Scripting from H4 to H3 or Header

If I have a bunch of documents made in Acrobat X, I need to write a script that will change the H4 tags to an H3 or Header tag so that the nesting warning will go away. The document reads perfectly.
The way that I am doing this manually, it with the touch up text, show order panel, right click on the element, select properties, then changing each one from H4 to H3 or header.
There must be a way to automate this through an action wizard, probably with javascript.
Regards,
Rick

Issue resolved.
Kumar Saurav.

Similar Messages

Protecting my script from spanners ???

Protecting my script from spammers ????
I am a newbie. I am using DW CS5. I have a members register form and a database for the users set up. I use the DW service behavior of “recordset” and “insert record” to add the new users from the form to the database. All works well except for one (?) problem.
A book I was reading suggested that I should test to make sure that no illegal characters are inserted in the user submitted values by using the lines of code below to strip slashes from the input before updating the database. I would have thought the DW did this as part of their standard code. But when I test DW by adding some illegal characters in one of my values, the illegal characters still show up in my data when I view the table using phpMyAdmin.
I have tried to add this code (with and without some modifications) to the “standard” DW code (this code is located at the end of this posting) generated by DW without any success. DW gives me an error if I make ANY change to the “standard” DW code.
My questions:
1.   Does the “htmlentities” function and the “get_magic_quotes_gpc() “ in the DW code do the same or similarly job of stripping illegal characters from the fields? If so, why is the get_magic_quotes_gpc only applied for less than PHP- 6 ?
2.   If yes, why do I still see the slashes in my data when I view it with phpMyAdmin?
3.   What is the best way to protecting my script from spammers inserting illegal characters in my scrip using the tools that comes with DW CS5? Or should I use some other method?
…………. strip some slashes code to add to DW code …………..
// Define post fields into simple variables
$first_name = $_POST['first_name'];
$last_name = $_POST['last_name'];
$email_address = $_POST['email_address'];
$username = $_POST['username'];
$info = $_POST['info'];
/* Let's strip some slashes in case the user entered
any escaped characters. */
$first_name = stripslashes($first_name);
$last_name = stripslashes($last_name);
$email_address = stripslashes($email_address);
$username = stripslashes($username);
$info = stripslashes($info);
…………. DW standard insert code…………….
<?php require_once('../Connections/ndc_olcs.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "frJoin")) {
$insertSQL = sprintf("INSERT INTO users (first_name, last_name, email_address, username, info, user_level, signup_date) VALUES (%s, %s, %s, %s, %s, %s, %s)",
                       GetSQLValueString($_POST['first_name'], "text"),
                       GetSQLValueString($_POST['last_name'], "text"),
                       GetSQLValueString($_POST['email_address'], "text"),
                       GetSQLValueString($_POST['username'], "text"),
                       GetSQLValueString($_POST['info'], "text"),
                       GetSQLValueString($_POST['user_level'], "text"),
                       GetSQLValueString($_POST['signup_date'], "date"));
mysql_select_db($database_ndc_olcs, $ndc_olcs);
$Result1 = mysql_query($insertSQL, $ndc_olcs) or die(mysql_error());
$insertGoTo = "../user_list.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
    $insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
mysql_select_db($database_ndc_olcs, $ndc_olcs);
$query_rsJoin = "SELECT * FROM users";
$rsJoin = mysql_query($query_rsJoin, $ndc_olcs) or die(mysql_error());
$row_rsJoin = mysql_fetch_assoc($rsJoin);
$totalRows_rsJoin = mysql_num_rows($rsJoin);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
The form’s HTML code continues from here……
Thank you.

Relying on an editor like DW to protect your DB or spam attacks is not a good idea. Spammers and those that wish to attack your database work at it as a full time occupation, so when some new protective script comes along, they work on overcoming it.
"" If so, why is the get_magic_quotes_gpc only applied for less than PHP- 6 ?""
Magic quotes are deprecated and will not be in PHP6.
I would suggest using this for your email variable:
$email = filter_input(INPUT_POST, 'email', FILTER_VALIDATE_EMAIL);
I would look up "re-captcha" and "honey pot' for some additional security.
Here is something I put together some time back, it is not complete or comprehensive and more research should be done, but it might help you to understand a little better.
http://www.paulgdesigns.com/secure.php
HTH
Gary

Ssrs and script from was blocked due to mime type mismatch

Hi
I'm trying to add a script to my header on my SSRS report. I've been following this link:
http://blogs.infosupport.com/reporting-services-javascript-injection/
I get error stating:
SEC7112: Script from http//####/HCCReportsServer?/ReportsLibrary/script.js was blocked due to mime type mismatch
My code:
="<a href=""javascript:eval(unescape('function addScript(scriptFile){var head = document.getElementsByTagName(\'HEAD\')[0]; var script = document.createElement(\'script\'); script.setAttribute(\'language\', \'JScript\'); script.setAttribute(\'type\', \'text/Javascript\'); script.setAttribute(\'src\', scriptFile); head.appendChild(script);} addScript(\'http://dc1-sqlrs-d02/HCCReportsServer?/ReportsLibrary/script.js\');'))"">inject</a>"
Please help. This is urgent to get it working for a demo.
Thanks

Hi Sunette,
Based on my understanding, you come across an SEC7112 error when you inject JavaScript into the Reporting Services.
In your scenario, you should remove the below setting in the web.config file(Location: C:\inetpub\wwwroot\wss\VirtualDirectories\<your port>).
<add name="X-Content-Type-Options" value="nosniff" />
As we tested in our environment(SQL Server 2012,SharePoint 2013,IE 11), we can inject JavaScript successfully. Please refer our test steps and results:
1. Delete “X-Content-Type-Options" with value "nosniff" within the web.config file (Location: C:\inetpub\wwwroot\wss\VirtualDirectories\80).
2. Design the report as below, then deploy the report to the SharePoint site.
3. Create the script.js file with code below, and upload to the SharePoint site.
function test()
alert("The CHANGEME textbox will actually change…");
//var doc = window.frames[1][1].document;
var el = document.getElementsByTagName('span');
for (var nr=0; nr<el.length; nr++)
if (el[nr].innerHTML == "CHANGEME")
el[nr].innerHTML = "I FEEL LIKE A CHANGED TEXTBOX";
4. Run the report. Click the “inject”->”test”, the final results should look like below:
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Execute sql script from apex

hi all
i have dir /usr/tmp which there i have script in sql that creats a report
in the command line i'm running the script like this :
sqlplus user/passwd@db @name_of_script
my goal is to run this script thru the apex
i tried to create some process
before header like this
:p116 := sqlplus user/passwd@db @/usr/tmp/name_of_script ;
doesn't work!!
i even try to put this action in table but then i don't know how to run this ?
can it executed in apex ? if yes then how ?
thanks a lot

I checked the link and it did not work, so I am reposting my original reply below.
had a requirement to run a Fortran program against some data that woudl be extracted from the database after the user set up their filtering criteria and made some additional input. SInce the program was to complex to conver to PL/SQL, we decided to try and invoke it from Apex. This is how I did it.
1. I followed the steps in Tim Archer's excellent article "Oracle External Procedure to Run Host Commands" (http://www.timarcher.com/?q=node/9). If the link does nto work, google the article's title.
Using this steps I created a function which accepts any OS command, including calling my own shell scripts, and runs them. I called my PL/SQL function "shell" instead of "USF_RUN_HOST_CMD " as Tim did in his example (step 9).
2. In Apex,
a. I created a button to run my shell command. (I named it P2_RUN_SHELL)
b. I created a PL/SQL process whose source looks as follows:
shell('/home/ackness/scripts/cr_xcf_file.sh > /tmp/cr_scfp_file.log');
and which was conditioned on the the button P2_RUN_SHELL.
It works like a charm.
Note: since you can run your own scripts using this method, you can encapsulate a series of commands in a UNIX shell script and invoke that script from Apex. This allows you to be able to test or run you commands from the command line as well as Apex and makes it easier to develop/debug/enhance the scripts in the future.
Ackness

Generate SQL scripts from Designer 6

Hi all,
Does anyone know how to generate an SQL-script from Designer? I want to maintain the code in the repository, and also document usages against the script. I've found ways to document the script, but then I can't generate it....
Thanks in advance,
Ronald

Ronald,
How did you record the SQL script in designer? As undefined pl/sql module (type= "null")?
If so, you cannot generate the script with the ddl generator. To do so you could change the type to procedure and make post-generation changes to the script (cut of f the procedure header and trailer lines). An other way to generate it is to write your own SQL script generator as a headstart utility. You might take a look at the html help file generator utility which does a similar job (create a o/s file based on the repository contents).
Let us know if you succeed.
Regards, Marc
null

Executing SAP GUI Script From a Web Page

I have an issue when trying to execute some javascript (sap gui script) from a webpage.
When the javascript is executed I get the message:
automation server unable to create object.
However, this exact same javascript when placed in a text file and double-clicked executes just fine through the windows scripting host.
Does anyone have an example of gui script code executing from a webpage? Or any ideas on why it isn't working from the webpage? Both scenarios should be executing the code on the local machine through WSH.
Below is the javascript as well as the webpage executing the javascript:
SAPGUI SCRIPT
if (typeof(application) == "undefined")
   sapgui      = GetObject("SAPGUI");
   application = sapgui.GetScriptingEngine;
if (typeof(connection) == "undefined")
   connection = application.children(0);
if (typeof(session) == "undefined")
   session = connection.children(0);
if (typeof(WScript) != "undefined")
   WScript.connectObject(session, "on");
   WScript.connectObject(application, "on");
session.findById("wnd[0]").maximize();
session.findById("wnd[0]/tbar[0]/okcd").text = "/nzsd1067";
session.findById("wnd[0]").sendVKey(0);
session.findById("wnd[0]/usr/ctxtVBAK-KUNNR").text = "6343";
session.findById("wnd[0]").sendVKey(0);
WEBPAGE
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
     <head>
          <title></title>
          <meta name="GENERATOR" content="Microsoft Visual Studio .NET 7.1">
          <meta name="vs_targetSchema" content="http://schemas.microsoft.com/intellisense/ie5">
          <! INPUT PARAMETER SETTINGS:
          To Push data to Siebel or SAP the appropriate
          field below must be set = TRUE.
          Pop_SAP
          Pop_Siebel
          SIEBEL INPUT PARAMETER: When
          Pushing data to a Siebel screen the Query_Type should be set based on the type
          of lookup that is requested.
          Query_Type = 'SAP' -presents a screen based on a customer SAP Id.
          Query_Type = 'SR' -presents a screen based on a Service Request.
          Query_Type = '' or null -presents a search screen to locate the proper contact in Siebel
          APP_SAP_ID -SAP customer Id
          APP_SR_NUM -Siebel Service Request Number
          >
<SCRIPT LANGUAGE="VBScript">
Sub LoadContact()
        'Siebel Application Object
        Dim siebApp 'As SIEBELHTMLLib.ISiebelHTMLApplication
        Dim siebSvcs 'As SIEBELHTMLLib.ISiebelService
        Dim siebOutputPropSet 'As SIEBELHTMLLib.ISiebelPropertySet
        Dim siebInputPropSet 'As SIEBELHTMLLib.ISiebelPropertySet
        Dim bool 'As Boolean
        Dim errCode 'As Integer
        Dim errText 'As String
        Dim QueryType 'As String
     Dim PopSAP 'As String
     PopSiebel = "TRUE"
     If PopSiebel = "TRUE" Then
          QueryType = "SAP"
          If QueryType = "null" Then
               QueryType = ""
          End If
             'Create The SiebelHTML Object
             set siebApp = CreateObject("SiebelHTML.SiebelHTMLApplication.1")
             If Not siebApp Is Nothing Then
                 'Create A New Property Set
                 set siebInputPropSet = siebApp.NewPropertySet
                 set siebOutputPropSet = siebApp.NewPropertySet
                 If Not siebInputPropSet Is Nothing Then
                     siebInputPropSet.SetProperty "ANI", "9738986011"
                     siebInputPropSet.SetProperty "SAP_ID", "0000516616"
                     siebInputPropSet.SetProperty "SR_NUM", "null"
                     siebInputPropSet.SetProperty "Interaction_ID", "168608840053"
                     siebInputPropSet.SetProperty "Query_Type", QueryType
                 Else
                     errCode = siebApp.GetLastErrCode
                     errText = siebApp.GetLastErrText
                         MsgBox "Could not Create Siebel Property Set: " & errCode & "::" & errText
                 End If
                 'Get A Siebel Service
                 set siebSvcs = siebApp.GetService ("TAWBS")
                 If Not siebSvcs Is Nothing Then
                     siebSvcs.InvokeMethod "TAWPresentAccount", siebInputPropSet, siebOutputPropSet
              Else
                     errCode = siebApp.GetLastErrCode
                     errText = siebApp.GetLastErrText
               MsgBox "Could not Get Siebel Service: " & errCode & "::" & errText
                     End If
                 set siebApp = Nothing
             End If
             set siebInputPropSet = Nothing
             set siebOutputPropSet = Nothing
             set siebSvcs = Nothing
     End If
End Sub
</SCRIPT>
<SCRIPT LANGUAGE="javascript">
function loadSAP()
     if (typeof(application) == "undefined")
          sapgui      = GetObject("SAPGUI");
          application = sapgui.GetScriptingEngine;
     if (typeof(connection) == "undefined")
          connection = application.children(0);
     if (typeof(session) == "undefined")
          session = connection.children(0);
     if (typeof(WScript) != "undefined")
          WScript.connectObject(session, "on");
          WScript.connectObject(application, "on");
     session.findById("wnd[0]").maximize();
     session.findById("wnd[0]/tbar[0]/okcd").text = "/nzsd1067";
     session.findById("wnd[0]").sendVKey(0);
     session.findById("wnd[0]/usr/ctxtVBAK-KUNNR").text = "0000516616";
     session.findById("wnd[0]").sendVKey(0);
} // end
</SCRIPT>
</head>
     <body onload="loadSAP()">
          <H3><FONT face="Arial" size="5">Raytheon Integration Screen</FONT></H3>
          <HR style="WIDTH: 882px; HEIGHT: 8px" color="#3366cc" SIZE="8">
          <form id="ValidForm" onsubmit="LoadContact(); return false;" language="jscript">
               <FONT face="Arial">Load Siebel Screen</FONT> <! <input name="Text1" TYPE="TEXT"
               SIZE="10" ID="Text1"> <input name="Submit" TYPE="submit" VALUE="Submit" ID="Submit1">
          </form>
          <form id="Form1" onsubmit="loadSAP(); return false;" language="javascript">
               <FONT face="Arial">Load SAP Screen</FONT>    <! <input
               name="Text2" TYPE="TEXT" SIZE="10" ID="Text2"> <input name="Submit" TYPE="submit" VALUE="Submit" ID="Submit2">
          </form>
     </body>
</html>

Hi Bernd,
the following code works in VBS. If you run saplogon.exe you'll get a message box saying '/app'.
Set Wrp = CreateObject ("SapROTWr.SapROTWrapper")
Set SapGui = Wrp.GetROTEntry ("SAPGUI")
Set application = sapgui.GetScriptingEngine
MsgBox application.id
I haven't tried it on a web page, but I don't see why it shouldn't work there. Ok, maybe the MsgBox is command is not available.
Best regards,
Christian

Run PowerShell script from C# writing to input pipe

Hello,
I am trying to run a PowerShell script from C# (I have no control over what's in the script). The script may have a prompt like "Press enter to continue". So my goal is:
1. Get text output from the script (easy, many examples available)
3. If output contains "Press enter to continue", write a blank line to the running script's pipe to make it finish its job and quit
4. If output does contain that prompt, just let it exit by itself without sending any input
Note that commands in this PS script also try to get at script's file path, so I can't read script from file and pass it as text. It has to be executed as a script so it knows where it's located.
I have done this with .exes and batch files before. All you do in that case is process.StandardInput.WriteLine() which "types" enter into the input stream of script you are trying to control. But this does not work with Power Shell. How do I do this?
I have tried using PS object model like so:
using (Pipeline pipeline = runspace.CreatePipeline())
Command command = new Command(scriptPS, true, true);
   pipeline.Commands.Add(command);
   pipeline.Commands[0].MergeMyResults(PipelineResultTypes.Error, PipelineResultTypes.Output);
   pipeline.Input.Write("\n");
   Collection<PSObject> psresults = pipeline.Invoke();   //...
But I get an error because the script prompts:
"A command that prompts the user failed because the host program or the command type does not support user interaction. Try a host program that supports user interaction, such as the Windows PowerShell Console or Windows PowerShell ISE, and remove prompt-related
commands from command types that do not support user interaction, such as Windows PowerShell workflows."
I also tried using Process, and running PowerShell with -File switch to execute the script, then write to StandardInput with C#. I get no errors then, but the input is ignored and doesn't make it to PowerShell.
Please help!

No man, what kind of answer is that? You should have left it unanswered rather than waste people's time like this. I already seen those links before I posted my question. They address the issue of specifying script parameters, but not
writing to the input pipe.
Fortunately I did figure this out by writing a custom script host for PowerShell. Anyone interested can read about this in detail on MSDN (fortunately simple material with samples you can copy paste as I did, so this solution takes little time to implement).
Implement PSHost interface. Nothing special here, just paste directly from MSDN sample and modify their SetShouldExit function definition to contain just a "return;". Here's the relevant link:
http://msdn.microsoft.com/en-us/library/windows/desktop/ee706559(v=vs.85).aspx
Implement PSHostUserInterface interface. This is the ticket to solving this problem
(see below). Here's the MSDN link:
http://msdn.microsoft.com/en-us/library/windows/desktop/ee706584(v=vs.85).aspx
Implement PSHostRawUserInterface. This may not be required (not sure) but I did anyway. Nearly a direct paste from MSDN:
http://msdn.microsoft.com/en-us/library/windows/desktop/ee706601(v=vs.85).aspx
So, there are two PSHostUserInterface function implementations that are of particular interest. First is Prompt (read header comment to see why):
/// <summary>
/// When script attempts to get user input, we override it and give it input programmatically,
/// by looking up within promptInput's dictionary<string,string> or lineInput array.
/// PromptInput dictionary is mapped by input prompt (for example, return "" in response to "Press ENTER to continue")
/// LineInput is a regular array, and each time the script wants to prompt for input we return the next line in that array;
/// this works much like piping inputs from a regular text file in DOS command line.
/// </summary>
/// <param name="caption">The caption or title of the prompt.</param>
/// <param name="message">The text of the prompt.</param>
/// <param name="descriptions">A collection of FieldDescription objects that
/// describe each field of the prompt.</param>
/// <returns>Throws a NotImplementedException exception.</returns>
public override Dictionary<string, PSObject> Prompt(string caption, string message, System.Collections.ObjectModel.Collection<FieldDescription> descriptions)
Dictionary<string, PSObject> ret = new Dictionary<string, PSObject>();
foreach (FieldDescription desc in descriptions)
if (this.promptInput.Count != 0)
ret[desc.Name] = new PSObject(this.promptInput[desc.Name] + "\r\n");
else if (this.lineInput != null && this.currentLineInput >= 0 && this.currentLineInput < this.lineInput.Length)
ret[desc.Name] = new PSObject(this.lineInput[this.currentLineInput++] + "\r\n");
else
if (desc.DefaultValue == null)
ret[desc.Name] = new PSObject("\r\n");
else
ret[desc.Name] = new PSObject(desc.DefaultValue);
return ret;
Next is PromptForChoice. Here I opted to always return the default choice, but you could rewrite it to read from somewhere to "simulate" reading from input pipe just like the function above:
public override int PromptForChoice(string caption, string message, System.Collections.ObjectModel.Collection<ChoiceDescription> choices, int defaultChoice)
        return defaultChoice;
Last but not least, here's a ReadLine implementation (again read header comment):
/// <summary>
/// If the LineInput is set, "read" the next line from line input string array, incrementing line pointer/// </summary>
/// <returns>The characters that are entered by the user.</returns>
public override string ReadLine()
if (this.lineInput != null && this.currentLineInput >= 0 && this.currentLineInput < this.lineInput.Length)
return this.lineInput[this.currentLineInput++];
else
return Console.ReadLine();
Both are exposed as properties:
/// <summary>
/// Gets or sets the input pipe override
/// </summary>
public string Input
get
return string.Join("\n", this.lineInput);
set
if (value != null)
this.lineInput = value.Split('\n');
this.currentLineInput = 0;
else
this.lineInput = null;
/// <summary>
/// Gets or sets input pipe override for named prompts
/// </summary>
public Dictionary<string, string> PromptInput
get
return this.promptInput;
set
this.promptInput = value;
And finally, here's how the whole shebang is used:
/// <summary>
/// Runs a powershell script, with input pipe arguments
/// </summary>
/// <param name="script">Path of the script to execute, or script text</param>
/// <param name="inline">Whether or not to execute script text directly, or execute script from path</param>
/// <param name="unrestricted">Whether or not to set unrestricted execution policy</param>
/// <param name="parameters">Parameters to pass to the script command line</param>
/// <param name="inputOverride">Input to pass into the script's input pipe</param>
/// <param name="inputOverrideName">Input to pass into the script's input pipe, to each prompt by label</param>
/// <returns>Output lines</returns>
public static string PowerShell(string script, bool inline, bool unrestricted = false, Dictionary<string, string> parameters = null, string inputOverride = null, Dictionary<string, string> inputOverrideByName = null)
string output = null;
ScriptHost host = new ScriptHost();
(host.UI as ScriptHostUserInterface).Input = inputOverride;
(host.UI as ScriptHostUserInterface).PromptInput = inputOverrideByName;
using (Runspace runspace = RunspaceFactory.CreateRunspace(host))
runspace.Open();
if (unrestricted)
RunspaceInvoke runSpaceInvoker = new RunspaceInvoke(runspace);
runSpaceInvoker.Invoke("Set-ExecutionPolicy Unrestricted");
using (Pipeline pipeline = runspace.CreatePipeline())
if (inline)
pipeline.Commands.AddScript(script);
else
Command command = new Command(script, true, true);
foreach (KeyValuePair<string, string> param in parameters)
command.Parameters.Add(param.Key, param.Value);
pipeline.Commands.Add(command);
pipeline.Commands.Add("Out-String");
pipeline.Commands[0].MergeMyResults(PipelineResultTypes.Error, PipelineResultTypes.Output);
Collection<PSObject> psresults = pipeline.Invoke();
var sb = new StringBuilder();
foreach (PSObject obj in psresults)
sb.AppendLine(obj.ToString());
output = sb.ToString();
pipeline.Dispose();
runspace.Close();
return (host.UI as ScriptHostUserInterface).Output + "\r\n" + output;
As you can see, I also did some magic with the .Output property. That just accumulates lines of text output by the script in every WriteXXX function implemented in your custom PSHostUserInterface. The end result of all this, is that if you have a script
that has prompts, choices or reads from standard input, you can execute the script within the context of your custom script host written as above, to control precisely what strings are passed to it in response to prompts.

Migrating Shell scripts from HP-Unix 11i to OEL 5.0

Hi :
We recently migrated the databases from a HP-Unix server 11i to OEL 5.0 Server. As a part of the move we also had to migrate the shell scripts from Unix.
The source scripts uses B-Shell and when we try to run this on OEL nothing works. It looks like we may have to rewrite for BASH or KORN Shell in OEL 5.0.
I have very limited experience in writing shell scripts and need expert guidence on how the existing script could be modified to work in Linux. Any useful pointer would be great help.
Regards,
Bala

BMP wrote:
Hi :
We recently migrated the databases from a HP-Unix server 11i to OEL 5.0 Server. As a part of the move we also had to migrate the shell scripts from Unix.
The source scripts uses B-Shell and when we try to run this on OEL nothing works. It looks like we may have to rewrite for BASH or KORN Shell in OEL 5.0.
I have very limited experience in writing shell scripts and need expert guidence on how the existing script could be modified to work in Linux. Any useful pointer would be great help.
Regards,
BalaI assume you mean 'Bourne shell' ... though possibly you have Posix (which is meant to be close to ksh).
In general ... with exceptions ... ksh and bash are a superset of (bourne shell).
Two things can help:
[1] Check the first line in the scripts and indicate what it is .....
head -1 some-shell-script.
Does hte she-bang command exit on OEL?
[2] Post one or show of the error messages here.
... It is possilbe you are getting one basic error/problem repeated everywhere rather than a lot of different eror messages
If you give examples ... without compromising your security .. that may be a more focused answer

How do I add multiple scripts from search engines to my meta tag properties?

I currently have copied the goolge script for website varification and analytics, etc and pasted it into my meta tag properties dialog box. There is no problem as far as Google varifying the page. However, I would like to copy Bing's search engine script into my meta tag in addition to Googles script. How do I go about doing this? Do I hit the return on my keyboard under the ending of Googles script, then paste in the Bing script?
The the last part of the Google script ending in this:
</script>
(paste new script from Bing here?)
Will this cancel out each other and cause problems?
Can someone walk me through this process, because Bing's search engine will not varify my site through two of the three other methods.
Ben

Adding a script after the closure of previous script is the way to go i.e. right after the </script> tag.
So it should look something like below:
<script>
Google's script
</script>
<script>
Bing's script
</script>
Cannot comment on one interfering with the other since it really depends on what exact code is there in the scripts. Google and Bing help resources will be able to help more with this.
Thanks,
Vikas

How to call shell script from a pl/sql procedure

Hi all,
I am little bit new to plsql programming, i have a small problem as follows
I have to call a shell script from a pl/sql procedure ..
Please suggest me some methods in oracle 10g, which i could make use of to achieve my goal. also please tell me what are the constraints for those methods if any.
I already came across dbms_scheduler, but i have got a problem and its nor executing properly its exiting giving 255 error or saying that permission problem, but i have already given full access to my shell scripts.
Thanks in advance
Best Regards
Satya

Hi,
Read this thread, perhaps is there your response :
Host...
Nicolas.

An error The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered after launching a ps1 script from cmd file.

I'm trying to load sharepoint script from *.cmd file.
I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
My cmd file is:
Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
My sharepoint file 1.ps1 is:
$snapin="Microsoft.SharePoint.PowerShell"
if ($action -eq $null -or $action -eq '')
{<br />
# Action by default is complete uninstallation.
$action='uninstall'
$uninstall = $true
else
$action = $action.ToLower()
switch($action)
{ $_ -eq "uninstall" } { $uninstall = $true; break }
{ $_ -eq "removesolution" } { $removeSolution = $true; break }
{ $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
{ $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
Check the Sharepoint snapin availability.
if (Get-PSSnapin $snapin -ea "silentlycontinue")
Write-Host "PS snapin $snapin is loaded."
elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
Write-Host "PS snapin $snapin is registered."
Add-PSSnapin $snapin
Write-Host "PS snapin $snapin is loaded."
else
Write-Host -f Red "Error: PS snapin $snapin is not found."
Exit -1
$url = "http://pc1/sites/GroupWork/"
$site= new-Object Microsoft.SharePoint.SPSite($url )
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
$site.Dispose()
The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
PS C:\2> .\1.ps1
PS snapin Microsoft.SharePoint.PowerShell is loaded.
GLOBAL#0 Global template
STS#0 Team Site
STS#1 Blank Site
STS#2 Document Workspace
MPS#0 Basic Meeting Workspace
MPS#1 Blank Meeting Workspace
MPS#2 Decision Meeting Workspace
MPS#3 Social Meeting Workspace
MPS#4 Multipage Meeting Workspace
CENTRALADMIN#0 Central Admin Site
WIKI#0 Wiki Site
BLOG#0 Blog
SGS#0 Group Work Site
TENANTADMIN#0 Tenant Admin Site
{248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
{95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
{7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
PS C:\2>
I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
the cmd file but without success.
My PowerShell has version 2.0:
PS C:\2> $psversiontable
Name Value
CLRVersion 2.0.50727.5477
BuildVersion 6.1.7601.17514
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
After launching the script from 1.cmd file i get an errors:
C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
PS snapin Microsoft.SharePoint.PowerShell is registered.
The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
tered.
Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
ration.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
No xml configuration files loaded.
Unable to register core product cmdlets.
Could not read the Types files in the folder CONFIG\PowerShell\types.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
"No Types files Found."
Could not read the Format file in the folder CONFIG\PowerShell\format.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
No Format files Found.
PS snapin Microsoft.SharePoint.PowerShell is loaded.
New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
on at http://Pc1/sites/GroupWork/ could not be found. Verify t
hat you have typed the URL correctly. If the URL should be serving existing con
tent, the system administrator may need to add a new request URL mapping to the
intended application."
At C:\2\1.ps1:48 char:18
+ $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
+ CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
tionException
+ FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
Shell.Commands.NewObjectCommand
Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.

I have an answer for my problem: for solving a problem I've made several steps:
1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
This user has been added as farm administrator in the wizard.
This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
the Management Shell of Sharepoint.
3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
(my main account) in the Config database
4. Run CMD file only from Start->Run menu.
runas /user:Domain1\UserAccount1 "C:\1.cmd".
Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
Thanks all for help.

Executing Unix scripts from a stored procedure

From the sql*plus windows, I am able to execute the host command and '!sh' commands; but I need to ececute Unix scripts from a stored procedure. Hoe can I do this? Where can I get good documentation on this? Any help would be greatly appreciated!
Thanks..

Hi,
U can use external procedure ( newly added feature in 8.0.3 onwards) and call any shared library. From shared library u can execute it.
One sql command is there HOST(' '). U can run a OS command. But u can not use it in PL/SQL.
U can call pls sql from shell !!!!!..
Thanks...
Boby Jose

Move Script from one client to other

Dear All,
How to move a SAP Script from one client to other.
please suggest me in this regard,
Thanks & Regards
Venkat.

Hi Venkat,
SCOT is for SAP connect & not for transporting Requests.. I guess Amandeep meant SCC1 (Clent Copy )
Regards,
Suresh Datti

How to prevent a text in script from displaying if its value is zero

Dear all,
How to prevent a text in script from displaying if its value is zero
for eg   Price = 0.00
if price is 0 it should'nt appear in output.
I tried with    if price ne 0.
                   price = &price&
                    endif.
but it's not working.
Regards
Raj
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 8:59 AM

Hello Nagaraju,
                       What you were doing is partially right.
The correct format to write in the script is as follows :
/: if &PRICE& ne 0.
&PRICE&
/: endif.
This should work. Let me know how it goes.
Nayan

Can you open a file in PS & run a script from LR?

So one of my commercial clients wants their product files in a variety of formats, including PNG with transparency. I'd love to be able to provide them with this from LR, but you can't export as a PNG. So I've written a script which takes the active document in PS, turns off the relevant layers, converts to sRGB, and saves as a PNG. Is there any way for me to invoke this script from LR, as I am opening the document? Ideally, I'd like to include it in the "Edit in" menu, as a menu item which would invoke PS and run the script. That way I could simply select the images, and get them processing while I do something else. Or do I have to open all the files and then run the script on all the open files?

99jon (à Johannes de Vilder) il y a 2 mois
Images are automatically saved back to the LR library but you need to follow a logical sequence for LR to render the export copy. You need to start the round trip from LR as follows and use the save command (Ctrl+S) not save as:
1) Ctrl+E in the Library to export selected image with develop settings (I choose PSD but tiff is also available in the prefs)
2) Edit in Photoshop; then Ctrl+S to replace (overwrite) Lightroom export copy
3) Ctrl+W to close in Photoshop and update Lightroom thumbnail. The saved copy is usually stacked next to the original so don't worry about XMP.
On Mac OSX Cmd+E; Cmd+S; Cmd+W

Scripting from H4 to H3 or Header

Similar Messages

Maybe you are looking for