Save a document as a jpeg
I prepared a newsletter, on a Mac operating in Clasic mode using Pagemaker 7, a few months ago and somehow saved each page as a jpeg so that I could transport it on a flash drive to various PCs for printing. It printed the same as the original and I would like to do that again but for the life of me, I can not remember how I did it. It was a very simple process as I remember and the results were ideal for what I need. I now have another newsletter and need to do the same thing. I hope that someone can help me with this as it is really frustrating me that I did something and now can not remember how I did it. Thank you
Are you sure you mean "jpeg"? Saving pages of a newsletter as jpegs seems like a bad choice if your only reason is transporting them to various PCs for printing.
Instead of each page as a jpeg, save the whole newsletter as one PDF instead. Your vector images and text won't be rasterized, and PDFs can be very small in file size if that's a concern. I think jpegs would have to have pretty low res and high compression to get their file sizes down that low, and you would lose lots of quality that PDFs would retain.
Similar Messages
-
How do i save my document as a jpeg or other to put on the web?
i cant figure out how to change a pdf into something else...a png OR jpeg OR something that i can post on the web as an image
thanks, i tried that before, it wont work. says its the wrong type of document AJ Murosky
Desert Christian Archers, Inc.
From: MW Design <[email protected]>
To: AJ Murosky <[email protected]>
Sent: Friday, May 15, 2015 8:58 PM
Subject: how do i save my document as a jpeg or other to put on the web?
how do i save my document as a jpeg or other to put on the web?
created by MW Design in InDesign - View the full discussionOpen the PDF in Photoshop and do the conversion from it. Mike If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7550305#7550305 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7550305#7550305 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in InDesign by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
I made a picture collage in pages from the pictures in iPhoto. You used to be able to print and then say save as a jpeg to iPhoto and that option is gone. How do you turn your document into a jpeg now?
If you chose print, you can save as PDF. If you open the saved PDF in preview, you can save as JPEG, GIF, PNG. FYI you can crop in preview.
Another option is you could use command + shift + 4 to do a screen shot of a specific part of of the screen. -
I want to know how to turn a word document into a jpeg so I can put the document on Facebook as a picture. I have made posters and if I do a print screen they are unable to be read, or if i turn it into a PDF there is no save as jpeg??
iOS device backups are stored in your iTunes library.
Move your iTunes library to an external drive. -
How do I save a pages document as a jpeg?
I thought that I was being smart by creating my son's graduation invite. I made it in pages and I need to save it to be a jpeg in order to print it. Does anyone know how to save a pages doc as a jpeg?
Pages forum: https://discussions.apple.com/community/iwork/pages?view=discussions
Use PDF when layout is the most important part of your document, for example when you create a brochure, a flyer, or a manual with multiple illustrations.
http://www.apple.com/support/pages -
I edited photos in photo shop thay I took off my camera and when I was done I saved them in a folder in my documents as a jpeg. now when I try to open them there is an encryption error message
The folks here would need far more information from you before they provide help.
You know the drill: Exact OS...PS version...etc. The more you provide, the better.
What is the exact message that is displayed?
What have you tried so far?
Do the files display on your browser? In Bridge?
What are you doing when it happens?
Are the files still on your cameras card? If so and,you copy one to your desktop and save it without changes, does it reload properly?
Don't worry about providing too much information. Every little bit helps. -
Word document with picture JPEG
When I save a word document with a JPEG picture inserted to PDF the picture appears gray?
Hi Martin,
Are you viewing that PDF in Adobe Reader or Acrobat (and what version)?
It sounds like you may have an option selected in the preferences that causes large images to appear as gray boxes. Please try this:
Choose Edit > Preferences (Windows) or Acrobat/Reader > Preferences (Mac OS).
Click the Page Display category on the left.
Select Show Large Images, and then click OK.
Did that do the trick?
Best,
Sara -
How do I save a chart as a jpeg?
How do I save a chart as a jpeg. In excel I right click, "save as picture." Not seeing anything like that in Numbers.
Here is a script dedicated to Numbers.
You will find explanations in French and English at the beginning.
CAUTION :
it requires the installation of a Unix command file which gives us the ability to check if a modifier key is depressed.
During my tests, only shift or fn keys were correctly detected.
Maybe it was because I did my tests in the AppleScript Editor.
I choose the fn key which, as far as I know, is not used to define the area to save.
--{code}
--[SCRIPT subset_of_numbers_doc_to_jpeg]
Télécharger getModKey.zip depuis
http://allancraig.net/index.php?option=com_docman&Itemid=100
Décompacter puis déplacer le fichier getModKey dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:UnixBins:
Il vous faudra peut-être créer le dossier UnixBins.
Détails complémentaires dans :
http://macscripter.net/viewtopic.php?id=33652
Enregistrer le script en tant que Script : subset_of_numbers_doc_to_jpeg.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Ouvrir un document Numbers et afficher la feuille dont une portion doit être enregistrée dans un fichier jpeg.
Aller au menu Scripts , choisir Numbers puis choisir “subset_of_numbers_doc_to_jpeg”
Le script affiche la feuille au format PDF dans Aperçu.
Sélectionnez la zone à enregistrer puis pressez la touche fn.
Le script copie la sélection dans le Presse-papiers, ferme le PDF complet,
crée un nouveau PDF à partir du Presse-papiers
puis ouvre le dialogue Enregistrer au format jpeg.
Il restera à définir le nom et la destination du fichier.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Download getModKey.zip from
http://allancraig.net/index.php?option=com_docman&Itemid=100
Expand it then move the getModKey file into the folder
<startupVolume>:Users:<yourAccount>:UnixBins:
Maybe you would have to create the folder UnixBins.
Details available in :
http://macscripter.net/viewtopic.php?id=33652
Save the script as a Script: subset_of_numbers_doc_to_jpeg.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Open a Numbers document and display the sheet whose a subset must be saved in a jpeg file.
Go to the Scripts Menu, choose Numbers, then choose “subset_of_numbers_doc_to_jpeg”
The script display the sheet in a Preview's PDF window.
Select the area to save then press the fn key.
The script copy the selected area in the clipboard, close the full PDF,
create a new PDF from the clipboard's contents
then open a dialog to Save as jpeg.
Define the name and the storage location.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/11/15
--=====
on run
local nomFenetre, nbw
Check that the Unix command file getModKey is available in the folder <startupVolume>:Users:<yourAccount>:UnixBins: *)
set flPth to ("" & (path to home folder) & "UnixBins:")
tell application "System Events" to set maybe to exists disk item (flPth & "getModKey")
if not maybe then
if not my parleAnglais() then
error "Please, install “getModKey” in the folder" & return & "“" & flPth & "” !"
else
error "Veuillez installer « getModKey » dans le dossier « " & flPth & " » !"
end if
end if
set flPth to quoted form of POSIX path of (flPth & "getModKey")
tell application "Numbers" to activate
tell application "System Events" to tell application process "Numbers"
Get the name of the frontmost standard window
so that we will not 'speak' to an inspector or to the Find dialog *)
set nomFenetre to name of first window whose subrole is "AXStandardWindow"
keystroke "p" using {command down}
Wait the availability of the Print sheet *)
tell window nomFenetre
repeat until exists sheet 1
delay 0.2
end repeat
tell sheet 1
click first menu button
click first menu item of menu 1 of first menu button
end tell -- sheet
end tell -- window
end tell -- System Events
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview"
set nbw to count of every window
repeat while nbw = (count windows)
delay 0.2
end repeat
Trigger the menu item Tools > Selection Tool *)
keystroke "3" using {command down}
end tell -- System Events
Now, select the area which must be saved in a jpeg file *)
Thanks to the command getModKey, loop until the fn key is depressed *)
repeat
delay 0.2
if (do shell script flPth) = "131072" then exit repeat
end repeat
The fn key was depressed so we may copy the defined area to the clipboard *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview"
Empty the clipboard. So we will be able to check that the copy task is achieved *)
set the clipboard to ""
Copy to clipboard *)
keystroke "c" using {command down}
Loop waiting for the achievement of the Copy task *)
repeat
delay 0.2
try
the clipboard as «class PDF »
exit repeat (* Exit when the task is achieved *)
end try
end repeat
set nbw to count windows
Close the PDF window *)
keystroke "w" using {command down}
Wait the achievement of the Close task *)
repeat while nbw = (count windows)
delay 0.2
end repeat
set nbw to count windows
Create New PDF from the clipboard *)
keystroke "n" using {command down}
Wait the availability of the new PDF window *)
repeat while nbw = (count windows)
delay 0.2
end repeat
Get the name of the new window *)
set nomFenetre to name of window 1 --(first window whose subrole is "AXStandardWindow")
keystroke "s" using {command down}
Wait the availability of the Save sheet *)
repeat until exists sheet 1 of window nomFenetre
delay 0.2
end repeat
tell sheet 1 of window nomFenetre
-- properties of every UI elements
tell group 1
click first pop up button
delay 0.2
-- properties of every menu item of menu 1 of first pop up button
click menu item "JPEG" of menu 1 of first pop up button
delay 0.2
end tell -- group
-- click button 1 (* Click in the Save button *)
end tell -- sheet
end tell -- System Events
end run
--=====
on parleAnglais()
local z
try
tell application "Numbers" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
--{code}
Of course, thanks to FastScripts, we may link a shortcut to the script.
Yvan KOENIG (VALLAURIS, France) mardi 15 janvier 2011 19:04:38
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
How do I convert a document into a jpeg?
How do I convert a Word document into a jpeg?
Hi there
You cannot directly open a Word document in Photoshop, nor can you save a .jpeg in Microsoft Word. A work around for this is to save the document as a PDF, which will allow you to open it in Photoshop:
1. Open your document in Microsoft Word. Select File > Save As... and select PDF from the Format dropdown menu.
2. Open Photoshop and go to File > Open... and select your newly created PDF file. An Import PDF dialog box will pop up. From the "Crop To" dropdown menu, select Media Box. This will prevent Photoshop from cropping your document size down to just the text area. Click OK.
3. Now, you can select File > Save As..., and select JPEG from the Format dropdown menu.
A quick note, when I opened the PDF in Photoshop, there was a transparent background behind my text. To solve this, just create a new fill layer by going to Layer > New Fill Layer > Solid Color... and selecting white. Then just drag this fill layer below the layer with your text on it. This layer will flatten when you save your image as a jpeg.
Hope this was helpful! -
How do I turn a document into a JPEG form
I have to download a document in JPEG form to a web site.
How do I get document into JPEG form>Hi there
You cannot directly open a Word document in Photoshop, nor can you save a .jpeg in Microsoft Word. A work around for this is to save the document as a PDF, which will allow you to open it in Photoshop:
1. Open your document in Microsoft Word. Select File > Save As... and select PDF from the Format dropdown menu.
2. Open Photoshop and go to File > Open... and select your newly created PDF file. An Import PDF dialog box will pop up. From the "Crop To" dropdown menu, select Media Box. This will prevent Photoshop from cropping your document size down to just the text area. Click OK.
3. Now, you can select File > Save As..., and select JPEG from the Format dropdown menu.
A quick note, when I opened the PDF in Photoshop, there was a transparent background behind my text. To solve this, just create a new fill layer by going to Layer > New Fill Layer > Solid Color... and selecting white. Then just drag this fill layer below the layer with your text on it. This layer will flatten when you save your image as a jpeg.
Hope this was helpful! -
Is it possible to add code to a button that would save the form as a jpeg file?
Hi,
I currently use pdf forms to create records for the work I do, these end up being 5-8MB large and not much smaller when 'flattened'. I currently use a 3rd party app to convert them to jpeg before uploading them to dropbox for the clients. Is there a way to create code that i could add to a button which would save the pdf as a jpeg file?Hi,
The PDF forms are large because they include a large diagram which I then elaborate on with the drawing tools. I actually use acrobat to make and edit the form but PDF Expert on my iPad to edit them etc sorry probably should have clarified that. It is a single page however with form field and the diagram. I also attach a picture to the file before opening it in an app to convert to jpeg and then sending it back to pdf expert.
The save as button only allows me to save it as a flattened or original document within PDF Experts guidelines hence why i was wondering if there was someway to curcumvent that and save it as a jpeg directly, somehow integrating the other app with the pdf expert programm t stop me having to switch between the two.
The more I write the more I see how impossible this might be apologies for my ignorance if so. -
When ever I try and save as a png or jpeg photoshop cc crashes and the file doesn't save. Also there is a warning button next to save that when i click it it says:
"the current file format must be saved as a copy because: It will not save all the document layers."What OS version are you using?
Have you installed the 14.1.1 update?
And it sounds like you have added layers to the image, so it must save as a copy to those format that don't support layers (which is perfectly normal).
But I'd like to know what is causing you to crash while saving.
Does it crash while the save dialog is open? After the format options dialog goes away? Have you tried disabling background saving? -
Document sizes and jpeg compression / quality
In relation to Photoshop, in the status bar at the bottom it displays what it calls “document sizes”. Would someone be able to clarify can this be used to determin the quality of a jpeg file ?
For example if I open up a jpeg with no compression (file size on disk is 4.57mb) it displays Doc:34.5M/34.5M however if I open the same file with compression set at 5 (file size on disk is 748kb) and ‘document size’ doesn’t change. How does the document size relate to jpeg compression etc...?
Thank youOpen a file, say a tiff or psd, zoom in close to the image, about 400% on a recognizable detail. Use the Save As... command, select JPEG, and click Save.
When you get to the dialog box, run the Quality slider to 0 and observe what happens to the pixels. It's like they are clumped together in large blocks.
That's how it saves on disk space when it is written back to the file.
477k/477k is the uncompressed size/size in ram and 31.5k is the saved to file compressed size caused by clumping all those pixels together. Of course you trash the file that way,but that's where compression saves space. Not by reducing the pixel count,but by consolidating them.
My point is is that you adjust that slider by eye and from there decide what optimal quality number is worth the space saved.
With broadband connections and terabyte drives, I would not see any point to less than 12 quality compression these days. -
When I save a photo as a jpeg in PE 13 the file size is much smaller than with PE 12. Why?
when I save a photo as a jpeg in PE 13 the file size is much smaller than with PE 12. Why?
Are the image all the same size the % files open into a document seems to vary with the number of pixels the image being opened has. Check the Image size.
-
I have been trying to save a document in illustrator and every time I try to, a dialog box pops up and says the following- Can't save the illustration. You do not have enough access privileges. id: -5000....This has been happening ever since I switched to CC and whenever I try to save something in indesign, I get a dialog box that says that my file is corrupt. How do I fix this? I cannot get any work done !!!
You should ask in Illustrator
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Maybe you are looking for
-
Can I upgrade my Sony Laptop's Graphic Card?
My laptop is relatively new and I only bought it a few months ago, model #VPCEB. It currently has a 512 MB ATI Radeon HD 5470 which I want to upgrade so I can have StarCraft II run smoothly because it is kind of choppy right now. I just want to know,
-
I can no longer directly email pdfs from mac preview
Since upgrading to Lion I can no longer open a pdf file in Mac Preview and then select "Mail Selected PDF Document." When I do so I receive an error message: The "New Email With Attachement" service could not be used. Anyone know what the problem is
-
After I installed 10.6.8, my HP Officejet 7310 lost the ability to print 2-sided. I installed the latest HP drivers for Snow Leopard, the 2-sided option shows up in the print window but is turned off and greyed out. Also the scan function won't let
-
Cost Distribution in Shopping Cart for different account assignment type
Hi friends, We are at SRM Server 5.5 at level SAPKIBKT07. Business scenario is extended classic. User is creating a shopping cart with single line item and distributing the cost to multiple account assignments (say Cost Center and Order). Shopping ca
-
I'm trying to create two realms that are partitioned pretty heavily, separating production from development, but using the same access manager infrastructure. This seems to fail, in that when I login to the realm I've partitioned for development, I c