SAP XML Definitions

Hello,
How can I get the XML definitions for all docs out of SAP
- order & invoice - PO & AP invoice - delivery & return .
Thanks
Max

Hi Pradeep,
<i>>>>Is IDoc flat file not XML?</i>
The flat file format used when IDOCs are exchanged between two R/3 systems (ALE transfer), it is sequential segment based structure. Each segment is 1024 bytes.
It looks flat stream of bytes.
XI IDOC adapter converts the IDOC to this XML structure and sends it to XI. The schema is created when XI is used to download the IDOC definition (meta data) from the R/3 system. It generates a XSD for the same.
If you need XI to convert IDOC XML format to IDOC Flat format, refer to:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to convert between idoc and xml in xi 3.0.pdf
regards,
Pops V

Similar Messages

Validate xslt against JDK5 so we can remove the 'Use SAP XML Toolkit' flag

We are working on PI7.1 and have hit an issue with an XSLT mapping. We were getting an error when testing that said:
TransformerException during XSLT processing:
javax.xml.transform.TransformerException: com.sun.org.apache.xalan.internal.xsltc.TransletException: com.sun.org.apache.xalan.internal.xsltc.TransletException: java.io.FileNotFoundException
We found a few threads on SDN pointing us to using the 'Use SAP XML Toolkit' flag, which we'd not even noticed before. Ticking this flag did get us around the problem. Further investigation suggested to us, however, that this flag will not be available in future releases, so I guess our best solution would be to try and resolve the issues in our mapping against the current version of java (JDK5). When we use other tools such as XMLSPY they do not detect a problem with the XSLT. Can anyone point me to a tool that would enable us to validate our XSLT file against JDK5, which will provide us with error messages that will enable us to fix the error and therefore remove the 'Use SAP XML Toolkit' flag?
thanks,
Malcolm.

> Can anyone point me to a tool that would enable us to validate our XSLT file against JDK5, which will provide us with error messages that will enable us to fix the error and therefore remove the 'Use SAP XML Toolkit' flag?
I am sorry to have to say that even inside SAP nobody can answer this question.
In principle it will work when it is pure XSLT 1.1 but some commands from XSLT 2.0 might work also.

[Forum FAQ] How to get SSIS packages XML definition which are stored in SQL Server Integration Services instance

Introduction
Integration Services gives you the ability to import and export packages, and by doing this change the storage format and location of packages. But after import packages into package store, how can we get the package XML definition?
Solution
As we know, SSIS packages are stored in msdb using existing SSIS storage table([msdb].[dbo].[sysssispackages]). The “packagedata” column store the actual SSIS package with Image data type. In order to get the package XML definition, we need to convert “packagedata”
column through Varbinary to XML. You can refer to the following steps:
Using the following query to get package GUID:
SELECT [name],
[id]
FROM [msdb].[dbo].[sysssispackages]
Using the following query to convert packagedata column to XML: SELECT id, CAST(CAST(packagedata AS VARBINARY(MAX)) AS XML) PackageDataXML
FROM [msdb].[dbo].[sysssispackages]
WHERE id= 'ABB264CC-A082-40D6-AEC4-DBF17FA057B2'
More Information
sysssispackages (Transact-SQL):
http://msdn.microsoft.com/en-us/library/ms181582.aspx
Applies to
SQL Server 2005
SQL Server 2008
SQL Server 2008R2
SQL Server 2012
SQL Server 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi Ketak. Thank you for replying. I already followed your instructions - specifically -
You do not see the SQL Server Reporting Services service in SharePoint Central Administration after installing SQL Server 2012 SSRS in SharePoint mode
I get the following error when I run rssharepoint.msi on the APP sever (where Central Admin is installed). I have to run this other wise
Install-SPRSService and Install-SPRSServiceProxy
are not recognized as commands on that server.
Failed to call GetTypes on assembly Microsoft.AnalysisServices.SPAddin, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91. Could not load file or assembly Microsoft.AnalysisServices.SPClient, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
or one of its dependencies. The system cannot find the file specified.
macrel

Replacement of SAP XML Toolkit by JDK 5

Hi,
we have a lot of XSLT mappings with Java-Enhancement in our PI 7.1 system.
So we are using SAP XML Toolkit at the moment.
In the future release SAP doesn't want to support SAP XML Toolkit anymore.
So does anybody know what we have to do for using Java Enhancements in the future?
It's not possible for us to loose this functionality, we have to use XSLT mappings with Java calls in the future too.
Is there eventually a possibility to use a function
I didn't find any information about that on SAP Help ore anywhere else.
I hope anybody know how to do this.
Regards
Thorsten

Hello,
just started a few days ago enhancing XSLT mappings with Java extension functions.
I started out of SAP PI, using Saxon and Xalan. When moving to SAP PI (7.1 Enh 1) I experienced that the SAP XML Toolkit is working the "Saxon" way.
The transformer of SAP XML Toolkit identifies itself as from vendor InQMy Labs .
The transformer of JDK identifies itself as from vendor Apache Software Foundation (Xalan XSLTC) , which is the same as on my workstation running Oracle/Sun JRE 1.6.0_22 .
After some searching I found a hint at [Xalan, Java, XSLTC|http://rakeshdiscovery.blogspot.com/2008/12/xalan-java-xsltc.html] .
Using [the abbreviated syntax for extensions implemented in Java|http://xml.apache.org/xalan-j/extensions.html#java-namespace] mentioned there, I was able to run XSLT mappings with Java enhancements using the transformer of the JDK .
I still have a problem: One of my Java classes makes use of third party classes (e.g. from Seeburger). When testing the XSLT mapping in Operation Mapping I get an error "Failed to load and instanciate" with cause "Could not read properties" , even after importing the corresponding JARs as Imported Archive objects. This was not the case when running with SAP XML Toolkit .
I assume that the class loading mechanism, respective the classpath is different than before. So, if somebody knows a solution for this ...

Set default value for checkbox in XML definition

Hi,
I'ld like to set a default value to a checkbox (bound to UserDataSource) within the XML definition of my form.
Is this possible, and if so, how??
I'ld also like to know if there is a description available of all possible tags/combination in XML batchactions.
Kind regards,
Joeri

Hi Joeri.
I'm afraid you can't do that via XML, I think the only way to ensure that you have your box checked is through a UserDataSource, so use the Collections tab to connect your checkbox to an appropriate UserDataSource, and in the code, you can re-bind the checkbox to another datasource.
I hope my idea was clear
Best regards.
Younes

Sap Xml Idoc Inbound in Sap

Hi all
If I have to receive an Edi message from an external system (for example an Invoice from a vendor), could I get in Sap an Idoc from a flat file formatted as a Sap Xml format?
As Sap Xml format I mean the same structure of an xml file generated in Sap to the Xml file port.
(The sap r/3 system is a Sap Enterprise version)
Thanks in advance
Bye
Carlo
Message was edited by: carlo pergola

Hi
Thanks for the answer.
Regarding the FM IDX_XML_TO_IDOC, I thing that I can't use it directly because I have to write a program, I have to read the Xml file (that is located in a special directory of the operative system) and then use the FM putting xml data in the XML_DATA import parameter.
It's correct?
Bye
Carlo

SAP XML and SAP IDOC XML

Hi Friends,
Can any one tell me what is the difference between SAP XML and SAP IDOC XML?
Regards,
Kumar

Hi,
Various XML standards are supported by SAP. It presents data according to an SAP specification either in IDoc-XML or BAPI-XML, the SAP XML extensions for IDocs and BAPIs. It uses preprepared representations of the SAP interfaces to XML Commerce Business Language (xCBL) messages to facilitate communication with the MarketSet marketplaces.
Messages are stored in a generic envelope. This envelope contains metadata that controls, among other things, the routing of the messages. SAP supports two different standards for these envelopes - Microsoft BizTalk and a format similar to Simple Object Access Protocol (SOAP). Packaging SAP BAPIs in a standard envelope offers several advantages, including direct processing of messages by external applications and a uniform system of error handling.
Regards'
Aashish Sinha
PS : reward points if helpful

Use SAP XML toolkit

Hi Frnds,
I am working on migartion project SAP BC to PI7.1,we are reusing many XSLT Mapppings in PI7.1 from SAP BC.but when tesing XSL its giving error,when i select Use SAP XML toolkit option its working fine with warning messages.I read help.sap.com documentation SAP using using Use SAP XML toolkit option not a betetr design.
Why my XSLT not working when i tested without Use SAP XML toolkit option.
what are thing i need to chnage in XSL.
error message when i dont select Use SAP XML toolkit* option
TransfromerException during XSLT processing:
javax.xml.transform.TransformerException: com.sun.org.apache.xalan.internal.xsltc.TransletException: com.sun.org.apache.xalan.internal.xsltc.TransletException: java.io.FileNotFoundException
if i select option iam getting warning message but my XSL working fine.
help me on this issue.
Regards,
Raja Sekhar

Hi Stefan,
I am uisng Use SAP XML toolkit* option now for time besing as per sap doc its not a good idea to use.
my question is why its not working without Use SAP XML toolkit* option.
if i want to make my XSL work without this option Use SAP XML toolkit,what are the things i need to chnage in my XSL.
Regards,
Raj

Removing XML definition & XML tage from the XML message....

Dear All,
We are using PI 7.1 and implementing a scenario in which we need to send a signed payment message to our partner, our implemented scenario goes as follows:
1) We are using SOAP without header to send the message.
2) We are signing the payload using our own java code as UDF in graphical mapping.
3) the main issue that we have is that in the final XML message which is being sent to our partnet, XMl definition and the topmode XML tage are again added to the signed message. Please see the following for reference:
Source Message:
We are using only I node in the graphical mapping and one UDF to sign in between the source and the target node. So after signingwe get the following in the target node:
Signed Message
0u201A#u0152# *u2020Hu2020÷ ### u201A#}0u201A#y###1#0 ##+######0u201A#h# *u2020Hu2020÷ ### u201A#Y#u201A#U
u201A#ý0u201A#¸0u201A# ######5gu0152yu2022Ý¬½´b#¿#u2019 u01780 # *u2020Hu2020÷ #####0�Ý1#0 ##U####US1#0###U# ##VeriSign, Inc.1#0###U####VeriSign Trust Network1;09##U### BLAH BLAH BLAH SOME VERISGIN CERTIFICATE SIGNING INFORMATION
but the final message that get through the SOAP and reaches our partner look liks the following:
, as all this is appearing twice in our final message.
I'll appriciate if anyone can help us finding a solution for that, as we tried to remove it in our java class at the adapter level in the module tab, but that produces java error.
Regards,

Vijaya, we already have solved this problem by creating an EJB and adding it to SOAP Adapter processing modules, so rather signing our payload in the UDF in graphical mapping we are now signing the payload in the SOAP adapter module and removing any unwarranted characters etc over there as well. We cannot send SOAP with header in our scenario as it is adding hell lot of extra bites that our partner system cannot understand, so we have adapted the EJB way of solving it. Thanks anyways for your suggestion.
Athar Ullah Khan

RoboHelp 10 Compile Error: Cannot find xml definition file Template Error

Does anyone know how to resolve this error? I'm exhausted googling.
I generated Webhelp and got the error below. When I View the Help, nothing displays; IE browser does not open the Help.
Initializing compiler...
Generating WebHelp 5.50 (10.0.0.287)...
Error: Cannot find xml definition file C:\Program Files (x86)\Adobe\Adobe RoboHelp 10\RoboHTML\webhelp5Ext\template_skin\webhelp5skin.xml.
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.navpane.dhtml
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.navpane.list
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.toolbar
Template Error: can not resolve macro: WEBHELP_TEMPLATE.pane.minibar
Template Error: can not resolve macro: WT_DS_TOC_ICON_PAGE_REMOTE
Template Error: can not resolve macro: WEBHELP_TEMPLATE.topic
Template Error: can not resolve macro: WEBHELP_TEMPLATE.frame
Processing TOC data...
Processing Glossary data...
Processing Context-sensitive-Help data...
Updating HTML topics...
Finished updating HTML topics in 5 sec(s) : total 431 topic(s).
Processing Full-text-search data...
Finished processing Full-Text-Search data in 41 sec(s)
Applying WebHelp 5.50 Template...
..........................Template Error: can not resolve macro: WT_DS_SEARCHFORM_GO in C:\FuelsManager Primus\Web Application\Projects\FMHelp\Cirrus\whfform.htm
Error: Fail to update Template file whskin_frmset010.htm
Error: Fail to update Template file whskin_frmset01.htm
Error: Fail to update Template file whskin_frmset0.htm
Finished applying Template in 10 sec(s)
Finished compiling WebHelp in 107 sec(s)
Compilation complete.

Why Robo 8 would remove RH10 files is beyond me.
A reinstall of RH is sure to fix it. But if you PM me your email
address, I can send you a copy of the file (might save you a reinstall).
Kind regards,
Willam

CCM. Data upload SAP XML Format for CatalogueUpdateNotification

Hi everybody
Could anyone send me a SAP XML file example for CatalogueUpdateNotification?
My email [email protected]
Thanks in advance.
Raúl.

Hi Raul,
Sent.
Hope it will be useful.
and you can give me points.
BR
Dinesh

Development of: SAP- XML IDOC Validation - Mapping - EDI-VAN

Hi ,
I am novice to SAP.
I would appreciate, if you would suggest best way to achieve following Scenario:
With Minimum Cost. No High Cost middleware products, beacuse we have only following two scenarios.
1. SAP -
> XML IDOC (SHPMNT01) Validation -
> MapTo- EDI 404_4010------> FTP Loation
2. SAP----
>XML IDOC ZSHPEXT1 Validation -
> MapTo EDI 204_4010 -
> VAN
A. XML IDOC ZSHPEXT1 Validation error send error message to SAP
B.SMTP- Email if there is IDOC validation error or error in message.
Just for information: We have ERPConnect.
Thank You,

Hi
Thanks for the answer.
Regarding the FM IDX_XML_TO_IDOC, I thing that I can't use it directly because I have to write a program, I have to read the Xml file (that is located in a special directory of the operative system) and then use the FM putting xml data in the XML_DATA import parameter.
It's correct?
Bye
Carlo

Download of SAP XML Toolkit

Hi,
I want to use the SAP XML Toolkit to implement a Java Mapping. Where can I find this tool? From which URL can I download the tool?
Thanks to all!

Hi Gabriele,
You can find sapxmltoolkit library in the XI server.
Find the drive in which XI is installed and search the following .jar file:
\usr\sap\<SID>\DVEBMGS00\j2ee\admin\lib\sapxmltoolkit.jar
where <SID> is your system ID.
Finally, import sapxmltoolkit.jar in your Eclipse/NWDS project (as external library)
Best regards, Manuel
Please remember to reward points for useful answers and to close the thread if your problem is solved. Thank you

SAP XML Parser

Hi,
Can anyone tell me how the SAP XML Parser works in Abap?
And how to use it?
Thanks & Regards,
Jeba.

hi jeba,
Prior to SAP ERP 6.0 Enhancement Package 2 (EhP2), loading data for Central Contractor Registration (CCR) was a two-step process: data was first read from a flat file and preloaded into SAP tables, then a separate program was executed to create or update vendor master records by means of CREMAS05 iDoc. When EhP2 is installed, new CCR programs (FMFGCCR_CREATE and FMFGCCR_UPDATE) can be customized by means of an enhancement implementation to access CCR data in real time for example, using Point-to-Point or XI interface with the CCR server (see the documentation and sample implementation classes for enhancement spot FMFG_CCR_PROCESS).
New CCR create/update programs available in EhP2 receive and process CCR data which includes creating and updating SAP vendor master records based on the provided mapping of CCR fields into SAP vendor master fields as well as creating/updating records in the SAP CCR tables. Design of the main program RFFMCCRVENDORCREATE01 is independent of the data source and of the method of processing the data. Default method of creating CCR records in SAP is defined by the default implementation of Enhancement Spot FMFG_CCR_VENDOR_MAINTAIN - FMFG_CCR_VENDOR_MAINTAIN_IMPL and is based on the method call to method MAINTAIN of vendor master class interface VMD_EI_API.
The data source as well as mapping from the data source to SAP CCR table fields and SAP vendor master fields is completely customizable and has to be defined in a custom implementation of Enhancement Spot FMFG_CCR_PROCESS.
We deliver two sample implementations for a CCR interface: one is based on SAP Exchange Infrastructure (XI) and one is a Point-to-Point (P2P) interface. You can define other data sources, such as a flat file or an RFC call to another system, yourself.
The XI sample solution includes XI interface with XML based mapping for Request and Response messages to and from the CCR server. The SAP CCR create/update program calls a proxy method, which is automatically generated based on the CCR XML schema used in XI, to request and receive CCR data through the XI middleware. Use of XI allows interfacing with additional systems as part of the CCR interface as well as provides extensive XML parsing, mapping, validation, and error handling features. Setting up XI based interface requires some minimal XI configuration and implementation of the XI based sample BAdI implementation CL_FMFG_CCR_PROCESS_SAMPLE for enhancement spot FMFG_CCR_PROCESS.
The P2P sample solution defines a P2P interface directly between the ERP layer and the CCR server by means of an HTTP communication protocol. This method might be more appealing to the customers who cannot use XI in their SAP landscapes. Here all XML mapping and parsing are defined in the custom implementation of the method GET_DATA.
New CCR Tables
The following new CCR tables were introduced in EhP2
●      FMCCRVENDOR_HDR (CCR Vendor Header)
●      FMCCRVENDOR_CORP (CCR Vendor Corporate Information)
●      FMCCRVENDOR_GS (CCR Vendor Goods and Services)
Table FMCCRTVENDOR is not populated by the new CCR programs.
Please reward if helpful.

Tool to create XML definition, a tool for creating XSD

I need a tool to create XML definition, a tool for creating XSD.
I was trying to do this with Oracle packages. But again there are some problems. Could you tell me which one, I should use?
Can I do it with the Oracle SQL Developer?

Hello,
i get the error message and I don't know, what I can do
The user have the permissions to use DBMS_LOB package.
Is it the sofware, do I need a license version tool for XML generation
SQL> select DBMS_XMLSCHEMA.GENERATESCHEMA( 'HR', 'EMP_DATA' )
2 from dual;
select DBMS_XMLSCHEMA.GENERATESCHEMA( 'HR', 'EMP_DATA' )
ERROR at line 1:
ORA-00904: "DBMS_XMLSCHEMA"."GENERATESCHEMA": invalid identifier

SAP XML Definitions

Similar Messages

Maybe you are looking for