Saposs connection failed while connecting to sap?
Hi ,
I have successfully configured sap router. These are the results afer starting saprouter
lsof -w -n -i tcp:3299*
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
saprouter 9873 s1dadm 4u IPv4 5333574 0t0 TCP *:pdrncs (LISTEN)
#sapgenpse get_my_name -v -n Issuer
Opening PSE "/home/s1dadm/sec/local.pse"...
PSE (v2) open ok.
Retrieving my certificate... ok.
Getting requested information... ok.
SSO for USER "s1dadm"
with PSE file "/home/s1dadm/sec/local.pse"
Issuer : CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
While testing sap oss connection i am getting error.
What are the configuration i have to do?
Regards
Srikanth
Hi,
Below are the details of saprouttab
SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local system for R/3-Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" < server ip > 32<sid>
Access from your local Network to SAP
P <server ip > 194.39.131.34 3299
All other connections will be denied
#D * * *
So where should i maintain all changes?
Regards
Srikanth
Similar Messages
-
BT connection fail while connecting to Pc
Hi fren,
i hv nokia 6275 handset and haveing Reliance connection as operator.whrn my phone its new its working fine..and i am useing the same as a modem my connectivity via bluetooth..its working nicely 2-3 month after some time i am nt able to user my phone as a modem.and suddenly last 1 month i am faceing problem while i am connect my phone with pc the error showing line bluetooth connection fail some thing like that..and its comes again n again.as per nokia care need to update my handset @ nokia care..but i dont think so.its ture for my handset..its working and suddenly problem pop-up..and way main thing is solluction pls tell me idea to reslove this problem...waiting for your reply...store.connect(host, username, password);
if i use the above... i am getting the following exception
Properties Initialized
Session Initialized
DEBUG: setDebug: JavaMail version 1.4ea
Inside of Try Block
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.fetchsize: 16384
After IMAP
Here is the result ----> :false
Before connect
exception while connecting : javax.mail.MessagingException;
nested exception is:
java.io.IOException
javax.mail.MessagingException;
nested exception is:
java.io.IOException
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:479)
at javax.mail.Service.connect(Service.java:275)
at javax.mail.Service.connect(Service.java:156)
at com.openstream.emailgateway.sources.check_imap.main(check_imap.java:60)
Caused by: java.io.IOException
at com.sun.mail.iap.ResponseInputStream.read0(ResponseInputStream.java:99)
at com.sun.mail.iap.ResponseInputStream.readResponse(ResponseInputStream.java:67)
at com.sun.mail.iap.Response.<init>(Response.java:83)
at com.sun.mail.imap.protocol.IMAPResponse.<init>(IMAPResponse.java:48)
at com.sun.mail.imap.protocol.IMAPResponse.readResponse(IMAPResponse.java:122)
at com.sun.mail.imap.protocol.IMAPProtocol.readResponse(IMAPProtocol.java:230)
at com.sun.mail.iap.Protocol.<init>(Protocol.java:91)
at com.sun.mail.imap.protocol.IMAPProtocol.<init>(IMAPProtocol.java:87)
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:446)
... 3 more
java.lang.IllegalStateException: Not connected
at com.sun.mail.imap.IMAPStore.checkConnected(IMAPStore.java:1364)
at com.sun.mail.imap.IMAPStore.getFolder(IMAPStore.java:1201) -
"Sync encountered an error while connecting: Failed to connect to the server. Please try again."
"Sync encountered an error while connecting: Failed to connect to the server. Please try again." message has appeared on both my desktop (OS 10.6.8, FF 6.0.2) and laptop (same).
This error is not covered in your help documentation.
I have an active internet connection.
I have tried resetting the Sync on the laptop several times over the last few weeks.
Please advise.
ThanksHi!
It seems that you are not using the latest version of Firefox. Please, update and try again: http://www.mozilla.org/firefox -
I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English
Hi,
Sometimes the server is not available and you can get an error like this one. Usually it works if you try to sync later. If this doesn't work, take a look to [https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/ this post] to learn how to report a bug.
Let me know if this is helpful. -
Sync encountered an error while connecting.Failed to connect to server.
Cannot connect to server. "Sync encountered an error while connecting: Failed to connect to the server."
Help!
This happened yesterday 1/20 after my daughter was in her e-mail account. Had trouble with the screen also.I started having this problem after the download of the new Firefox 5.0. No solutions posted have worked so far. FIPS is already disabled.
-
My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6) addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18 addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6) addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
C7-00 problem -"Connection failed. Connection unav...
Hi, after updating from Anna to Belle some widgets like RSS are stoped working. Today I updated Belle to the latest version and the problem is the same: When I add RSS widget to some screen recieve the message: "Connection failed. Connection unavailable." Could anyone help me, please?
Same here. I notice this "pop up" message quite often. The latest example was Social Network Update, after which it just won't connect to Nokia Social... I still haven't figured out why
-
TDS Addon,XL Reporter addon installation failed while connecting Citrix
Hai!
I am using SAP B1 PL 42
I have installed, MS sql Client,SAP B1 client and Addons in my citrix
server.
It's installed successfully and i able to log in,Connect TDS,XLR
Addons.
I publieshed SAP B1 in citrix.While i log in through citrix.
TDS Addon and XL-reporter addon's are showing error and failed to
connect.
Error Msg screen shot is attahched in the SAP B1 Support Message.
Message No: 922695
[https://websmp102.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000610167&_SCENARIO=01100035870000000183&_ADDINC=&]
Pl help me out in this issue.
Note:i log SAP with same user name
Thank you.
K.Thanga Raj
09710445987Hi,
I cant view the link of the error. are you running citrix remotely or from the box? are all components installed for TDS and XLR?
Please refer to the link also :
Refer this link
ftp://ftp.citixsys.net/
user name: national
password: national
Regards,
Clint
Edited by: clint pow on Nov 11, 2008 8:06 AM -
"Connect failed" while trying to transport
I am trying to implement a SAP Note and there it was necessary to import some transport request. I was able to add the request to the STMS-transaction, but I am unable to transport it. Every time I try I am getting the same error: "Connect failed". I checked the environment variables of the user, but these seem to be right set. But if I am looking to the trace file it seems that there is a problem with some user.
Is there in anyone that has a solution for this?
This is tp version 320.56.89 (release 620)
ERROR: Connect to DEV failed (20060801114224, probably wrong environment).
TRACE-INFO: 1: [dev trc ,00000] Tue Aug 01 11:42:23 2006 2577 0.002577
TRACE-INFO: 2: [dev trc ,00000] load shared library (dbmssslib.dll), hdl 0 27 0.002604
TRACE-INFO: 3: [dev trc ,00000] using "D:usrsapDEVSYSexerundbmssslib.dll" 32 0.002636
TRACE-INFO: 4: [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'dev' setuser 'dev']
TRACE-INFO: 5: 46056 0.048692
TRACE-INFO: 6: [dev trc ,00000] ExecuteAndFlush: line 36739. hr: 0x80040e14 There is no such user or group 'dev'.
TRACE-INFO: 7: 88 0.048780
TRACE-INFO: 8: [dev trc ,00000] HandleOledbError [ExecuteAndFlush,line 36739]: Error/Message: (err 4604, sev 0), There is no
such user or group 'dev'.
TRACE-INFO: 9: 97 0.048877
TRACE-INFO: 10: [dev trc ,00000] setuser 'dev' failed -- connect terminated 56 0.048933
TRACE-INFO: 11: [dev trc ,00000] Tue Aug 01 11:42:24 2006 22901 0.071834
TRACE-INFO: 12: [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'dev' setuser 'dev']
TRACE-INFO: 13: 33 0.071867
TRACE-INFO: 14: [dev trc ,00000] ExecuteAndFlush: line 36739. hr: 0x80040e14 There is no such user or group 'dev'.
TRACE-INFO: 15: 62 0.071929
TRACE-INFO: 16: [dev trc ,00000] HandleOledbError [ExecuteAndFlush,line 36739]: Error/Message: (err 4604, sev 0), There is no
such user or group 'dev'.
TRACE-INFO: 17: 76 0.072005
TRACE-INFO: 18: [dev trc ,00000] setuser 'dev' failed -- connect terminated 42 0.072047
TRACE-INFO: 19: [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'dev' setuser 'dev']
TRACE-INFO: 20: 15108 0.087155
TRACE-INFO: 21: [dev trc ,00000] ExecuteAndFlush: line 36739. hr: 0x80040e14 There is no such user or group 'dev'.
TRACE-INFO: 22: 68 0.087223
TRACE-INFO: 23: [dev trc ,00000] HandleOledbError [ExecuteAndFlush,line 36739]: Error/Message: (err 4604, sev 0), There is no
such user or group 'dev'.
TRACE-INFO: 24: 79 0.087302
TRACE-INFO: 25: [dev trc ,00000] setuser 'dev' failed -- connect terminated 43 0.087345
TRACE-INFO: 26: [dev trc ,00000] failed to establish conn. 0 5407 0.092752
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
Output from tools called by tp:
Thanks in advance!Remove existing backup destinations before you "add" a new destination.
OR
BACKUP DATABASE dbname TO DISK ='c:\dbname.bak'
---Prashanth -
Connection Failed While Importing Metadata
Hi All,
I have installed 11.1.1.6.2 Client on my machine and while i am trying to import metadata it throws an error saying "Connection Failed". Can some one help me how to resolve this ?
Regards,
Vishal BVRI did google it but all the responses were related to the Server versions but not client, none of them answered my question. And coming to your suggestion do you mean that we need to provide full TNS entry i.e.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.us.deloitte.com)
or do you want me to mention just ORCL in the DSN name during the import metadata step from the RPD. -
OS X 10.8.4 wifi says "connection failed", but connects anyway; cannot save password
I am using OS X 10.8.4 that came with my MBP. When I connect to my home wifi that requires a WPA 2 password, it says "Connection Failed", but anyway connects to the internet. Also, my password is not being saved, and I need to enter it everytime.
After reading several forums, I have already tried the following:
1. removing airport preference list from Library/Preferences/SystemConfiguration
2. Removing network password from the keychain
3. Using Keychain first aid
4. Using disk utility and doing repair disk.
5. Doing DHCP release in Network Preferences.
6. Removing my network from the preferred network list and connecting again.
I am using a D-link modem. It should not be a problem, because the same MBP could remember the password before. The problem happened when I tried to fix my wifi because it would take long to connect after waking from sleep, when I deleted the airport preferences list, and removed the keyring.Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
I bought a camera connection kit but fail to connect to my iPad . My iPad prompt me that my attached device using too much power ! I got no problem using the SD connecting kit. My camera is Samsung EX1 , pls advise
Do your cameras support Picture Transfer Protocol (PTP) and/or USB Mass Storage Device Protocol (http://support.apple.com/kb/HT4106), and if so do you need to change a camera menu setting in order to enable it ?
-
Airport Extreme causing "Connection Failed" to connected disk
I have a relatively new Airport Extreme, with a MyBook 500GB external hard drive connected to it. There are 2 Macs (a MBP and Mac Mini) that backup to that hard drive wirelessly with Time Machine. Both Macs have no problem connecting to the disk drive for a couple of days or so, and then all of a sudden, Time Machine reports an error, and when trying to open the drive in Finder, I get the error message "Connection Failed". Every time this happens, I can fix it by unplugging the drive from the Airport Extreme, and plugging it back in. That will usually make it work for a couple of days, but sometimes less time than that.
I can't see it being a formatting issue with the disk, or any kind of connection issue, since it does work for a period of time. But why is does it suddenly stop working for both Macs?Welcome to the discussions!
Your drive is formatted correctly if you have been able to make Time Machine backups.
Part of the problem may be that Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme. That doesn't mean it won't work...it's just that Apple will not provide any help when difficulties arise with this configuration.
Some users report that this works well for them and others report intermittent to constant problems.
You might try using Disk Utility to check and repair permissions on your computers that are backing up to the Time Capsule.
Hard Drive > Applications > Utilities > Disk Utility
Click the disk on the left that exactly matches the name of the hard drive on your desktop. If you have not renamed it, it will be Macintosh HD.
Click Repair Permissions. This will take 30-60 minutes on average. -
Can't get to Time capsule back-ups -- Connection Failed and "Connect As" does nothing
I had to replace my hard drive. I am trying to access the Time Machine back-ups. I can see the back-up volume in the Finder under the "Shared" category, but when I try to connect to the back-up volume, I immediately get "Connection Failed" and the "connect as" button does nothing when I click on it.
Do I have to re-start backups before I can get into the old back-ups?? Any advice on how to get "Connect As" to let me connect?
Thank you.EXACTLY the same problem..
10.5.6 iMac -
Prior to problem: All 5 devices (iMac, Mac Air, iPad and (2) iPhone 4) were surfing wirelessly on Airport express.
Replaced AE with Time Capsule.
Problem: Wife's iPhone could not connect to T.C. Other 4 devices connect without problem. Wife's iPhone can surf other wireless networks. After doing a total shut down of all devices and restart of each, starting with 3rd party router, then T.C., then each device one at a time... wife's iPhone can connect, but Mac Air can not. Observed that in each case, the one that can't connect is the last one to be restarted and attempt to connect. Did this a 3rd time. I chose my iPhone to be the last to try to connect . My iPhone can't connect but all other devices are connected. Every case: last to connect can't connect.
Steps taken before realizing it was the "last device to try connecting" (back when I thought it was simply my wife's iPhone): Wifi Off/On. "Forget Network." Reset Network Settings. Power iPhone Off/On. Power T.C. Off/On. Turned T.C. wireless security Off/On. All these were done multiple times.
It appears there is no hardware issue since all are capable of connecting to T.C., just not at the same time. I don't know much about protocols and addresses. Could it be that T.C. is fouling up the assignment of an address or channel or route or whatever to the 5th device that tries to connect? Is the 5th device left without a address, channel or route to the T.C.?
My security is WPA2 Personal. It's on. The password is alphanumeric 9 characters. On my iPhone that can't connect, the satus wheel is spinning continuously beside my network's name. Tapping the blue arrow for more info shows the window that has "Forget this network" at the top, followed by DHCP, BootP and Static. DHCP is selected. The following fields are listed: IP Address, Subnet Mask, Router, DNS, Search Domain and Client ID. Most times, all of these fields are blank. Right now, the first two fields are filled in. IP address starts with 169 and subnet mask is 255.255.0.0
Please help.Right now, the first two fields are filled in. IP address starts with 169 and subnet mask is 255.255.0.0
That is auto IP and means the device was not able to pick up an IP from the dhcp server.
I am scratching my head.. it is not one I have seen with Mac stuff or on these columns since I started answering questions.. it is seen in mixed environments fairly often that stuff doesn't play nice with each other. But Mac - Apple has shown fairly consistent wireless functionality.
Is the TC brand new? Did you ring Apple and ask if they can sort it?
When you are using 100% apple environment, to me that is their job to figure out.
For what you can do, I would try and flash the TC back to 7.5.2 firmware. I have heard people say the latest TC that is not allowed but have a go.. if you run Lion certainly download and use exclusively 5.6 airport utility.
Is the TC set to router or bridge? Is the TC the only router?
Could you bypass at least the issue for now using the airport express plugged into the TC as an AP??
Maybe you are looking for
-
Hi, Currently we are implementing crm & adobe interactive form integration scenario. What we are expecting; when user presses submit via e-mail button on the form, the xml file which is attached to e-mail has to be processed by CRM. We have read pre
-
Best File Format For Online Line Art?
I thought the conventional wisdom was that all line art for the screen should be saved as GIFs, all photographic line art should be saved as JPEGs. Then PNGs came along and offered an alternative to GIFs. I've been exploring this because I've been ha
-
Hi, I'm trying to use Gmail to retrive my mail form Icloud, I use a mac at home and a pc at work and an android device on the road, I have tried setting gmail the way I sign on with Chrome but I keep getting errors... what do I have to do differentl
-
Web Services and NosuchMethod Error
A brief rundown of my problem : I'm working with a java portlet and a webservice. I have set up the webservice to the point where I see it in the server window and I can test the methods. The specific method I'm having a problem with works correctly
-
Where are my PAGES docs backed up?
How and where do i look for my backed up docs?