Satellite M70: Battery doesn't work anymore

The battery of my brand new satellite M70 doesn't work anymore. I didn't use the portable for about a week and when I tried to start it (from battery), it didn't do anything. The battery was still loaded (63%) I have to connect the AC adapter to the power supply to make it work.
Meanwhile the battery LED is always orange. The battery doesn't load, battery power remains 63%. I tried to remove the battery for a while and put it back in, but this didn't change anything...
How can I solve this problem?

Hi
Possibly the battery has a malfunction. It would be very interesting to know if this issue happens after battery replacing.
According to your posting the warranty should be valid the battery replacement should be done for free.
I recommend contacting the Toshiba service partner in your country and ask the guys for the help.

Similar Messages

  • Satellite M70 - WinDVD doesn't work anymore

    WinDVD doesn't work anymore. Although my CD/DVD-RAM is functionable and the Windows Explorer shows all files in the CD drive, WinDVD cannot find them.
    If I try to watch a video with Real Player, I can at least hear something, but there are no pictures. Is there something wrong with my video card ?
    How can I fix that ?

    In my opinion you should test video play with VLC Player. It is free and you can download it under http://vlc-media-player.en.softonic.com/
    This player opens every video format and you must not install some additional codecs. I use it for the long time and I am happy with it.
    Please test it and post the result.

  • Battery doesn't work anymore

    I bought a mac on 2011 and it was working wonderfully but since September there was an accident in my house (we're under makeover, so while the constructers were setting up the rooftop it started rain and the water got into our house and unfortunately my macbook was affected) and the battery of my mac doesn't work anymore. I can only use it when it's with the force power and I would like to know if there's a way to recover it on USA or find a way to rapair it.

    I think it's a dead battery and that you probably wouldn't be able to fix him so, or buy a new macbook or always keep the plug into it

  • Satellite M70 - battery cannot be charged anymore

    Hello!
    I have an M70 which is 14 month old and I have a problem with it: the battery cannot be charged anymore! The computer and the battery are in a very good shape, and 2 days ago the battery worked just fine (it is an original 4000 Mah battery and it had a life between 2 and 3 hours). Now, the computer doesn't start unless it is plugged and it permanently shows the battery 1% charged. The notebook doesn't suffer any phisical damage.
    What is weird is that when I am plugging the power, the battery seems to be charging - the charging led is on between 5 and 10 seconds, and then it shuts off!
    When it is plugged, the notebook works fine.
    The questions are:
    1) can it be a software issue, or maybe a virus?
    2) how can I find out if the battery is damaged or the problem is with the notebook and it cannot charge the batteries anymore.
    The warranty expired and the company from where I bought it refused to have a look at it.
    Thank you,
    Eugen

    > can it be a software issue, or maybe a virus?
    No, I dont think so!
    >How can I find out if the battery is damaged or the problem is with the notebook and it cannot charge the batteries anymore?
    This is not possible for the common user which doesnt have any experience and special tools.
    I think you have to contact the ASP in your country for an check.
    You will have to pay for this because the warranty expired and I really dont see any other possibilities.

  • The charger port on my Toshiba Satellite C55D-A5208 doesn't work anymore?

    I have a Toshiba Satellite C55D-A5208 laptop, and when I tried to plug in my regular charger into my laptop, the place where I plug my charger into the charging place on laptop got pushed in further into my laptop and now my charger can't reach the charging place of my laptop, and I'm not sure what to do. I'm not really a tech or mechanical professional but is there anyway to fix this, so I can charge my laptop again? It's because I really don't want to have to go to a repair shop and pay $200 or more dollars if I can just fix it on my own. And, I also thought that since my laptop has a USB port it, is there a laptop charger adapters out there? Would that be a better option to charge my laptop since the charging place on my laptop got pushed further into my computer? Thank you.

    Thanks for your hint, but I tried to roll back windows to a status before the updates. However, during this process I got error 0x80070005.
    I repeated the process with :
    - Internet disconnected
    - without the Internet security package Kaspersky active
    My laptop was pre-installed with windows 8.1 and is not connected to other workstations.
    Can you give me another hint please ?
    Message was edited by: hsslb
    Additional information :
    The left/right buttons work fine, but when i move with my finger over the touchpad it acts like the up and down arrows.
    Moving left or right doesn't do anything.
    Disabling the touchpad with F5 also works fine

  • Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps wit

    Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps with ios7

    Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past.  With the new operating system you also swipe downward to get the search bar to find an app

  • Touch Pad of Satellite P50-A-M13 doesn't work anymore - Solution

    Hello *,
    before someone should have the same problem, I wanted to share my problem and my solution here:
    Information about my system:
    I have installed Windows 8.1 Professional and Scientific Linux 6.5 in Dual Boot on my Toshiba Satellite P50-A-M13.
    _*Problem:*_
    The Touch Pad suddenly doesn't work below Windows 8.1 Professional anymore, the mouse pointer vanishes after a reboot. You can't deactivate/activate the Touch Pad with the F5 key (without pressing the FN-button) anymore. The white LED of the Touch Pad doesn't work anymore. Another operating system (in my case: Scientific Linux) in Dual Boot doesn't recognize the Touch Pad anymore after a reboot, too. So it isn't working below the other operating system anymore, too. It looks like a hardware defect since it affects more than one operating system.
    _*Additional information:*_
    If you attach an external USB mouse to your Toshiba notebook, the Touch Pad will work again, you can activate/deactivate the Touch Pad via the F5 key (without pressing the FN-button) below Windows 8.1 again, but the white LED of the Touch Pad still doesn't work and doesn't turn off or on. Same below another operating system in Dual Boot. The BIOS doesn't offer a feature that you can activate or deactivate the Touch Pad there.
    Reason:
    I had the problem that the feature "automatic driver installation" below Windows 8.1 Professional was activated. The driver for the Synaptic Touch Pad got replaced by a Microsoft driver in the background automatically.
    _*Solution:*_
    _Keep the external USB mouse attached and start Windows 8.1 if it isn't started already. Then deactivate feature "automatic driver installation" below Windows 8.1. Then reinstall the Synaptic Touch Pad driver from the download page of Toshiba website again. Then reboot Windows. The Touch Pad should work then again. And never, never activate the feature "automatic driver installation" below Windows 8.1 again!_
    Many thanks, Jana

    Thanks Jana for this post!
    I also noticed that sometimes Windows updates could break the driver functionality...

  • After installing iOS 6 update my ipod touch 5G doesn't work anymore

    after installing iOS 6 update my ipod touch 5G doesn't work anymore. Can anybody help me? Please!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My Ipod touch 2nd gen. was working fine but when I tried to charge from my PC the Ipod start getting too hot and the screen turn black and doesn't  work anymore.Maybe is burn?

    My Ipod touch 2nd generation was working fine until I tried to charge again from my PC,when I connected the Ipod was getting too hot and smelling like burn cable,the screen turn black and doesn't work anymore. any ideas about what happen?

    You can try here:
    iPod touch: Hardware troubleshooting
    However, from your discription, I suspect that something is broken.  Maybe a dead battery.  In that case. I would make an appointment at the Genius Bar of an Apple store and see what they say.

  • Clicking doesn't work anymore

    I have a 15" MacBook Pro dating from mid 2009. Since the update to Mavericks clicking doesn’t work anymore, at least not properly. Sometimes it doesn’t work at all, sometimes I have to use right-click instead of left-click. Repairing access rights (hope this is the correct translation from German "Zugriffsrechte") helped only partially. Any incompatabilities known in this respect? Or any other suggestions?
    Thanks!
    t.

    Hi and welcome to the BlackBerry Forums
    Try restarting the device, with the phone turn on take out the battery for 30 seconds and install the battery again, let me know please, thanks. 
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • TS4268 iMessage doesn't work anymore suddenly. It claims that my apple id had changed, which isn't the case (App Download still working!) . Then it shows the correct Email-adress and asks for appleID password.

    iMessage doesn't work anymore suddenly. It claims that my apple id had changed, which isn't the case (App Download still working!) . Then it shows the correct Email-adress and asks for appleID password. After entering it switches to a mask witch asks for the eMail adress that should be used. There is the right One already preentered. From there it switches back to the former mask (appleID +password) and nothing happens. If you say Log in again, ist just switches between those masks without showing an error claim nor logging in. Strange thing is ist worked proppperply till a few days ago.......

    Hello there Noregret35,
    I suggest this part of the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/#section_1
    If you get to step 3 I recommend closing ALL the apps.
    Here is step 1 to get you started.
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    Regards,
    Sterling

  • Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    TarahCurrie Sep 10, 2014 3:48 PM
    Restore From Time Machine Backup
    Reinstall OS X
    Get Help Online
    Disk Utility
    MacBook Pro, Mac OS X (10.5.8)
    You are running 10.5.8
    Did you try booting off your Install disk holding the c key down.  From here you can get to the drop down menu just a few clicks in (you are not going to install) and run  the Disk Utility>Repair Disk.  See if it will let you do this.

  • Efi Express doesn't work anymore so I can't print

    I Use Efi Express as RIP and colormanagement software to print to my Epson Pro 4900 printer. Now I need prints and this doesn't work anymore.
    I installed Maverick so that is most likely to be the problem, because just before I did this the pritner and software worked fine. I installed Efi Express again but I keep getting a message aboutr a system extension that isn't properly installed.
    I looked in the system folder for this .kext file, but it doesn't exist at all.
    Please help.

    We use the Fiery Express driver with our Canon copiers that use the optional EFI print controller and have no issue with this driver on 10.9. In fact, at this point in time, it is the only EFI driver we have for 10.9.
    The Express driver plugins should be located in /Library/Printers/efi and the PPD will be in /Library/Printers/PPDs/Contents/Resources/en.lproj and is called Fiery Express. So trash these files and check the EFI web site for the latest version of the driver.

  • I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.  I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

    I can't seem to get my iMac (late 2009 model) into automatic sleep mode.  If I manually put it into sleep I don't have any issues.
    I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
    I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
    Is there anyone who can give me some pointers ?

    Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
    For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
    To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
    At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
    Good luck!

  • Su doesn't work anymore but sudo works

    Hi all,
    I normally use my standard user account but when I'm installing with macports I routinely "su" into root to do things.
    Today I went on my machine and noticed that "su" wouldn't work. Before anyone decides to tell me that I don't need to use "su", I realize that but I use it for my own purposes.
    From the system log I am seeing this each time "su" fails:
    su[1376]: pam_authenticate: Permission denied
    What is interesting is that doing a "sudo su" works, and I'm able to do all of my admin duties that way.
    I have a feeling something messed up my bash profile but not totally sure. Has anyone else run into this issue?

    Hi all,
    Thanks for the help on this issue.
    I'll clarify: I'm using this install as a server and this is why I have 2 admin accounts on it. The original account is my own; the one I created when I first installed OS X. I then enabled System Admin (root) so that is the other admin account. After installing MacPorts I have been running the system as a multi-user webserver. I occasionally log in as root to do maintenance and upgrades. I have found that it's easier to use the SysAdmin account in certain situations because of permissions issues and ease of installing upgrades.
    I'll often log in under my username and then su to root. Recently (yesterday) I noticed that "su" didn't work anymore when I used my normal username.
    There are sometimes that I will log onto the machine as System Admin and usually via the terminal (console) I can log in as any of the other accounts by doing
    su <username>
    this also doesn't work anymore. I get the error:
    shell-init: error retrieving current directory: getcwd: cannot access parent directories: Permission denied
    I have two servers set up this way. One works the way it should, the other one has this problem. The only difference I can see is in roots bash profile but I'm not sure why they are different on each machine.
    Also when logged in as System Admin, I should be able to turn off "allow user to administer computer" on my regular account but it's grayed out. On the other similarly configured machine, under the same conditions, I can. I'm not sure why I can do it on one and not the other.
    I've tried turning off enable root via Directory Utility but that didn't fix the issue.

Maybe you are looking for

  • Multivalue# Error in the count value

    Hi, Please help me on this. I am getting Multivalue# Error in the code below. =If (Count([Subclass ID]) <=5;"Subclass: " + [Subclass ID]; " No of Subclass Selected: " + Count(Subclass ID)) Thanks you in advance. Rose

  • Removing non-printable characters

    Hi All, I was suppose to remove all non-printable characters, hence created below function. But in trouble for some rows in table. function ar1(i_value in varchar2) return varchar2 as        pattern varchar2(1000) := '][';        l_strVal varchar2(10

  • So what exactly do u do with a mac mini?

    Hey All, So, what exactly are you supposed to do with a mac mini ? Im pretty much of a straight up PC guy (although that may change as I played around with my nikon d50 and some macs last year and liked the results of my photos), but a friend has a m

  • Better option ??

    Hi, I have a doubt how much the Backup with RMAN. I have this routine of backup: RUN{ SHUTDOWN IMMEDIATE STARTUP MOUNT ALLOCATE CHANNEL disk1 TYPE DISK FORMAT 'D:\ORACLE - BKP\DF_%d_%s_%t_%U.DBF'; BACKUP FULL DATABASE INCLUDE CURRENT CONTROLFILE TAG

  • How to change the color of a Jtable header

    Hi All I want to know how can i place a different foreground color on the table header in my JTable which is placed on an applet . Swaraj