Screen Painter Image Button cannot set relative path

Hi,
I am using screen painter to create a UI form and i put image into each button. The form can run properly in my PC due to the image path is under my local path. However, the button is gone when i install the UI form in other PC. When using button object in screen painter and it not allow me to set the relative path. Anyone can help??
Cheers,
Anna

Hi Gianluigi,
Thanks for your reply. However, i did try to rename the .srf file to .xml file and change the path to the following
<b><specific image=".\test3.jpg" /></b>
But the program didn't work. But if i change it to <b><specific image="c:\test3.jpg" /></b>, give it the exact path then the program work again.
Do you have any idea on it?
Anna

Similar Messages

TestStand API: Set relative path

Dear NI community!
Could someone help, please, with the following - is there is some option to set file path to code modules, inside test sequence, to have relative, but not absolute path? I add programmatically code modules to sequence steps, but currently they have absolute path. Is it possible to change it to relative with TestStand API?
Thanks in advance.
Solved!
Go to Solution.

I was wrong. It's possible to manually cut path to file (according to Search Directories of TestStand). Then code modules will be added with relative pathes. But one should be careful - path should be cut correctly.
For example, I have full path
E:\Development\source code\supplementary\TestVIs\Code Modules\Service\Print.vi
My Search Directory is
E:\Development\source code\supplementary\TestVIs\
So, I need to cut like this:
Code Modules\Service\Print.vi
and without slash at the beginning!
Then it will be OK.

Xcelsius Scenario Button cannot set the Default Scenario

Hi,
I am facing a problem with the Scenario Button in Xcelsius the problem is i cannot set the Default Scenario in the Dashboard .
I can save load delete the the scenario but if i have 3 scenario and i want to make one of them as default is does not work.
I think there is some browser setting for this and i have already configured the storage setting for the browser .
Warm Regards,
Mishra Vibhav

Hi Thijs
Thanks for your update, I think this really helps me. And I have one more question.
I have seen a SAP notes regarding the Scenario function, the content is as below.
You use the Local Scenario button to save the final result of a specific simulation (created scenario) and return to it in the future. It only saves the scenario on the local machine where it was created. So you can access the scenario from the same machine, but you cannot transfer scenarios from one computer to another.
As per the note we can't transfer scenarios from one computer to another, my question is: If we publish the dashboard to inforview and save the scenario, the scenario will be saved in the BOE repositary or still on the local PC, and could the scenario be able to share among different users?
Thanks a lot

Image field - cannot set h and w attribute of all node elements

Hi guys,
We currently need to show some photos on our .pdf forms when the form is generated. The number of pictures are unknown at runtime and need to be determined dynamically. This is not the problem - we figgured this out by using base64 encoding for retrieving these picture.
Now, when we try to display all of these picures on the .pds we would like to have control over the width and size of these pictures ( the h and w properties.). The problem is that only the VERY FIRST picture gets applied these properties that we set, and all the following pictures are the size as per design time.
This is obviously do to us not knowing how to "loop through" this node in JavaScript/FormCalc. Please help! Also, which event should we use?
This is the code we are using:
xfa.form.pdfFields.Notification.SubformPhoto.Table9.Row1.ImageField2.h
= "4in";xfa.form.pdfFields.Notification.SubformPhoto.Table9.Row1.ImageField2.w
= "4in";
We thought that the following should work to apply the values for all the elements, but this does not work.
xfa.form.pdfFields.Notification.SubformPhoto.Table9.Row1.ImageField2[*].h = "4in";xfa.form.pdfFields.Notification.SubformPhoto.Table9.Row1.ImageField2[
*].w = "4in";
Thanks!

Hi,
I don't know want you want to do with
Method[] methods = element.getClass().getMethods();
If you just want to set the values in the Context you can just go for using:
wdContext.currentUserElement().setPassword("VALUE");
wdContext.currentUserElement().setName("VALUE");
Or If you have a collection you can create elements in a loop like
you posted in the beginning of this thread:
IPrivateUserView.IUserElement element = wdContext.nodeUser().createUserElement();
wdContext.nodeUser().addElement(element);
element.setUserName("VALUE");
element.setUserPassword("VALUE");
Regards,
Dennis

Is Image File path of Menus element support relative Path?

hi,all
absolute path is OK!
but relative path no support!
how to support it?
thanks
tony

Hi Tony,
The image file does support relative path but it requires a little coding.
Please have a look at this thread:
https://forums.sdn.sap.com/click.jspa?searchID=3854863&messageID=1041573
Kind Regards,
Owen

Screen painter, ChooseFromList and et_EDIT

Hi,
I'm in Screen Painter and I did set a it_EDIT with a ChooseFromList Business Partner.
When I hit PREVIEW, it works fine, the list of Business Partners appear and I choose one but the choosen one do not go in the et_EDIT textbox.
I don't understand the Aliases because the help do not let me understand what it is and there's no way to see by a demo or anything else so I can understand clearly.
First is this all possible just by the Screen Painter or I do need to code something else ? Any video tutorials ? Anything could help understand how to make it work.
I beg anyone to give me a working solution.
Thank you
Edited by: Marc Roussel on Dec 20, 2010 3:16 PM

Just a mall thing. Everything seems to work except that when I did choose the BP, a message pop saying :
"Item - Can't set value on item because the item can't get focus. [66000-153]"
However once I clicked OK of that message, I see my choosen BP in my EditText and everything is fine so I don't understand why I receive this message. Here's the code I use
if (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_ACTIVATE && pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_LOAD)
    if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_CHOOSE_FROM_LIST)
        SAPbouiCOM.IChooseFromListEvent oCFLEvento = null;
        oCFLEvento = ((SAPbouiCOM.IChooseFromListEvent)(pVal));
        string sCFL_ID = null;
        sCFL_ID = oCFLEvento.ChooseFromListUID;
        SAPbouiCOM.Form oForm = null;
        oForm = SBO_Application.Forms.Item(FormUID);
        SAPbouiCOM.ChooseFromList oCFL = null;
        oCFL = oForm.ChooseFromLists.Item(sCFL_ID);
        if (oCFLEvento.BeforeAction == false)
            SAPbouiCOM.DataTable oDataTable = null;
            oDataTable = oCFLEvento.SelectedObjects;
            string val = System.Convert.ToString(oDataTable.GetValue(0, 0));
            if ((pVal.ItemUID == "it_BPCode") && pVal.ActionSuccess)
                ((SAPbouiCOM.EditText)oForm.Items.Item("it_BPCode").Specific).Value = val;

Screen painter button image

Hello
Can anyone tell me if it possible to put an image on a button in the screen painter? I would like buttons like in "Tax Report - Selection Criteria" form (i.e. an up- and a down-button), but I don't succeed in putting such an image on the button.
Thanks in advance
Iris Spenninck

Hello
Now I have found how to put an image on a button, but I have yet another question.
In stead of a normal button with an image, I would like to have an orange triangle like in the reconciliation form (triangle up and triangle down).
Anyone any idea how to accomplish that?
Thanks
Iris

How to set Function Code for Radion Buttons in Screen painter

Hi,
I have faced problem of grouping 3 radio buttons in screen painter (no graphical editor). How to do it?
I have checked similiar threads in SDN, but those are for graphical editor.
Radio Buttons in custom screeen
http://****************/Tutorials/ABAP/Checkbox/page1.htm
http://****************/Tutorials/ABAP/Checkbox/page2.htm
Regards,
Sukhbold

Hi,
U want to create radio button in the selection screen then u can create like this
PARAMETERS : c1 AS CHECKBOX USER-COMMAND cd,
r1 RADIOBUTTON GROUP rad,
r2 RADIOBUTTON GROUP rad.
AT SELECTION-SCREEN OUTPUT.
IF c1 = 'X'.
LOOP AT SCREEN.
IF screen-name = 'R1'.
screen-input = '0'.
screen-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-name = 'R1'.
screen-input = '1'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Thanks,

Relative path for images in RTF templates

Hi everybody!
When I insert an image in a RTF template, I put its path into the web dialog, in order to see correctly the picture when I open the report from the xmlp server, in this way: url:{"http://servername/analytics/res/Images/image.bmp"}
How can I make this path relative, in order to see the images even if the server name changes?
Thanks so!
Francesco

Hi Tim,
I am using BIP 10.1.3.3.2. I am able to access system variable CURRENT_SERVER URL.
Steps:
<?param@begin:CURRENT_SERVER_URL?>
<xsl:value-of select="$ CURRENT_SERVER_URL"/>
CURRENT_SERVER_URL is getting printed in BI Publisher. Value displayed is http://xx4697.xxx.co.in:9704/xmlpserver.
Now we are importing xsl into RTF template. File aaa.xsl is stored at [BIP_Installation_Directory\oc4j_bi\j2ee\home\default-web-app]
We have hardcoded the path for XSL in RTF. The path is <?import: http://xx4697.xxx.co.in:9704/aaa.xsl?>
As we want to set dynamic path we changed hardcoded xsl path to <?import: {$CURRENT_SERVER_URL}/../aaa.xsl?> but it is not working. Sometimes BIP is taking local path of MyDocuments folder and sometimes Desktop path. If I put that XSL file in MyDocuments folder or Desktop, it is working fine. But ideally it should refer [BIP_Installation_Directory\oc4j_bi\j2ee\home\default-web-app] path...
Thanks,
Amit D

Relative paths for images upset by forwarding requests

Hello World.
          I am using a web app deployed in Weblogic 5.1 with service pack 8.
          I have hit a problem which puzzles me. When I forward a request from
          one JSP to another (say from A to B) the web server seems to take the
          URLs of the images on the served file (B) relative to the path on the
          calling file (A). Here's a detailed explanation...
          Suppose I have a the web app structured as follow
          /oddApp/launch/A.jsp
          /oddApp/B.jsp
          /oddApp/images/tick.gif
          Page A simply stores its request URI and forwards its request to page B
          <jsp:forward page="/B.jsp" />
          Page B displays its requestURI, contextPath and servletPath. It also
          attempts
          to show three images
          <img src="images/tick.gif">
          <img src="../images/tick.gif">
          <img src="/images/tick.gif">
          When I invoke page B directly, the first image is shown, the others are not.
          When I invoke page A, it forwards to B and the second image is shown, the
          others are not.
          In each case the URI, contextPath and servletPath are correctly displayed
          with regard to page B.
          URI = [oddApp/B.jsp]
          contextPath = [oddApp]
          servletPath = [B.jsp]
          The URI in A.jsp is also correct (i.e. /oddApp/launch/A.jsp).
          The search for the images seems to be relative to the original URI (i.e. not
          the URI used to forward), which strikes me as daft. It means that page B
          must be aware of where it is being called from. It is perfectly plausible
          that
          relative paths which suit when called from one location are incorrect when
          called from another.
          I had thought that including the leadling slash (as shown as the third
          image)
          would cause the search relative to the document root (/oddApp/), but this
          appears not to be the case. The search is done relative to the root of the
          server not the web app.
          Adding jsp mappings in the deployment descriptor of the web app does not
          help (I had thought it a long shot anyway).
          Does anyone have any thoughts on this?
          PHiL


i face the same problem (WinNT, WLS6.0): my wep app has a contextRoot " root " which makes it react to the URL: http://host:port/root /: it is this folder which will be used as a basis by the Web server But in the jps I use a relative URL for images: / images/toto.gif : it works very well when I deploy my jsp out of a Web-app by setting a document.root to the weblogic web server.On the other hand, once deployed in a Web-app, images are not found because the default path of the browser is http://host:port, without the context root of the Web-app! In other words, my war has images/*.gif in its root but when /images/toto.gif is resolved in a jsp, as the relative URL is not prefixed by my context-root, the image is not search in the war! actually, if I type http://host:port/root/toto.gif, my image appearsany clues? an alias on the web server? a setting in web.xml/application.xml and their weblogic equivalent files?

Relative path to Images ?

I recently migrated from Win XP to a new PC Win 8. Moved all the files & D.W. related apps... all went relatively seamless. But I noticed the Relative path to any Image that created in Photoshop still has the old path
i.e.
Original (old) file:///C|/Documents and Settings/My Documents/PMF Web Design stuff/Menu_Button_Home_2013.psd
New file:///C|/Documents/PMF Web Design stuff/Menu_Button_Home_2013.psd
Is there a file in my D.W. site that has these paths ???If so I could do a global update ... I have dozens of these type entries... would hate to do all 1 by one.
THANKS in advance

Guess I did Not explain my dilemma correctly. My site worked fine after I migrated to the new PC... all the SOURCE Images were in my root folder... What I could not find (up until now) was where the ORIGINAL .PSD files were referenced. D.W. keep sync information with Photoshop, if/when the Original gets updated... D.W. notifys you. Please see scrnshot GREEN arrow below.
After several hours of P.D. I figured it out for future reference.... the ORIGINAL file is referenced in a sub-folder of your Image Folder... called _NOTES each & every image has an associated .JPG.MNO file.
Simple example Home_Button.JPG resides in Image folder... Home_Button.JPG.MNO resides in _notes.
Down near the bottom of Home_Button.JPG.MNO is a record that points to the ORIGINAL Parent file.
Looks something like: <infoitem key="FilePathSrc" value="file:///C|/Users/Documents/PMF_Design_PSD/Home_Button.psd" />
I had hundreds of these that need updating... I used the D.W. Find & Replace feature... took a few tries to get all the options set correctly. But it saved me several hours.
Hope this helps someone in the future migrate to/from PC's,

Problem defining relative path ofr images in struct tiles

hi
I have a jsp pages in which i am setting the layout using tiles . To display an image
i am using < img src= "./../images/abc.gif" />
this doesnt seem to work.
but if i give absolute path like src="C:\myDoc|....\abc.gif" it works.
As i have to deploy it so i cant give absolute path.
One solution i found is to use request.getContextPath()
<img src="<%=request.getContextPath()%>/tutorial/images/abc.gif" works.
is there any way we can give relative path like ?
< img src= "./../images/abc.gif" />

Hi , I have found the solution.
<c:url value='/javascript/menuscript.js'/>"{code} can be used to avoide the absoulte path . The c:url tag takes default value as Webcontent . so you need to give only path after the webContent

When I click the iCloud button I get a browser with check boxes, not slider buttons and it does not have a "backup and storage" button. So I cannot set up backup.

When I open my iCloud browser it looks different than "normal." It shows the list with check boxes, not slider on-off buttons. It dos not show a "storage and backup" button so I cannot set up my backup. What is wrong?

If see something like the image below it's because you are looking at the iCloud settings on your Mac, not on an iOS device (which has sliders). Storage & Backup isn't in the Mac settings because you cannot back up your Mac to iCloud. Only iOS devices can back up to iCloud. On a Mac, you can get information about your iCloud account storage by looking at the green usage bar at the bottom and by clicking the "Manage..." button on the bottom right.

How to give a relative path from a button in the master page header?

so I have this code in the header of my Master page in RoboHelp:
<input type="image" value="View graphics legend"
onclick="window.location.href='Graphics_legend.htm'"
src="Images\graphic legend.png" name="image1"
title="View graphics legend" style="width: 118px; height: 21px;" />
i need to call the 'Graphics_legend.htm' file which is sitting in the root folder. When i try this it works fine for the html file which are in the root folder as well, but anything with is in a sub directory , the button stops working.
It might be just to add a realtive path ,but i am failing to understand how to make a relative path for 'Graphics_legend.htm' ,.. ?

Hi there
Relative paths are relatively simple once you get the hang of them.
For example, if you want to refer to something that is one folder above where you are, you prefix things with ../
The ../ is HTML shorthand meaning one folder level above where I am. If you wish to go two folder levels up, ../../
If you need to drop into a folder that is at the same level as where you are, ../FolderName
From what you have written it would seem that RoboHelp isn't seeing your code and properly calculating the path. That's really not too surprising because you are using the Button element.
If you are using CSS and linking to a style sheet you likely have a simple way to calculate what the relative path should be. Just examine the source code of the topic and note what prefixes the CSS file name. Assuming your CSS is in the project root (and it should be) then you could use the same prefix.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Cannot load XML file in Screen Painter in SAPB1

Hi All,
i am creating an xml file of existing purchase order through the following code
Public Sub getxml(ByVal FormUID As String)
        Dim f As SAPbouiCOM.Form
        f = sbo_application.Forms.Item(FormUID)
        Dim oXmlDoc As Xml.XmlDocument
        Dim sXmlString As String
        oXmlDoc = New Xml.XmlDocument
        '// get the form as an XML string
        sXmlString = f.GetAsXML
        oXmlDoc.LoadXml(sXmlString)
        Dim sPath As String
        sPath = IO.Directory.GetParent(Application.StartupPath).ToString
        oXmlDoc.Save((sPath & "\ChangedXml.xml"))
    End Sub
i am calling this function getxml in pageload of this form as
Private Sub B1_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles sbo_application.ItemEvent
        If pVal.FormType = "142" And pVal.BeforeAction = False Then
            Dim oItem As SAPbouiCOM.Item
            Dim oFolder As SAPbouiCOM.Folder
            Dim oform As SAPbouiCOM.Form
            Dim oStaticText As SAPbouiCOM.Button
            Dim oEditText As SAPbouiCOM.EditText
            Select Case pVal.EventType
                Case SAPbouiCOM.BoEventTypes.et_FORM_LOAD
                    getxml(FormUID)
            End Select
        End If
End Sub
it will create the xml file ChangedXml.xml in the destination folder, then i will copy that one and paste it and change the extension to .srf.
then i will open screen painter and try to acceess this one it will open the form but it will give an error as Error: Menu - Image Type Not Supported
it will open the screen but it won't open the matrix, the space which consists of matrix in the original form will come as blank.
Please any one help me, it's urjent.
Thanks,
Vaithy
09886807576

Hi Vaithy,
Not all the items you have in B1 forms are supported by the UI API and/or the ScreenPainter.
If you need to reproduce a B1 system form you will have to remove all items giving you an error in the ScreenPainter and then have a reduced form.
Why do you need the xml of the Purchase Order form? Please take care if you are trying to reproduce the behavior of the Purchase Order form, there can be some Formatted Searches or other customizations in the B1 form if you are using other addons.
Hope it helps
Trinidad.

Screen Painter Image Button cannot set relative path

Similar Messages

Maybe you are looking for