ScatterGraph does not allow manually editing axis range at runtime

I'm using both ScatterGraph and WaveFormGraph controls in a Winforms VS2010 application. I have the axis interaction mode set to EditRange. The WaveFormGraph control allows editing the axis range by clicking on the end labels for the axis and changing them. The ScatterGraph control does not even though the documentation that I have read indicates it should. The axis mode does not seem to be the issue as I have changed between Fixed and AutoScaleLoose (which is not the selection to have while displaying changing data if you want your manually-entered range to be maintained). I tried a new project with a ScatterGraph control with default settings and verified that it does not allow you to edit the axis range. Is there a way to change settings to allow you to manually edit a ScatterGraph range in this way at runtime?
Thank you!

Hi Lybro,
Have you enabled the "EditRange" InteractionMode of the scatter graph object? There are two places that the interaction mode is set, one for the axis and one for the scatter graph, both need to be enabled for the editing to work. I just tested this with Measurement Studio 2013 and it is working. Let me know if this helps.
Regards,
Kevin

Similar Messages

Photos does not let one edit in external editor ....

I'm shocked , taken aback indeed , Photos does not allow editing in external software , i.e. Photoshop , .... or am I wrong.
If it is the case it does not allow external editing , especially in RAW , then I am not impressed .
iPhoto was rubbish ... really it was .. but if Photos does not allow editing other than within it'self ... well I'm sorry.... it's pure mince ( as we say in Scotland .

Yes, it's terrible. They've basically ripped away much of the key functionality of iPhoto making it really hard to "get" your photos.
All you can do until someone hopefully provides a third party plug in (or Apple sees sense) is to try and locate the photo file manually:
1. Locate Photos Library.photoslibrary
2. Right click and select Show Package Contents
3. Open the Masters folder
4. Three ways to find it:
Delve manually: in this folder, all your photos are organised by year, month, and supposedly day, and then various subfolders within that but actually it's inconsistent and/or the photos and video are using different time zones*. So you may need to check the previous day or a day later.
Search within Masters, eg "Created date" is "within last" "5 days" or whatever suits you
Right click the photo in Photos to get its file name, and search for that as a Finder search. However the photos are so "locked away" that you can't even click Command to see the file path in the search results (as you can usually do with search results). You will need to click "show all in Finder" and then finally you'll get to the actual image (and be able to see the file path).
As an example, this is what the file path looks like for an image of mine:
Photos Library.photoslibrary -> Masters -> 2015 -> 04 -> 12 -> 20150412-100955 -> IMG_1881.PNG
*Note on subfolder craziness:
As an example, I took two photos on my iPhone today within one minute of each other. They are in two different subfolders. A week ago I took six photos over three hours, and they are all in the same subfolder. So it's a complete mess.

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video-.with no way to edit full format video. Is this statement true?

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video….with no way to edit full format video. Is this statement true? Does iMovie support HD 1080p @ 60 fps?

Iggy826 wrote:
… Is this statement true?
yes and no!
using the intended Import from Camera routines, iM converts automatically in its very own AppleIntermediateCodec. so, answer is yes.
but …
a) Apple claims , aic is non-lossy intermediate codec. working with proRes in FCPX taught me, there are even less non-lossy-ness codecs
b) iM offers an Archive feature, which is basically a simple Finder/copy operation which 'clones' your SDcards content into some folder on your harddrive; e.g. you can later use these untouched 'raws' in another editor such as FCPX. so, answer is no.
c) when you 'override' the import routines by manually re-wrapping mts into a mov container, iM handles the 'native' h264s ... so, answer is no.
d) adding any effect, transition etc. reduces any interlaced source to 540p. (if you're working with 720p source, res is kept) … so, answer is yes. or, in 720p case, no.
< Johnny Depp's voice >… savvy?
Does iMovie support HD 1080p @ 60 fps?
via Import from Camera? No.
via re-wrapped mts>>mov? I was told yes, some say no.
one thing to be kept in mind when talking about these 'issues':
iM, this 12€, is meant as a CONSUMER toy tool.
it supports AVCHD vers1 (=no 1080/60p, no >24Mbps, no 3D).
fingers crossed, we'll see soon some iM/QT/FCPX update for support of AVCHD v2 ........
the main consumer devices are within the specs, iM supports.
using professional equipments makes usage of professional software (FCPX, AP) optional.
sorry for lengthy answer.

HT204053 I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized. Any suggestions?

I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
Any suggestions?

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

Dreamweaver does not allow me to edit the editable region

Oh my, I'm so desperate in this, I have a .dwt and have set up the editable region as well. When I want to make a new html file from the said template dreamweaver does not allow me to edit it. I mean, all the code is completely grayed out as if the template itself is locked by default.
What I want to do is to create several new pages such as new albums, charts, genres, contacts (which all based on the home template) The home template itself has slider in its body. For the new html files I'm about to create (which I'm so desperate why I can't do so) I want the header and footer to remain the same.
Here is an image of my index.dwt (my homepage) anything inside the red frame is what I want to edit for new albums, charts, genres, contacts, login page, etc. The top part is the header and the bottom one is the footer (Excuse the right image, I'm working on dual screen)
Any help will be appreciated!
Sorry for my english

Hello SeptianNugraha,
here some hints concerning while handling templates (I quote):
The main principle of DW Templates is:
Non-editable regions = propagate to all child pages. The content of non-edtable regions is identical on all child pages. When you edit a non-editable region, DW propagates all changes to all child pages.
Editable regions = do not propagate because they're unique to every child page. The whole idea of editable regions is that they contain page specific content which does not appear on any other child page.
And:
PART 1
1. Create a prototype page with all the sitewide elements (common header, footer, sidebar, etc..) that you will need for your entire project. This requires some careful pre-planning even for small web sites.
2. Validate your code & test this prototype page in all major browsers. 3. When you're completely satisfied with your layout, SaveAs Template. DW will save this as a .dwt file in a site folder called Templates.
4. DW will ask you to add Editable Regions for stuff that will change from page to page. Do this and SAVE.
5. Close your Template.dwt file.
PART 2
1. File > New Page > from Template. Select the template you wish to use. Hit OK.
2. This is a child page. You can only edit content within editable regions. Everything else is locked.
3. SaveAs index.html (your home page) to the root in your local site folder.
PART 3
Repeat PART 2 for each additional page required.
PART 4
1. Open your main TEMPLATE file and add a navigation menu with links to your site pages.2. SAVE.3. DW will ask if you want to populate changes to child pages. Hit yes.
4. Publish all site pages to your server.
PART 5
If you should ever need to edit your TEMPLATE .dwt file, Repeat PART 4.
Good luck!
Hans-Günter

What is the last resort if Adobe DNG PE still does not allow to increase WB adjustment range ?

what is the last resort if even Adobe DNG Profile Editor still does not allow to increase WB adjustment range sufficiently (through modified .dcp profile) ?
the raw file in question = https://app.box.com/s/yyd43xq29cdsu2mvyp5w
thx.

You can use the curves to further shift the color.

Purchased Acrobat XI Pro - was able to edit text and add text and now does not allow me to do anything -

was able to edit text and add text and now does not allow me to do anything - Except purchase the software again.Can't find an answer to this anywhere.

Use Adobe Acrobat, not Adobe Reader.

'Master Options' for editing a master spread does not allow me to edit it.

I am trying to create various masters to a documents based on the original A Master.
instructions on InDeign Help, I selected the master I wish to edit,.
selected "Master Options' but it does not allow me to edit the new B master.
WTF?

The reason for basing one master on another is that they need to have the same content on both masters, with other non-shared content on one or more. It makes sense most times to start with a Master page that contains only the shared content.

ICal does not allow me to edit "minutes" in the appointments. when i make an appointment it defaults it to xxhrs 08mins (example 16:08) how can i make an appointment for 16:00 or 15:30 hrs ...etc.

iCal does not allow me to edit "minutes" in the appointments. when i make an appointment it defaults it to xxhrs 08mins (example 16:08) how can i make an appointment for 16:00 or 15:30 hrs ...etc.

Hi,
You can change this in System Preferences, Language & Text.
Go to System Preferences > Language & Text > Formats tab and change where it says Custom to your location. Then re-open iCal.
Let us know how it goes.
Best wishes
John M

Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI

Hello All,
We are unable to make PGI for Sales Order 2066904/10 because of wrong Serial Number Status.
Delivery note was created on the 22.12.2012 and then due to errors deleted on 27.12.2012.
Problem is that now we need to do PGI but Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI with Serial Number Status ESTO.
These 8 products are in Stock and available for this Sales Order, one of the Serial Numbers is with OK Status
8115001012
8115001057
8115001058
8115001079
8115001081 with OK status
8115001180
8115001181
8115001690
Please let us know how to correct the problem so we could do PGI for this Order?
This scenario is not replicable in RST(Quality System)
Our Findings:
** 1. We have tried IQ02>Edit>Special Serial No Functions>Manual Transactions>To Stock, But it still do not remove EDEL.
2. Is it suggestible to use T Code BS22 and thereby change PMS8 to Warning? I am not sure regarding this since this a SAP managed Table
Your help is highly obliged......This is very urgent..........
Regards,
Anirban
SD Consultant

Hi,
I have encountered same issue today and here is the solution:
1. Manually changed the status from EDEL/ESTO to ECUS
Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Customer", then save.
2. Once status is in ECUS, change the serial number status back to ESTO.
Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Stock", then save.
After doing the 2 steps above, you should be able to do PGI using the serial number.
Kindly advise if it works for you.
Regards,
Vhanie

Voice over does not allow me to open locked screen

voice over does not allow me to open locked screen iPhone 6
<Subject Edited by Host>

Use two taps wherever you would use one tap. Navigate to Settings/General/Accessibility and turn it off.

I had Acrobat XI Pro Trial installed on W8.1, and I had to uninstall it because issues with MS Office 2010. Now I try to reinstall Acrobat and It does not allow me to use the trial version anymore even it was not over. What to do??

Well, I had installed in my new computer a trial version from Acrobat XI Pro, but I had issues with Microsoft Word 2010, since it did not allow me to save changes on my file. I uninstalled it from my computer before the trial period was over, and then, after I solved the issue with Office, I wanted to get it back for a time, but the installer does not allow me to choose Trial Version. I can reach that screen where you choose between key and trial, but once I press trial and click on next, it does absolutely nothing at all.
I have tried to manually delete folders, and I even used CC Clean to make a registry set up, but nothing out of that is working for me at all, and it keeps happening. I have no really idea what to do, and I kinda need to use Acrobat immediately for a file.

The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying. How can I fix this error so I can send emails.

The issue definitely sounds like your Outgoing/SMTP settings need to be changed. Simply set them to the proper settings for your provider as was suggested above.
I found this link for Knology: http://support.knology.net/content/email.setup.cfm
The SMTP settings can be edited on the iPad/iPhone by going to Settings--> Mail, Contacts, Calendars, edit the account having trouble, click the Account, then at the bottom is the SMTP server info, click on it to edit it further.
It should allow you to edit the primary smtp server and let you enter all the good stuff as you see in the Knology link above.
Some providers require you to register your account on their service like AT&T.

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

ScatterGraph does not allow manually editing axis range at runtime

Similar Messages

Maybe you are looking for