Scenario R/3------ client PI-------- Server PI------ File

Please find the below scenario
R/3---->client PI>Server PI---->File
1)Here client PI will send the data to server PI through the HTTPS.
2)while sending the data from client PI,client PI will apply sign and encrypt options in the Receiver Aggrement by enabling the select security profile at client PI end.
3)But at server PI without applying the decryption and validate options in the Sender aggrement (without enabling the select security profile option), server PI able to receiving the data.
4)Here at client PI side sign/encrypt means ,are we applying the sign/encryption for data
5)At server PI side also,have to apply the decrypt/validate for data
6)what is the use of Select security profile
7)How to apply the message security level
Request you to all,could you through some light on the above points.
Thanks in advance,
AVR

Hi AVR,
Can you kindly share the procedure/steps you followed to enable Message level security ?
Regards,
Suresh S

Similar Messages

Client to Server upload: File size limit

Hi,
I am utilising java sockets to set up 2 way communication between a client and server program.
I have successfully transferred files from the client to the server by writing/using the code shown below.
However I now wish to place a limit on the size of any file that a user can transfer
to the server. I think a file size limit of 1 megabyte would be ideal. Does anyone know a straightforward
way to implement this restriction (without having to perform major modification to the code below)?
Thanks for your help.
*****Extract from Client.java******
if (control.equals("2"))
     control="STOR";
     System.out.print("Enter relevant file name to be sent to server:");
     String nameOfFile = current.readLine(); //Read in the name of the file to be sent, store in a
addLog("File name to be sent to server: " +nameOfFile);
     if(checkExists(nameOfFile)) //Call the checkExists method to make sure the user is sending a
     infoOuputStream.writeUTF(control);
     infoOuputStream.writeUTF(nameOfFile); //write the file name out to the socket
     OutputStream out = projSocket.getOutputStream(); //open an output stream to send the data
     sendFile(nameOfFile,out);
     addLog("File has been sent to server " +nameOfFile );
     else
          System.out.println("Error: The file is invalid or does not exist");
          addLog(" The user has attempted to send a file that does not exist" +nameOfFile);
private static void sendFile ( String file, OutputStream output ) {
try {
          FileInputStream input = new FileInputStream ( file );
int value = input.read();
while ( value != -1 ) {
output.write ( value );
value = input.read();
output.flush();
catch ( Exception ex ) {
*****Extract from Server.java******
if (incoming.equals("STOR"))
          String filename = iStream.readUTF(); //read in the string object (filename)
          InputStream in = projSock.getInputStream();
          handleFile ( in, filename ); //read in the file itself
     addLog("File successfully sent to server: " +filename); //Record the send event in the log file
          System.out.println("Send Operation Successful: " + filename);
private static void handleFile ( InputStream input, String file ) {
try {
          FileOutputStream output = new FileOutputStream ( file );
int value = input.read();
while ( value != -1 ) {
output.write ( value );
value = input.read();
output.flush();
catch ( Exception ex ) {

Thanks for the advice. Have it working perfectly nowGlad it helped. You have no idea how refreshing it is that you didn't respond with, "Can you send me the code?" Nice to see there are still folk posting here who can figure out how to make things work with just a pointer or two...
Grant

Help!!!! copy a file of client at server

Must copy a file of client at server, write code plsql. Exist of the instruction at concern.....
thanks
Giovanni
P.S. excuse for write english evil!!!
email: [email protected]

This is a hello!. Please do not post the same question more than once. It makes the threads hard to follow.
Your future co-operation is appreciated.
Cheers, APC

Transfer file from client to server using http

HI friends,
I want to transfer files from client to server...I tried that with the help of socket and rmi..........
But Http is only the best mechanism for my application..........
Without using servlets, how to transfer files with the help of http.....
Any help would be appreciated.......

Google is your friend, and appearently www.jguru.com also:
http://www.jguru.com/faq/view.jsp?EID=160

Exchange 2013 - Cleaning UP logs files (Client Access Server)

I have to client access server and it is running out of space
Is there anywhere in the C:\ drive where I can delete some space (e.g. log files)

Hello,
If you refer to C:\inetpub\logs\LogFiles, you can delete them manually or use a Powershell script to delete them.
Here is the similar thread for your reference.
http://social.technet.microsoft.com/Forums/exchange/en-US/703dc324-721e-4c52-b43a-263b5543cfda/how-to-control-iis-logs-on-cas-server?forum=exchange2010
If you refer to other log files, please free let me know.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Java.rmi.server.codebase=file:(?????); at client side: classnotfounexceptio

I'm trying to run an RMI application (under Windows XP, one machine for client and server) like this:
at server side:
java -Djava.rmi.server.codebase=file://\..\..\..\j\ -Djava.security.policy=file:.\polityka.txt sss
- and it works fine, but at client side:
java -Djava.security.policy=file:.\polityka.txt -Djava.rmi.server.codebase=file://\..\..\..\j\ kkk
results in:
Exception in thread "main" java.lang.NoClassDefFoundError: PrzykladowaKlasa
at kkk.main(kkk.java:31)
when I'm listing directory (at client side) got with System.getProperty("java.rmi.server.codebase") i get this
file://\..\..\..\j\
OdleglaKlasa_Stub.class
PrzykladowaKlasa.class
Folder Structure is:
|------j\
| |------(*_Stub.class, and ClassNeededByClient.class)
|------2\
| |------Server\
| | |------(serwer files)
| |------Klient\
| | |------(klient files)
I'm fresh in RMI and Codebase poperty, but with some exp with Java...
(policy files are allright - grant {permission java.security.AllPermission;};)
Any help will be appreciated.

I've come back to this issue again (since I am moving code around to different systems again). Using linux I can use -Djava.rmi.server.codebase=file://$PWD/build/
Presumably there is a similar command in WIndows.

How to Serialize a file path from client to server?

I am using serializing concepts in java. I am stuck, that how can i send only file path from client to server?

Um, ill take a wild guess and say that youre trying to
access a file on another computer using that path?
That wont work.
What could the other computer possible do
with that path unless both computers are networked to a
common drive, or if they are networked to each other in a way
where the root in the file path would point to the same place
on either computer?

Urgent - Upload a file from Client to Server.

Need to load a file from the client machine to the Server running 9iAS Rel. 1 on a HP Unix Machine.
We are using Forms 6i. We have looked into the File Upload Utility demo code provided with Forms 6i - but have been unsuccessful in reusing it. PLS HELP

Duplicate post.
Upload a file from client to server by forms in E-Bussiness Suite R12
Re: Upload a file from client to server by forms in E-Bussiness Suite R12.

Communication between two jvm (client and server)

Hi ,
   I want to access the UME service of the SAP J2EE Container using a stanalone client application.
So the client would be running on remote JVM.
Here we use the JNDI service to communicate between the client and server.
p.put(Context.INITIAL_CONTEXT_FACTORY,"com.sap.engine.services.jndi.InitialContextFactoryImpl");
                    p.put(Context.PROVIDER_URL, providerURL.trim());
                    p.put(Context.SECURITY_PRINCIPAL, securityPrinciple.trim());
                    p.put(Context.SECURITY_CREDENTIALS, securityCredentials.trim());
                    Context ctx = (Context) new InitialContext(p);
                    Object objRef = ctx.lookup(ejbName.trim());
I want to know that is the communication between the client and server secured in this scenario
Best Regards
Manoj

Okay, the client and server VMs are different implementations of the Hotspot engine. Hotspot basically takes the Java bytecode from your .class files and turns it into native machine instructions at runtime. (The optimizations are actually much more complex than that, but that's the basic concept.)
The client VM is so named because it's designed to be used for GUI-type applications interacting with the user. It is designed to have a quicker startup and smaller memory footprint.
The server VM uses more memory and is typically slower at starting up than the client VM, but can often perform ridiculously fast. This of course depends completely on the particular code being run, and you should probably profile and see which VM works better for your application.
Some interesting optimizations are performed by the 1.4.1 server VM, such as: removal of array-bounds checks (when it determines that the index can't become out of bounds), inlining of methods, and more.
Here is a link to more info if you're interested:
http://java.sun.com/products/hotspot/docs/whitepaper/Java_HotSpot_WP_Final_4_30_01.html

Communication between client and server

I am using sockets for communication between the client and the server. is there any other way that i can use for communication between the client and server???

Plenty of ways: JMS, SOAP, RMI, a RESTful API, writing-files-to-a-shared-directory-on-the-disk, Sneakernet, ...
Some of them use sockets (or better TCP/IP) as the underlying protocol.
But to give you a good answer, you would have to tell us why you want a different way. I hope you're not searching for a different way just for the sake of being different.

Scenario or adapter to sending a text file to different target directories

Hi experts
In XI 3.0 I have developed a file2file scenario that takes a comma-separated file (*.csv) and converts it and returns a text file that is sent to a specific directory, the name input file determines the Target Directory, for each input file there is a sender channel and receiver channel that put the output file in the Target Directory. The problem is that i have many channels and not know how to make only one sender channel which takes the input file and the receiver channel to sends the output file to the destination directory through the file name. e.g. VTAS03.csv file located in target directory //work becomes in Clients.txt file in the directory //sap03 ie //work/VTAS03.csv --> //sap03/Clients.txt while the file VTAS05.csv must go to the directory //sap05 i.e. //work/VTAS05.csv --> //sap05/Clients.txt, //work/VTAS07.csv --> //sap07/Clients.txt so on.
In short the output file name is the same for all but must go to different directories according to the input file name without using as many channels of communication.
Someone can help me or tell me how to do this?
Thanks

Liz,
Please use the below steps if you are considering of using mapping program.
Select the check boxes for the following Adapter Specific Message attributes in
Sender Channel - FILE
Receiver Channel - DIRECTORY
Put the file name as Clients.txt in receiver channel , and directory name can be anything like TEST
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    "http://sap.com/xi/XI/System/File",
    "Directory");
DynamicConfigurationKey key1 = DynamicConfigurationKey.create(
    "http://sap.com/xi/XI/System/File",
    "FileName");
String temp = conf.get(key1);
String src_filname = temp.substring(4,5) //This is used to get the last two digit value from the file name
String tar_dir = "//sap"+src_filename+"/";
conf.put(key,tar_dir);
return "";
I hope the above suggestion solves your problem!
Thanks!

Connecting to a local SQL server .mdf file

Hi all,
In doing some prototyping of my database I started working with a local copy of an SQL Server database since it so conveniently integrated with the Visual Studio .NET tools I use. Now that I have spent far too much time working on a local prototype, I would very much like to migrate it to our in-house database rather than rewrite the whole thing (it is quite large in terms of tables and constraints and none of our in-house tools generate code from ER diagrams).
Seeing that SQL Developer had a migration utility I pounced at a chance to use it. I installed it as well as the recommended JDBC driver; however, it occurs to me that I have no idea how to connect to a local database file using the host name and port fields given to me. Is there some convenient way to configure SQL Server 2005 to forward this file to some kind of local host? Or is there any other driver for use with a local .mdf file? Help would be greatly appreciated.

While it does come with a copy of SQL Server with it, visual studio suspiciously just asks for a file name, so I would assume it reads directly from the .mdf
I have a copy of SQL Server 05 on the machine, but I haven't done anything in the way of server side configuration before, so I can't even guess how to direct it to serve the file.
All software packages involved are:
Windows XP
SQL Server 2005
Visual Studio .NET 2005
SQL Developer 1.5.1
Oracle client 10g connecting to an Oracle 9i release 2 server
Any pointers to the right direction or alternate migration solutions would be great.
Edit: I am highly suspicious that Visual Studio was connecting to this file through SQL Server Express and not my standard edition copy, and it is therefore not attached to the database, the solution is not looking entirely easy, so an alternate migration may be a better choice. Thanks in advance for any help.
Edit: Well my suspicions were confirmed. I attempted several solutions. First of which being the MS SQL Express publishing wizard so that I could publish to SQL and run the script via Toad or SQL Plus; however, it only targets MS SQL Server 2000 or 2005 which would result in a lot of hand editing in terms of migration. Attempting to find a script converter did not help as they all either failed outright or demanded a connection to the datbase via ODBC or JDBC (which doesn't support SQL Express' less than clever attach on connection ideas). This led me to the alternate solution of trying to attach the file to my main database and connect to it; however, the SQL Server command prompt has some sort of permissions issue with my office security setting (though I can edit files fine) and results in failure.
I think it is about time to throw in the towel and just work it out by hand. This would be greatly expedited by any visual database tools that generate code from ER diagrams if you happen to know of a freeware solution. We lack an internal copy of Oracle Designer and the free license only permits a single prototype. So any suggestions on the front of freebie visual object relational tools and alternate migration ideas would be of great help. Until then I'll be grinding through it with moderate dissatisfaction.
Thanks again.

Configure client and server

Hi ,
Iam trying to configure client and server on OEL5.5 on vmware server i ahve 2 virtual machines which are on network i want to make one machine as server and another as client so on server machine i have a database called as SERVER and iam creating a listerner for it and my listener is created i chked my listener.ora files but on termianal when i execute
LSNRCTL> STATUS LISTENER1
TNS-01101: Could not find service name
LSNRCTL>
LSNRCTL> START LISTENER1
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener1.log
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oracle10g.home.com)(PORT=2525)))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
Linux Error: 98: Address already in use
Listener failed to start. See the error message(s) above...
and copying and pasting the contents of listener.ora file
# listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle10g.home.com)(PORT = 2525))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
SID_LIST_LISTENER1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = server)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(SID_NAME = server)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle10g.home.com)(PORT = 1521))
so as there is only 2 listeners on my machine named as listener which listens at 1521(default) and another which i created listener2 listens as 2525
so please help me and let me know where iam going wrong
Thanks in advance ....
with Regards
Kavita

user12665759 wrote:
Hi ,
Iam trying to configure client and server on OEL5.5 on vmware server i ahve 2 virtual machines which are on network i want to make one machine as server and another as client so on server machine i have a database called as SERVER and iam creating a listerner for it and my listener is created i chked my listener.ora files but on termianal when i execute
LSNRCTL> STATUS LISTENER1
TNS-01101: Could not find service name
LSNRCTL>
LSNRCTL> START LISTENER1
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener1.log
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oracle10g.home.com)(PORT=2525)))
TNS-12542: TNS:address already in useThose last two lines tell the tale. Something else is running on port 2525. Why are you trying to use that port for your listener?
Use netstat to find out what process is using the port.
And as a follow-up, why configure two listeners?
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
Linux Error: 98: Address already in use
Listener failed to start. See the error message(s) above...
and copying and pasting the contents of listener.ora file
# listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle10g.home.com)(PORT = 2525))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
SID_LIST_LISTENER1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = server)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(SID_NAME = server)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle10g.home.com)(PORT = 1521))
so as there is only 2 listeners on my machine named as listener which listens at 1521(default) and another which i created listener2 listens as 2525
so please help me and let me know where iam going wrong
Thanks in advance ....
with Regards
Kavita

Socket communication between client and server

Hi all,
I am doing an assignment for communication between java client and java server using sockets. This communication is in the form of XML documents. I am facing a problem in this communication.
Actually at Server side I'm creating an XML document(Document type object) using DocumentBuilderFactory in javax.xml.parsers package and transforming this Document into a stream using StreamResult.
My code is :
Transformer xmlTransformer = TransformerFactory.newInstance().newTransformer();
StreamResult xmlString = new StreamResult(currentClientHandler.getSocketOutputStream());
DOMSource xmlDocSource = new DOMSource(xmlDocument); // xmlDocument is Document type reference
xmlTransformer.transform(xmlDocSource, xmlString);
so, this xmlString(i.e. StreamResult) is passed directly into the output stream. Here I need to close() output stream after transform() call to help SAX parser to know about end of stream.
Now at Client side, I am parsing this stream using SAX parser. It parses this correctly. But when sending some another data back to Server when client opens output stream, it given Socket closed exception. I know that closing input or output stream closes socket. But in my problem, I have to send data in streams and not by using files or byte[] etc.
So what is nearest solution to problem ??
Plz help me. Any kind of help will be greatly appreciated.

hi
thanks for ur reply.
I didnt get any error msg while getting the back the datas.
Actually i divided my application into two parts.
My application will act as both server and client.
server ll get the browser request and send to the client and the client will send that data to the c++ server.
Im able to do that.and unable to get the data from server.
Didnt get any error.
can u tell me how to make an application to act as both client and server.
I think im wrong in that part.
thanks a lot

How to deploy Forms, Reports and Menu from Client to Server machine

Dear Experts,
I have one requirement to deploy the Forms, Reports and Menu from client machine to server machine.
Deployment involves the following steps :
1. Firstly we have to search the selected file in a folder where the .fmx is present ( in Server machine) and take the back up of the the existing file in the server (Source and destination paths will be available).
Ex. If the existing FMB name is TEST.fmx then the backup file should be TEST_sysdate.fmx.
2. Secondly we have to transfer the file from the client folder (or from another folder of the same server) to the server folder where the back up exists.
Please help me to search/rename/copy/replace the _.fmx/.rdf/.rep/.mmx_ files from client to server.
We are using
9i Database.
10g Forms and reports.
SQL Developer tool.
OS is Windows (Client and Server).
Help me out to attach a file of front end screen which we are planning to develop. It will give a clear picture on this requirement.
Thanks :)
Edited by: 941175 on Jun 17, 2012 9:09 AM
Edited by: 941175 on Jun 17, 2012 9:12 AM
Edited by: 941175 on Jun 17, 2012 9:14 AM

941175
Welcome to the forum. Please take a while to go through the FAQ to be found to the top right of the page.
Your issue is more to do with batch files rather than Forms. The only relation with Forms, as I see it, is that you will be using HOST/CLIENT_HOST to start a batch file with the file name to be deployed as a parameter passed to it.
You need to rewrite either a CMD batch file or a Powershell script to achieve what have set out to do.
For CMD batch files look up http://www.robvanderwoude.com/battech.php , or any of the other excellent resources available on the internet.
Regards,

Scenario R/3------ client PI-------- Server PI------ File

Similar Messages

Maybe you are looking for