Screen Exit for MM01 Material Creation

Hi,
The requirement is to add 2 new field in the Material Creation transaction (MM01) in the General Plant / Storage Location View.
I was trying to find the Screen exit in the MGA Package but there was no screen exit for material. So, i tried by SPRO- IMG, iam able to attach my designed screen and its viewable in MM01 but the data is not being updated in the relevant table for the custom fields (The custom fields are appended in the MARC table).
So, can you please help me about the coding part for the updation of the custom field data.
Thanx

Hi,
Check these:
MGA00001 - Material Master (Industry): Checks
and Enhancements
MGA00002 - Material Master (Industry): Number
Assignment
MGA00003 - Material Master (Industry and
Retail): Number Display
Check with 'BADI_MATERIAL_REF'
Refer
http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
https://forums.sdn.sap.com/click.jspa?searchID=7217830&messageID=3313524
Regards
Kiran

Similar Messages

Screen-exit for profit center creation - transaction KE51.

Hi All,
Background: The client has the requirement of importing profit centre master data from legacy system into SAP ECC system. Few of the legacy data could not be filled into existing sap fields, hence the requirement has been to populate the data into custom fields.
The client also has the requirement, that the same fields are required during online entry. For this we need to enhance the profit centre creation screen (transaction code KE51) with two additional custom fields.
Requirement: To enhance profit centre creation screen with custom fields. Screen-exit for KE51 transaction.
Pre-work: Program SAPLRKPM in SAP ECC system is the main program. It does not have any screen or sub screen area for custom fields addition. Debugged the program to check for screen-exits, found none.
Below user-exits are not either screen-exits or cannot be used for enhancing profit center screen.
PCA00001 EC-PCA: Document changes for data transfer
PCA00002 Profit Center Accounting: derivation of representative mat.
PCA00003 Derive Partner Profit Center for External Deliveries
PCA00004 Check valuation for invoice verification with transfer price
PCA00005 Check valuation for invoice verification with transfer price
PCASELEK EC-PCA: Selection criteria for data transfer
Solution required for: Could anyone please let me know if it is possible to enhance the profit center creation screen. If yes, please provide the names of the screen-exit/ badi exit.
(Just a thought, modifying the standard seems to be the only solution, this should be the last option and i agree, please provide your inputs.)
Thanks in advance.
Warm Regards,
Goutham.

Thank you Manohar for the response.
The requirement is to display custom fields on standard sap screen and there are no screen-exits. So, i suppose the standard screen has to be modified.
Could you please provide brief explanation on
May be you should consider maintaining custom mapping table instead of going for chaning standard.
With Regards,
Goutham.

Screen exits for MM01 Tcode

Hi Folks,
          I am doing some enhancements for MM01 Tcode.we need to add new screens to MM01. could any one tell me the available screen exits or BADI' s for tcode MM01. thnx in advance.
                santosh.

Hi,
Check these:
MGA00001 - Material Master (Industry): Checks
and Enhancements
MGA00002 - Material Master (Industry): Number
Assignment
MGA00003 - Material Master (Industry and
Retail): Number Display
Check with 'BADI_MATERIAL_REF'
    Refer
http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
https://forums.sdn.sap.com/click.jspa?searchID=7217830&messageID=3313524
Regards

Screen exit for MM01 to add additional fields to basic data tab .

Hi All ,
We are working on the SAP version ECC 5.0 . Our requirement is to add additional fields to the general data section of the basic data1 tab for the tcode MM01 . I have gone through many previous queries in SDN but not able to figure out what exactly the process should be . All I could figure out is to start the process from appending the structure to MARA for the additional fields . Then follow the steps in the SPRO .
Define Structure of Data Screens for Each Screen Sequence
Assign Secondary Screens
Maintain Order of Main and Additional Screens
Assign Screen Sequences to User/Material Type/Transaction/In
Define How Maintenance Statuses Are Determined in Data Trans
Create Program for Customized Subscreens
I am not able to comprehend what we are trying to do in these steps .
Can anyone explain me in detail what we are trying to do in the whole process ?
Thanks ,
Varun .

Hi varun,
Create the append structure on the MARA table.
The SAP note 44410 describes how to add the new fields to the screen and how the updating will work.
1.     Make a copy of function group MGD1to ZMGDI as stated inthe Ossnote using program COPYMGDI.
2.             Goto Se38 enter program name SAPLZMGDI Click Display and goto> program-> other object---> enter screen number '0001' and add your fields to the subscreen which should apper on the the general data section of the basic data1 tab for the tcode MM01
2.     Make the changes stated in SAP Note.
3.     After make the changes the functional analyst will need to make some configuration changes.
4.     SPRO -> Logistic General -> Material Master -> Configuring Materal Master -> Define Structure of Data Screens Sequence.
5.     Select SSq = 21 then click on Subscreens select Basic DATA1
6.     Enter in the new screens that were built
7.     Change the row that was create putting in the program (function group program) that was created in step 2.
Thanks and regards,
Pavankumar

BDC for MM01(Material creation)

Hello Please anybody send me code for creating materials with reference to reference material and plant in sselection screen in version ECC 6.0?
My selection screen will be::
Reference material: Plant:

Plz User <b>BAPI_MATERIAL_SAVEDATA</b>
Why So :
you will never get it to work correctly in all cases every time for all material types, it is just much easier to work with an API that is not screen dependent. Then you don't have to worry about all of the exceptions when dealing with certain material types, and such. For example, say you have a material which you want to update the po text, and you did your recording for another material, which didn't have a specific view, so now when doing BDC for this material, the screen where you select the view you want to process, may be in a different place in the table control, see what I'm getting at? Its just very much easier to work with BAPIs and is suggest to use BAPI over BDC whenever possible.
Also still u want to go for it, check this code :
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
All things r available in SDN, please search.
Reward points if useful.
Thanks
vinsee

Screen Exit for MM01

Hi,
I need an user exit that will enable me to default some of the fields on the MM01 transaction while creating a material.
The user requirement is... Whenever we create a material using another material as template (copy from material) the Material Price Group (MVKE-KONDM) should NOT be copied from the reference material AND it should be defaulted to a value based on some business logic.
Need an user-exit or BADI where it is possible to put these logic.
Regards,
Milan

Hi Rishi,
Thanks for replying. I have already tried this exit but the problem is we can change only fields in CMARA structure (TYPE MARU) through this user exit.
I tried modifying the KONDM field in WMVKE structure but this does not get updated in the table.
Did I miss something?
Regards,
Milan

Implement screen exit for MM01

Hello all,
I follow the instructions from the link below for adding a new tab for MM02-MM03 tcodes.
<link to blocked site removed by moderator>
I added the tab and i created the screens but now i want to fill my tab with values from mvke table and i need to use values ( vkorg werks vtweg )which i entered on the organization level selection screen.
On MM02, On the first screen i enter matnr then i select my new tab view, then i enter ( vkorg werks vtweg ) values for organization levels.
Now i need these ( vkorg werks vtweg ) organization level values in my new tab but i cant get them. I tried get parameters but it is only working for matnr. Not these parameters. How can i get them any ideas? All global tables are empty in my tab.
Edited by: aydnbk on Oct 6, 2011 10:48 AM
Edited by: Thomas Zloch on Oct 6, 2011 8:36 PM

I managed to do it by using badi BADI_MATERIAL_OD

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

Screen Exit for MI01 and LI01N

Hi,
I need a screen exit for MI01 and LI01N. Please reply ASAP

Hi Nishu,
For MI01 below are the exits:-
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MB_CF001 Customer function exit for update of material document
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read From RESB and RKPF For Print List in MB26
MBCFC003 Maintenance of batch master data for goods movements
MBCFC004 Maintenance of batch specifications for goods movements
For LI01N :-
MWM2S001 Exit to Determine 2-Step Picking Characteristic
MWMBAP01 Enhancement for BAPI WarehouseTransOrder.GetDetail
MWMBAP02 Enhancement for BAPI WarehouseStock.GetDetail
MWMD0001 Transfer order print via RLVSDR40
MWMD0002 Transfer order print as multiple process with RLKOMM40
MWMIDI07 Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11 Enhancement for message WMTORD: TO with several items
MWMIDO12 Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13 Extension for WMMBXY (subsequent tasks after goods movement)
MWMPP001 Enhancement WM/PP Interface (automatic TR generation)
MWMRF001 RF: Influence Display of material description
MWMRF100 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0100)
MWMRF101 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0101)
MWMRF102 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0102)
MWMRF104 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0104)
MWMRF105 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0105)
MWMRF106 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0106)
MWMRF107 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0107)
MWMRF108 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0108)
MWMRF151 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0151)
MWMRF152 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0152)
MWMRF153 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0153)
MWMRF170 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0170)
MWMRF202 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
MWMRF203 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0203)
MWMRF204 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0204)
MWMRF205 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0205)
MWMRF212 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0212)
MWMRF213 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0213)
MWMRF221 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0221)
MWMRF302 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0302)
MWMRF303 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0303)
MWMRF304 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0304)
MWMRF305 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0305)
MWMRF312 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0312)
MWMRF313 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0313)
MWMRF321 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0321)
MWMRF400 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0400)
MWMRF402 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0402)
MWMRF403 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0403)
MWMRF404 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0404)
MWMRF405 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0405)
MWMRF406 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0406)
MWMRF410 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0410)
MWMRF411 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0411
MWMRF412 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0412)
MWMRF502 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0502)
MWMRF503 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0503)
MWMRF504 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0504)
MWMRF505 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0505)
MWMRF600 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0600)
MWMRF601 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0601)
MWMRF630 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0630)
MWMRF631 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0631)
MWMRF632 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0632)
MWMRF633 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0633)
MWMRF634 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0634)
MWMRF650 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0650)
MWMRF651 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0651)
MWMRF700 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
MWMRF701 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0701)
MWMRF702 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
MWMRF703 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0703)
MWMRF704 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0704)
MWMRF705 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0705)
MWMRF760 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0760)
MWMRF761 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0761)
MWMRF762 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0762)
MWMRF763 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0763)
MWMRF764 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0764)
MWMRF765 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0765)
MWMRF766 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0766)
MWMRF767 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0767)
MWMRF768 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0768)
MWMRF769 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0769)
MWMRF777 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0777)
MWMRF800 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0800)
MWMRF801 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0801)
MWMRF802 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0802)
MWMRF803 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0803)
MWMRF804 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0804)
MWMRF805 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0805)
MWMRF806 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0806)
MWMRF807 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0807)
MWMRF888 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0888)
MWMRF889 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
MWMRF998 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0998)
MWMRF999 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0999)
MWMRFCOD Enhancement for function codedisabling
MWMRFDLV select delivery by user criteria
MWMRFPRT Enhancement for printing
MWMRFSSG user exit for sorting TOs in RF system-guided transaction
MWMRFUP Customer defined general purpose pushbutton called from scr.
MWMRP001 Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
MWMRP002 Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
MWMRP003 Customer Exit for Replenishment using RLLNACH1
MWMRP004 User Exit for Replenishment using RLLNACH4
MWMTO001 Enhancements for end of transfer order generation
MWMTO010 Exit: Calculation of Total Planned TO Processing Time
MWMTO011 Correction of Planned Processing Time for TO Item
MWMTO012 Correction of Sorting and Split Transfer Order
MWMTO013 Stock Removal for Sev. Storage Types as in Stringent FIFO
MWMTOAU3 Separate selection of posting changes for autom.TO creation
MWMTR001 Exits at the end of transfer rqmnt creation (IM,PP interf.)
Choose the approriate one which suits your requirement.
Hope it helps you.
Regards
Abhii...

Screen exit for transaction VA41

dear all,
i want to add two fields to the transaction code VA41 contract creation.can anybody tell me screen exit for this or else how to do it?
regards,
Debesh

Hi Debesh Tripathy,
In additional data A Tab you have some customer field than you can use it, if these fields don't match with you request you can add fields in Additional data B tab with help of ABAP, since you need to modify the screen the PBO and PAI 8459 of program SAPMV45A. Bear in mind this screen is also used by VA21 and VA01 so you need to put a conditional to doesn't show this field in these others transaction.
Thanks,
Mariano.

Screen Exit for LT12

Hi Folks,
I need a help regarding Screen Exit for LT12 Tcod.My requirement is to add a screen for Serial Number Keyin for a material and confirm the TO.I try to find an Exit and a Badi where i can put my Custom logic which updats the Serial Number in a Custom 'Z' Table but iam unable to stop at none of the exits .Please help me if any one had worked on this sort of an requirement. I want an Exit/Badi which stops at the time of Save or Confirm TO Ok_code

hi vamsi,
check the below link may be helpful for you
User-Exit in transaction LT12
if u find it useful plz reward the points
Regards,
Naveen

Screen exit for mi04 tcode

hi,
i need screen exit for mi04 tcode .

Hi Prabhakar,
Try these User Exit.
MB_CF001 Customer Function Exit in the Case of Updating a Mat. D
MBCF0002 Customer function exit: Segment text in material doc. i
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREA
MBCF0011 Read from RESB and RKPF for print list in MB26
Regards,
Vijay

Screen exit for FS00 transaction

Hi All,
My requirement is i need to provide a button in FS00 transaction to approve the GL Code. Can anyone suggest me screen exit for FS00 transaction.
Thanks,
Chitra.

Hi
You can find Exits and BADI from SPRO. Just identify the area where you want to enhance and go to that area by SPRO , then you can see system enhancement that are available. This is the good way to find enhancement because you can find the documentation related to enhancement.
Like SPRO > Material Management > Purchasing > Develop enhancement for purchasing (Exits)
or see Business add ins for purchasing. Read the documentation.
Else you can search exits and badi by the package name like find the package of a transaction where you want to put enhancement. SE93 > Transaction name > Display > Package.
then go to SE80 and open the package then see function group start with X. this are exits that are available. you can find enhancement also.
Else to find BADI related to a transaction just put break point to class method cl_exithandler->get_instance in SE24.
and run the transaction , then you can find the BADI as exit name in this function call.
These are the way you can find enhancement , but the way which is describe 1st is the best way.
hope it will solve ur problem.
Thanks

Exit for MM01...Before Views Selection.

Hi Gurus,
My requirement is i need to find an Exit for MM01. Here when i try to create a new material by copying one existing material i get the views. Now if i dont select basic data view and directly go to any other view then the exit trigger it specifying that basic data needs to be filled.
Thanks in advance.

Hi Abhishek,
Just check the following user exits for MM01:
Exit Name           Description
MGA00001            Material Master (Industry): Checks and Enhancements
MGA00002            Material Master (Industry): Number Assignment
MGA00003            Material Master (Industry and Retail): Number Display
Hope this will help you...

BAdI/User Exit for MM01

Hi All,
I am looking for a User Exit for MM01
I need to catpure the Document data in MM01>Additional data>Document data tab
I checked with the following enchancements but no use
MGA00001
MGA00002
MGA00003
BADI_Material_Check.
Can any one help me in finding the suitable enhancemet?
Thanks
Bhasker

Hi Bhasker
Go to Se18 Tcode
and give the definition name is "DOCUMENT_MAIN01"
check the definition in display mode because it is Sap Standard Definition.
there you will find a "TYPE" Tab
under this you have two check boxes
<b>1) Multiple Use</b>
2) Filter-Depend
if you want multiple implementations check this Check box
after this you need to create a request and the system asks Access Key for Changes
for that you will catch that Key from your Basis Team.
Regards
Sreeni

Screen Exit for MM01 Material Creation

Similar Messages

Maybe you are looking for