Scans from HP C4680 are not properly saved after upgrade to OS X 10.9

After upgrade to OS Mavericks all-in-one HP C4680 does print and scan however scans are not properly saved. Saved file in preview shows grey bands; text is not readable.
Driver update from HP support didn't resolve the issue, nor any workaround suggested in HP community.
Issue is appaerently not unique for C4680 but also other HP equipment.
Has anyone encountered this malfunction? If yes were you able to resolve it and how?

Your screenshots are not appearing for me.
Uninstall PC Tools "iAntiVirus" and "MacKeeper" according to their respective instructions. Confirm their thorough, complete, and permanent eradication from your Mac, and evaluate the results.
Other problems exist, including what appears to be a modified Hosts file. If you know the reason for its modification, proceed on the basis of that knowledge. A remote access tool known as Teamviewer is also installed. If you no longer require it, uninstall it.
Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

Similar Messages

Sent messages from IMAP accounts are not being saved

I have three IMAP accounts setup on MAIL but none of them save sent mail - preferences are set correctly ......

Who is the provider of this account? Where do server-stored mailboxes appear in Mail? Do they appear as subfolders of the account’s Inbox maybe?
If server-stored mailboxes appear as subfolders of the account’s Inbox in Mail, this account requires INBOX to be typed in Preferences > Accounts > Advanced > IMAP Path Prefix for Mail to manage and display its mailboxes properly. After having done that, Mail should be able to save messages on the server, but maybe in a mailbox different from where you want them to be. To fix that, select the desired folder in Mail and choose the appropriate option from Mailbox > Use This Mailbox For.

Mail Rules Are Not Being Saved After Mail Is Close & Opended

I am using Mail 3.6 with 10.5.8 on a Macbook Pro. I have set up mail rules so that an email from a specific person's email address goes to two places: 1) Move to a folder on .Mac & 2) the Inbox on the Mail app. Upon first setting this up it works. BUT when closing and opening the program or waking up the computer from a sleep status the rule disappears and the Rule Preference window shows that email message is now going only to the .Mac folder & none to the Inbox!
I spent a lot of time with Tech Support via telephone and even ended up reinstalling (A&I) OS 10.5 (plus updates); this was done on the tech's theory that Mail was corrupt on the root level. HOWEVER, that was not the solution as the problem still exists with the reinstalled OS.
Can someone from Apple's tech support who has knowledge of this issue please help?
Thanks,
Bob

Since replies to questions and comments in these Discussions
is mostly from users who are registered to post & reply here,
you may find better result in a call into AppleCare support and
if there is an incident or case number involved in the issue you
have experienced with corrective actions taken so far in your
communications with Tech Support(?) by phone, be certain a
reference is made to that conversation, for proper follow-ups.
+{You could refer someone you talk to there, to your post in here.}+
There may be some other issue, perhaps relating to hardware
or something else, that may bear looking into. Have you seen
a result of the system log files and reports, such as Console
generates from the computer in action? There may be a clue
in those almost cryptic reports. Also, you have a hardware test
on bootable partition in the original system install disc; that's a
specific test version for your computer, an Apple Hardware Test.
Boot instructions are on the disc's label. Run it in a repeat-loop.
Is there any third-party software installed later on, which could
result in complications or conflicts with the Mac's Mail app?
The problem, if not software, could be hardware. Or a logic error.
If you have AppleCare coverage in effect on the computer, that
is the call to make; and keep track of your incident/case number.
Good luck & happy computing!

IdM 8.1 New Labels are not getting displayed after upgrading from 7.1

We have recently upgraded IdM 7.1 to IdM 8.1 and after upgrading the New Labels as New Navigation Menu's in Admin panel are not getting resolved and
Appearing following way
UI_APPR_XML_PROVISIONER_EMPTY_TABLE
UI_APPR_JAVA_LIST_PROVISIONING_REQUESTS_LABEL
We have checked these labels are there under WPMessages_en.properties file (under idmcommon.jar) but still they are not getting reflected.
Any help on this will be appreciated.

May be your location credentials out of sync.
Un-register and re-register the locations
1)Right click the location in the Control Center manager and select Unregister
2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

All my GPS Apps are not working anymore after upgrading to OS4

Hi folks,
all my GPS APPS are not working anymore since I upgraded to OS4.
I am living in Germany and using Iphone 3GS 32GB.
Are there any plans from apple to resolve this issue shortly ß Or shuld we
chance to google or Microsoft produkts....?

I'm getting very interested in GPS problems across the entire iOS device range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

Access point are not coming up after upgrade image of WLC

Hi,
I have AIR-WLC4402-50-K9 WLC i that current IOS is 7.0.98.218 and i upgraded with 7.0.116.0 IOS but after upgrading and reboot the WLC from 15 access point 3 access point are not coming up and 12 are coing up and working fine (4 1142 and 11 1131 series access point) 3 which are not coimg is 1131 series access point. when i login with console to 3 access point its rebooting 2 times and coming on ap: prompt.
In between that i reloaded the WLC one more time because from 15 acess point only 4 aceess point are came up and i also cleck the show boot on wlc its output is
7.0.116.0 (default)
7.0.98.218 (active)
so i reload the wlc and checked out of 15 acess point now 12 acess point are up and still 3 are not. And i also checked the output of show boot command its
7.0.116.0 (default)(active)
7.0.98.218
So i things its because of when 2nd time i reload the wlc the remaining 3 access point are getting image from wlc but because of reload its connection should be loss and error loading flash error are coming on acess point.
After that i recover the IOS for access point and convert into autonomus and from autonomus convert into Leightweight Access point. I also attached the procedure for recover the ios of access poing
But my question is why this 3 access point are not coming up is this happen's after upgrading wlc can any one please send me Step by Step WLC S/W Upgrade' process and if this this happens some time please send me any doccument related to this.

Sunil,
When you rebooted the controller did you do it from the Web GUI, the CLI, or did you physically reboot the controller? I believe and maybe incorrect but if your getting the ap: < prompt > that means that there is no firmware on the unit. If you have restored these to functioning autonomous unit and then re-converted them to Lightweight and it's still happening then we need to look at a debug output of what is happening when those AP's attempt to join the controller.
The capture you attached shows that it appears to join the controller and get a config, but are you saying that when it reboots again it stops working?? the other thing I would reccomend is clear out the flash memory since your capture shows the possibility that there are several copies stored there.
Hope this helps.

Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

My add-ons are not running anymore after upgrade to Firefox 3.6.13 and the add-on page crashes efey time I open it.

E-mail notifier and weather forecasts are not visible anymore in my taskbar.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button (in Firefox 4: right-click the extension -> "Find Updates") to do a compatibility check.

Toolbar icons are not displaying in After upgraded to Acrobat 9.4

I had developed one plug in tool. which was working fine in Acrobat 9.0 , After i upgraded to Acrobat 9.4 I am unable to se few Icons. Please tell whether we should make modifications in the code written in Javascript or ?????

We don't have your code - you do. I would simply use the debugger to track down the problem.

Photographs uploaded to Behance from Lightroom 5 are not oriented properly. What can I do?

Photographs uploaded to Behance from Lightroom 5 are not oriented properly. What can I do?

Hello,
Thanks for writing. The photo will be oriented exactly as it is uploaded, as we have no rotate feature. Before uploading, please open the file and make sure that it is uploaded in the orientation that you would like. If you're still having trouble (i.e. your image looks correct before you upload it, but is rotated incorrectly on Behance), your original file is likely not showing its true orientation. Please try saving the file again, or making a duplicate and saving that before uploading.

Text fields populated from lov mapping are not saved to database

Hi Everyone,
I'm having a wierd problem. My requirement is to autopopulate two text fields field 2 and field 3 when a value is selected from lov in field1 and save all the values to database on click of a submit button.
Using lov mapping i'm able to populate field 2 and field 3 with corresponding values based on the value selected in field1. And also field2 and field3 should be in the readonly mode so that user cannot change the value.
So to make the fields readonly i have changed the property of readonly to true for field2 and field3. But if I change the readonly property, the values for field2 and field3 are not being saved to database.
The values are getting saved to database only when readonly = true for messageTextInput item type or if the item type is a form value.
I also tried disable = true, which also didnt work.
I tried to debug by writing some sop statements in PFR, but these statements also returned null for pageContext.getParameter("field2") etc;
Can anyone please tell me how to solve this problem?
Thanks
Sunny

Hi Gyan,
I forgot to mention that , I also tried messageStyledText. Which also didn't work. I wanted to use vo.setAttribute as my last option, but i wanted to understand why the values are not saved to database when the text item is showing the values on the page.
Thanks
Sunny

My Notes from iPhone are not being saved to Notes in Outlook when I sync. How can i get Notes to back up in Outlook?

My Notes from iPhone are not being saved to Notes in Outlook when i sync. How can I get Notes to back up in Outlook?

I have iPhone 4S

While Creation Of SaleOrder Char Values are not getting saved.(V C)

Hi SAP gurus,
One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
Awaiting for your valuable reply.
Cheers,
Kumar.S

Kumar ,
If you assign values in classification view or configuration profile they will become default for the product, and it willnot be changed in sales order.
another thing if the item category is incorrect you will not get the configuration pop up at all .
problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
see the result of configuration before saving the sales order , i hoep it will work for you.
I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
Check and revert back.
Regards
Ritesh

Notes are not being Saved

Recently upgraded to an iPhone 3G S from the first generation iPhone. Synced my phone and everything is fine, but when I use the Notes application the notes are not being saved. Anyone know of a way to fix this?

Ensure that the "sync notes" box is checked in iTunes. Also note that the notes syncing feature doesn't work very well yet.
If you have a note on both the phone and the computer, and you change/update the one on the phone, the next time you sync the computer version will over write the phone version.
coop

Settings are not being saved when i reboot

i am having a problem when i restart my computer my settings such as dock settings background settings are not being saved how do i resolve this problem?

Welcome to the Apple Discussions!
Is this just for new settings that won't stick? Or have all your original settings reverted to the defaults? Have you started up from your Mac OS X install disk and used the Disk Utility to "repair disk"? Do you have a backup of your important files?
-Doug

Scans from HP C4680 are not properly saved after upgrade to OS X 10.9

Similar Messages

Maybe you are looking for