SAP TAX is updated OK, Vertex is missing 2 weeks of tax data from SAP
Hello FI Gurus,
We have an issue where Vertex data are not updating for two weeks. Although when running report "RFYTXDISPLAY" all indicated that documents were updated to external system. We are mssing 2 weeks of data on the Vertext side. Does anyone know if there is a way to manually update SAP billing with tax to Vertex so it can be recorded?
Thanks in advance,
HarryT
Would need more detail on whether this is the last two weeks and issue still persists or if it was for only 2 weeks and everything now is fine.
If the RFYTXDISPLAY/ TRFC Queue is clear(unblocked), make sure that the transactions are listed in the queue by doc #.
How do you know the items aren't in Vertex?
You wouldn't be able to duplicate in SAP to write taxes to Vertex. It would throw off your G/L.
If you still have issues, I'd call Vertex support 800-281-1900
Similar Messages
-
Upload data from SAP R/3 to BPC
Hi Expert
We need to upload data from SAP R/3 Payroll to BPC into to use in a butget process. We actived 0HR_PY_1 extractor and we have data at PCA area. My question is how i can to load this data into a appset in BCP.
Please give any idea to do that.
ThanksHi,
There are multiple ways of extracting data from ECC to BPC.
If you have SAP BW implemented for your HR area then you can load data from SAP BW info provider to SAP BPC.
check out the following thread.... all these things are already widely discussed in the forum.... all thats required is to search.....
you have got to use Transformation and conversion files.....
[How to load Transaction Data from BW to BPC]
If SAP BW is not implemented then the other way is to extract the payroll data into Flat files and use the data manager package to upload the data.... you got to prepare transformation and conversion files for this as well.
Directly from ECC is not possible as of now.....
Regards,
Surya Tamada. -
How we will pull the data from Sap-Bi to sap-Bpc
Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AMTough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection... -
OWB 11gR2 extracting data from SAP - HELP
Hi everyone,
I have a question regarding the way OWB 11gR2 uses its SAP connector. I will present the scenario.
OS on Server: Windows Server 2003 64bit
DB: 11gR2 - 64bit
SAP JCO 2.19 (64bit)
OS on Client: Windows XP 32bit
Oracle Client 11gR2 - 32bit
SAP JCO 2.19 (32bit)
We are trying to get the data from SAP and it is simply not working. The error that we receive is:
20B40EC4][OWBWS.OWB] java.lang.Exception:
Starting Execution of ABAP Report CSKS_CSKS_TBL on Thu Jul 01 18:48:42 CEST 2010
JOBCOUNT = 17484201
$JOB_NAME
Completing Execution of ABAP Report CSKS_CSKS_TBL on Thu Jul 01 18:48:44 CEST 2010
2010/07/02-10:20:23-CEST [18987A33][OWBWS.OWB] Foreground Execution
2010/07/02-10:20:24-CEST [18987A33][OWBWS.OWB] Foreground Execution deployment failed
2010/07/02-10:20:24-CEST [18987A33][OWBWS.OWB] java.lang.Exception:
Starting Execution of ABAP Report ZOWB on Fri Jul 02 10:20:23 CEST 2010
ERROR: The file C:Öxxxxx.dat is already open
Exit on error: Execution of ABAP Report ZOWB on Fri Jul 02 10:20:24 CEST 2010
at oracle.wh.runtime.platform.operator.sap.NativeSAPOperator.execute(NativeSAPOperator.java:224)
at oracle.wh.runtime.platform.adapter.rtp.NativeExecutionAdapter.execute(NativeExecutionAdapter.java:43)
at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:70)
at oracle.wh.runtime.platform.service.controller.ExecutionController.execute(ExecutionController.java:23)
at oracle.wh.runtime.platform.service.ExecutionManager.run(ExecutionManager.java:36)
at java.lang.Thread.run(Thread.java:595)
Thank you.
Edited by: user8916416 on 02-Jul-2010 03:57Problem solved by recreating the mapping. Strange though.
Edited by: user8916416 on 02-Jul-2010 03:56 -
Extracting updated data from SAP R/3 to BOBJ DS
Hi all,
I have a doubt reg extracting updated data from SAP to BOBJ DS. For example i am extracting 50000 records from SAP table to BOBJ DS say its taking half an hour, after extracting data 10 more records have added in the same table. Do we need extract the whole record again or do we have some other way to extract only those 10 records from table.
Please help me. I have searched in forums but cudnt find the exact solution fyi.
Thanks,
GunaApart from stepd 1,2, you need to create a Target Data store and a table to load your MARA data.
3. Now the MARA data will be available in data store(DS_ERP), say table name as BO_MARA
Why do you want to change the table name? Are you planning to stage the data anywhere?
4. Create a dataflow source as BO_MARA, query transform and destination as a table
Data transport object is required if you are using R/3 Data Flow.
This would suffice just for a full load, if all your transformations can be incorporated inside the Query transform.
5. Do Transformation.
6. Transformed data will be available in target table.
Only after executing the job that the transformed "data" will be available in the target.
The above part mentions only about a Source, Query transform, Source Data Store and table.
Apart from these
You would require a Script object to write the condition, to SELECT the MAX timestamps. You would require Variables to be created in your job to redirect your job path and to restrict the data extracted.
Use your DataFlow in a Conditional object. If load type is first, in the then part use the dataflow which you might have already designed. Else part will have a replicated Data Flow with the above mentioned WHERE condtion in Query transform.
Suggest you to refer Desiger document and DI supplement for SAP as well. Inform if you are stuck.
Regards,
Suneer Mehmood. -
HOW to update real time data from sap to other application?
We have two option of passing data from sap to other system.
1. web service
2. through idoc.
can anyone tell me advantages & disadv. of these two options.
Which scenario shd we use web service & idoc.
How is idoc triggerred.?
Is it only through user exit?
Kindly suggest any other ways for interacting with a 3rd party system which does not use a file.Dear Libin,
IF you are using sap sytem as a sender then its better to use idoc's. Actually both systems (idoc and webservice) have there own advantages and disadvantages. Look up sdn for more info.
My personal choice would be idoc since with webservices you would need special tools like xml spy or altova and the skill to analyze and run those tools.,, its a little tedious..
Rgds
joel -
CC 5.2 Alert Generation - Not extracting any data from SAP
Hi there,
We are trying to use the alert function for critical transactions in CC 5.2. We have set the relevant parameters in CC. The Alert_Log.txt is created successfully but it is not extracting any data from SAP. Is there any settings that I am missing here, both in R/3 and CC 5.2? I really appreciate your help. Below is the Alert_Log.txt for your review.
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
FINEST: Analysis Daemon started background Job ID:41 (Daemon ID D:\usr\sap\CC1\DVEBMGS00\j2ee\cluster\server0\. Thread ID 0)
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Scheduling Job =>41----
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob run
INFO: --- Starting Job ID:41 (GENERATE_ALERT) - AlertGeneration_Testing
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 41 Status: Running
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
1@@Msg is AlertGeneration_Testing started
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO:
Background Job History: job id=41, status=1, message=AlertGeneration_Testing started
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Alert Generation Started @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Conflict Risk Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Critical Risk Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Mitigation Monitor Control Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: @@@@@ Backend Access Interface execution has been started @@@@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: @@System=>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO:
No of Records Inserted in ALTCDLOG =>0 For System =>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface append_TcodeLogFile
INFO: *********SOD Tcode Size=>0**************
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface append_TcodeLogFile
INFO: *********Alert Tcode Log File=>D:\cc_alert_log\cc_alert_log1.txt is created**************
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO:
File Output Log File Size ==>0----
For System =>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: -
Conf Last Run Date=>2007-12-12--Conf Last Run Time=>12:45:11--
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: ==$$$===Notif Current Date=>2007-12-20==$$$==Notif Current Time=>14:27:32===$$$===
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>1
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>CONFALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>2
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>CRITALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>MITALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: Start AlertStats.............
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: start:Sat Dec 01 14:27:32 CST 2007
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: now:Thu Dec 20 14:27:32 CST 2007
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: end: Tue Jan 01 14:27:32 CST 2008
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: Month 2007/12
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@=== Alert Generation Completed Successfully!===@@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 41 Status: Complete
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
0@@Msg is Job Completed successfully
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO:
Background Job History: job id=41, status=0, message=Job Completed successfully
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>41----Hi,
we have ran into similar issue of alert log being not displayed accurately in CC 4.0 version and we implemented the Note 1044393 - CC5.1 Alerts, it did work for us, as you are using CC5.2, I would recommend you to check the code and then try this note. But iam still skeptical whether this note will be helpful to you or not.
Thanks,
Kavitha -
How to extract Inventory data from SAP R/3 system
Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?
Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK -
Help Required -- Can we use SQL Query to READ data from SAP MDM Tables
Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
RegardsAll the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok -
Loading of transaction data from SAP ECC system failed
Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
HolgerHi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much! -
Data (Master Data Changes and Transaction Data) from SAP BW to SAP BPC 5.1
Hi guys
I have seen posts on this forum describing data transfers from SAP R/3 to SAP BPC. I assume the procedure for data transfers from SAP BW to SAP BPC 5.1 should be the same i.e. using SSIS packages.
However I have some unique requirements -
1. DATA AT DIFFERENT AGGREGATED LEVELS - I need data from SAP BW at different levels - Some data comes at Product level while other at Customer level and some at Project Level. The current procedure takes BW queries output in excel sheets (6 files) and then use the data manager package to load the data in SAP BPC 5.1 using appropriate transformation and conversion files. This procedure is highly manual and I am looking at using SSIS package to do this. However, because of having data at different levels, it becomes a little tricky. How can we achieve this using SSIS?
2. UPDATING MASTER DATA - I need to update the master data (dimension members) in SAP BPC 5.1 at the start of every month. The current procedure compares (in MS ACCESS) the data from the queries mentioned in 1 to the dimension members in SAP BPC 5.1 and spits a file with the new entries which needs to be manually updated in the appropriate dimensions using Admin Console. I am looking at automating this task. I cannot just replace all the contents of a dimension with the members coming from SAP BW since the dimension members contains some dummy members which are used for planning.
3. HIERARCHY CHANGES - What is the best way to capture the hierarchy changes in SAP BW into SAP BPC 5.1?
Please advise.
Thanks,
Ameya KulkarniHi Ameya,
how did you solve the described problems? Can you give some hints about uploading master data and updating the hierarchy?
BR, André -
Erros while loading data from SAP R/3
Hi Friends.,
I'm going to load data from SAP R/3 all FI Modules to SAP BW in SAND BOX, before going to load master and tran data i would like to know, what are the errors might usualy be occurred while loading master & tran data using completly Business Content Objects?
Pls can anybody tell me ?
Regards.,
Balaji K. ReddyHi,
Some of the errors will be :
1. Missing master data while loading transaction data.
2. Invalid characters
3. RFC errors
4. Data format errors
5. IDoc errors
6. Locks
7. Table space errors
Also look at the thread below :
Troubleshoot Errors while Data Extraction...!!!
Cheers,
Kedar -
Set up for Extraction the data from SAP ECC system
Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
HolgerHi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you! -
BW extraction settings for Billing Data from SAP ISU SYSTEM
Hi dudes,
iam currently extracting data from sap isu to bw systesm,but even after generation of many billingmaster dats i dnt find nay record to be extracted in bw system since some settings are missing in isu suystem for extarction process of Biliiing data,
Kindy help me in this regarding the settings to be made for succesful extraction from isu to bw
kr
rajDear Mr Memminger,
unfortunatly I was not able to find any hint about the same issue. As we have closed the FI-key we are waiting for any entry in RSA7. With RSA3 we get results but there are no entries in Delta Queue.
What I was surprised about is the fact that in SM58 there are some tRFC-entries for function module MEREP_DELTABO and target MAM_MI. That looks like error in delta handling. Although my colleague told me that is the integration to Mobile Asset Management and hence has nothing to do with the Delta handling problem.
But could give me a hint where to find the configuration setting for Delta queueing ?
Best regards,
Peter von Schubert
Edited by: Peter von Schubert on Jun 29, 2009 10:17 PM -
What is the best way to get data from SAP into BPC?What about getting data from BPC (like a template) into back into SAP?
Hi Sam,
Please find here the steps you should do
Step#1: In SAP With the help of ABAP program update data into a table.
Step#2: In regular interval pull data from SAP table to BPC staging tables in SQL server.
Step#3: Run import data manager package to update FACT tables from BPC staging tables on demand.
This is the best way and best approach to pull data from SAP to BPC.
Thanks and Regards,
Rajesh Muppala.
Maybe you are looking for
-
how to create an apple account without using a credit card. Im trying to use gift cards but it says i need to usea credit card what can I do
-
Package javax.persistence does not exist
Hi, I'm a beginner on Weblogic, sorry my so simple and basic question (and my bad english). But I'm trying to build the weblogic examples ("ant build", as the documentation says) and got error messages like this: Buildfile: build.xml clean: init: [mk
-
Satellite A500 - How to update BIOS?
Hi, i've wanted to update my notebook to the new bios version 1.30. i've startet the windows based update. the update failed in the middle(6 pakets or something left) of the installing process and the system was frozen. after i've rebooted, i wanted
-
HOW DOES ONE GET INTO McAfee GET THE TYPE OF VIRUS...
A scan has just told me on the security report that it had found 2 Trojans. Can someone direct me as how to get further into McAfee to find out exactly which Trojans it picked up, just like every other system I have ever installed before ??? Thanks
-
Installing Photoshop CS6 (standalone) onnew PC
I recently purchased a new laptop and would like to install my registered copy of Photoshop CS6 on the new PC. I have my license code. How can I download and install the program?