Script Page Display Problem

Hi,
I have developed Sap Script. And i have declared only one page in Sap Script. And in this page it contains 6 windows. In Each window i have written like this
Example:
If &Nextpage& = 0.
Written Some thing.
Endif.
But the output is coming in 4 pages. the exact one is in 3rd page. how can i avoid 1st,2nd and 4th pages. Could you please help me in this regard?.
Thanks in Advance.
Sai

if you use nextpage = 0..........
it will pring in the last page.
so do one thing take the system variable &sapscrit-formpages& into one vriable. do -1 from that..
now put a condition like &page& = &sapscrit-formpages& - 1.

Similar Messages

IPhone - PDF Page Display Problem

I am trying to display pages from a PDF included in my application to a Quartz context. I can get the first page to display correctly, but am having trouble displaying subsequent pages. In essence I am using the example shown in the Quartz 2D programming Guide (13-1 and 13-2 code examples).
When the view is first loaded, I display the first page, and do something like the following:
CGPDFDocumentRef document;
CGPDFPageRef page;
document = MyGetPDFDocumentRef (filename);
page = CGPDFDocumentGetPage (document, 1);
CGContextDrawPDFPage (myContext, page);
After this the function exits. There is a button on the screen to go to the next page. In the pressed event function I do something like this:
page = CGPDFDocumentGetPage (document, 1);
CGContextDrawPDFPage (myContext, page);
The problem is the page does not show up on the screen. It only shows up if I leave the view and then come back (I have a Toolbar at the bottom of the application similar to the iPod or Clock application).
Am I missing something to get the second page to display immediately? Or is there a better way to display a PDF in my application...
Thanks.
-James

searching MS WORD > HELP > CONVERSION SETTINGS
doesn't give me anything close to this issue
any idea where to find those conversion settings ?
thanks again
k

Question re Zone Alarm and WRT54G admin page display problem

First - thanks to all who posted about Zone Alarm - I was going to exchange my router this weekend - I spent an hour on the phone with tech support and she was trying to get my router updated with v9 through a roundabout way, but I kept getting an error that said my Flash could not be erased - so she thought the firware on my router was somehow corrupted. But I'm definitely going to check out the Zone Alarm idea first.
My question is - can someone tell me exactly how to disable Zone Alarm? I thought I had done so, but I guess not - I'm not very familiar with Zone Alarm. Also - I had purchased Zone Alarm about a year ago, (was using it with a Linksys wired router) and suddenly I am getting messages on restart telling me my "trial period is up" - of course I can't find my original packaging to enter a serial number (altho one is already entered and they say it's not *valid*) so I have to select an option that tells me I am no longer protected. (unless I pay another $40 to re-register it!!) Could this be part of the problem?
Final question - sorry for being such a newbie - but do I really need both Zone Alarm and the firewall in the router? ZA says it has caught thousands of attempts on my system - while it was running with my non-wireless router installed - is that a crock? Or is actually good to have both software and hardware routers? And if I do need ZA still - does it have to be disabled everytime I want to access the admin page? Then turned back on?
ugh!
thanks -
Mary

LOL - This forum is great, I've been here 5 minutes and now have some fresh perspectives on a couple of problems.
I would NOT recommend paying for ZA. What the heck were they thinking when they created their 'Zones'? They should have named it something else for one, like 'Complicated rules and policies that are guaranteed to hack up everything you try to do (and it gets even worse when you restore the settings you tweaked back to their defaults)' But I guess that's a little too long.
Marynospam: Your Windows firewall (if ur on windows) will do a pretty good job of keeping out unwanted visitors from the Internet. It will NOT stop malware from calling out! Modern day scumbags slip you a trojan that will spy, record, copy, and call them back with whatever they want from you. If you are using Microsoft Windows DO NOT TURN OFF your 3rd party firewall! Of the firewall/security vendors I have experience with, McAfee is the best. I have only used their firewall and viruscan, and don't have experience with their 'spyware' package.

Page display problem

i have uploaded page but it is showing problem on some browsers.it's images are moved from their place .i have checked it myself on diffrent browsers but is shown correctly but my client is saying it is showing moving towards right side.
Addres of page is GLOBALUSMAN.99K.ORG

Unfortunately that page is quite a mess in all browsers for me here: IE8, Firefox, Chrome and Safari.
It's broken because of the use of APDivs to lay out the page. If you re-size the browser window you'll see that it gets worse.
Rather than trying to fix the extensive problems on that page, I suggest starting afresh with the inbuilt DW templates or some of the high quality DW templates available online.
Also, the images in the Flash slideshow are grossly distorted. That slideshow also needs rebuilding.

Adobe forms-multiple pages display problem

Hi All,
I had a query regarding the display of multiple pages in adobe 5.5 version.
I had data which suits in more than one page in adobe.But its displaying only the data in the first page.And it is displaying the empty second page also,but with no data.So any suggestions to solve this issue???

Hi,
version 5.5.1.280? It is version of Adobe Reader? If yes then you can't use this version for viewing of adobe forms (note 834573 - SAP Interactive Forms by Adobe: Acrobat/Reader version).
Another suggestion: Is subform of your first Body Page flowed (tab Object->Subform, propertie Content)? If not then content of this Body Page can't dynamically grow.
Check subforms of your Body Pages, especially tab Object->Pagination.
Regards
Michal

Script page creation problem urgent

hai all
I develop the script for print the bank cheque... but currently i gave the page size DINA4.. But I want to change it custom page size( cheque size -9cm -24cm)... so how should i create that size page plz tell me the step....how to create customer page in script ??
regard
nawa

Hi,
goto SPAD trnasaction.
Then choose Full administration and then Page formats on the DeviceTypes tab page
On next page,choose.. Change, create and fill in the fields, now replace this page format in your script, don't forget to activate it.
thanks,
Anitha

CR for Eclipse version 2.0.1 Report JSP page display problem

I create report and Report viewer JSP page. When i run JSP page I meet with this [screen|http://www.sendspace.com/file/r2ys55]. When I select print preview the [screen|http://www.sendspace.com/file/4661oa] like this.
I use CR for Eclipse all in one pack 2.0.1.
Anyone know what is the problem ?
Any help would be greatly appreciated.
Thanks;

Yes, we are. We have to set the password unless there is a way to save the password in the report. The CR designer always asks for the password. Is there away to save the password in the report from the designer?
Do you have an ETA on the bug fix?
It is good to know the problem is being looked into.
Thanks,
GregD

Display Problems - Web Pages

Hi
Forgive me - I am a 'PC' girl and am just learning about Macs - please bear with me!
I have just bought an iMac G4 256MB 800MHz with a 15 inch flat screen - running OS X 10.2.8 though I have Tiger to load onto it. Its just used in my business for Word Processing and internet access.
I am using Safari and am having trouble with some web sites page displays which work fine on my PC through IE. Images cover tabs I need to use etc. almost as if the page is too small for the content on it.
Can anyone advise me? Do I need to alter settings or something?
Many thanks in advance.
Nicky

Nickaia wrote:
... almost as if the page is too small for the content on it.
That may be exactly what's happening. Safari (and everything in OS X) has "issues"
with font sizes. When you run into a 'problem' web page, try reducing the font size,
either with "COMMAND -" (minus sign) or with *View > Make Text Smaller*.
I don't know which Safari version you're running, but there may also be a preference
setting for "+Never use font sizes smaller than <size>+" if <size> is set too large,
you'll encounter 'problem pages' more frequently.
Looby

Problems on IE for Page Displaying

GoodMoring,
I am having a display problem for a page that works correctly
on firefox but not on IE (6 or 7...) the page address is:
Page
How to fix that?
Thank you!

Hi Lan!
I don't use IE, but, while in Safari, open the Preferences by depressing the Command and Comma keys.
Click on Security.
Uncheck: Block pop-up windows.
Close Preferences.
Good Luck! And Enjoy Your Power Bars!
ali b

Page display pblm with styles

Hello
I have an html file in an application directory of Tomcat.
When I open the file in a browser(like File->Open..), the page display is correct.
I mean it takes the Scripts, Styles directory into consideration and displays correctly.
But when I open this html file using http://localhost:8080/myProject/abc.html , it displays the page
with all controls like buttons, textfileds etc. However it is not shown based on the style
specified in the Styles folder.
What could be the reason?
Note: This application is copied from some other system and the style reference is correct. i.e:
<LINK rel="stylesheet" type="text/css" href='../style/default.css'> and the style folder is in the parent directory
Pls help

Oops!!! Got it corrected.
The problem was this : <LINK rel="stylesheet" type="text/css" href='../style/default.css'>
and the folder name was Style.
thnx

Page display pblm

Hello
I have an html file in an application directory of Tomcat.
When I open the file in a browser(like File->Open..), the page display is correct.
I mean it takes the Scripts, Styles directory into consideration and displays correctly.
But when I open this html file using http://localhost:8080/myProject/abc.html , it displays the page
with all controls like buttons, textfileds etc. However it is not shown based on the style
specified in the Styles folder.
What could be the reason?
Note: This application is copied from some other system and the style reference is correct. i.e:
<LINK rel="stylesheet" type="text/css" href='../style/default.css'> and the style folder is in the parent directory
Pls help

Oops!!! Got it corrected.
The problem was this : <LINK rel="stylesheet" type="text/css" href='../style/default.css'>
and the folder name was Style.
thnx

Changing Page Display Preferences

Is there a way to change the page display preferences for all PDFs using the registry or something that can be scripted on install.
I want to hide the navigation panel buttons on the left and untick the "Create Links from Urls" checkbox..
Any help is most appriciated.
Thanks
DevStu

I think I've figured out how to solve this pixelation problem. Apparently the problem is not specific to Acrobat, but can arise with some older programs that weren't designed for Windows 8 (see more here). The solution is to follow the steps outlined in that link: pin Acrobat to the task bar, right click and select Properties and then the Compatibility tab, then make sure the box next to "Disable display scaling on high DPI settings" is checked. Voila, now the Acrobat 10 interface appears in beautiful high resolution.
I hope this helps anyone who might have this problem down the road!

My original post, locked by this forum. Display problem related

Hi G5 Gurus,
The display problem first, we all know when screen savers display, a click on the mouse will bring you back to the active desktop, this was how it worked., but now, sometimes a click cause the G5 to sleep!
As for the sleep, I dare not to put it to sleep these days, because I am afriad it may cause a fire by over heating. Sometmes, actually four times in the past few months, my G5 could wake up by itself, followed by a extrem high speed running of the cooling fan, it sounded like a hair dryer running in the same room. Sometimes the sreen could light up, just like real wake up, sometimes, it was black. No clicks the mouse or keyboeard could bring it back to normal, I had to press and hold the power button to turn it off.
This crazy problem happened for the first time last summer, a dead hard disk was the cost. Apple replaced it, but failed to detect the cooling or power or display problem. I was given one month extended free service, but right after its end, the problem was back and happened even more often.
Please let me know if any of you had the same problem and please advise what to do.
100s Gs of thanks.
Songyan
iMac G5 Mac OS X (10.4.8)
la teller
Posts: 1
From: Los Angeles
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 10, 2007 2:21 PM in response to: Bad luck G5
I have the EXACT same problem. In fact, I could not have described it better myself. What gives? I brought it in to the "genius" bar and they repolaced the power supply free of charge but the problem is still there. I noticed they ordered a new logic board but did not end up replacing it after all. Did you have yours replaced and did it work? Is this a known issue?
imac G5 17 inch Mac OS X (10.3.9)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 11, 2007 1:20 PM in response to: la teller
Hi La teller,
Thank you for your reply. The 'genius' here in London only replace the dead hard disk, which I belive was a victim of this problem. I was told they couldn't find anything wrong with the power supply or the cooling system.
Now at lest I know I am not the only bad luck guy. Let's wait and see if others are having the same problem. I am not sure if this is a known issue to Apple, even if it is, it may take years before they can offer a recall or free repaire. I noticed that some G5s have already been suffering from power problems and a free repaire was offered.
Thank you again and hope Apple can take our concerns into their consideration soon.
Songyan
iMac G5 Mac OS X (10.4.8)
stopha6
Posts: 1
From: US
Registered: Jan 12, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 12, 2007 7:43 AM in response to: Bad luck G5
Hello,
I'm also having this problem (fan running, won't come out of sleep), just spoke with an apple care rep. He confirmed my suspition that it was software, not hardware as I have just had the logic board and power supply replaced.
His suggestions were to:
1. Run disk repair from the startup CD
try running OS X from a firewire drive and see if the same behavior happens or
perform and archive and install.
When the fan starts to run like that it means the OS is not communicating with the hardware properly. The OS could be somewhat corrupt if you were having hardware issues beforehand, hence the need for a reinstall. I will be performing an archive and install after the disk repair, I'll let you know if it fixes the problem!
iMac G5 Mac OS X (10.4.8)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 14, 2007 12:52 PM in response to: stopha6
Hi Stopha6,
Thank you for your message. I never imagined it could be a software issue, cos it looked so hardware.
Please keep me updated with your progress.
By the way, as I said in my old posts, a hard disk went dead when this happened for the very first time, how do you read this?
Thank you.
Songyan
iMac G5 Mac OS X (10.4.8)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 15, 2007 6:58 AM in response to: stopha6
Hi Stopha6,
After reading your reply again, I realized that the system had already been reinstalled. As I said when it happened for the first time, the hard disk died with it, which was replaced, of course with a new OS X, but the same problem is still happening. May this suggest that it is not just a software problem? Thank you. Songyan
iMac G5 Mac OS X (10.4.8)
AG-Nate
Posts: 5
From: Pismo Beach,CA
Registered: Aug 26, 2006
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 14, 2007 3:38 PM in response to: Bad luck G5
The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on. The screen-saver and sleep problem you describe sounds like something that may just happen on accident. But this sounds mostly like a software problem. Try making sure to always quit all non-apple products and see if anything changes.
eMac, iMacG5 Mac OS X (10.4.7) 800mhz 1gig ram, 2ghz 2gigs of ram
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 15, 2007 6:50 AM in response to: AG-Nate
Thank you, Ag-Nate. I will try as you adivised but I con't think the fans were activeted my intensive CPU using. In most of the cases, the problems happened when the Mac was sleeping, when the minimum CPU were being used.
iMac G5 Mac OS X (10.4.8)
Timothy Klein
Posts: 15
From: Denver, CO, USA
Registered: Dec 6, 2004
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 31, 2007 1:02 PM in response to: AG-Nate
"The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on."
That's only partly right. A hard-working process will make the fans run at high speed, of course.
But, the OS is in touch with the firmware of the iMac, telling it how to run the fans, based upon information the OS X kernel is getting about the state of the hardware.
If the firmware loses touch with the OS for some reason, and is not getting instructions on how to run the fan, it will default to running them at full blast, to be on the safe side (and this "full blast" fan mode is way louder than anything you'll generally experience during normal usage, I know from experience).
So it may not be so simple as a hard-working cpu process kicking the fans on.
iMac G5 17" 1.6 GHz Rev. A Mac OS X (10.4.8) 1 GB Ram
Kensall
Posts: 2
From: London, England
Registered: Feb 2, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Feb 2, 2007 9:05 AM in response to: Timothy Klein
Hi I have a 20" G5 imac it's about 18 months old and I am having the same problem, It freezes and the fan runs really loud. It's nothing to do with software as my I.T. guy has done a complete re-install. All of our admin people have imacs of differring ages and the flat panels are all OK but every one of the G5s has had a booting problem. Some fell into the recall for replacement logic boards but the one I have at home is the newest and doesn't. I'm waiting for my apple reseller to get back to me, but it looks like it's the logic board and as none of the serial numbers fall into the recall, I'm expecting a big bill. I'm really disappointed as I've been a professional apple user for over 15 years and have grown to expect a certain amount of honesty and integrity from them. Looking at all of the discussion boards and the amount of people complaining of the same problem the logic boards are defective and apple should be replacing these free of charge.
i mac G5 Mac OS X (10.4.8)
a brody
Posts: 15,170
From: Silver Spring, Maryland. Don't forget to backup your data!
Registered: Dec 23, 2000
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Feb 2, 2007 10:27 AM in response to: Kensall
Kensall,
Welcome to Apple Discussions!
As in the other thread I wrote:
Being from England, you may find the repair program under these pages:
http://www.apple.com/uk/support/imac/repairextensionprogram/
http://www.apple.com/uk/support/imac/powersupply/repairextension/
Check both of them as they refer to different models.
If neither of yours is under the program, please start a new topic thread so someone can help you.
http://discussions.apple.com/forum.jspa?forumID=881
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.
iMac C2D 2.17/20 inch/iMac G5 1.8 1st gen/iMac G4 800 Mac OS 9 Mac OS X (10.4.8) EyeTV 200, Canon PS A530 , Epson P-R220, iSight, Airport Extreme, 5th Gen iPod

I am having a very similar problem. My G5 imac has already had the logic board replaced from the leaking capacitor problem. 8 mos. later the power supply was replaced under the second recall program when it failed to start up.
It had been working now for almost a year, when about 3 mos. ago I started to experience the sudden dimming effect - if the display was untouched the screen would dim about 30% similar to a laptop in energy save mode. I checked and none of these types of options were set in the pref panes. At the same time I would have the iMac go to sleep after a while from non-use, and then when I tried to wake it it would stir for a few seconds and then go right back to sleep. It took 2-3 attempts to wake it up.
Then last week, as I tried to wake it, it just shut down instead completely. I had to hold the power button down to recycle it to get it to come back to life (3 times).
Today was it - I found what I thought was a sleeping iMac, but it will not power up at all. I opened the back cover and the power supply is working, but I cannot get the board to energize, I reset the PMU, but the #2 LED won't even blink. It is completely dead.
Basically every time I used this computer I held my breath that it would not work. After 2 recalls I still only get 9 mos. out of it? Apple is really starting to show it is like the "big" computer makers, the quality is going right down the tubes.
iMac G5 Mac OS X (10.4.4)

Animated gif and page refresh problem

Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
     //setTimeout("refresh()", 1000);
     setTimeout("location='status.jsf'", 1000);
<% }else{%>
     window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
     <script LANGUAGE="JavaScript">
          refresh();
     </script>
</head>
<body>
     <img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>

Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
     //setTimeout("refresh()", 1000);
     setTimeout("location='status.jsf'", 1000);
<% }else{%>
     window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
     <script LANGUAGE="JavaScript">
          refresh();
     </script>
</head>
<body>
     <img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>

Windows 7 64 bit on iMac display problems and instability

I received my iMac 27" quad core with 8 gig ram & 2 x 1 TB hard drives last Friday. I'm using Boot Camp to run windows 7 64 bit on maximum 2560 x 1440 screen resolution.
I get intermittent but often display problems in windows 7. I get areas of the screen covered in little yellow dots or blue squares (never red artefacts.) This will happen at random areas of the screen, inside an open window, around borders of windows and so on. Most often the screen will go black and come back with a message in the bottom right corner of the screen saying 'Display driver has stopped responding and has recovered' with the sub message saying 'display driver ATI radeon family stopped....etc'. Sometimes I lose the screen wallpaper. Once I've had the system just shut down, once I've had Photoshop seize up and I had to do a cold reboot. Could this be an overheating problem or resolution too high problem or driver problem? Windows 7 tells me my drivers are up to date. I tried installing the drivers for the card from ATI's website which made no difference
The reason I bought a Mac is because it's the only effective way to code for the Mac family of OS's in XCode. The reason I didn't just attach a miniMac to my PC monitor was because there's rather a lot of advertising by Apple about the fact that you can use a Mac with a PC OS via Apple's own Boot Camp. Now I have a lot of Windows software (some of which is not available for the Mac or requires buying again) sitting on an unstable system. Any ideas would be much appreciated...

Sorry, that thread got moved for edit and as a user tip... which I didn't want and won't be doing....
Here is the post:
A tip and workaround for how to get ATI mobility/laptop drivers so that Windows no longer thinks the ATI is a desktop card:
http://discussions.apple.com/thread.jspa?messageID=11286987
Summary (my own edit steps):
1. Install Boot Camp 3.0 and upgrade to 3.1
2. Uninstall graphic drivers and run Driver Sweeper
http://www.guru3d.com/category/driversweeper/
instead of:
removing the crashing driver by going into windows 7 setup via its install cd and deleting the ati driver manaully
3. Install ATI Mobility (link)
4. Uninstall ATI (Programs control panel?) Device Manager (rollback; uninstall?)
5. Device Nanager: update driver and BROWSE BACK to 8.681 (the original apple driver that was causing freezes and purple artifacts) - navigate to /Apple/Drivers/ATI
(Apple uses) a 4850 card in the iMac, its modified a bit for apple. Enough that desktop drivers don't work, and modded-for-laptop desktop drivers don't work either.
Now the upshot of using modified drivers is that it FORCES the catalyst control panel to be installed, meaning you get a few more options to mess around with the card.
I couldn't use the original apple drive, it locks up, the newer one had banding, the newer radeon drivers direct form ATI wouldn't work until they were modded and then they cause black screens.
SO the solution, as obscure as it was, was to download ACTUAL mobility Radeon drivers - version 10.3 still, but made for laptops.
http://support.amd.com/us/gpudownload/Pages/index.aspx
THESE drivers I was able to install - and here is where things changed.
THIS driver changed they way windows saw the video card in device manager.
As I mentioned before, its NOT a desktop card, its a modified laptop card, but installing mac drivers makes windows THINK its a full desktop card, and running the original 8.681 driver crashed it.
Once installed 10.3 LAPTOP driver it now appeared in device manager as a MOBILITY card.
+These Steps "should" work:+
delete ATI driver manually
reinstall apple driver after that and see if that works,
otherwise try the steps above
(mod drivers, remove via windows recovery off setup disk, install laptop drivers, reinstall apple driver over it)

Script Page Display Problem

Similar Messages

Maybe you are looking for