SCAN ABAP-SOURCE : problems to recognize all DATA declarations

Hi all !
My problem is simple :
When I scan a program, all data declarations structures are not recognized :
        SCAN ABAP-SOURCE t_code_prgm TOKENS into t_tokens
                                  STRUCTURES into t_structures
                                  STATEMENTS into t_statements
                                      LEVELS into t_levels
                                  WITH INCLUDES
                                  WITH ANALYSIS.
In "t_structures", for some data declarations, the scan find statement types "d" (DATA) and "t" (TYPES), but not others ("k" --> constants ...etc...)
With DATA, SCAN recognize itab like "DATA : BEGIN OF itab ....", but no "DATA wa_data type ..." !!!
Do someone know why ?
I need this to scan programs and control how DATA are named.
Thanks !
Stephane.

Hi,
If RSA3 is giving the error that means the data source is not ready yet.
May be you should again do the transports and see if there is no difference between the development and production system.
Also make sure that you have maintained all the settings for the CO-PA to work as it was in the developement system.
Also
Try to run a delta after 2 hours of initialization in production dont schedule it immeadiately.
Are you sure that delta and init and RSA3 was running fine in quality and developmenet system in the same way as you are trying here??
Thanks
Ajeet

Similar Messages

What is the use of keyword SCAN ABAP-SOURCE

Hello experts,
what is the use of scan abap-source. please explain. what is tokens, statements, levels in that.

Hi
SCAN
This statement is for internal use only.
It cannot be used in application programs.
SCAN ABAP-SOURCE itab1 ...TOKENS INTO itab2
 ...STATEMENTS INTO itab3.
Parts marked with " ..." are interchangeable
Addition 1
... FROM n1
Addition 2
... TO n2
Breaks down the source code table itab1 into tokens not from start to finish, but only from line n1 to line n2.
The additions FROM n1 and TO n2 must, in this order, follow the specification of the source code table itab1.
When using the start specification n1, use the addition WITHOUT TRMAC to ensure that there are no unnecessary database accesses to the table TRMAC.
The end specification n2 is treated as "soft", i.e. a statement that begins on a line <= n2, but ends only on a line > n2, is returned completely.
If the end specification n2 is split in a chain statement, only the split part up to the next comma is returned completely, not the entire chain statement up to the next period.
Negative line specifications are not allowed and result in a runtime error.
A line specification of 0 amounts essentially to no specification.
If n1 number of lines in source code table, the scanner is not called (SY-SUBRC = 2).
If n1 > n2 and n2 > 0, the scanner is not called (SY-SUBRC = 2).

Addition 3
... KEYWORDS FROM itab4
Does not return all statements, only those specified in the key word table itab4.
If the key word table is empty (i.e. it contains 0 lines), all the statements are selected.
The lines of the key word table are treated as a character field.
To select a Native-SQL-statement or a macro definition, you can specify the pseudo key words EXEC_SQL or DEFINE_MACRO. It makes no difference whether the statements EXEC or DEFINE occur as well. Native SQL statements and macro definitions are returned as one statement (of type E or M even if the expansion of a macro definition results in more than one statement.
If the key word table contains a blank line, blank statements are also selected.
Addition 4
... LEVELS INTO itab5
Stores details about each edited source code unit (source code table itab1 itself, expanded include-programs, expanded macro definitions) in the level table itab5.
Specification of a level table makes sense only with the addition WITH INCLUDES.
The level table itab5 must have the structure SLEVEL.
The fields of the structure SLEVEL - and consequently the columns of the level table itab5 have the following meaning:
TYPE
Type of source code unit with the following possible values:
P (Program)
D (Internal DEFINE macro)
R (Macro from table TRMAC)
NAME
Name of source code unit (name of include program, macro name)
DEPTH
Current nesting depth of source code unit (>= 1)
LEVEL
Index of superior (i.e. including or calling) source code unit in the level table (>= 1, if DEPTH >= 2, otherwise 0)
STMNT
Index of superior (i.e. including or calling) statement in the statement table (>= 1, if DEPTH >= 2, otherwise 0)
FROM
Index of first statement of source code unit in the statement table (>= 1)
TO
Index of last statement of source code unit in the statement table (>= 1)
If the source code unit contains include programs or macro calls, the line range [ FROM, TO] in the statement table also covers the statements in subordinate source code units.
Addition 5
... STRUCTURES INTO itab6
Details of the construction of the source text table are given in the structure table itab6.
The structure table itab6 must have the structure SSTRUC.
The fields in SSTRUC (which are also the columns of structure table itab6) have the following meanings:
TYPE
Type of the structure with possible values:
P (Beginning of the source code)
R (Subroutine)
M (Macro, EXEC SQL)
I (Loop)
A (Case distinction)
C (Condition in a case distinction)
J (Goto command)
D (Structured declaration)
E (Event)
S (Follow-on from simple structured statement)
STMNT_TYPE
The statement type of the beginning of the structure. The values are listed in the type pool SCAN in structure SCAN_STRUC_STMNT_TYPE.
KEY_START
Flags whether the start of the structure is described semantically ('X' if there is a special statement, otherwise ' ').
KEY_END
Flags whether the end of the structure is described semantically ('X' if there is a special statement, otherwise blank).
STMNT_FROM
Index of the first statement of the structure in the statement table itab3.
STMNT_TO
Index of the last statement of the structure in the statement table itab3.
Index of the first substructure of the structure in structure table itab6.
STRUC_TO
Index of the last substructure of the structure in structure table itab6.
BACK
Index of the structure in the structure table itab6 that contains the structure as a substructure (0 if the structure is the root structure of a structure tree).
Addition 6
... OVERFLOW INTO c1
The addition is only allowed and required if the token table itab2 has the structure STOKEN or STOKEX.
If a token is too large to be stored in the token table in the field STR, it is placed in the overflow area c1. The offset of the token in the overflow area then lies in the token table in the field OFF1.
Addition 7
... WITH ANALYSIS
Breaks down each token t = a+b(c) according to the logic of the RSYN key word >ANALY into its three components a, b and c.
Offset and length of components a, b and c are stored in the fields LEN1, OFF2, LEN2, OFF3, and LEN3 in the token table. (The offset of OFF1 is always 0 and therefore not required.)
If you specify the addition WITH ANALYSIS, the token table itab2 must have the structure STOKESX, so that the fields LEN1, OFF2, LEN2, OFF3 and LEN3 are available.
If the token table has the structure STOKEX, you must consider the following:
If the whole token exists in the token table, the offset specifications are relative to the token start. If the token is in the overflow area c1, the offset specifications are relative to the start of the overflow area.
Addition 8
... WITH COMMENTS
Returns comments also, with each individual comment representing a token. The system additionally stores entries for each full block of comments in the table itab3, differentiating between comments that occur within statements and those that occur at program level. In itab3, an entry for a comment within a statement always comes before the statement containing the comment.
Example
Look at the following program fragment. The preceding numbers are the indexes of the tokens.
1 * An example *
2 * with scattered comments
6 MOVE
3 * Inserted comment 1
7 X
4 * Inserted comment 2
8 TO
9 Y
5 * Inserted comment 3
SCAN then enters the following values for the components TYPE, FROM and TO (in this order from left to right) into itab3.
'P' 1 2
'S' 3 5
'K' 6 9
If the addition ... WITH COMMENTS is used, the table itab2 must have the line type STOKES or STOKESX.
Addition 9
... WITH INCLUDES
Also breaks down subordinate source code units (included programs, called macros) into tokens.
You should normally combine the addition WITH INCLUDES with the addition LEVELS INTO itab5.
If (at least) one included program does not exist, SY-SUBRC is set to 1 and the relevant INCLUDE statement is flagged in the statement table itab3 by the statement type J (instead of I), but the breakdown process continues. The level table itab5 contains no entry for include-programs that do not exist.
If you combine WITH INCLUDES with WITHOUT TRMAC , TRMAC-Macros are not expanded because the system does not recognize them as subordinate source code units.
When macro calls are expanded, no position specifications are available. The corresponding fields in the token table itab2 and the statement table itab3 are then set to 0.
Addition 10
... WITH TYPE-POOLS
This addition has the same effect as the WITH INCLUDES addition, except that with the former include programs belonging to type groups are broken down into tokens.
Addition 11
.. WITH LIST TOKENIZATION
Tokens of the form (a1, a2, a3) are not returned as tokens but broken down into the elementary components.
Addition 12
... WITHOUT TRMAC
If a statement begins neither with an ABAP/4 key word nor with a DEFINE macro, the system does not check whether this is a TRMAC macro, but assumes an unknown statement. (Unknown statements are flagged in the statement table itab3 with a U in the field TYPE.)
To avoid unnecessary database accesses to the table TRMAC, you should use the addition WITHOUT TRMAC whenever you assume that the source code to be scanned contains unknown statements. Unknown statements are particularly likely to occur if you use the addition FROM n1, because the scanner does not start at the beginning of the source code, but from a specified point.
If you use WITHOUT TRMAC with WITH INCLUDES, TRMAC macros are not expanded because the system does not recognize them as subordinate source code units.
Addition 13
... PROGRAM FROM c2
Addition 14
... INCLUDE INTO c3
Addition 15
... MESSAGE INTO c4
Addition 16
... WORD INTO c5
Addition 17
... LINE INTO n3
Addition 18
... OFFSET INTO n4
The above additions have the same meaning as those for the
SYNTAX-CHECK: statement: c2 is an input field for a program name to be assigned to the source code, while the fields c3, c4, c5, n3 and n4 are output fields in case an error occurs.
To be able to analyze errors without modifying programs, use the additions INCLUDE, MESSAGE, WORD, LINE and OFFSET. These provide information about the errors which have occurred.
Variant 2
SCAN AND CHECK ABAP-SOURCE itab1 ...RESULT INTO itab2.
Parts marked with " ..." are interchangeable
Extras:
1. ... PROGRAM FROM c1 2. ... INCLUDE INTO c2
3. ... MESSAGE INTO c3
4. ... WORD INTO c4
5. ... LINE INTO n1
6. ... OFFSET INTO n2
The syntax of the program in table itab1 is checked. During the check, all of the information from the program, such as statement structures, statements, tokens, data objects, types and do on are placed into the result field. This field must have the type SYSCH_RESULT, which is defined in type group SYSCH. You must therefore declare type group SYSCH in your ABAP-program using a TYPE-POOLS statement.
&ABAP_ADDITION _1&
... PROGRAM FROM c1
&ABAP_ADDITION _2&
... INCLUDE INTO c1
&ABAP_ADDITION _3&
... MESSAGE INTO c3
&ABAP_ADDITION _4&
... WORD INTO c4
&ABAP_ADDITION _5&
... LINE INTO n1
&ABAP_ADDITION _6&
... OFFSET INTO n2
The above additions have the same effect as the corresponding additions in the statement SYNTAX-CHECK: c1 is an input field for a program name to be assigned to the source code, the fields c2, c3, c4, n1 and n2 are output fields, used when errors occur.
To enable you to analyze errors without having to modify the program, you should specify the INCLUDE, MESSAGE, WORD, LINE and OFFSET additions for the information about the error that occurred.
Reward if usefull

Using SCAN ABAP-SOURCE keyword

Hi,
My requirement is to get a report program name from the user, drill down the report to see how many Includes and subroutines are there in the report and in which level.
I was able to drill down the report for finding the Includes with their level using this key word SCAN ABAP-SOURCE.
Can someone provide me with a code to find the number of subroutines along with the subroutine name and which level they are present.
Thanks in advance.
Harini

Hi,
I have already drilled down the report to find out thenumber of includes and their levels.
By using CALL FUNCTION 'GET_GLOBAL_SYMBOLS'
it accepts to search only for a character in the program.
I require it to search for the keyword 'PERFORM' and also find in which level it is defined.
Please let me know how to achieve this.

Regarding SCAN ABAP SOURCE PROGRAM

Hi Friends,
I am using SCAN ABAP PROGRAM in my code .
        SCAN ABAP-SOURCE source_sub
        TOKENS     INTO i_tokens_sub
        STATEMENTS INTO i_statements_sub
        KEYWORDS   FROM i_keywords_sub
        LEVELS     INTO i_levels_sub
        WITH ANALYSIS.
after this statement execution , i_token getting filled up with token used in source code source_sub
but if i have to catch specific keywords is there a way that i can append those keywords to i_keywords_sub structure and then scan so that a line where that particular keyword used can be captured .
i am not knowing how to do that .Can i get some help on this.
Thanks&Regards
Poornima

Hi,
You can try using the SAP standard program RS_ABAP_SOURCE_SCAN and give key word for searching in the ABAP source.
Thanks,
Sriram Ponna.

Help for "WITH INCLUDES" in scan abap-source.....

Hiiii,
 Can anyone help me how to use "with includes" in "scan abap-source" for
 seperating includes in the program?????
 If anyone has sample code plz do send it for help....
Thanx,
Mandeep.

Hi
use the command
SCAN ABAP-SOURCE <source name> tokens..<itab1>
 statements <itab2>
see the sample dummy code
READ REPORT it_itab_1file-obj_name INTO it_itab1.
SCAN ABAP-SOURCE it_itab1 TOKENS INTO it_itab21
 STATEMENTS INTO it_itab3
 STRUCTURES INTO it_itab6
 WITH COMMENTS
 WITH INCLUDES
 FRAME PROGRAM FROM it_itab1
 INCLUDE INTO it_itab_i
 LEVELS INTO it_itab5.
*sort the level table
SORT it_itab5 BY name.
CLEAR v_flag1.
READ TABLE it_itab21 WITH KEY type = 'I'.
IF it_itab21-str NE 'REPORT'.
 IF it_itab21-str NE 'PROGRAM'.
 SELECT SINGLE subct INTO v_str11
 FROM ybstcobs
 WHERE objna EQ it_itab_1file-obj_name
 AND ( objct EQ 'PROG'
 OR objct EQ 'FUNC'
 OR objct EQ 'BDCP' ).
 IF v_str11 EQ 'I' AND sy-subrc EQ 0.
 ELSE.
 v_flag1 = 'X'.
 ENDIF.
 ENDIF.
ENDIF.
CHECK v_flag1 NE 'X'.
CLEAR v_flag1.
*get the level of include strucuture
PERFORM get_include_details.
*& Form get_include_details
*gets the include structure details
FORM get_include_details .
LOOP AT it_itab5.
 READ TABLE it_itab3 INDEX it_itab5-from.
 it_itab_incl-incl_from = it_itab3-from.
 READ TABLE it_itab3 INDEX it_itab5-to.
 it_itab_incl-incl_to = it_itab3-to.
 it_itab_incl-incl_name = it_itab5-name.
 it_itab_incl-ln_level = it_itab5-depth.
 it_itab_incl-ln_level1 = it_itab5-level.
 APPEND it_itab_incl.
ENDLOOP.
SORT it_itab_incl BY ln_level.
ENDFORM. " get_include_details
Reward points for useful Answers
Regards
Anji
Message was edited by:
 Anji Reddy Vangala

Fetching all data from MS access PROBLEM !!!

Hi all,
I am having problem of fetching all data from MS ACCESS, ie, I have 112 rows of data, yet when executing query SELECT * ... only 70 items are retrieved. Don't know why, but the retrieval prcess stops on item 69 and want get the rest of the data.
I am executing the query in a WHILE loop, don't specify the number of loops !!! so I should be able to get all of the data. Why then I always only get 69?
Second q.
What is the right SYNTAX for retrieving specific data. ie. SELECT id from images WHERE size = 58
is this correct? ie. size is declared as number?
ANy help would be much appreciated.
Thanks

1. Where from you are fetching the data? Is it from bean or JSP or servlet? Can you post the code?
2. Yes. the sql syntax is correct.

How can you scan the Source Code of a bunch of function modules

We are in a 46C system. I need to be able to scan the soruce code of a bunch of function modules. I was unable to use the RPR_ABAP_SOURCE_SCAN and return the lines with the string I was searching for.
Thanks
Hari

Hi,
Read the main program that is the funtion pool into an internal table with statement.
READ REPORT
Use the key-word
SCAN ABAP-SOURCE
You can use the addition with includes as the function pool contains only include programs the with includes addition will read the source code present in the include.
Like this you can achieve it
" Example
DATA:
itab TYPE TABLE OF char255,
itab1 TYPE TABLE OF stoken,
itab2 TYPE TABLE OF sstmnt.
READ REPORT 'SAPLSFES' INTO itab.
SCAN ABAP-SOURCE itab TOKENS INTO itab1
STATEMENTS INTO itab2
WITH INCLUDES.
after this you can search the string in the internal table with lots of additions available in the SCAN ABAP_SOURCE
regards
sarves

Importing content: transport modes 'all', 'data'

I try to import *.epa file and get error for evere entity in package:
PcdGlTransportManager.importObject(): cannot import an object in transport mode all that has been exported with transport mode data.
It seems the thing is in transport mode. How to change it?

Hi Denis,
I am facing same problem whiile importing BP for ESS & MSS (ERP 2005NW04s) into EP NW04(6.0 sp14).
Either i can modify all .properties files as suggested by you or we can upgrade EP to 04s (7.0).
Did you face any problem after modifying all 'data' to 'all'; is it working fine?
Subhash

Read ABAP source

Hi,
Does anyone know how to load ABAP source code to an internal table.
Indeed, I'd like to write a tool to analyse my code and generate a calling tree.
The "SCAN ABAP-SOURCE" instruction seems not to bo allowed in programs.
Do you know others instruction to do that ?
If not, can someone tell me where programs and function modules are stored (which tables) ?
Thank you for your help,
Quentin

first refer this thread for download abap code into text file.
once this completed than you can upload this text file by just gui_upload fm.
How to download a ABAP report to text file

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

Date parameter in report whose source is SSAS cube shows all dates in DimDate?

My cube consists of a FactTable that has a foreign key to [DimDate], through column [DateKey]. My DateKey has dates from
20010101 to 20201231. My fact table only has data from today (20141017).
In SSRS, I add the dimension Dim Date, Date Key as parameter. When I run the report, everything runs great, the only problem being that the date dropdown shows all the
DateKeys from [DimDate] (20010101 to 20201231).
How can I only show in the dropdown parameter only the DateKeys that have actual data? In this case, the parameter would only only display 20141017.
Thanks.
VM

Thanks, but I don't think you read the whole question.
I'm using as datasource an SSAS cube. The query that populates the parameter looks like this:
WITH MEMBER [Measures].[ParameterCaption] AS [Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION MEMBER
[Measures].[ParameterValue] AS [Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME MEMBER
[Measures].[ParameterLevel] AS [Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS ,
[Dim Date].[Date Key].ALLMEMBERS ON ROWS FROM [Sales cube]
VM

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Custom delta extractor: All data deleted in source table in R/3

Hi everyone,
I have made a custom delta extractor from R/3 to a BW system. The setup is the following:
The source table in R/3 holds a timestamp, which is used for the delta. The data is afterwards loaded to a DSO in the BW system. The extractor works as expected with delta capability. Furthermore if I delete a record in the source table, this is not transmitted to the DSO, which is also as expected.
The issue is this however: If we delete all data in the source table, then on the next load there is a request showing 1 record transfered to the DSO. This request does, however, not show up in the PSA, and afterwards all data fields in the DSO is set to initial.
Does anyone know why this happens?
Thank you in advance.
Philip R. Jarnhus

Hi Philip,
As you have used generic extractor I am not sure how the ROCANCEL will work but you can check the below link for more information,
[0RECORDMODE;
Regards,
Durgesh.

Problem in the load, all data skipped

Hello,I have a problem when I load data, the message (WARNING) is:"Aggregate storage applications ignore update to derived cells. [209774] cells skipped"All my data are skipped, and this is the only message I have, I do not have any errors in my *.err file. Does this mystery can be explain?

Are you sure you're not trying to load to a non-level 0 member in one of your dimensions? Unlike a block storage database all AS data must be loaded at level 0.Mark Rixonwww.analitica.co.uk

Create a new OSB domain and data source problems

Hello,
I noticed a problem while create a new OSB domain with Oracle Service Bus 10gR3 on Solaris 10 (intel-based).
This domain is composed of two managed servers deployed on a cluster.
I have configured the JMS reporting data sources to use an Oracle 10g (XE) database (driver Oracle Thin (non XA)) installed on a remote server.
While trying to start my managed servers, the startup process of these managed servers failed due to a data source problem on "wlsbjmsrpDataSource" or "cgDataSource-nonXA".
The workaround I found is to delete and recreate (through the WLS console) the data sources "wlsbjmsrpDataSource", "cgDataSource-nonXA" and "cgDataSource".
In this situation, my managed servers can be started properly.
Is it a known problem located on the configuration wizard?
Thanks for your help.

Hi
For the answer.
I fully understand that those datasources are default ones and are mainly related to JMS reporting.
But my question was probably not well expressed.
The problem I had is when the domain is created, the managed servers won't start due to problems related to theses datasources.
The workaround I found is to delete and to create those datasources from the WLS console.
In this situation, the managed servers are able to be started.
I want to know if this is a known problem/limitation of OSB 10gR3 with Solaris 10 and Oracle 10g?
Thanks for your help.

SCAN ABAP-SOURCE : problems to recognize all DATA declarations

Similar Messages

Maybe you are looking for