Sapjup cannot find correct shares on Windows 2008 R2 cluster

Hello Guru's,
I have succesfully installed CRM 5 Abap+Java on Windows 2008 R2 based hardware. This is a HA setup.
I am now in the process of upgrading to CRM 7.01. Unfortunately, the java upgrade program SAPjup runs into an error (share
Host_A\sapmnt does not exist)  I cannot solve up to now.
This is my setup:
I have two application servers: Host_A and Host_B. Both servers form a Microsoft Failover Cluster. The shared disk for the abap and java central services is the F:\ drive, the cluster name is Cluster_X.
The Central Instance is installed on the local disk G:\ of Host_A; The Dialog instance on local disk G:\ of Host_B.
As instructed in the manual, I have moved the SAP cluster to Host_A and started the the upgrade process on G:\ drive of the same host.
During the phase PREPARE/INIT/INPUT_SAPSERVICESID_PWD_HA, the SAPjup program is trying to map the
Host_A\sapmnt share to a drive letter ('net use' command). This step results in an error.
I can explain this error since the proper share in my opinion should be
Cluster_X\sapmnt instead of
Host_A\sapmnt.
In Windows 2003 this was not a problem, because
Cluster_X\sapmnt and
Host_A\sapmnt can both be accessed and refers to the same disk location when the cluster group is active on Host_A. However, in Windows 2008 R2 this is not the case anymore and
Host_A\sapmnt is not a valid share.
Has any one of you run into this same problem or have suggestions how to solve?
Rob Veenman
SAP Technology.

I owe you an answer for the issue we had.
I opened a message with SAP, and got acklowledge that this is indeed a bug in SAPJup. SAP is working on a solution.
The work around (which was succesful) was as follows:
1. I moved the SAP Cluster group to Host_B (the DI host).
2. I created g:\sapmnt on Host_A and copied content from the shared drive
Cluster_X\sapmnt
to this local drive.
3. I shared diretory g:\sapmnt with share name sapmnt on Host_A and gave
SAP_<SID>_GlobalAdmin Read/write access.
Now SAPJup can continue. At the next interrup, you can remove the local directory g:\sapmnt and move the cluster disk back to Host_A.
I will give an update and close this thread as soon as I get a definitive solution from SAP AG for this issue.
Rob Veenman
SAP Technical Consultant.

Similar Messages

  • The system cannot find the file specified.Windows sockets error code:2.

    Hi All,
      I am on MDM 5.5 SP6.
      I am getting the following error message when trying to logging in to the DM.
    The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
    Runtime Error :
    Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
    R6025.
    -Pure virtual function call.
    And in console also the MDM server is stopped after getting the above error message.
    Can anybody tell me what could be the problem?
    Thanks & Regards
    Sireesha.

    Hi Sireesha,
    According to me, there can be 3 problems,
    1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
    2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
    3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
    Along with this, please refer to the link below :
    [[The system cannot find the file specified.Windows sockets error code:2.;]
    Hope it helps.
    Thanks and Regards
    Nitin jain

  • Hello, I am using flash CS6 on a mac. I cannot find the Motion Editor window anywhere on the flash interface. Can you help? Ben

    Hello, I am using flash CS6 on a mac. I cannot find the Motion Editor window anywhere on the flash interface. Can you help? Ben

    Here's what happens for me
    This is my AI file
    Here's the save dialog
    Notice that the All button is selected.
    Here's the PDF
    Notice the 1/5 at the top indicating a 5 page PDF.

  • I have a voice memo that is 8 minutes long which has been synked to iTunes and I want to email it to a friend. I cannot find a 'share' button or any way to email it. Cansomeone help me?

    I have a voice memo that is 8 minutes long which has been synked to iTunes and I want to email it to a friend. I cannot find a 'share' button or any way to email it. Can someone help me?

    I still have the email and the order number but they are no use to me because it is more than 180 days since I ordered this from them.
    The registration cade is contained in the email Apple sent you on purchasing.

  • Task scheduler in windows 2008 R2 cluster.

    We have clustered server and there's two nodes - Active(A1)/Active(A2).
    Ordinary client can connect A1, but A1 is failed then connect A2 by windows 2008 R2 cluster.
    We have a task scheduler exe module created by .net framework in each node.
    When A1 server is operated, we wanna just A1 job scheduler active.
    And A2 server is operated, just only A2 job scheduler acitve.
    Can We contoller  this situation in exe module or Failover Cluster Manager?
    parky

    If you upgrade to Win2012 or higher you can.  Here's a blog on it:
    http://blogs.msdn.com/b/clustering/archive/2012/05/31/10312527.aspx
    Thanks!
    Elden

  • Is there any way to enable eventlog replication between two nodes in windows 2008 failover cluster.

    Is there any way to enable eventlog replication between two nodes in windows 2008 failover cluster.
    Thanks Azam When you see answers please Mark as Answer if Helpful..vote as helpful.

    Hi,
    As far as I know there don’t have the log replica function between failover cluster node, if you want to have the Unified log management you can refer the following related
    KB:
    Configure Computers to Forward and Collect Events
    http://technet.microsoft.com/en-us/library/cc748890.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows 2008 Failover Cluster - Cannot add a generic service

    Trying to add a generic service in a failover cluster.
    Select the option Services and Application and it opens the wizard and then displays the error "An error was encountered while loading the list of services. QueryServiceConfig failed. The system cannot find the file specified"
    The cluster validation wizard completes successfully. Permissions do not appear to be an issue as this account can seemly do everything else so I am at a loss to understand why this API is failing when it tries to query the server for services information.
    Having searched the Internet the only thing I have found was someone posting a similar issue in the Greek language Technet forum(if I recall correctly) and their comment was they rebuild their cluster.
    Windows 2008 (SP2) x64 two node cluster running a non-Microsoft database. We need to add a non-Microsoft Enterpirse backup solution and this is their documented method (adding it as a generic service) - both bits of software are from big vendors.
    Symantec AV, but have tried with that disabled so don't think it has anything to do with that. Something is stopping the API from reporting back but I can't find what.
    Really appreciate some help before we have to log a chargable call with Microsoft support
    Thank you

    Hi,
    Have you tried the suggestion? I want to see if the information provided was helpful. Your feedback is
    very useful for the further research. Please feel free to let me know if you have addition questions.
    Best regards,
    Vincent Hu

  • FIrewall for Windows File Share for windows 2008

    Hi All,
    Recently we upgraded one of our application file server from Windows 2000 to Windows 2008. We use this server for file sharing. We used to read files and write files to this server. Post upgrade one week every thing went fine all of a sudden we started seeing
    issues like the application servers stopped communicated to this server. 
    We worked with our firewall team and enabled port 445 post this the application servers started communicating to the file server. Our Application servers are on Windows 2003 server.
    Can someone please help me understand what is the port that needs to be enabled for accessing the file shares. My firewall team confirmed there were no firewalls rules between the Application server and File server. 

    Hi,
    Based on my research, firewall ports required for SMB file sharing are port 445 and 139.
    More information for you:
    SMB: File and printer sharing ports should be open
    https://technet.microsoft.com/en-us/library/ff633412(v=ws.10).aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Cannot find Iphone icon in Windows 8/my PC.

    How do I transfer video's? I  cannot find the iPhone icon in Windows 8/ My PC.

    The following link has a section for Windows 8 and describes 2 methods of transferring photos and videos: iOS: Import personal photos and videos from iOS devices to your computer

  • Auditing file share on windows 2008 R2

    I think I may need a little handholding here. I have been working with our new Windows 2008 R2 file server. I am having a problem doing some simple file level auditing.
    I turned on Audit Object Access in the local policy. The GPO that applies to this server does not have it set and I only really need it enabled on this server. I have it auditing success and Failure.
    After I did that I got deluged with Event ID: 5145. I went to each folder and made sure that I had auditing turned off for each folder and file. I did that to see if it would quite down the logs a little. It did not. I am currently getting about 1500 events of 5145 every second. They all say “ A network share object was checked to see whether client can be granted desired access”
    Most of the details look like this:
    - System
      - Provider
       [ Name]  Microsoft-Windows-Security-Auditing
       [ Guid]  {54849625-5478-4994-A5BA-3E3B0328C30D}
       EventID 5145
    Version 0
    Level 0
       Task 12811
       Opcode 0
       Keywords 0x8020000000000000
      - TimeCreated
      [ SystemTime]  2009-10-21T17:27:06.988998000Z
       EventRecordID 4035441
       Correlation
      - Execution
      [ ProcessID]  528
      [ ThreadID]  544
       Channel Security
       Computer XXXXX-File.XXXXX.com
       Security
    - EventData
      SubjectUserSid S-1-5-21-619530815-2141852887-1629300891-2071
      SubjectUserName SteveW
      SubjectDomainName XXXXXXXXXX
      SubjectLogonId 0x223b087c
      ObjectType File
      IpAddress 10.2.50.88
      IpPort 1087
      ShareName \\*\users
      ShareLocalPath \??\E:\shares\users
      RelativeTargetName \
      AccessMask 0x1
      AccessList %%4416 
      AccessReason %%4416: %%1801 D:(A;OICI;FA;;;WD) 
    All I am trying to keep track of at this point is logon and logoff events AND files and folders being deleted.
    If I have put this into the wrong folder please let me know.

    Hi all,
    I enabled File System Audit and NFTS audit only "Delete subfolders and files"
    auditpol /get /category:"Object Access"
    System audit policy
    Category/Subcategory                      Setting
    Object Access
      File System                             Success and Failure
      Registry                                No Auditing
      Kernel Object                           No Auditing
      SAM                                     No Auditing
      Certification Services                  No Auditing
      Application Generated                   No Auditing
      Handle Manipulation                     No Auditing
      File Share                              No Auditing
      Filtering Platform Packet Drop          No Auditing
      Filtering Platform Connection           No Auditing
      Other Object Access Events              No Auditing
      Detailed File Share                     No Auditing
    I try to delete files but don't see any 4463 event.

  • TS1538 cannot find my ipod in windows 7

    cannot find my ipod touch in windows 7

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    Next
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Mount NAS Share in Windows 2008 R2 using CIFS

    Hi All,
    We have a requirement to setup NAS file share mounted to Windows 2008 R2 server using CIFS. This share needs to be visible for all users who logged in to the server and should be a permanent share. I have gone through the below link on the steps to connect
    NAS share using Windows NFS client.
    http://randypaulo.wordpress.com/2012/06/29/nfs-how-to-connect-to-nfs-using-windows-server-2008-r2-without-using-user-mapping-server/
    As per the above link we will need to mount the NAS share using a Unix User ID and Group ID. But in our environment its not possible and we have to use Windows Active directory user account and group name. Due to this reason why we want the CIFS to be placed.
    So if anyone has got different opinions please share with us. Also please let us know if anyone has got any idea how to do this setup.
    Your help will be highly appreciated.
    Regards,
    Kiran Francis

    Hi,
    Do you mean that the NFS share is stored on a Windows-Based computer and you want Authenticated users access the NFS share?
    Please refer to the article below to use command line to mount NFS share:
    Mounting an NFS shared resource to a drive letter
    http://technet.microsoft.com/en-us/library/cc754350.aspx
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cannot find Safari bookmarks in Windows Vista folders.

    Where are safari 5.1.7 bookmarks stored in Windows Vista? (A search of ALL folders cannot locate "Bookmarks.plist" in Windows Explorer).

    It's inside folders that are hidden by default on Windows. Adjust your View options to Show Hidden files and folders prior to doing the search.

  • Cannot find Bootcamp tool in Windows 7 on Mac

    Hi there,
    I've just completed the download of Windows 7 on Mac (not online download, I have a DVD). 
    However, I cannot locate bootcamp tool in windows and that makes me unable to use Wifi and lots of function in Windows 7 OS
    I tried to plug in my USB with the bootcamp tool installed earlier during the beginning of the download but it did not show up.
    Please help me thankssss

    you need to install the apple hardware drivers for windows
    Apple - Support - Downloads

  • Add additional IP to Windows 2008 SP2 Cluster

    Dears,
    I have a 2 node SQL 2008 Cluster 64bit (non r2) on Windows 2008 SP2 64bit (non r2) Server.
    I need to add additional IP (different subnet) to the Cluster Quorum Resource. 
    Kindly guide me the steps to add the IP ?
    Thanks
    Tariq

    HI Tim,
    Well we need more than one IP address on the Cluster (Quorum) for our replication to work as for some reason we cannot use the production IP which is currently configured for this Cluster.
    Further if you are doing multi-site cluster with different subnet then you may need two IP with different subnet on the cluster (not for services or application)
    I found this usefull command and it worked on the win 2008 sp2 (non r2) server:
    C:\>cluster . res "FS IP Address" /create /group:"file server" /type:"IP Address" /priv address=192.168.1.106 subnetmask=255.255.255.0
    For win 2008 r2 servers there is powershell command through which we can achieve the same.. :)
    it took me hard time to figure out that "failoverclusters" module will not work for win2008 SP2 server.. !! 
    Thanks

Maybe you are looking for

  • Bank Reports

    Hi Experts, i want a report of banks when i choose a bank the following fields should come 'Posting Date', 'JE Transaction No', 'Payment Transaction No', 'BP Account ', 'BP Name ', 'Credit/ Debit Amount', Cumulative balance'. Please write the queery.

  • How to use a SELECT QUERY using fdmAPI.executeDML in FDMEE Jython Script?

    Hi, Just the way we use DELETE and INSERT Statement using fdmAPI.executeDML, is there any way of executing a SELECT Statement and get the output in variables? I would like to refrain from using import java.sql and enter the connection details in a sc

  • Cancellation of RETURN delivery made by Quality

    Hi All, I want to cancel the return delivery made to a vendor. It was posted in QA11(usage decision) in Quality Mgmt. In MBST, the system doesnot allow to cancel the document. How should i proceed ? pl give me a direction. regards gnk Edited by: gnk

  • ROUTINE CODE HELP

    HI FRIENDS, I WANT CREATE A START ROUTINE IN UPDATE RULES TO FILTER OUT TWO FIELDS WITH A SELECTION : MY TWO FIELDS ARE      Yacc_SEQ  = ´ZROO´ .         0PRICE_LIST = ´  ´ . (EMPTY) AND I WANT TO DERIVE 3 FIELDS LIKE 0CUSTOMER, 0SALESORG, YLEG_ENTIT

  • Print Logo on PO Sapscript for specific Pur Org.

    Hello Experts, Business has a requirement to print our company Logo on PO Sapscript for certain Purchasing Orgnizations. We have a Z version of MEDRUCK. Honestly, I have never worked on Sapscripts before. When I looked at the Print Program it has the