SAP webdispatcher and URL redirect?

Hi,
I just installed SAP web dispatcher with the purpose of using it (similar to saprouter for sapgui) as single point of entry for all http(s) requests to our SAP systems.
I configured parameters icm/HTTP/redirect_x to accomplish that but to only limited success:
How do I have to set this parameter if I want to accomplish a redirect of the web dispatcher URL (1) to the webgui service running on system ECC (2)?
Example:
1. web dispatcher URL:
http://sapwebdisp:85/ECC/webgui (should be routed to url:)
2. http://saperpecc:8001//sap/bc/gui/sap/its/webgui/!
Is this posssible at all?
Thanks for any hints and tips in advance!

Hi
The parameter has the following syntax:
icm/HTTP/redirect_<xx> = PREFIX=<URL prefix>[, FROM=<pattern for URL>, FROMPROT=<incoming protocol>, FOR=<pattern for host name:port>,TO=<new URL prefix>, PROT=<protocol>, HOST=<host>, PORT=<port number/name>]
<xx> must be specified in ascending order from 0.
Optional Parameters
With the optional parameters FROM, FROMPORT and FOR
So your example the parameter would be:-
icm/HTTP/redirect_0 = PREFIX=/,FROM=/ECC/webgui,TO=/sap/bc/gui/sap/its/webgui/!
One point to note is that the URL you have provided has a double slash after the Hostname and Port which might be the root of your problem.
http://saperpecc:8001//sap/bc/gui/sap/its/webgui/!
Another point to note. If you are having problems with redirection via HTTP then HTTPwatch (basic version is freeware) can be used to check how requests are being directed. You can use this for testing your redirects.
Hope this helps.
Michael
Edited by: Michael Mulvey on Nov 11, 2008 5:27 PM

Similar Messages

SAP Webdispatcher and URL redirect - 3 systems, one webdispatcher

Good day,
I have the following scenario, webdispatcher in the DMZ that redirects to Enterprise Portal internally.
There is a role in EP which is setup for webgui to 2 seperate ERP systems.
Is it possible to have 3 seperate redirects on the webdispatcher for the external address https://external:port/irj/portal, i.e for
1) host1:port/irj/portal
2) host2:port//sap/bc/gui/sap/its/webgui/!
3) host3:port//sap/bc/gui/sap/its/webgui/!
The portal content works fine, as soon as I access the webgui role, no content is displayed.
Thanks
Derek

Hi,
If you want to use a single web dispatcher for 3 back office systems (EP, ERP&, ERP2) you need to use release 7.2 at least.
Check
[SAP Web Dispatcher for Multiple Systems|http://help.sap.com/saphelp_nw73/helpdata/en/b0/ebfa88e9164d26bdf1d21a7ef6fc25/frameset.htm]
Regards,
Oliviier

SAP Webdispatcher and EP

I have two sap webdispatchers (parallel operation) and one EP (with 4 app servers) and ECC (with 4 app servers) in landscape
Client --> reverse proxy (also webdispatcher) --> webdispatcher 1or2 (load balancing) --> EP --> backend
The scenario is that user will call the portal URL through the web dispatcher which will trigger a request in ECC system. I would like to confirm if wdisp/system_<xx> should be configured in Webdispatcher.
Do I need to configure another web dispatcher between EP and ECC system for loadbalancing of requests that are sent to ECC system ?
Thanks,

Hi,
If we have multiple app servers for an SAP system, we'll have multiple ICMs for one sap system... ? Pl. correct if this is wrong.
You, the basis admin, decides to activate the ICM (or not) on each instances (CI or DIA) with parameter rdisp/start_icman.
The most common configuration is to put the parameter in the DEFAULT profile to start the ICM on each instance
In such case, will our incoming HTTP request come through message server ? Can MS do load balancing between ICM's as well ?
MS can do http load balancing but it is not a good practice because it uses http redirects and does not hide the app servers from the user browser.
Lastly, if we have one sap webdispatcher interfacing ERP and EP system both (say, total of four ICM.. two each), how will the dispatcher decide if an incoming request, is for BSP running at ERP server or a portal page at EP ?
To use the same web dispatcher for 2 different systems, you need at least release 7.2 and you have to configure it to choose the back end system. One possibility is for exmple to use a URL prefix.
All of these informations is explained in details in help.sap.com...
Regards,
Olivier

Cisco ISE guest portal redirect not working after successful authentiation and URL redirect.

Hi to all,
I am having difficulties with an ISE deployment which I am scratching my head over and can't fathom out why this isn't working.
I have an ISE 3315 doing a captive webportal for my guest users who are on an SSID. The users are successfully redirected by the WLC to the following URL:https://x.x.x.x:8443/guestportal/Login.action?portalname=XXX_Guest_Portal
Now when the user passes through the user authentication splash screen they get redirected to https://x.x.x.x:8443/guestportal/guest/redir.html and recieve the following error:
Error: Resource not found.
Resource: /guestportal/
Does anyone have any ideas why the portal is doing this?
Thanks
Paul

Hello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again.

SSL termination and URL redirection

Hi All,
I have configured application in cisco ACE module for which i got more requirement for URL redirection.
Application setup is as below.
VIP : 10.232.92.x/24 which is pointing to 2 Web server 10.232.94.x/24 range. In addition to that app team want APP server also need to be loadbalanced hence new VIP is configured for 10.232.92.x/24 which is pointing to 2 different app server 10.232.94.x/24.
Both Web and App servers are having different IP but in same broadcastdomain. SSL termination is done on ACE.
Issue : 1) After initiating connection i am getting login page but after login its again giveing login page. After 2 to 3 trial its giving me application page but with invalid session error.
2) How to do https connection redirecting to different path.
Ex. https://apps.xyz.com to https://apps.xyz.com/abc
configuration :
probe tcp rem_app_tcp
port 2100
interval 5
passdetect interval 10
passdetect count 2
open 1
probe http rem_itsm_https
port 80
interval 5
passdetect interval 10
passdetect count 2
request method get url /keepalive/https.html
expect status 200 200
open 1
serverfarm host app_tcp
predictor leastconns
probe rem_app_tcp
rserver server1 2100
    inservice
rserver server2 2100
    inservice
serverfarm host rem_https
predictor leastconns
probe rem_itsm_https
rserver server3 80
    inservice
rserver server4 80
    inservice
action-list type modify http remurlrewrite
ssl url rewrite location "apps\.xyz\.com"
policy-map type loadbalance first-match app_tcp
class class-default
    serverfarm app_tcp
policy-map type loadbalance first-match app_https
class class-default
    serverfarm rem_https
    action remurlrewrite
class-map match-all VIP_rem_app_tcp
2 match virtual-address 10.232.92.8 any
class-map match-all VIP_rem_itsm_https
2 match virtual-address 10.232.92.9 tcp eq https
class-map match-all real_servers_vlan273
2 match source-address 10.232.94.0 255.255.255.0
policy-map multi-match VIPS
class real_servers_vlan273
    nat dynamic 1 vlan 273
class VIP_rem_app_tcp
    loadbalance vip inservice
    loadbalance policy rem_app_tcp
    loadbalance vip icmp-reply
class VIP_rem_itsm_https
    loadbalance vip inservice
    loadbalance policy rem_itsm_https
    loadbalance vip icmp-reply
    ssl-proxy server Remedy-SSL-PROXY

Hi Kanwaljeet,
I have applied below config for HTTPS URL redirection. Seems it dint work for me. Redirect serverfarm and policy map was not hitted.
access-list ANY line 8 extended permit ip any any
probe tcp rem_app_tcp
port 2100
interval 5
passdetect interval 10
passdetect count 2
open 1
probe http rem_itsm_https
port 80
interval 5
passdetect interval 10
passdetect count 2
request method get url /keepalive/https.html
expect status 200 200
open 1
ip domain-name nls.jlrint.com
ip name-server 10.226.0.10
ip name-server 10.226.128.10
rserver redirect REDIRECT-TO-HTTPS
webhost-redirection https://%h/arsys 301
inservice
rserver host serv1
ip address 10.232.94.74
inservice
rserver host serv2
ip address 10.232.94.75
inservice
rserver host serv3
ip address 10.232.94.76
inservice
rserver host serv4
ip address 10.232.94.77
inservice
serverfarm redirect REDIRECT-SERVERFARM
predictor leastconns
rserver REDIRECT-TO-HTTPS
    inservice
serverfarm host rem_app_tcp
predictor leastconns
probe rem_app_tcp
rserver serv1 2100
    inservice
rserver serv2 2100
    inservice
serverfarm host rem_itsm_https
predictor leastconns
probe rem_itsm_https
rserver serv3 80
    inservice
rserver serv4 80
    inservice
ssl-proxy service Remedy-SSL-PROXY
key Remkey.pem
cert Remcert.pem
class-map type management match-any MANAGEMENT_CLASS
3 match protocol ssh any
4 match protocol snmp any
5 match protocol icmp any
6 match protocol http any
7 match protocol https any
class-map match-all VIP_rem_app_tcp
2 match virtual-address 10.232.92.8 any
class-map match-all VIP_rem_itsm_http
2 match virtual-address 10.232.92.9 tcp eq www
class-map match-all VIP_rem_itsm_https
2 match virtual-address 10.232.92.9 tcp eq https
class-map match-all real_servers_vlan273
2 match source-address 10.232.94.0 255.255.255.0
policy-map type management first-match MANAGEMENT_POLICY
class MANAGEMENT_CLASS
    permit
policy-map type loadbalance first-match REDIRECT-PM
class class-default
    serverfarm REDIRECT-SERVERFARM
policy-map type loadbalance first-match rem_app_tcp
class class-default
    serverfarm rem_app_tcp
policy-map type loadbalance first-match rem_itsm_https
class class-default
    serverfarm rem_itsm_https
policy-map multi-match VIPS
class real_servers_vlan273
    nat dynamic 1 vlan 273
class VIP_rem_itsm_http
    loadbalance vip inservice
    loadbalance policy REDIRECT-PM
class VIP_rem_itsm_https
    loadbalance vip inservice
    loadbalance policy rem_itsm_https
    loadbalance vip icmp-reply
    ssl-proxy server Remedy-SSL-PROXY
class VIP_rem_app_tcp
    loadbalance vip inservice
    loadbalance policy rem_app_tcp
    loadbalance vip icmp-reply
interface vlan 270
description VIP
ip address 10.232.92.4 255.255.255.0
alias 10.232.92.6 255.255.255.0
peer ip address 10.232.92.5 255.255.255.0
access-group input ANY
service-policy input MANAGEMENT_POLICY
service-policy input VIPS
no shutdown
interface vlan 273
description Real server
ip address 10.232.94.66 255.255.255.192
alias 10.232.94.65 255.255.255.192
peer ip address 10.232.94.67 255.255.255.192
access-group input ANY
nat-pool 1 10.232.92.253 10.232.92.253 netmask 255.255.255.0 pat
service-policy input MANAGEMENT_POLICY
service-policy input VIPS
no shutdown

Sap webdispatcher and spnego

what needs to be done for sapwebdispatcher to work with spnego? we've done setspn for webdispatcher host, but it prompted us to login to webdispatcher server. Do we need to change any configuration in UME or j2ee engine?
Thanks
Jane

Hi
For using SPNEGO through a SAP webdispatcher you only need to create a SPN for the webdispatcher host like "setspn -A http/<webdisp-host> <j2ee-user>".
The <webdisp-host> must be FQDN like "host.domain.com" and the <j2ee-user> should be the J2EE service user created when configuring SPNEGO/kerberos for J2EE.
BR
Tom Bo

Session Timeout and Url Redirect in BlazeDS?

We have a JSF2 Webapp and Flex 4 integreated.
Question
1. How can we pass the parameters in web.xml to make FLEX4 redirect to login page when the session timeouts instead of giving a AMF Communication Error?
Thanks,
User.

hi, i am also struggling with the same problem, have you got any solution

Web dispatcher URL redirect

Hi ,
We have web dispatcher which is used for accessing portal and fiori using public url as below .
https://fiori.xyzcorp.com
https://portal.xyzcorp.com
But when they're trying to access via internet portal url goes to https://portal.xyzcorp.com/startPage by default it should route to irj/portal
Same for Fiori also I'm using the ICM redirect parameter still can't access
icm/HTTP/redirect_0 = PREFIX=/, FOR=portal.xyzcorp.com:*, TO=/irj/portal,
icm/HTTP/redirect_1 = PREFIX=/, FOR=Fiori.xyzcorp.com:*, TO=/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html?sap-client=800&sap-language=EN,
Could you please share you thoughts?

Hi Krishna,
Please go through below doc
SAP webdispatcher and URL redirect?
icm/HTTP/redirect_<xx> (SAP Library - SAP Web Dispatcher)
BR
Atul

NAC Framework URL-Redirect supported on ASA ?

Hi
Have anybody experience with URL-Redirects and URL-Redirect-ACLs when using NAC on ASA 7.x - are this supported Attributes - who has tested this successfully ?
regards,
Herbert
regards,
Herbert

think URL-Redirect is supported. You may check by changing RAC to use IP instead of url. If it works then in ASA add a name command for the url IP and change the RAC to way it was before. Following link may help you
http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/examples.html

How can we hide the URL with Webdispatcher after SSO redirect

Repost in correct forum
We have setup SSO with Kerberos and SPNEGO for NWBC and now we want to expose it to the internet via SAP Webdispatcher.
NWBC is on a singelstack ABAP system on server1 and we have configured a standalone J2EE system on server 2 for isuing the saplogon ticket.
This works fine with the redirect from icf NWBC -> Error Pages -> Logon Error -> Redirec to URL (Form Fields) http://server2:port/redirect/redirect.jsp
on server2 we have a java application (redirect/redirect.jsp) witch has %response.sendRedirect("http://server1:port/nwbc")%
Problem is that when the webdispatcher calls http://server1:port/nwbc the URL in the browser is hidden with MYDOMAIN.COM/nwbc but when the Logon-error (no saplogon ticket yet) is redirecting to http://server2:port/redirect/redirect.jsp the browser is showing the actual URL http://server2:port/redirect/redirect.jsp and also when returning to NWBC the browser is showing http://server1:port/nwbc.
And we don't wan't to expose hostnames (server1 and server2) to the internet.
I got this answer:
This question belongs to the SAP NetWeaver Application Server space, this space is for NWSSO topics only, the separately licensed product from SAP.
Regarding your question you have to configure Web Dispatcher for both AS JAVA and AS ABAP and refer to Web Dispatcher URLs only. That includes ICF node configuration and the redirect servlet. The URL generation in AS ABAP needs to be configured so that URLs are generated to point to the Web Dispatcher. Use table HTTPURLLOC for that.
But how do I set up webdispatcher for both ABAP http://server1:port/nwbc (this is working fine before SSO config.) and JAVA http://server2:port/redirect/redirect.jsp?
This is my profile on webdispatcher:
SAPSYSTEMNAME = SID
SAPGLOBALHOST = LOCALHOST
SAPSYSTEM = XX
INSTANCE_NAME = INS
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_CT_RUN)
#SAP Cryptolib
DIR_INSTANCE = D:\usr\sap\SID\INS
ssl/ssl_lib = D:\usr\sap\SID\INS\sec\sapcrypto.dll
ssf/ssfapi_lib = D:\usr\sap\SID\INS\sec\sapcrypto.dll
sec/libsapsecu = D:\usr\sap\SID\INS\sec\sapcrypto.dll
ssf/name = SAPSECULIB
wdisp/ssl_encrypt = 0
icm/HTTPS/verify_client=0
wdisp/add_client_protocol_header = true
wdisp/auto_refresh = 120
wdisp/max_servers = 100
ssl/server_pse = D:\usr\sap\SID\INS\sec\sid2SSL.pse
rdisp/mshost = <ip for abap server1
ms/http_port = <ms http port for abap server1
# Configuration for large scenario
icm/max_conn = 16384
icm/max_sockets = 16384
icm/req_queue_len = 6000
icm/min_threads = 100
icm/max_threads = 250
mpi/total_size_MB = 500
mpi/max_pipes = 21000
# SAP Web Dispatcher Ports
is/HTTP/default_root_hdl = abap
icm/HTTP/j2ee_0 = PROT=HTTP,HOST=Server2,PORT=5xxxx
icm/server_port_1 = PROT=HTTP,HOST=localhost,PORT=xxxxx
icm/server_port_0 = PROT=HTTPS,HOST=mydomain,PORT=xxx
icm/HTTP/mod_0 = d:\usr\sap\SID\SYS\profile\filter_rules.txt
icm/HTTP/admin_0 = PREFIX=/sap/admin,DOCROOT=$(DIR_DATA)$(DIR_SEP)icmandir,AUTHFILE=$(icm/authfile),PORT=xxxxx,HOST=LOCALHOST
and this is the filter_rules.txt
# Rules
if %{HTTP_HOST} RegIMatch MYDOAMIN.COM*
RegIRewriteUrl ^/$ /sap/bc/nwbc?sap-client=200
if %{HTTP_HOST} RegIMatch mydomain.com*
RegIRewriteUrl ^/$ /sap/bc/nwbc?sap-client=200
if %{HTTPS_HOST} RegIMatch MYDOMAIN.COM*
RegIRewriteUrl ^/$ /sap/bc/nwbc?sap-client=200
if %{HTTPS_HOST} RegIMatch mydomain.com*
RegIRewriteUrl ^/$ /sap/bc/nwbc?sap-client=200
I am new to this area

You can use Web Dispatcher for multiple systems, in your case one AS ABAP and one AS JAVA. See the documentation, Implement one webdispatcher for multiple systems - Basis Corner - SCN Wiki and Name-based virtual hosts and one SAP Web Dispatcher to access multiple SAP systems.

Webdispatcher URL redirect

Hi,
I have installed a webdispatcher, available under the url webdispatcher.our_company.de
Now I want setup a URL redirect, looks like this:
webdispatcher.our_company.de:50000/internal_server_one --> goes to internal server 1 at port 50001
webdispatcher.our_company.de:50000/internal_server_two --> goes to internal server 2 at port 50002
Is this possible? Can someone give me a link to a tutorial or a sap-note?
I search in google, in sdn and at the service marketplace, but I don´t found anything about this.
Thanks for your answers,
Bernd
p.s.: Sorry for my bad English

Hi,
when you install WD you bind it to the message server from your portal. 1 WD can only be connected to 1 MS.
The rules you can apply to the WD will make the redirects to the portal server. If you want to change the target server, use a full reverse proxy solution like Apache.
With ReverseProxy and ReverseProxyPass you can configure the targets for every URL.
ReverseProxy /server1 http://server1:50000
ReverseProxy /server2 http://server1:50001
etc.
br,
Tobias

SAP Webdispatcher :Images are not displayed after using the URL filtering

Hello,
I have installed the SAP webdispatcher 7.3 on Linux redhat 5.4 in front of the Portal 7.3.
I wanted to restrict the access just for the IRJ prefix so for this i used the parameter wdisp/permission_table = PermFile
with Permfile as follows:
#Denial of the useradmin URL from the WebDispatcher
P /irj*
P /irj/*
The filtering is working well except that for IRJ the images are not displayed so i was using so i added the following line to disply the images to the logon page
icm/HTTP/auth_
P /logon_ui_resources/*
P /logon_ui_resources*
but i still have the same issue for the irj page where no icons are displayed and i can do nothing.
The same issue also happened when using the icm/HTTP/auth_xx
Do you have an idea how to deal with this issue?
Thanks in advance;
Hassan

Hello,
After checking the HTTP code of the irj page on IE, i foud the needed URL to permit so i modified the permision table and it works fine for the moement
P /irj*
P /irj/*
P /logon_ui_resources/*
P /logon_ui_resources*
P /AFPServlet/*
P /AFPServlet*
P /com.sap*
P /com.sap/*
P /webdynpro/resources*
P /webdynpro/resources/*
Thanks for you help,
Hassan

Need to invoke a process from a column link and then redirect to a url

Is it possible to invoke a process from a column link then redirect to a url
I want to invoke a process that has a pl sql block of code which will do some table inserts and then redirect the user to an external url.
Any help would be appreciated.

Howdy Scott,
I thought this might help me but I've got a dynamic form with apex_application.g_f01(i) items on it ie tabular form. How can I take the value of these arrays with me to the temporary page with the onload process?
Thanks
Gary

Can URL redirects be configured with XE and what is the HTTP Server

I would like to be able to URL redirects. I'm running XE with Application Express 2.1.0.00.39.
I want to be able to have a URL like www.schoolwebsite.com and when the user hits it - have it redirect to the Apex page for the application. I was thinking that I needed to use a redirect in the HTTP config file, and that XE used Oracle_HTTP and I could configure in that manner.
But, I can't find an Apache directory.
1. What HTTP server is used with XE and Application Express 2.1.0.00.39?
2. Can I configure for this type of redirect?
3. Do I need to install an HTTP server to accomplish this?
Thanks,
Stephen

Hi Steven,
search for "proxy" in this forum.
It explains how to configure a plain Apache http server as a proxy to XE. Then you can use the default mechanisms to rewrite an url.
Here is an example (save the file as XE.conf and store it in the Apache conf directory (file httpd.conf is there).
The following instructions are valid for Apache2.
# Activate the following modules in httpd.conf:
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule headers_module modules/mod_headers.so
# include the XE configuration (this file XE.conf) in httpd.conf:
#include "conf/XE.conf"
# XE listener is buggy, thus downgrade to http 1.0
SetEnv force-proxy-request-1.0 1
RewriteEngine On
RewriteLog "D:\Programme\Apache Group\Apache2\logs\rewrite.log"
RewriteLogLevel 0
## Rewrite requests /apex, /i, /public, /sys to locally installed XE
RewriteCond %{REQUEST_URI} /(([^/]+)(/.*)*)$
RewriteCond %2 =apex [OR]
RewriteCond %2 =i [OR]
RewriteCond %2 =public [OR]
RewriteCond %2 =sys
RewriteRule ^/(.*) http://%{SERVER_NAME}:8080/%1 [P]
## Rewrite main page
RewriteEngine On
RewriteRule ^/$       http://%{SERVER_NAME}/apex/f?p=107:1 [R]
RewriteRule ^/index.html$       http://%{SERVER_NAME}/apex/f?p=107:1 [R]
## Rewrite /app1
RewriteRule ^/app1$      http://%{SERVER_NAME}/apex/f?p=107:1:0 [R=303]Regards,
~Dietmar.
Edited by: Dietmar Aust on Oct 14, 2008 1:16 AM

Local Director http probes with URLs and http redirect mode

I am trying to configure http probes on my Local director 430 running 4.2.3
I am using http redirect mode so the Virtual is bound to URLs not REALs with are linked to DIPs which are bound to REALs. So far the probes seem to not actually do anything. Does anyone know if the probes are compatible with URL redirect loadbalancing. And if so how one would go about configuring it.
Thanks for your help.

keepalive can be used for the probe notification in this case.
Check the following url for details.
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/bsccfggd/services.htm#xtocid727448

SAP webdispatcher and URL redirect?

Similar Messages

Maybe you are looking for