SAP Query Language max retrieve size 512 bytes?

Hello,
Does anyone know if there is a 512 byte limit on retrieves from a table when using SAP Query Language? In other words the length of all the fields in the retrieve can't exceed 512 bytes?
Thanks

Hi,
And also you need check this thread
May this will help you out.
a®

Similar Messages

SAP Query - how to retrieve data within another program / FM

Hi,
I need to retrieve data from SAP Query, but when I used SUBMIT ..., the program results dump, because it is called within open custor loop.
Is there any another way, some FM or sth else?
thanks
Juraj

I already tried it, but I always get dump with CX_SY_OPEN_SQL_DB exception.
The problem is, that I tried to execute the query within open custor loop and this exception is caused by calling commit work somewhere in query report.
therefore I try to find another way
thanks
Juraj

Is my OS block size 4096 or 512 bytes?

Hi!
I am working on RHEL 4.5 ES edition. I have an installation of an Oracle 10g database whose files spread out over two separate partitions /u01 and /u02 that show a block size of 4096 using dumpe2fs.
dumpe2fs /dev/sdb1 | grep 'size'
dumpe2fs /dev/sda7 | grep 'size'
Block size: 4096
Fragment size: 4096
Inode size: 128
Using a different method of deriving the OS block size by querying v$archived_log I get the output of 512.
Is the v$archived_log method of finding the OS block size incorrect?
Thanks and Regards,
Aniruddha

What does
/sbin/tune2fs -l /dev/xxx
return? 4096 only? If yes, then your block size is 4096.
From http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_1016.htm#sthref3455
The online log logical block size is a platform-specific value that is not adjustable by the user.
So may be it is fixed at 512 bytes.
Others: Please comment.

What USB storage devices have a block size of 512 bytes?

After pulling my hair out for weeks trying to get a usb hard drive to work with my new AirPort Extreme (802.11n), I ran across this
http://docs.info.apple.com/article.html?artnum=305038
AirPort Extreme (802.11n): USB storage device supported formats and protocols
You can connect USB-based storage devices to an AirPort Extreme (802.11n). Learn which formats and protocols are supported.
The AirPort Extreme (802.11n) supports USB storage devices that have a block size of 512 bytes, and are formatted as Mac OS Extended (HFS-plus), FAT16, or FAT32. Not all USB storage devices use a block size of 512 bytes.
The AirPort Extreme (802.11n) shares storage devices based on the format used to initialize the storage device. For example, if HFS-plus formatting was used, AFP and SMB/CIFS protocols are used to share the device on the network. If FAT16 or FAT32 was used, SMB/CIFS protocols are used.
The AirPort Extreme (802.11n) works with disks that have a single partition and are not software RAID volumes (no more than one volume per physical disk). If the disk is a self-contained RAID that presents itself to a computer as a single volume requiring no software support, then it is supported.
Note: Use AirPort Disk Utility to discover and mount AirPort Extreme-based volumes over the network.
Now, this information is not easily obtainable while
shopping for a new usb hard drive. How do I find out which
ones support this 512 byte block size????
Would have bee nice to know that not all usb hard drives
are supported by the AirPort Extreme (802.11n) before I
purchased it.
Thanks
J Riley

Duane posted a link to an unofficial 802.11n Airport Extreme Hard Drive Compatibility List.
http://www.ifelix.co.uk/tech/8014.html
Still not enough information to make an informed purchase that
will work.

Retrieve a corrupted standard SAP query (SQ01)

Hi experts,
We have an standard query that is giving a dump because an user has modified and transported it to consolidation and production systems.
I don't know if there's a way to compare versions and retrieve versions. Right now we have accessed to client 000 and we are analysing if it's feasible to retrieve the 000 version. The query is defined as GLOBAL (client independent) and it's assigned to an standard package /SAPQUERY/FIAQ.
I'm on the right way or maybe there's another solution that we're not taking into account?
More ideas would be appreciated.
Ismael
Message was edited by:
Ismael Mateo

Thanks for the answer Barry, this is clear.
But the problem is that all the systems are overwritten with the modified version (Development, Consolidation and Production) and we don't have the original version anywhere, therefore we can't export/import it.
As the query is a global query (not client dependent), a modification in the query also affects to the other clients. In this case this modification has been transported to all systems as well...
To correct that situation we want to identify the changes done by the user or retrieve the old version.
One solution would be to create one transport request from an external SAP system, with the same SAP version(ECC 5.0), and transport it to our system.
Before trying with this solution we want to know if there's any SAP standard tool to retrieve/compare query versions.

Could anyone provide the complete manual of SAP Query Creation

Hi,
Now I am learning to create SAP Query.
I viewed many questions and answers about SAP Query.
Some mentioned this,and some did that...
Could anyone provide a complete manual of SAP Query Creation for developers.
I can create SAP Queries step by step with it.

http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
useful
http://www.erpgenie.com/abap/code/abap47.htm
regards,
Prabhu
reward if it is helpful

Hi sap query doubt

where shud we add two additional fields in SAP query ? actually i am not able to locate the query but i have the program whch is generated along it . so in whch section of the query i shud write the logic to get two additional fields ?

Hi,
Already there are some Infosets (tables) defined in that query.
Go to that infosets and add extra fields which are there in those tables
or add extra infoset(table) and link it to the existing table with the key, then add that table field.
No need to write the code.
Only thing is to select that field on to the Selection screen or on to the output is required.
See the help:
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
reward if useful
regards,
Anji

SQ01 Sap Query - additional fields doesn't appear

Hi everybody,
i've created a SAP Query with transaction SQ01 but one of my additional fields doesn't appear when i execute my Query.
My query shows the G/L account number and the field status Group (table SKB1)
I just need to display equally the text field of "field status Group" but it doesn't work.
When i look at the parameters i can see that it makes the link between the table T004G and SKB1 in order to find the textfield but the field stay blank.
For information T004g is a Pooled table.
Is someone could help me?
Thank you

Hi,
First you need to create a structure in Data Dictionary - SE11. This structure will contain all the fields that you want to display in the query output.
Example - Name the Strucutre as zz_infoset01
fields of the structure( for your requirement )
BUKRS
SAKNR
FSTAG
FSTTX
Go to T-code SQ02
1) Enter the Infoset name - zinfoset01 press create
2) Enter a Short Description - G/L Infoset - 01
3) select radio button - "Data retrieval by program"
 and in "data structure" enter zz_infoset01
4) select "Integrated program" radio button
5) In the next screen click on the "Data reading program" push button(on the application toolbar)
6) An Editor will open with the following code
REPORT rsaqdvp_template .
declarations
(insert your declarations in this section)
DATA:
zz_infoset01 TYPE zz_infoset01 ,
it_data TYPE STANDARD TABLE OF zz_infoset01 WITH HEADER LINE.
selection screen statements
(define your selection-screen here)
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_HEAD>
read data into IT_DATA
(select your data here into internal table IT_DATA)
output of the data
(this section can be left unchanged)
LOOP AT it_data.
zq01 = it_data. .
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_BODY>
ENDLOOP.
7) when you insert your code in the sections it will look like this
REPORT rsaqdvp_template .
declarations
(insert your declarations in this section)
Tables:SKB1,
 t004g.
DATA:
zz_infoset01 TYPE zz_infoset01 ,
it_data TYPE STANDARD TABLE OF zz_infoset01 WITH HEADER LINE.
selection screen statements
(define your selection-screen here)
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_HEAD>
*These will be the input parameters for the query
parameters: sp_bukrs like skb1-bukrs,
 sp_saknr like skb1-saknr.
read data into IT_DATA
(select your data here into internal table IT_DATA)
*get all the G/L for com code and G/L in selection screen
SELECT bukrs saknr fstag
 INTO TABLE it_data
 FROM skb1
 WHERE bukrs = sp_bukrs
 AND saknr = sp_saknr.
output of the data
(this section can be left unchanged)
*for every G/L get the status text from t004g for lang 'EN'
LOOP AT it_data.
SELECT SINGLE fsttx
 FROM t004g
 INTO it_data-fsttx
 WHERE spras = 'EN' "Language
 AND bukrs = it_data-bukrs
 AND fstag = it_data-fstag.
zz_infoset01 = it_data. .
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_BODY>
ENDLOOP.
8) Save and generate the Infoset.By clicking on the generate button.
9) Now assign the Infoset to the query in SQ01 and select the output list fields.
let me know if you need more info. Also award points if helpful.
Regards,
Santosh

Siginficance of max heap size mentioned in configtool

Hi all,
could anyone please tell me the exact significance of
max heap size mentioned in configtool in SAP Netweaver in
1)Instance_ID
-servers general
-message servers and bootstrap
2)Dispatcher_ID
-general
-bootstrap
3)Server_ID
-general
-bootstrap
Which of these do i change to improve the performance?
I tried changing the max heap size specified in
Server_ID
-general
but i got the following error while trying to start the server in std_server0.out:
node name : server0
pid : 3452
system name : N02
system nr. : 01
started at : Tue Mar 20 21:53:37 2007
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 1912] MtxInit: -2 0 0
Error occurred during initialization of VM
Could not reserve enough space for object heap
Regards,
Namrata.

Hi,
The biggest impact to runtime performance will be adjusting the heap size of the server JVM. This is done in Server_ID->general. The JVM parameters entered here take precedence over parameters in Instance_ID->servers general. The server job by far do the most work in the Java engine and so it is very important that the JVM for the server node is tuned to handle the workload. Tuning the server JVM or even adding additional server nodes is dependent on the workload and the amount of work on the system.
Adjusting the heap for the other JVMs will have much less of an impact than adjusting the heap in the server JVM.
The dispatcher JVM heap settings may have a slight impact during runtime, but compared to the server jobs the dispatcher does relatively little work. Depending on your situation you may need to tune the dispatcher a little, but my experience has been that the default value for the dispatcher is usually sufficient.
The values for all of the bootstrap jobs may have an impact on startup time, but they will have no impact on runtime since these jobs go away once the system is up. From what I have seen the defaults values for the bootstrap jobs are sufficent.
I never adjust anything under Instance_ID, I'm not sure what these parameters are used for except for maybe default values when adding server nodes. Maybe someone out there knows.
Hope this helps.
Regards,
Kolby

EJB Query Language where condtion based on date

Hi,
I am using EJB3 query language. In the table I have a column called requestdate which is in date time format. I have created an entity class.
I need to select few records using query language(named queries) based on this requestdate matching to the current date. I want to compare only based on Date value (truncating the time). Something like this
select max(o.req_id) from requests o where o.requestdate = :currentdate
currentdate is java.sql.Date value formatted to yyyymmdd only.
How can I do this using query language?
Please help to me get this done.
thanka
Anuradha

Hi Anuradha ,
I'm afraid the query language does not support retrieving the date portion (i.e. truncating the time) from a date field.
I propose you turn you named into a BETWEEN query taking two parameters one for the beginning of the day and another for the end of the day. Then your named query could look like:
SELECT max(o.req_id) FROM requests o WHERE o.requestdate BETWEEN :start AND :end
The following code creates two calendar instances for the current day, one for 00:00:00 and another for 23:59:59:
Calendar start = Calendar.getInstance();
start.set(Calendar.HOUR_OF_DAY, 0);
start.set(Calendar.MINUTE, 0);
start.set(Calendar.SECOND, 0);
start.set(Calendar.MILLISECOND, 0);
Calendar end = Calendar.getInstance();
end.set(Calendar.HOUR_OF_DAY, 23);
end.set(Calendar.MINUTE, 59);
end.set(Calendar.SECOND, 59);
end.set(Calendar.MILLISECOND, 999);
Here is some sample code that creates a query instance for a named query called findMaxRequestPerDay and passes the Date of the above Calendar instance as actual parameter values. It assumes the named query is called findMaxRequestPerDay and the req_id field is a long:
Query query = em.createNamedQuery("findMaxRequestPerDay");
query.setParameter("start", start.getTime());
query.setParameter("end", end.getTime());
Long max = (Long)query.getSingleResult();
I hope this helps.
Regards Michael

EJB query language help!!

Hi all, I have been trying to run a ejb query on JBoss 4.0.5, using built in hypersonic db, For some strange reasons am able to fetch all objects from db without any where clause but if am using a where clause with an attribute name from the entitybean am unable to retrieve any results.
I get an org.hibernate.QueryException, could not resolve property : "property name"
My ejb query looks like this...
SELECT template FROM TemplateSelect template WHERE template.template_name='Template_One'
TemplateSelect is my entity bean class and I do have an attribute named template_name in my bean class.
could any one please suggest me what could be wrong and also direct me to a good tutorial on ejb query language as well as I am fairly new to hibernate and ejb3 !
tons of thanks in advance!
pravin

Hi Anuradha ,
I'm afraid the query language does not support retrieving the date portion (i.e. truncating the time) from a date field.
I propose you turn you named into a BETWEEN query taking two parameters one for the beginning of the day and another for the end of the day. Then your named query could look like:
SELECT max(o.req_id) FROM requests o WHERE o.requestdate BETWEEN :start AND :end
The following code creates two calendar instances for the current day, one for 00:00:00 and another for 23:59:59:
Calendar start = Calendar.getInstance();
start.set(Calendar.HOUR_OF_DAY, 0);
start.set(Calendar.MINUTE, 0);
start.set(Calendar.SECOND, 0);
start.set(Calendar.MILLISECOND, 0);
Calendar end = Calendar.getInstance();
end.set(Calendar.HOUR_OF_DAY, 23);
end.set(Calendar.MINUTE, 59);
end.set(Calendar.SECOND, 59);
end.set(Calendar.MILLISECOND, 999);
Here is some sample code that creates a query instance for a named query called findMaxRequestPerDay and passes the Date of the above Calendar instance as actual parameter values. It assumes the named query is called findMaxRequestPerDay and the req_id field is a long:
Query query = em.createNamedQuery("findMaxRequestPerDay");
query.setParameter("start", start.getTime());
query.setParameter("end", end.getTime());
Long max = (Long)query.getSingleResult();
I hope this helps.
Regards Michael

Diff. bet ABAP and SAP Query

HI
Anybody can explain in detail about ABAP and SAP Query.....
And tell me what is the main diff. bet ABAP and SAP Query...
Regards
S.Baskaran

SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly.
Check out these links.
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
Kindly reward points by clicking the star on the left of reply,if it helps.Kindly close your previous threads if your problem is solved and reward points for helpful answers.
Don't forget to reward if useful...

Diff between sap query and abap query

diff between sap query and abap query

Hi,
ABAP query is mostly used by functional consultants.
SAP Query :
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query,:
As far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
regards,
vasavi.
reward if it is helpful.

SAP Query & ABAP Query

Hi,
I just want to know the difference between SAP Query & ABAP Query.
How to procede with these two methods,Which method is used for which purpsoe.
In which cases SAP Query is prfered or in which cases ABAP Query is prefered.
Thanks in Advance,
Irfan Hussain

Hi Irfan,
This is what sap help says,
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly.
Regards,
Ravi

BI SAP Query Connector test fails!

BI SAP Query Connector test is failing in Portal 7.0 SP6
Scuccessfully tested BI SAP Query connector using the
URL : http://<myhost>:51200/TSapq/servlet/TestSapq
But when i try to test from the portal its failing
The Connection properties are defined both in Connection Connector in Visual admin as well as Portal as follows and user mapping is done as follows.
Application Server myhost.xxx.net
Client : 010
Message Server : myhost.xxx.net
Query Area : x
System Number : 12
System Name : BWT_SAPQ
Master Language : en
User Management
Logon Method : SAPLOGONTICKET
User Mapping : Admin, User
In User Administration i have maped the BWT_SAPQ system and provided user id and password.
Below is test result
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Would really appreciated your help on this.
Thanks,
Srinivas

hi Aamod;
it seems like you already have your BI SAP Query system working properly, if you can use it in the BI Integration Wizard. what's the problem you're seeing in VC?
systems created with the BI SAP Query Connector are relational systems and therefore expose tables and fields in VC. via the BI Connector, these systems are 'lent' BI functionality and you can use these tables in the BI Integration Wizard, as you've seen. you might therefore call these "relational BI systems" (just like systems created with the BI JDBC Connector are).
if you have consulted the System Landscape documentation on configuring properties for a BI SAP Query System (<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/4b/9afe3323d14005a283dee9101c66fc/frameset.htm">here</a>) and you're still having problems connecting with the BI SAP Query Connector, i'd suggest you write up a CSS message.
hope it helps;
-m

SAP Query Language max retrieve size 512 bytes?

Similar Messages

Maybe you are looking for