Screen is white any idea why

My MacBooks screen is white , it shut down and the.bottom is hot did my hard drive get damaged?

Hi,
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Cheers,
Jason H.

Similar Messages

I had greyed out wifi, looked on the net how to fix it and it said to use a hairdryer which worked it greyed out again 5 mins after, so i did it again this happened 3 times then the 4th time the screen went white any ideas whats happned an how to fix it?

i had greyed out wifi on my iphone 4s, looked on the net how to fix it and it said to use a hairdryer which worked it greyed out again 5 mins after, so i did it again this happened 3 times then the 4th time the screen went white any ideas whats happned an how to fix it?

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

My daughters iPhone is frozen with the apple showing on the screen. We have turned it on and off but it is still stuck on that screen. Any ideas why or how to correct this?

My daughters iphone4 is frozen to a blank screen with the apple on it. We have turned it on and off and it still remains on this screen. We cannot access gef phone at all. Any idea why this is happening or how to correct?

connect it to the computer/itunes you normally do.

My iphone 4 lock screen/power button is not working, nothing spilled on it and not dropped, any idea why the button won't work?

My iphone 4 lock screen/power button just stopped working. nothing spilled on it and not been dropped. Any idea why it stopped working?

Kat Goddess wrote:
Any idea why it stopped working?
I have no idea why it stopped working. But why it failed does not matter.
Take it to an Apple Store or Authorized Apple Repair Center and have it assessed and see what it would take to get it working.

I have iPhone 5 IOS 8.1.2; for past 13 weeks I get message that my phone has not backed up on the cloud. Every night however the wifi is on, phone is connected to power, and screen is locked. Any idea why back-up is not happening ?

I have an iPhone 5 IOS 8.1.2;
for the past 13 weeks I get the message that "this phone has not been backed up on the cloud". However, every night it is connected to wifi, phone is connected to power, and the screen is locked. Any idea why back-up is not happening ? By the way, I do not have the "back up now" option in Setting / iCloud.. Help anyone ?

Try deleting an other icloud backup and see if it will automatically backup.

My macbook pro 10.6.8 desktop as started twitching on the far right side of the screen whether the internet is on or off. Any ideas why and how can i solve it?

My macbook pro 10.6.8 desktop has started twitching on the far right side of the screen whether the internet is on or off. Ie the folders on that side flicker/twitch or if I'm on the internet the far right edge of the page will flicker/twitch Any ideas why and how it can be solved? Thanks People

I would execute SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
If there is no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao.

I have noticed recently that deleted e mail messages do not disappear from the screen. Instead they turn grey until I switch to another mailbox. When I return, they are gone. Any idea why this has started to happen?

I have noticed recently that deleted e mail messages do not disappear from the screen. Instead they turn grey until I switch to another mailbox. When I return, they are gone. Any idea why this has started to happen?

I have noticed recently that deleted e mail messages do not disappear from the screen. Instead they turn grey until I switch to another mailbox. When I return, they are gone. Any idea why this has started to happen?

Any Ideas why my two day old ipad touch screen periodically doesn't respond to touch?

Any Ideas why my two day old ipad touch screen periodically doesn't respond to touch?

See what you missed here:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I purchused a Mac 10.9.4. The screen saver is not functioning, any idea why?

I purchased a Mac 10.9.4. The screen saver is not functioning, any idea why? Thanks.

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Best.

My iMac screen goes bright and dim randomly, any idea why?

my iMac screen goes bright and dim randomly, any idea why?

Sounds like a power issue.
Try Resetting the System Management Controller (SMC)

New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on.

New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on. Sometimes holding the power button for a second is enough for it to come back on.

I took it to the Genius Bar, and they identified it as a hardware issue. Just got it back today. Parts replaced were:
620-5629 Display Module — Symptom: Distored/blurred/focus video issue
605-3284 Top Case with Keyboard — Symptom: specific key(s) do not work
So far so good. I'd suggest taking it in and not trying to work around it — it's a rare hardware issue (given the number of threads about it) and should be replaced.

The screen on my ipod nano is static white any idea how to fix?

the screen on my ipod nano is static white any idea how to fix?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT3275 I've 1.85TB empty space on my time Machine, but it only backs up to the beginning of the previous month. it should have weekly back-ups for every month before that. Any ideas why it deletes stuff older than a month?

I've 1.85TB empty space on my Time Machine, but it only retains back-ups to the beginning of the previous month. I should be able to access weekly back-ups for every month before that until the disk is full. Any ideas why it deletes stuff older than a month?
Thanks, Rigby.

If you are using Ethernet to connect your Mac to the Time Capsule, are you allowing at least 2-3 minutes for Time Machine to fully load when you open the application to see your backups?
If you are using wireless to connect, you may need to allow 8-10 minutes or longer for everything to fully load, depending on the speed of your wireless connection.
If you see only white time "bars" on the timeline at the right of the screen, you are seeing temporary backups. Permanent backups are displayed with purple "bars".

My Mac keeps crashing (whole system) when I'm watching videos with Firefox, any idea why?

Ok so I got a new mac and as usual install firefox which is my favorite browser, suddenly my computer started crashing, not just firefox the whole system froze and I had to reboot to make it work again, I didn't know what was happening until I noticed that said crashes happen when I was watching videos on firefox, I tried to use chrome and the issue was gone. So anyone has any idea why this is happening? I really would love to start using firefox again!

Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.
If this does not fix the issue, you may need to reinstall Adobe Flash Player on your computer.

Swatches saved to library changing when used in another file. Any idea why?

Hello,
I have saved a couple of swatches by applying the colors to squares, then saving them to the library and afterwards loading them in another file. One of the squares changes color when imported onto stage. In the library preview it looks ok.
Any idea why and how to solve this?
Marko

Hi Parth,
I saw the option in the maintenance screen of the datasource "Delivery of Duplicate Data Recs"; it was set to Undefined but following your guide, I changed it to "Allowed" and activated the datasource.
Remember the problem was not with the datasource, I was able to execute the infopackage to get the data in the PSA. It is when I try to take it from the PSA to the DSO with the DTP that is where I get the error.
Does't is mean that everything is ok with the datasource?
Any way, after changing to "Allowed", I deleted the load in the PSA and reloaded.
The data now looks good in PSA as before.
Now, a load to the DSO, by executing the DTP gives same error message.
Any more hints?

Screen is white any idea why

Similar Messages

Maybe you are looking for