SAP DMS : Error when opening document with ECL control: INVALID_DATA

We are receiving following error while try to view .FAX file through SAP Document viewer
"2D viewer - Unable to opend Document"
"Error when opening document with ECL control: INVALID_DATA"
Appreciate your quick effort.
Thanks,
Sam.

Yes, We have checked in both ways, I have also followed other threads on the same issue
But not able to find the solution for the issue. We are facing the issue when we are using files scannned by Kodak Scanner i1420 in tiff format.
But If I will attach any other tiff files from directory then It can viewed through SAP Document Viewer.
I appreaciate your help in this regards.
Thanks,
Sam,

Similar Messages

  • Error when opening document with ECL control: INVALID_DATA

    Hi Gurus,
    I've tried to search the net for this problem but could not find anything and I'm stuck now.
    Description:
    we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
    when we try to open this document, time-to-time we get following error:
    Error when opening document with ECL control: INVALID_DATA
    Message no. SDV004
    by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
    what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
    It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
    Thanks,
    David

    Hi Christoph,
    thanks for tip, unfortunately this was already flagged, currently settings are:
    for Display Settings:
    yes - include ECL control
    use HTML control
    empty - maximum viewer wait time
    (do you think that setting some value for this could help)
    yes - deactivate generic object services in viewer
    no - doc display as dialog box
    yes - deactivate data provider cache
    Storage Settings:
    yes - always copy document class from document type
    yes - permit multiple assignment
    Thanks,
    David

  • Error When Opening Document

    I receive the following error when opening a Web Intelligence Document, no matter the user.
    C​a​n​n​o​t​ ​i​n​i​t​i​a​l​i​z​e​ ​R​e​p​o​r​t​ ​E​n​g​i​n​e​ ​s​e​r​v​e​r​.​ ​(​E​r​r​o​r​:​ ​R​W​I​ ​0​0​2​2​6​)​ ​(​E​r​r​o​r​:​ ​I​N​F​ ​)
    I also cannot run any reports. Anyone have an idea? I cannot seem to find any information in the knowledgebase on that error.

    Phasenjager,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Error when open document

    Dear All Experts,
    This following vb6 code in B1 2007 PL49 version is running but give error when I try to open SO document form :
    Public Sub process_139(ByVal FormUID As String, pVal As SAPbouiCOM.ItemEvent, BubbleEvent As Boolean)
    Dim KeyField As String
    Dim oRs As SAPbobsCOM.Recordset
    Dim strquery As String
      If pVal.EventType = et_FORM_LOAD Then
          'If pVal.Before_Action = True Then
               Set oForm = SboApplication.Forms(pVal.FormUID)
               'Add edit text component to fill with city name
               Set oItem = oForm.Items.Add("Static1", it_STATIC)
               oItem.Top = oForm.Items("8").Top + 15
               oItem.Left = oForm.Items("8").Left - 5
               'Add static text for identifier city name
               Set oItem = oForm.Items.Add("Label1", it_STATIC)
               oItem.Top = oForm.Items("11").Top - 15
               oItem.Left = oForm.Items("11").Left
               Set oStatic = oItem.Specific
               oStatic.Caption = "City Name"
               Set oItem = oForm.Items("12")
               Set oEdit = oItem.Specific
    the error message is:
    Run-Time error  '-7012 (ffffe49c)'
    Item-already exist [66000-13]. Form unique Id : F_14, Item unique Id : Static1
    The error is not happened when run in previous version e.g. 7.2 or 2004.
    Pls give advice. I really appreciate your help. TIA
    Rgd,
    Steve

    try it as
    Dim KeyField As String
                Dim oRs As SAPbobsCOM.Recordset
                Dim strquery As String
                If pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_LOAD Then
                    If pVal.BeforeAction = True Then
                       ' Dim oform As SAPbouiCOM.Form
                        oform = SBO_Application.Forms.Item(pVal.FormUID)
                        'Add edit text component to fill with city name
                        oitem = oform.Items.Add("Static1", SAPbouiCOM.BoFormItemTypes.it_STATIC)
                        oitem.Top = oform.Items.Item("8").Top + 15
                        oitem.Left = oform.Items.Item("8").Left - 5
                        'Add static text for identifier city name
                        oitem = oform.Items.Add("Label1", SAPbouiCOM.BoFormItemTypes.it_STATIC)
                        oitem.Top = oform.Items.Item("11").Top - 15
                        oitem.Left = oform.Items.Item("11").Left
                        'Dim ostatic As SAPbouiCOM.StaticText
                        oStatic = oitem.Specific
                        oStatic.Caption = "City Name"
                    End If
                End If

  • Error when opening documents in a collaboration-room using vpn

    hello everybody
    i have the following problem:
    by using vpn (virtual private network) i can access to the portal and enter a collaboration-room, but when i try to open a document in the collaboration-room, i always get the error that the page can not be displaied. users which are in the "portal-network" can open these documents, but users with vpn-access can not.
    do you have any idea where the problem could be? thanks for helping.
    greetings
    flo

    > hi karin
    >
    > thank you for your help. when i tried with "your"
    > URL, the error doesn't occur but when i then click on
    > "Web-Folder", the following message appears:
    >
    > "The entered address of the Web-Folder is too long.
    > Use a shorter address."
    That's a bug in Internet Explorer. You may be able solve that by following the instructions at http://support.microsoft.com/?kbid=325355.
    > 1. what can i do to shorten the adress?
    Use the name of a parent folder, then navigate down.
    Best regards, Julian

  • Error when opening page with the web browser activex

    I have downloaded the example for using the web browser activeX component to display a web page. It basically works, but it keeps returning an error (from NI's web site) that I don't see when opening the site from IE. The message I get is:
    Are there things that need to be initialized when calling the browser in this way?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

    Mike,
    It looks like ni.com is not supplying that particular console object which is causing an issue with the embedded instance of IE9. Every other website I've tried works correctly. I've looked around the ActiveX methods to intercept and ignore this error, but I haven't found anything yet.
    For others' reference, here is the link to the example:
    https://decibel.ni.com/content/docs/DOC-2042
    Karl G.
    Applications Engineer
    ni.com/support

  • Pesky error when opening document

    I have a document (actually several, based on each other) that somehow ended up with a message that comes up every time I open it.  Sorry that I don't know what the exact wording would be in English (I have the Japanese version of CS2), but it's something like: Cannot create composite font "^1". (I think "composite font" is the right term, but I'm not sure - it's the only logical translation of the Japanese word that actually seems to be a real term in English.)  I click OK and the document opens fine, but I'd like to clean up whatever is amiss.  There is no complaint about any fonts in the Search Fonts dialog, and I don't even know what a composite font is (all the Google hits seem to be related to PDF, but I don't think I have ever even used this document to make a PDF, and the error happens when I open the .indd file), so I don't know where to look for what to get rid of in the document so that the error does not appear.  Any guidance?

    Thanks for the response.  I'm not having any other problems with the document that I am aware of, and I had been ignoring this error for a couple years, but it was starting to bug me.  So at your suggestion I decided to try the INX trick.  But that had even more dramatic results.  I had no trouble exporting the INX file, but when I tried to open it while another document happened to be open, I got the following message (again, all quotes from messages are translated from Japanese by me, so the English might not match exactly):
    Adobe InDesign is shutting down.  A serious error has been detected.  If there are unsaved documents, restart InDesign and restore your work.
    When I clicked OK on that message, another popped up on top of it:
    Application Error: The command "0x4f79d17c" referenced memory "0x00000014".  The memory could not become "read".  To shutdown the program, click OK.
    (Yes, I know that sentence makes no sense, but that's what the Japanese said.)  Even after a reboot it happened again, but the other document had also appeared (because of the recovery mode).  So I opened ID just so I could close the other document, closed and reopened ID with nothing else open, and tried opening the INX file again.  This time I got the original error about the composite font even on the INX file.  Hmph!
    So unless you have another idea, I guess this ghost will haunt me permanently...

  • "Attempted to use an object that has ceased to exist" error when opening list with grouping and item level permissions

    Hi All,
    I have a list with few items. If I break role inheritance for at least one item and try to open list view page, I receive this error:
    Attempted to use an object that has ceased to exist. (Exception from HRESULT: 0x80030102 (STG_E_REVERTED))
    This occurs only if view has GroupBy in query. If I remove grouping from view, then error disappears. But I need to have grouping in view as well as item level permissions.
    How can I achieve this? Is this some limitation?
    Any help will be appreciated.
    The full stacktrace:
    System.Runtime.InteropServices.COMException: Attempted to use an object that has ceased to exist. (Exception from HRESULT: 0x80030102 (STG_E_REVERTED))    
    at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListContentTypes(String bstrUrl, String bstrListName, ISPDataCallback pXMLCallback)     
    at Microsoft.SharePoint.Library.SPRequest.GetListContentTypes(String bstrUrl, String bstrListName, ISPDataCallback pXMLCallback)
    System.Runtime.InteropServices.COMException: Attempted to use an object that has ceased to exist. (Exception from HRESULT: 0x80030102 (STG_E_REVERTED)),
    StackTrace:    
    at Microsoft.SharePoint.SPContentTypeCollection.FetchCollection(IList`1 exceptions)     
    at Microsoft.SharePoint.SPList.get_ContentTypes()     
    at Microsoft.SharePoint.SPCustomActionElement.QueryForToolbarButtons(SPWeb web, SPList list, SPListItem item, PAGETYPE pgtype)     
    at Microsoft.SharePoint.SPCustomActionElement.AddCustomToolbarButtons(SPWeb web, SPList list, SPListItem item, SPContext renderContext, PAGETYPE pgtype, ToolBar toolbarControl, WebPart webPart, Page page)     
    at Microsoft.SharePoint.WebControls.ViewToolBar.CreateChildControls()     
    at System.Web.UI.Control.EnsureChildControls()     
    at Microsoft.SharePoint.WebControls.TemplateBasedControl.OnLoad(EventArgs e)     
    at System.Web.UI.Control.LoadRecursive()     
    at System.Web.UI.Control.AddedControl(Control control, Int32 index)     
    at Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls()     
    at Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.CreateChildControls()     
    at Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.CreateChildControls()     
    at System.Web.UI.Control.EnsureChildControls()     
    at System.Web.UI.Control.PreRenderRecursiveInternal()     
    at System.Web.UI.Control.PreRenderRecursiveInternal()     
    at System.Web.UI.Control.PreRenderRecursiveInternal()     
    at System.Web.UI.Control.PreRenderRecursiveInternal()     
    at System.Web.UI.Control.PreRenderRecursiveInternal()     
    at System.Web.UI.Control.PreRenderRecursiveInternal()     
    at System.Web.UI.Control.PreRenderRecursiveInternal()     
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     
    at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     
    at System.Web.UI.Page.ProcessRequest()     
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     
    at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     
    at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     
    at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     
    at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)     
    at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     
    at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     
    at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     
    at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     
    at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     
    at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

    Does the site use any custom code? Not necessarily the task list but can be anywhere. If yes, ensure that current context SPWeb/SPSite objects are not being disposed off.
    This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

  • [SOLVED] scribus error when opening document

    I am trying to open some previously created scribus documents. 
    `--> scribus a.sla
    libpng warning: iCCP: too many profiles
    Scribus Crash
    Scribus crashes due to Signal #4
    Calling Emergency Save
    [1] 2731 segmentation fault (core dumped) scribus a.sla
    However scribus starts okay if I don't specify a file.  But trying to open the file from within scribus gives this message:
    Scribus Crashes due to signal #4.  This happens with some other files, also.
    Googling didn't find any information for signal #4
    I know the files used to open, I created them.  Any suggestions?  Thanks.
    Last edited by kekules_dream (2013-11-19 10:43:31)

    Which version of pixman?  Scribus segfaults here on opening any existing .sla with pixman newer than 0.30.2.  Compiled 2 later versions, no go so far, so staying with pixman 0.30.2 for now.
    PS  Rebuilds of both cairo and scribus on new pixman did not fix the issue.
    Last edited by abveritas (2013-11-18 16:15:59)

  • Get error when opening device with example code

    I look in measurement and automation tool and see my device as device 1 but when I run the "Read Dig Chan" example application I get error -200220 - "Device indentifier is invalid"

    Hey Grssmith,
    Check to make sure your device is present in the Measurement and Automation Explorer under NI-DAQmx Devices. Depending on which board you�re using it will most likely be listed under both NI-DAQmx Devices and Traditional NI-DAQ Devices. The Read Dig Chan example uses the NI-DAQmx driver so it references the device labeling under NI-DAQmx Devices. If you are using the Read Dig Chan LabVIEW example all of your available choices should populate in the pull-down menu of the I/O control.
    Please post back if you�re still having problems.
    Sarah Miracle
    National Instruments

  • Error when attaching Documents during Process Control to Submit Data

    Hi,
    In HFM 411 the user's were able to attach documents (that were earlier uploaded to Custom Documents) in the Process Control while submitting the Data. In 931 they receive an error message that says it is unable to change the review level. However tehy are able to submit the data without attaching documents.
    The security set-up seems to be fine, as the admin receives an error message as well, but this time it says "Invalid Javascript returned by the server".
    Anyone any idea?
    Thank you so much for your help.

    Hi,
    I (as administrator) manage to attach document at every step of review level process.
    Can you check that MaxNumDocAttachments and MaxDocAttachmentSize are correctly set up in the metadata (application settings).
    Besides HFM User Guide stands : "To attach or extract any custom documents to or from the server, you must be assigned the Manage Custom Documents security role."
    Hope this is helpful.
    Regards,
    Lionel.

  • Error while opening document in FB03

    Hi,
        I have used archive link for attaching documents. I have attached a pdf file by using the transaction OAAD to an accounting document. In FB03 it is showing the the document name by following the path
    Environment>>Additional assignments>> object links.
    But while trying to open the file I am getting the below message.
    Error when opening document with HTML control;
    DP_ERROR_GENERAL
    Any help regarding  this will be appreciated.
    Regards,
    B P Singh

    For your problem,please see if the corrections indicated in SAP note 1502912 could help you out.
    Regards,
    Pradeepkumar Haragoldavar

  • Error when open fdf document from Safari

    Reproduced on
    * Adobe reader 9.1.0
    * Acrobat Pro 8.1.3
    NOT reproduced with Acrobat Pro 8.0.0( withou updates )
    have simple fdf document for example in root of disk c:
    =============
    %FDF-1.2
    1 0 obj
    <<
    /FDF
    <<
    /F (1.pdf)
    /JavaScript
    <<
    /After 2 0 R
    >>
    >>
    >>
    endobj
    2 0 obj
    <<
    >>
    stream
    endstream
    endobj
    trailer
    <<
    /Root 1 0 R
    >>
    %%EOF
    ================
    when open it with IE or FF, al works fine. but when try to open in safari  messagebox shown
    "There was an error when open this document. This file cannot be found."

    minified version of not worked fdf
    %FDF-1.2
    1 0 obj
    <<
    /FDF <</F (pdf.pdf) >>
    >>
    endobj
    trailer
    <<
    /Root 1 0 R
    >>
    %%EOF

  • I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

    I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

    In relation to my previous inquiry regarding inability to view a pdf file using Safari...
    Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
    Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
    Thanks again!

  • CF 8 CFPDF "Merged" document throws 131 Error when opened in Acrobat

    We are using CF 8 on Windows Server 2003 platform.
    Any CFPDF "Merged" documents are throwing 131 Errors when opened in Acrobat
    Tried re-saving the documents on local machine and still same problem. Tried opening in multiple versions of Acrobat, same problem.
    Individual documents created are opening without issue. It is Only when these documents are merged that this error occurs.
    We do not experience this behavior in our CF 10 environment.
    We are a Big, Slow moving enterprise here so not much chance of getting our CF 10 environments promoted to meaningful production use soon.
    Found virtually nothing in HelpX and nothing online of any value regarding this issue.
    Has anyone else experienced the issue noted in the title of this discussion?
    Has anyone a work around or solution?

    I am getting the same error even in Acrobat version 8.1.3.
    Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking  ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
    Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
    Code 4002: PDF content contains erros.
    However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
    Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
    Awaiting reply!
    Regards.

Maybe you are looking for