Script for Director in Authorware
Hello,
I am new here and I hope that someone could help me.
I have a Director movie and I want to play this in Authorware
with the ActiveXcontrol. I see the movie playing but Authorware
goes on running the complete flowline in the back while the
Director movie is playing in front of it.
I am not good in scripting in Authorware but I need a script
that tells Authorware to play the Director movie, (and stay at that
point of the flowline) and continue the flowline after the Director
movie Quits. (The Lingo command Quit in the Director movie)
Is there someone to help me?
O.... something else, the stage of the Director File is the
same size as the Authorware stage
Thanks
Marius
To elaborate on what Erik has said, you'll need an
interaction with an event
response set up that will catch some sort of event set up
with Director. I
don't think anyone on here uses Director on here much, so
they'd have to
experiment with the files as much as you would. You may find
that looking
at the Flash ActiveX ShowMe gives you some ideas of things to
look at while
you're experimenting.
HTH;
Amy
"Erik **AdobeCommunityExpert**"
<[email protected]> wrote in
message news:[email protected]...
> I've not worked with Director in Authorware in a real
long time.
> If the Authorware presentation is continuing, then it
needs to stop until
> the Director movie says it's ok to move on.
> In Flash, you could do this with a fsCommand or getURL
function. Flash
> would execute that function when done and you would
setup an 'Event
> Response' interaction in Authorware to wait for it.
> Can Director send such an event?
> Erik
>
> marius siroen wrote:
>> Hello,
>>
>> I am new here and I hope that someone could help me.
>>
>> I have a Director movie and I want to play this in
Authorware with the
>> ActiveXcontrol. I see the movie playing but
Authorware goes on running
>> the complete flowline in the back while the Director
movie is playing in
>> front of it.
>>
>> I am not good in scripting in Authorware but I need
a script that tells
>> Authorware to play the Director movie, (and stay at
that point of the
>> flowline) and continue the flowline after the
Director movie Quits. (The
>> Lingo command Quit in the Director movie)
>>
>> Is there someone to help me? O.... something else,
the stage of the
>> Director File is the same size as the Authorware
stage
>>
>> Thanks
>> Marius
>>
>
> --
> Erik Lord
>
http://www.capemedia.net
> Adobe Community Expert - Authorware
>
http://www.adobe.com/communities/experts/
>
>
http://www.awaretips.net -
samples, tips, products, faqs, and links!
> *Search the A'ware newsgroup archives*
>
http://groups.google.com/groups?q=macromedia.authorware
> *The Blankenship Caveat: Note that direct linking to
http content
> through any Authorware icon will likely fail if a proxy
server is
> present!*
Similar Messages
-
Need script for moving files to specific directories base on csv
Hi,
I have a question. I have about 2000 files (pdf), which I need move to specific directories and subdirectories, which are based on csv file.
Csv is looking like this:
filename;directoryname;subdirectoryname;subdirectoryname;.......etc.
I have a script for creating directories with subdirectories from csv file, but I need this script for moving files to this directories.....
Thanks a lot for every help.
Best Regards
Petr, OS X Mavericksprivate function snapshotLastFrame():void
gotoAndStop( this.totalFrames );
_bitmapData = new BitmapData( stage.stageWidth, stage.stageHeight );
_bitmap = new Bitmap( _bitmapData );
_bitmapData.draw ( stage );
saveImageJPG( _bitmapData, "test.jpg", 96 );
public function saveImageJPG( bitmapData:BitmapData, fileName:String, quality:int ):void {
this.jpgEncoder = new JPGEncoder( quality );
this.fileReference = new FileReference();
this.fileReference.save( this.jpgEncoder.encode( bitmapData ), fileName + ".jpg" );
Keep in mind that you need a few extra libraries to be able to create a jpeg.. (AS3CoreLib) can be found at googleCode. -
Overhauling the Documentation for Director
Hi Everyone,
Please excuse this cross-post. You can also find it on the Direct-L mailing list and on the Director Online Forum. I will post a summary of answers to each of these places.
Rajnish Bharti, Product Manager for Director and Shockwave, asked me last week for my input on how best to overhaul the documentation for Director. In particular, he asked me to give him an idea of what the Table of Contents should look like.
You can find my first draft of the Table of Contents here:
http://www.openspark.com/adobe/Director_Documentation_01.zip
While preparing this, I contacted a number of Director teachers and trainers, talked to some newcomers to Director, consulted dozens of Director books (mostly from the Macromedia days) and pored over the various reincarnations of Director's own help.
Examples
Lots of real-life examples that you can copy and paste and
know that they will work
Images
Clear and concise screen shots that capture the essence of
a concept at a glance
Fast and Powerful Searching
Beginners don't know which menu item or scripting term they
are looking for. The search engine should help users to home
in from a layman's expression to the appropriate documentation
article. Articles should be intelligently cross-referenced.
I have suggested dividing the documentation into three sections:
1. Director Step by Step
A series of short hands-on tutorials which introduce all the
commonly-used features of Director in the context of simple
movies. Beginners can start here.
This section imagines that you have never used Director or
studied its documentation before. You select a project that
is similar to the one you are planning, and the documentation
shows you how to achieve your goal using Director.
Hyperlinks lead you to more in-depth entries in the Feature
Guide on how a feature works, or to the appropriate entry in
the Scripting Dictionary.
2. Feature Guide
This section will give detailed explanations of each feature,
category by category. It will be divided into three main
chapters:
The Workspace
Working with the various windows and menus
The Raw Materials
Understanding sprites, members, the various media types
and data types
The Process
Designing your project, animating sprites, using scripts
and publishing your work.
This section will give you a categorized view of what Director
does. It imagines that you start with a "How do I..." type of
question, and guides you to the appropriate part of the
User Interface or the correct scripting terms to use.
It will contain links both to the Step by Step tutorials and
to the entries in the Lingo Dictionary.
3. Alphabetical Scripting Dictionary
I have abandoned the idea of having the Dictionary divided
into categories. I believe it is much easier to find an
entry without having to wonder whether it is a keyword, a
method or an operator. If you don't know what entry you
should be looking for, the Feature Guide will help you. If
you do know the word you are looking for, then you only
need to know the alphabet.
Each entry in the Scripting Dictionary should link back to
the articles in the Feature Guide which refer to it, and to
each of the tutorials in the Step by Step section which use
the term.
I also suggest (Section 4) implementing a much more powerful Search engine than the D11.5 browser-based help currently features, but that is not really a part of the Table of Contents.
The document that I have posted at...
http://www.openspark.com/adobe/Director_Documentation_01.zip
... is by no means definitive, but it is at a point where I am ready to share it, to check if my general approach is acceptable.
I have not gone into much greater detail in some areas than in others, so past the 4th level, you may find certain areas are still vague. You may have better ideas for the Step by Step tutorial movies than the ones I have included.
Red text indicates new content.
I welcome feedback from all members on the community, both in terms of the content and the structure.
Once we have a comprehensive list of all the topics to cover and a consensus on the structure, then we will have to work out the most cost-effective way of generating the actual content.
Let me know what you think,
JamesJames, this looks outstanding!
I'm too far behind in versions to offer much here, but one thing I noticed that, I think is an oops:
3.4. Java Dictionary
should be:
3.4. JavaScript Dictionary
Unless they brought back the Java beast, that is.
Mark A. Boyd
Keep-On-Learnin' :-) -
Disaster Recovery Scripts for Managed Server MSI Startup
I am trying to get some custom start scripts created for each of my managed servers in the event the admin console is down or server gets hosed. We use nodemanager to start the managed servers in a Windows environment. I have about 8 managed servers and they all use the same nodemanager classpath but all have different server start arguments (different memory settings, etc....) so I need to make different custom scripts for each.
Verbose Garbage Collection to Determine Heap Size .....this thread by Jay has been very helpful but so far I am just getting kicked back to the syntax screen like something is wrong in my script. Attached is the script and the output when I run it. Any help would be appreciated...thanks.
startManagedFPCE1.cmd contents
java.exe -Xms400m -Xmx400m -classpath $CLASSPATH -Dweblogic.Name=FPCE1 -Dbea.home="C:\Oracle\Middleware" -Dweblogic.management.username=beaadmin -Dweblogic.management.password=beaadminxxx -Dweblogic.management.server=http://sitportal1:8098 -Djava.library.path=c:\Oracle\Middleware\wlserver_10.3\server\bin -Dweblogic.ext.dirs=C:\Oracle\Middleware\patch_wls1032\profiles\default\sysext_manifest_classpath;C:\Oracle\Middleware\patch_wlp1032\profiles\default\sysext_manifest_classpath;C:\Oracle\Middleware\patch_oepe1111\profiles\default\sysext_manifest_classpath;C:\Oracle\Middleware\wlportal_10.3\p13n\lib\system;C:\Oracle\Middleware\wlportal_10.3\light-portal\lib\system;C:\Oracle\Middleware\wlportal_10.3\portal\lib\system;C:\Oracle\Middleware\wlportal_10.3\info-mgmt\lib\system;C:\Oracle\Middleware\wlportal_10.3\analytics\lib\system;C:\Oracle\Middleware\wlportal_10.3\apps\lib\system;C:\Oracle\Middleware\wlportal_10.3\info-mgmt\deprecated\lib\system;C:\Oracle\Middleware\wlportal_10.3\content-mgmt\lib\system -Dweblogic.alternateTypesDirectory=C:\Oracle\Middleware\wlportal_10.3\portal\lib\security
Results of running above script:
C:\Oracle\Middleware\user_projects\domains\SIT11\servers\FPCE1>java.exe -Xms400m -Xmx400m -classpath $CLASSPATH -Dweblogic.Name=FPCE1 -Dbea.home="C:\Oracle\Middleware" -Dweblogic.management.username=b
eaadmin -Dweblogic.management.password=beaadminsit11 -Dweblogic.management.server=http://sitportal1:8098 -Djava.library.path=c:\Oracle\Middleware\wlserver_10.3\server\bin -Dweblogic.ext.dirs=C:\Oracle
\Middleware\patch_wls1032\profiles\default\sysext_manifest_classpath;C:\Oracle\Middleware\patch_wlp1032\profiles\default\sysext_manifest_classpath;C:\Oracle\Middleware\patch_oepe1111\profiles\default\
sysext_manifest_classpath;C:\Oracle\Middleware\wlportal_10.3\p13n\lib\system;C:\Oracle\Middleware\wlportal_10.3\light-portal\lib\system;C:\Oracle\Middleware\wlportal_10.3\portal\lib\system;C:\Oracle\M
iddleware\wlportal_10.3\info-mgmt\lib\system;C:\Oracle\Middleware\wlportal_10.3\analytics\lib\system;C:\Oracle\Middleware\wlportal_10.3\apps\lib\system;C:\Oracle\Middleware\wlportal_10.3\info-mgmt\dep
recated\lib\system;C:\Oracle\Middleware\wlportal_10.3\content-mgmt\lib\system -Dweblogic.alternateTypesDirectory=C:\Oracle\Middleware\wlportal_10.3\portal\lib\security
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-server to select the "server" VM
-hotspot is a synonym for the "server" VM [deprecated]
The default VM is server.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-version:<value>
require the specified version to run
-showversion print product version and continue
-jre-restrict-search | -jre-no-restrict-search
include/exclude user private JREs in the version search
-? -help print this help message
-X print help on non-standard options"bharat nagwani" <[email protected]> wrote:
>
Hi,
Configuration: Weblogic 8.1SP2 on Windows 2000, 1 admin server and 14
managed
servers
whats the right way from these 2 scenarious to create a domain on managed
server
1. create domain on managed server using configuration wizard. Then point
to this
domain from administration server remote start tab(root directory). This
is what
we do so far.This is the best way to create managed servers for your domain.
>
2. Just enter user_projects/domains folder/$domain name$ in remote start
tab(root
directory)
on admin server console and when you start the managed server from
admin console
the domain folder and files will be created.
Yes, the managed server is started in this case at the root directory you specified.
The difference is in the
1. first case we see all scripts like startManagedWeblogic, setenv, boot.properties
etc
this may help(we still dont know) if one wants to bring up managed
server
manually using
startManagedServer.bat without using node manager.Yes, that is correct. You will need to edit the startManagedServer.bat to include
the admin server URL, username and paswword..
>
2. second case only 2-3 files get created like msi-config.xml and SerializedSystemIni.dat
Basically first case is superset of second case.
What is the experience of people in this regard?
thanks much
bharat -
"samba-discovery". An automounter script for windows shares
Hi.
At the last lan party I found it quite annoying to mount samba shares by hand all the time (as I don't use a smb capable browser with fuse like dolphin or the like). So here's what I've come up with. Explenations on how it works are at the start of the script. You can also download it directly from here. Basically you run it and anything available on the lan will be tidily mounted to /mnt/samba-discovery/*.
#!/bin/bash
# Hi and welcome to this samba/windows share automounting script.
# It will:
# - Scan the network for windows/samba hosts.
# - Mount all their available guest shares
# - If rerun it will check if all shares are still accesible
# - Unmount everything if you use the -u option
# It will not:
# - Work on password protected shares. No idea what will happen,
# I guess mount.cifs will spit an error but the script will continue
# Run it without options to mount/rescan, use -u to unmount everything.
# Before running it please specify the options below.
# Post questions on the Archlinux forum: http://bbs.archlinux.org/viewtopic.php?pid=596979#p596979
# MOST IMPORTANTLY: If it eats all your files for breakfast, it's none
# of my responsibility! It should be quite safe though because it's
# always checking if a dir is empty before deleting it.
### Options
# Specify the name of your network adapter (e.g. eth0):
netiface='eth0'
# Specify which range of IPs you're interested in (less is faster)
lowend=1
highend=20
### Code
# Prepare samba-discovery folder
if [[ ! -d /mnt/samba-discovery/ ]]; then
mkdir /mnt/samba-discovery
fi
# Unmount all shares and clean up directories using -u
umountcount=0
uhostcount=0
if [[ $1 == "-u" ]]; then
shopt -s nullglob dotglob
dirs=(/mnt/samba-discovery/*)
(( ${#dirs[@]} )) || sharefolders=1
shopt -u nullglob dotglob
if [[ ! $sharefolders == 1 ]]; then
for i in /mnt/samba-discovery/*/*; do
umount "$i" 2>/dev/null
cd "$i" 2>/dev/null
shopt -s nullglob dotglob
files=(*)
(( ${#files[*]} )) || dirempty=1
shopt -u nullglob dotglob
if [[ ! $dirempty == 1 ]]; then
echo ">>> warning: target directory not empty although share unmounted"
echo ">>> aborting. please investigate directory:"
echo " $i"
exit 1
else
dirempty=0
rm -R "$i"
echo " share on $i unmounted, folder removed."
((umountcount++))
fi
done
for i in /mnt/samba-discovery/*; do
umount "$i" 2>/dev/null
cd "$i" 2>/dev/null
shopt -s nullglob dotglob
files=(*)
(( ${#files[*]} )) || dirempty=1
shopt -u nullglob dotglob
if [[ ! $dirempty == 1 ]]; then
echo ">>> warning: target directory not empty although all shares unmounted"
echo ">>> aborting. please investigate directory:"
echo " $i"
exit 1
else
dirempty=0
rm -R "$i"
echo " parent folder $i removed."
((uhostcount++))
fi
done
echo "-> Removed $umountcount shares and $uhostcount parent folders"
exit 0
else
echo "no parent folder found, nothing to unmount"
exit 0
fi
fi
# Normal run. Scan for shares which are no longer on the network...
if [[ ! $1 == "" ]]; then
echo "Invalid option. Aborted"
exit 1
fi
shopt -s nullglob dotglob
dirs=(/mnt/samba-discovery/*)
(( ${#dirs[@]} )) || sharefolders=1
shopt -u nullglob dotglob
if [[ ! $sharefolders == 1 ]]; then
echo ':: Cleaning up orphaned shares...'
cleancount=0
for i in /mnt/samba-discovery/*/*; do
if [[ ! $(ls $i 2>/dev/null) ]]; then
umount "$i" 2>/dev/null
cd "$i" 2>/dev/null
shopt -s nullglob dotglob
files=(*)
(( ${#files[*]} )) || dirempty=1
shopt -u nullglob dotglob
if [[ ! $dirempty == 1 ]]; then
echo ">>> warning: target directory not empty although share unmounted"
echo ">>> aborting. please investigate directory:"
echo " $i"
exit 1
else
dirempty=0
rm -R "$i"
echo " share on $i no longer accesible, removed."
((cleancount++))
fi
else
if [[ ! $(cat /proc/mounts | grep "cifs" | awk '{print $2}' | grep $i) ]]; then
cd "$i" 2>/dev/null
shopt -s nullglob dotglob
files=(*)
(( ${#files[*]} )) || dirempty=1
shopt -u nullglob dotglob
if [[ ! $dirempty == 1 ]]; then
echo ">>> warning: target directory not empty although nothing mounted there"
echo ">>> aborting. please investigate directory:"
echo " $i"
exit 1
else
dirempty=0
rm -R "$i"
echo " nothing mounted on $i, removed."
((cleancount++))
fi
fi
fi
done
echo "-> Cleaned out $cleancount shares"
fi
# ... and then scan for new hosts and mount shares
echo ':: Scanning for new hosts and shares...'
netaddr=$(ifconfig eth0 | grep "inet addr" | awk '{print $2}' | awk -F ":" '{print $2}' | awk -F "." '{print $1"."$2"."$3}')
hostcount=0
sharecount=0
for ((ip=$lowend; ip<=$highend; ip++)); do
printf " scanning $netaddr.$ip...\r"
if (( $(nmap -PN -p139,445 "$netaddr.$ip" | grep -e "139/tcp open" -e "445/tcp open" | wc -l) == 2 )); then
hostwinname="$( nmblookup -A $netaddr.$ip | grep "<00>" | grep -v "<GROUP>" | awk '{print $1}')"
hostdirname="$(echo $hostwinname | tr [:upper:] [:lower:])"
echo " found $hostwinname on $netaddr.$ip"
IFS=$'\n' shares=($(smbclient -N -gL \\\\$netaddr.$ip\\ 2>&1 | grep -e "Disk|" | grep -v '\$' | awk -F "|" '{print $2}'))
for share in ${shares[*]}; do
sharedir="$(echo $share | sed s/\ /_/g | tr [:upper:] [:lower:])"
if [[ "$(cat /proc/mounts | grep ",unc=\\\\\\\\$netaddr.$ip\\\\$share,")" ]]; then
echo " share "$share" already mounted in /mnt/samba-discovery/$hostdirname/$sharedir"
else
if [[ ! -d "/mnt/samba-discovery/$hostdirname" ]]; then
mkdir "/mnt/samba-discovery/$hostdirname"
#echo "$hostwinname:$hostdirname:$netaddr.$ip" >> /mnt/samba-discovery/$hostdirname/ip.txt
fi
if [[ ! -d "/mnt/samba-discovery/$hostdirname/$sharedir" ]]; then
mkdir "/mnt/samba-discovery/$hostdirname/$sharedir"
else
cd "/mnt/samba-discovery/$hostdirname/$sharedir"
shopt -s nullglob dotglob
files=(*)
(( ${#files[*]} )) || dirempty=1
shopt -u nullglob dotglob
if [[ ! $dirempty == 1 ]]; then
echo ">>> warning: mounting directory not empty although share not mounted!"
echo ">>> aborting. please investigate directory:"
echo " /mnt/samba-discovery/$hostdirname/$sharedir"
exit 1
fi
dirempty=0
fi
mount "//192.168.1.$ip/$share" "/mnt/samba-discovery/$hostdirname/$sharedir" -o guest 2>/dev/null
echo " mounted "$share" in /mnt/samba-discovery/$hostdirname/$sharedir"
((sharecount++))
fi
done
((hostcount++))
fi
done
echo "-> Mounted $sharecount shares from $hostcount hosts."
# Remove samba-discovery folder if it is empty
if [[ -d /mnt/samba-discovery/ ]]; then
cd "/mnt/samba-discovery/"
shopt -s nullglob dotglob
files=(*)
(( ${#files[*]} )) || sambadirempty=1
shopt -u nullglob dotglob
if [[ sambadirempty == 1 ]]; then
rm -R /mnt/samba-discovery/
fi
fi
Here's some sample output of how it will look, including one orphaned share and a new one on a rerun of the script:
[root@Mothership samba-discovery]# /home/medja/scripts/samba-discovery
:: Cleaning up orphaned shares...
share on /mnt/samba-discovery/blackrabbit/conflict_denied_ops no longer accesible, removed.
-> Cleaned out 1 shares
:: Scanning for new hosts and shares...
found BLACKRABBIT on 192.168.1.2
share CD-Images already mounted in /mnt/samba-discovery/blackrabbit/cd-images
share CD-Images2 already mounted in /mnt/samba-discovery/blackrabbit/cd-images2
share Filme already mounted in /mnt/samba-discovery/blackrabbit/filme
share Filme2 already mounted in /mnt/samba-discovery/blackrabbit/filme2
mounted Music Library in /mnt/samba-discovery/blackrabbit/music_library
found MOTHERSHIP on 192.168.1.4
share space already mounted in /mnt/samba-discovery/mothership/space
found EEE on 192.168.1.5
share SharedDocs already mounted in /mnt/samba-discovery/eee/shareddocs
-> Mounted 1 shares from 3 hosts.
Last edited by Shapeshifter (2009-08-07 18:51:05)thanks a lot, i wanted to write that script for a long time, but never got around. one thing though, you shouldn't mount stuff in a subfolder of /mnt because /mnt itself should be kept for such purposes (unix file hierarchy standards, afaik)
but that should be easily fixed by myself
cheers
Phil
Last edited by Heller_Barde (2009-08-07 21:42:46) -
Revision: 2877
Author: [email protected]
Date: 2008-08-18 18:15:18 -0700 (Mon, 18 Aug 2008)
Log Message:
Added a "flex4-compile" target in the top-level Ants script for easily recompiling flex4.swc. It is similar to "framework-compile" and "airframework-compile".
Reviewer: N/A
Bugs: -
QA: No
Doc: No
Modified Paths:
flex/sdk/trunk/build.xmlIn the default php.ini is set open_basedir which limits work with php only to few directories (and directories bellow them). There is set /srv/http, /home,/tmp and /usr/share/pear by default.
To allow your vhost you should add /data/www or set empty value. -
Shell Scripts for Directory Creation !
Hi All
Where can we find the Shell scripts for creating Directories before installing SAP SM 7.0 on RHEL 5.2 ?
Please let me know.
Thanks
SrikarYes - it may be necessary if that is a completely new machine.
But it's not that much work for that you would need a script, you can create multiple at once using
mkdir -p /oracle/<SID>/102_64
mkdir -p /oracle/<SID>/sapbackup
etc.
If you don't create them now, sapinst will tell you to create them, it won't stop with an error.
Markus -
Creating SQL-Loader script for more than one table at a time
Hi,
I am using OMWB 2.0.2.0.0 with Oracle 8.1.7 and Sybase 11.9.
It looks like I can create SQL-Loader scripts for all the tables
or for one table at a time. If I want to create SQL-Loader
scripts for 5-6 tables, I have to either create script for all
the tables and then delete the unwanted tables or create the
scripts for one table at a time and then merge them.
Is there a simple way to create migration scripts for more than
one but not all tables at a time?
Thanks,
Prashant RaneNo there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need. -
error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
successHi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support -
Custom calculation script for checkboxs
Hello,
Can anyone help me out with custom calculation script for this? I have two mutually exclusive checkboxes that, when checked, I want to populate data into other text fields.
If Checkbox1 is checked:
Company1=Warehouse Alpha
Address1=1234 Any Street
City/State/Zip1= Los Angeles, CA 90020
Contact Name1= Mr. Nice Guy
Phone Number1= 213-854-8565
Email1=[email protected]
If Checkbox2 is checked:
Company2=Warehouse Beta
Address2= 5678 Awesome Blvd.
City/State/Zip2= San Bernardino, CA 96545
Contact Name2= Mr. Handsome
Phone Number2= 909-824-8265
Email2=[email protected]
Thanks,
BryanSo one has two check boxes and one wants them to be mutually exclusive. Name them the same and change the export value of the field. Try it and observe what happens as you check the different check boxes.
You have described what happens if either box is checked but what happens when a checked box Is unckecked?
One can place scripts in many locations. I would use a mouse up action for both the check boxes, use the same script for both check boxes.
I would assume you are using the following names for the fields to populate:
Company
Address
CityStateZip
ContactName
PhoneNumber
Email
// Mouse up action for both check boxes;
// initial value for the fields:
this.getField("Company"),value = "";
this.getField("CityStateZip"),value = "";
this.getField("ContactName"),value = "";
this.getField("PhoneNumber"),value = "";
this.getField("Email"),value = "";
// test for check box value for selected box;
if(event.value == 1) {
this.getField("Company"),value = "Warehouse Alpha";
this.getField("CityStateZip"),value = "1234 Any Street";
this.getField("ContactName"),value = "Los Angeles, CA 90020";
this.getField("PhoneNumber"),value = "213-854-8565";
this.getField("Email"),value = "[email protected]";
if(event.value == 2) {
this.getField("Company"),value = "Warehouse Beta";
this.getField("CityStateZip"),value = "5678 Awesome Blvd.";
this.getField("ContactName"),value = "San Bernardino, CA 96545";
this.getField("PhoneNumber"),value = "Mr. Handsome";
this.getField("Email"),value = "[email protected]";
// end Mouse up action for both check boxes; -
Sharepoint warmup script for https sites
we want to warm up https site which is based on sharepoint 2010.
When we run some sample powershells it shows access forbidden error so we are not able to warm up https site.
Its slow on first load so need some warmup script for https sites.
sharepointerJust ensure that the service account that you use to trigger the Powershell scripts has access to IIS and SharePoint. Most often, the SharePoint Farm account would be used for scheduling the warm up scripts on the WFE server.
I trust that answers your question...
Thanks
C
http://www.cjvandyk.com/blog -
WSUS script for pending reboot possible addition - How
Hi, I am found script for pending reboot and script work perfectly. My problem is that script generate only pending computers reboot for master wsus server not for replica servers. Can I modify this script to generate pending reboot for all replica servers on
one place(wsus master server) or I must run this script on every replica server. This is script:
[reflection.assembly]::LoadWithPartialName("Microsoft.UpdateServices.Administration") | out-null
if (!$wsus) {
$wsus = [Microsoft.UpdateServices.Administration.AdminProxy]::GetUpdateServer();
$computerScope = new-object Microsoft.UpdateServices.Administration.ComputerTargetScope;
$computerScope.IncludedInstallationStates = [Microsoft.UpdateServices.Administration.UpdateInstallationStates]::InstalledPendingReboot;
$updateScope = new-object Microsoft.UpdateServices.Administration.UpdateScope;
$updateScope.IncludedInstallationStates = [Microsoft.UpdateServices.Administration.UpdateInstallationStates]::InstalledPendingReboot;
$computers = $wsus.GetComputerTargets($computerScope);
$report = @()
$computers | foreach-object {
$computer = $_.FullDomainName
$updatesForReboot = $_.GetUpdateInstallationInfoPerUpdate($updateScope)
$updatesForReboot | foreach-object {
$temp = "" | Select Computer,Update
$temp.Computer = $computer
$temp.Update = ($wsus.GetUpdate($_.UpdateId)).Title
$report += $temp
$report | Select "Computer","Update" | Export-Csv -Path c:\..PendingReboot.csv -Delimiter 1 -NoTypeInformationModified script
work great. I have report from all replica server and master server after new updates
from today. I am add mail option and finaly this is what I am modify:
[reflection.assembly]::LoadWithPartialName("Microsoft.UpdateServices.Administration") | out-null
if (!$wsus) {
$wsus = [Microsoft.UpdateServices.Administration.AdminProxy]::GetUpdateServer();
$computerScope = new-object Microsoft.UpdateServices.Administration.computerTargetScope;
$computerScope.IncludeDownstreamComputerTargets = $true
$computerScope.IncludedInstallationStates = [Microsoft.UpdateServices.Administration.UpdateInstallationStates]::InstalledPendingReboot;
$updateScope = new-object Microsoft.UpdateServices.Administration.UpdateScope;
$updateScope.IncludedInstallationStates = [Microsoft.UpdateServices.Administration.UpdateInstallationStates]::InstalledPendingReboot;
$computers = $wsus.GetComputerTargets($computerScope);
$report = @()
$computers | foreach-object {
$computer = $_.FullDomainName
$updatesForReboot = $_.GetUpdateInstallationInfoPerUpdate($updateScope)
$updatesForReboot | foreach-object {
$temp = "" | Select Computer,Update
$temp.Computer = $computer
$temp.Update = ($wsus.GetUpdate($_.UpdateId)).Title
$report += $temp
$report | Select "Computer","Update" | Export-Csv -Path c:\yourpath...PendingReboot.csv -Delimiter 1 -NoTypeInformation
$smtpServer = "your mail server"
$att = "c:\yourpath...PendingReboot.csv"
$msg = new-object Net.Mail.MailMessage
$smtp = new-object Net.Mail.SmtpClient($smtpServer)
$msg.From = "[email protected]"
$msg.To.Add("[email protected]")
$msg.Subject = "Pending Reboot"
$msg.Body = "Your msg"
$msg.Attachments.Add($att)
$smtp.Send($msg) -
Running Permission Scripts for App-V packages in VDI environment
Hi
We use App-V 5.0 SP1 in VDI environment.
We have a major problem with packages' permissions
Our users don't have administrative privileges on their machines.
As the option for "Security Descriptors" is discontinued, the only way to give permissions to a folder in a package is to use the VFSCACLS.vbs as a startup script of a package.
This way the first time users launch an application they're prompt to reopen it, and the second time they can use the application with the needed permissions.
The problem:
The script saves those permission changes under LOCALAPPDATA\AppV...
Therefore, everytime the users logoff the folder is deleted (VDI...) and again, they must run the script for the first again to get the permissions back after logon!
We cannot roam the LOCALAPPDATA\AppV folder as its size can be dozens of GBs...
Folder permissions with group policy is also not a solution, as the folder name changes everytime we upgrade a package and it's impossible to follow with hundreds of packages.
So it's either we're missing something critical in the architecture with VDI environment or there's a normal solution for these situations.
Would love to get some help
Thanks
Tamir LevyHi Nicke
that's what I did! the problem is that I find my self over and over again want to sequence packages in App-V 5.0 and forced to sequence it in App-V 4.6.
I really hope that it wasn't App-V team's goal. announcing App-V 5.0 and tell us it doesn't support many things so we will still need App-V 4.6 forever.
I have to maintain 2 different App-V environments with 4 different servers , 4 different sequencers and 2 clients on each computer. it doesn't make any sense for me to forced to stay with both of the versions forever.
correct me if I'm wrong but App-V 4.6 is a legacy application. the new versions cover only support on newer operating systems and nothing more. I won't be surprised if in the next version of MDOP won't come with App-V 4.6 anymore and Microsoft will announced
it's unsupported very soon.
Every time I open a ticket with MS Support the best thing I get is "It's a known issue, we can't tell when it will be fixed"
can you help me more ? move it forward to other people from the inside? at least agree with me that something is not as expected in App-V 5.0... :(
I love the technology, I believe in it, I'm kinda depend on it and I only want it to be better
Tamir Levy -
One script for multiple loaded movie clips
Hello,
I am sure that this has been asked or answered before, but
could not locate the correct response.
Problem:
There are 20 movie clips loaded onto the stage through
actionscript. I have 20 different onPress scripts to start the drag
for each (which also contain custom variable).
Problem, I have one single onRelease script which is to be
used for each, but do now wish to give 20 custom handled scripts.
Can I somehow use certain scripting for using one single
generic script for the onRelease? So no matter what was released it
will go through this one script.
Thanks
Dlike this...
activate
set the_folder to choose folder with prompt "Select the folder you want to add folders to..."
tell application "Finder"
set the_name to "Name"
set the_count to 3
repeat with this_num from 1 to the_count
set new_num to this_num as string
if (count new_num) is 1 then set new_num to "0" & new_num
make new folder at the_folder with properties {name:the_name & " " & new_num}
end repeat
end tell -
Getting error while running script for online backup
Hi,
I am running a script for online backup but ended up with an the below error.
*ERROR* [Backup Worker Thread] com.day.crx.core.backup.Backup Failed to create temporary directory
Please help out in resolving this.
Thanks in Advnace.
MaheswarHi mahesh,
If you are using backup feature from crx console, I mean http://localhost:4502/crx/config/backup.jsp I can say that we had also some problems with this functionalities.
First off all what you need to check are the permissions, because when you check a source code there is line which creates a File object using a path specified by you to make a backup of repository.
File targetDir = new File(req.getParameter("targetDir", listDir.getParentFile().getAbsolutePath()));
You need to have sure that the proper read write access has been granted for this path.
Another issue is that maybe there was already prepared some hotfix if you are using CQ5.4. Please refer to the following link:
http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/CRXOnlineBackup.html
and also to this one:
http://dev.day.com/content/docs/en/crx/current/release_notes/overview.html which contains a hotfix number #34797 which was applied to backup.jsp file.
Regards,
kasq
Maybe you are looking for
-
Photoshop CS6 bug report - creating halftone
Error occurred when creating a 4 color half tone separation. I opened a PDF image file 300dpi CMYK and in the channels palet > Split Channels I then chose the first channel (Magenta) and did the following... Image > Mode > Bitmap with the settings In
-
see previous ??, somehow moved files for iphoto and it now appears empty. hoping to recover, have not backup in awhile... is there not a way to restore computer to past date, say last week?
-
"R" or "J" in lower left of photo
In many of my photos imported from Aperture to Photos there is an "R" in the lower left, on occasion a "J" and often nothing. I assume it indicates Raw or Jpeg but if that is the case why is it sometimes blank as all my photos are one or the other.
-
MPG movies, can they play on an iPhone???
I have several movies that are in MPG format. I cannot load these onto my iPhone. Do they have to be in a different format? What formats actually will play on the iPhone. Is there a way to convert mpg files to a compatible format?
-
Sun IDM Installation Automation
Hello-- We are attempting to automate the installation of the SUN Identity manager running on Windows 2003 , using SQL server 2000 & WebSphere. .We are basically Websphere Admins and no IDM gurus hence seek some help from you. The instructions we hav