framespacing="0" frameborder="0"> "> " border="0" frameborder="0" framespacing="0"> " scrolling="no" frameborder="0"> " scrolling="no" frameborder="0"> " frameborder="0">*+
Any ideas pls?
Regards
Arun

Error starting Queue Viewer: Could not load file or assembly

Dear All,
I'm having problems with Queue Viewer from my Windows 7 client.
The error has started from the Exchange 2013 SP1 installation on the Exchange Server; from that time, if I open the Queue Viewer from the Toolbox, I receive this error:
Could not load file or assembly 'Microsoft.Exchange.Data.Transport, Version=15.0.843.0.Culture=neutral, Public............... The system cannot find the file specified.'
Now I'm trying to install the SP1 on my local Windows 7 client, but the prerequisite check fail because it not find the necessary role.
There is a way to fix this problem?
Thanks

Hi ,
Please check the below mentioned links as well as check can you able to open the exchange toolbox directly in exchange 2013 sp1 servers.
http://support.microsoft.com/kb/2938053/en-us
http://blog.messageconcept.com/en/exsbr-on-exchange-server-2013-sp1/
After you install the exchange 2013 sp1 you need to install the hotfix mentioned on that link .
Regards
S.Nithyanandham
Thanks S.Nithyanandham
Thanks.
The queue viewer runs correctly on the Exchange Server and we don't use Third-party transport agents.

Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral

Hi,
I have a web site developed with vs 2010 (32-bit) and crystal report 13 (for sv 2010). It's working well i when crystal report installed in gac. I need to this app on a server WITHOUT crystal report installed. so I copied all required crystal assemblies into the bin folder and publish it. I always get following error message
Could not load file or assembly 'log4net, Version=1.2.10.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
I tried a lot of solutions in this forum, but none of them resolved my issue.
Please help!!
thanks,
Max

Stick with x86 or x64, not Any CPU.
Don't include log4net manually
Look at these Kbases:
[1543854 - Error: Could not load file or assembly log4net|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343333333833353334%7D.do]
[1550854 - "Could not load file or assembly 'log4net' or one of its dependencies" Error when building Visual Studio 2010 solution utilizing the Crystal Reports .NET Runtime|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353330333833353334%7D.do]
[1544693 - Error BC30560: 'CrystalReportViewer' is ambiguous in the namespace 'CrystalDecisions.Web'|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343334333633393333%7D.do]
[1548993 - Server Error in '/' Application when running .NET Web Application using Crystal Reports for Visual Studio 2010|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343338333933393333%7D.do]
- Ludek

Help with Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.

This was all working yesterday, but this morning, I cannot run in the dev fabric, or even setting the website project as a startup project directly, I get the following error:
Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'msshrtmi' could not be loaded.
=== Pre-bind state information ===
LOG: User = Andrew-VAIO\Andrew
LOG: DisplayName = msshrtmi
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: msshrtmi | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/
LOG: Initial PrivatePath = C:\Users\Andrew\Desktop\Beko2011Azure\Website\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\Andrew\Desktop\Beko2011Azure\Website\web.config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/bin/msshrtmi.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
[ConfigurationErrorsException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +618
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +209
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +94
System.Web.Compilation.BuildManager.CallPreStartInitMethods() +332
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +677
[HttpException (0x80004005): Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9079228
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +97
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +258
Note that the dev machine is x64 Win7.
I have not tried deploying this to staging since the issue started as I'm a bit nervous of touching the staging/live environment until this is solved.
Removing the PlatformTarget element from the project file has no effect
Removing the msshrtmi.dll file from the bin directory of the website project ends up with
'Could not load file or assembly 'Microsoft.WindowsFabric.Common, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified'
I have used Git to revert to the last working build to no effect (But I don't have the obj/bin folders in GIT), but it has atleast reset the project files etc.
If I return msshrtmi.dll to the bin folder and switch the model and website projects to x64 there is no change
If I switch both to x86 then I get an error Could not load file or assembly 'BekoModel2011' or one of its dependencies. An attempt was made to load a program with an incorrect format.
which is the model project - presumably because to run on my x64 machine I need the 64bit version?
I really need to be able to debug and then publish some changes ASAP.
Andrew

Hi,
Is it true that you're using IIS to host the application? Could you check whether the process is x64 or x86 one via task manager or config in IIS manager?
http://blogs.msdn.com/b/rakkimk/archive/2007/11/03/iis7-running-32-bit-and-64-bit-asp-net-versions-at-the-same-time-on-different-worker-processes.aspx
Allen Chen [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Could not load file or assembly 'CrystalDecisions.Shared, Version=12.0.2000

I downloaded the trial version of CR 2008 in order to test an update of a report from Crystal 10. I would also add that I am using CR 2008 embedded in Visual Studio .Net 2005. I was able to successfully upgrade the report and run it without issue from the .Net debugger. However when I deploy the report to the users machine when it attempts to display the report I get the following error:
Could not load file or assembly 'CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKey Token=692fbea5521e1304' or one of its dependencies. The system cannot fined the file specified.
Since I was able to successfully deploy the report with CR 10, my question is do I need to purchase a version of CR 2008 in order to deploy? I just want to make sure that this is indeed the issue prior to making the purchase. If that is not the case can you please point me to proper deployment procedures for 2008, perhaps there is something I am missing.
Thanks much for your assistance,
Mike

I will assume that when you are viewing the report you are using a custom app which uses CR 2008. To deploy your app you will need two things:
1. The Runtimes
2. A valid Keycode
You can obtain the Runtimes here:
Runtime Downloads
CR 2008 msi: https://smpdl.sap-ag.de/~sapidp/012002523100005985862008E/cr120_redist_install.zip
CR 2008 click once: https://smpdl.sap-ag.de/~sapidp/012002523100005986302008E/cr120_clickonce.zip
CR 2008 msm: https://smpdl.sap-ag.de/~sapidp/012002523100005985842008E/cr120_mm.zip
You can also find these by going to here:
https://www.sdn.sap.com/irj/sdn/businessobjects-downloads
and selecting "Crystal Reports", ".NET", and "Utility"
I'm not sure if your eval keycode will work to deploy - but even if it does, the application will eventually stop working when the eval period runs out. If you want it to keep working, you will need to purchase a permanent keycode.
Shawn

SAP Dashboard Design Startup Error "Could not load file..."

Similar Messages

Maybe you are looking for