Scripts will not show up in menu

Hello
I just recently started using Photoshop CS5. In the past versions you would be able to drop a java script in the Adobe/Presets/Scripts folder and the next time you launched photoshop the script would then be listed under File > Scripts. It now seems that in CS5 that is not the case in both the windows version and the mac version. I really need the script to show up in the menu and I do know the script works in CS5 because if I select File > Scripts > Browse it does run without any issues. The next thing I tried is duplicating a default script that DOES show up in the menu and renaming it and when I launch Photoshop that duplicated script does not show up in the menu. What changed because this was a non-issue in the previous CS versions.  Help needed because this is a very important part of my workflow.
Thanks in advance

I use a PC an old one therefore 32 Bit CS5 I do not have that Problem.  In fact I even install my Photoshop Scripts outside of the Adobe's Photoshop Tree.  I'm able to do that by placing a link/shortcut to My Photoshop Script tree into Photoshop's Presets\Scripts. I do this because I use many of my script in actions and when you do that the full script file path is recorded into the action step. So I do not want my scripts path to change with each version of Photoshop My Photoshop scripts stay put. Using HARVEST_EXCEPTION_ZSTRING I have been able to Group them by script type In Photoshop's menu File>Scripts>.... and have my Photoshop Plug-in script show up in Photoshop menu File>Automate>... In fact I think it works better in CS5 for CS3 would only list some number of scripts then stop listing the other scripts  you had to use the browse item to get to the. 
Here are two examples
<javascriptresource>
<about>$$$/JavaScripts/orient/About=JJMack's Orient^r^rCopyright 2009 Mouseprints.^r^rRun twice script utility for action.^rNOTE:Don't play other actions between runs!^rFirst Run records orintation and rotate Protrait to Landscape^rSecond Run removes orintation recorded and rotates Portrats back.</about>
<category>JJMack's Action Run Twice Utility</category>
</javascriptresource>
// BEGIN__HARVEST_EXCEPTION_ZSTRING
<javascriptresource>
<name>$$$/JavaScripts/AspectRatioSelection/Name=Aspect Ratio Selection...</name>
<about>$$$/JavaScripts/AspectRatioSelection/About=Aspect Ratio Selection Plug-in Version 0.0 By JJmack a Hacker use at your own risk Quality forget about it.</about>
<menu>automate</menu>
<category>JJMack's</category>
<enableinfo>true</enableinfo>
<eventid>3caa3434-cb67-11d1-bc43-0060b0a13dc5</eventid>
<terminology><![CDATA[<< /Version 1
                         /Events <<
                          /3caa3434-cb67-11d1-bc43-0060b0a13dc5 [($$$/AdobePlugin/AspectRatioSelection/Name=Aspect Ratio Selection) /imageReference <<
                               /width [($$$/AdobePlugin/AspectRatioSelection/Width=width) /pixelsUnit]
                               /height [($$$/AdobePlugin/AspectRatioSelection/Height=height) /pixelsUnit]
                               /flagCENTER [($$$/AdobePlugin/AspectRatioSelection/Center=center) /boolean]
                               /flagBORDER  [($$$/AdobePlugin/AspectRatioSelection/Border=border) /boolean]
                               /flagRECTANGLE [($$$/AdobePlugin/AspectRatioSelection/Rectangle=rectangle) /boolean]
                               /flagELLIPSE  [($$$/AdobePlugin/AspectRatioSelection/Ellipse=ellipse) /boolean]
                               /flagREPLACE [($$$/AdobePlugin/AspectRatioSelection/Replace=replace) /boolean]
                               /flagADD [($$$/AdobePlugin/AspectRatioSelection/add=add) /boolean]
                               /flagSUBTRACT [($$$/AdobePlugin/AspectRatioSelection/Subtract=subtract) /boolean]
                               /flagINTERSECT [($$$/AdobePlugin/AspectRatioSelection/Intersect=intersect) /boolean]
                               /feather [($$$/AdobePlugin/AspectRatioSelection/Feather=feather) /pixelsUnit]
                               /flagANTIALIAS [($$$/AdobePlugin/AspectRatioSelection/anti-alias=anti-alias) /boolean]
                          >>]
                         >>
                      >> ]]></terminology>
</javascriptresource>
// END__HARVEST_EXCEPTION_ZSTRING

Similar Messages

  • My AppleTV will not show the main menu but it will airplay

    We have been airplaying music from my iphone to the appleTV all week and now we cannot get any video other than in airplay. The devices are all off of airplay. We have restarted the appleTV, unplugged and replugged the HDMI cords. To no avail.

    Try holding menu and left arrow keys onteh remote TOGETHER for 6 secs - does that let you navigate?

  • A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

    A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

    That message is listed in two scripts on the bank's site. One function that can display the message is named PhotoRotator and the other is named PromoRotator. However, I can't seem to trigger the error myself.
    If you have any add-ons that alter the page, such as ad blockers, try creating an exception for these sites and see whether that helps:
    www.northrim.com<br>
    www.northrimbankonline.com
    You also could try this logon page: https://www.northrimbankonline.com/onlineserv/HB/Signon.cgi
    (''Obviously you should be cautious about links offered on public forums to ensure you are not being phished! Check them out carefully before entering your username and password.'')

  • Firefox will not show pinterest

    Firefox has started going horribly wrong but the kybosh is Pinterest. It will not show this site at all, no pictures load, I've tried clearing the cache on firefox and deleting everything from the history but all that's done is make it worse! Now I get a very basic menu in times roman down the left hand side of the page. I use Google Mail, firefox doesn't seem to like that any more either. It spends ages waiting for scripts to finish running or just not responding.
    I'm using Windows 7, I think, and the latest version of Firefox, it's set to update automatically.
    Please help.
    Cheers
    MTM

    You might already have tried this but, if not:
    When you have a problem with a particular site that previously worked normally, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?
    Could you also try Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Any difference?

  • Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them.  When I do in iPhoto an exclamation surrounded by a triangle appears.  Though I can see the picture in the small tiles below it will not expand.

    Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them.  When I do in iPhoto an exclamation surrounded by a triangle appears.  Though I can see the picture in the small tiles below it will not expand.  I also cannot attach any of these pics into an e-mail or into any other file.  I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild.  Any Help?!  Any Suggestions on how to fix this?!  I have spent almost 2 days now going through all of the published help.
    I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.

    The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
    If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database  --  if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
    If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
    You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
    LN

  • My mac will not show images when on the internet?

    My mac will not show images when on the internet?  I think I have inadvertently changed some settings but nor sure which one.

    I am going to assume you are using Safari here. If so then go to the Apple menu bar and hit Safari-> Preferences.  Under the Apperance tab there is a check box that is called "Display images when the page opens".  Check if that is unticked.

  • Bookmarks toolbar Firefox 10.0.2/OSX 10.6.8 - gone. View Toolbars Bookmarks Toolbar - checked. Dragging URL's to bookmarks toolbar area no longer works. Gray area appears/disappears when checked/unchecked but will not show any or accept new bookmarks.

    My bookmarks toolbar in Firefox 10.0.2 Mac OSX 10.6.8 suddenly disappeared. View>Toolbars>Bookmarks Toolbar is checked. Dragging URL's to the bookmarks toolbar area no longer works. The gray area appears and disappears when checking/unchecking under View/Toolbars menu, but will not show any or accept addition of bookmarks.

    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    *Open the Customize window via "View > Toolbars > Customize"
    *Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    *If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
    *http://kb.mozillazine.org/Toolbar_customization
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

    My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

    Hey there Kellee,
    It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Start with these three steps, and there are more in the article if you need them.
    1. Update iTunes
    Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
    2. Check the USB cable
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    3. Verify that Apple Mobile Device Support is installed
    iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
    Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
    Reinstall iTunes for Windows XP
    Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
    If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Officejet 6600 fax not showing up in menu using windows 7 64

    I using windows 7 64 I reinstalled hp software for Officejet 6600 all in one, but my faxing software will not show up in the menu . I have removed all drivers related to Officejet 6600 several times same problem every time . The fax menu was there before all hardware is still the same.

    Hi G2123,
    I understand you are no longer able to fax from your computer as the Officejet 6600 fax is not showing up. I suggest starting with the HP Print and Scan Doctor.
     The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity :
     USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check : Checks for missing or corrupt driver files.
    Device Manager : Checks for problems in Device Manager that would prevent printing.
    Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match : Checks the port settings for the HP product.
    Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings : Checks and adjusts the print quality settings.
    Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests : Checks the scan mechanism, drivers, and registry entries.
    You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
    Source: Try the HP Print and Scan Doctor for Windows
    Click here to download and run the utility > HP Print and Scan Doctor
    Please let me know if this resolves the issue, thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Any TextFrame Created on Server will not show as tagged on desktop

    Hi All,
    related to an eariler post - if I create "any" text frame on InDesign Server, it will not show as tagged when opened in desktop.
    I run the following code on InDesign Server CS3:
    var doc = app.documents.add();
    var frame = doc.pages.item(0).textFrames.add();
    //..set geometry...save document...
    When I then open the document in desktop and tag the frame, it all works functionally but the frame will not display as tagged ("ie View..Structure..Show Tagged Frames").
    If I add a new frame to the same document (via UI) and tag it - it all works fine.
    If I copy the server generated frame - it will still not display as tagged.
    Strange, and very annoying! Has anyone else come across this issue.
    Can anyone else replicate it for me so I know I'm not mad or have some dodgy install?
    Cheers, Scott

    Scott,
    I see the same problem, so no, you aren't crazy. I tried running the same javascript from within InDesign, but that text frame draws correctly. So, it doesn't look like it is a scripting problem, but a problem unique to InDesign Server.
    Susan Doan

  • Add Header Footer page will NOT show 100% horizontally

    Using Acobat X ver 10.1.13 on WIN 8.1 - new install
    when trying to use Add Headers Footers , the page will not show the Right side of the HeadersFooters page (pls see image attached) That is as wide as it will go, even on a large external monitor - so you are unable to enter
    information in the other fields.
    TIA
    Doug

    Post a link to the page please. Did you upload the Scripts
    folder? If not,
    then join the THOUSANDS of others who have made the same
    mistake and gotten
    their comeuppance here on this board.... (hint, hint)
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "techmanheffley" <[email protected]> wrote
    in message
    news:g9rumt$p3i$[email protected]..
    > Trying to add a flash file in page. Will not show up on
    website.
    >
    > It works if I do a F12 within dreamweaver (preview in
    browser). But it
    > does not work when I go to my website (tried IE7 and
    Safari)

  • I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?

    I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?

    Try going to the following
    Tools->Web Developer-> Page Source.
    You can also access this by way of keyboard shortcut Ctrl + U
    The View Page Source option is also available via the right-click menu by just right-clicking inside the page window & it will be the penultimate menu item.

  • Mail will not show new emails on my Mac Air but sends OK. Mail server is working

    Hello
    As I said above, Mail will not show new emails on my Mac Air but sends mails OK. The Mail server is working because my iPad is receiving and displaying incoming messages.
    Your advice is most welcome.
    Thanks!

    ''LeoJoy [[#question-1058991|said]]''
    <blockquote>
    Thunderbird successfully displays all of my e-mail accounts in the list of accounts and displays all of the inboxes correctly however it doesn't display the e-mails at my newest address in the unified inbox. To see them, I have to click on that particular e-mail accounts inbox. In every way, this account appears to be set up the same as the all the other ones. The newest e-mail account is a second account through Zoho. What do you think is the problem?
    Mac OS 10.9
    Thunderbird 31.6
    [email protected]
    </blockquote>
    Thank you. I had to select the search from the menu instead og by right clicking but it worked just the same.

  • .psd document will not open from Recent menu?

    I have a Photoshop project saved on my computer that A) will not show up from within Photoshop and B) when I do attempt to open it using the Apple Recent menu, nothing happens.
    Any ideas? Thanks so much!

    Hi akillian24;
    Since Photoshop is an Adobe product, you will probably find more help if you ask there.
    Allan

  • Internet Toolbar will not show up

    So about 4 hours ago i was on my mac and everything was fine...i come home and try to go on to the internet and the toolbar (address bar history ect) will not show up ive done view>show toolbar and nothing shows up but a big grey area
    any help really appreciated!
    thank you

    Control-click on the area where the toolbar should be. Do you get the Customize Toolbar item in the contextual menu? If so, select that and in the window that should appear, try dragging the default button set to the Safari toolbar and see if that fixes the problem.
    If not, or if you can't get the contextual menu to appear either, I'd suggest you take this issue up in the Safari forum. You'll be more likely to get further help there, since this probably isn't related to your MacBook's hardware as such.
    Good luck.

Maybe you are looking for

  • User names of service entry sheet release strategy

    Dear Expert , Kindly guide from which table could I get the user names values who done the release strategy for service entry sheet for example I have 3-release codes : 1. Creator                         2. Verifier                         3. Approve

  • HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

    Hi guys, been reading your forums, blogposts, etc and am getting more confused.  I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.  Good news,, I

  • Photoshop quit unexpectedly

    Having trouble launching Photoshop. Everything works fine except for Photoshop. Any suggestions? HERE is the crash report: Photoshop Crash Report - Google Docs

  • Configuring the Receiver File/FTP Adapter !!

    Hi I am trying to configure the Receiver file adapter using the J2SE adapter engine(Please note , NOT the J2EE adapter engine).I see a prerequisite for configuring as below "The address (HTTP port and URL) where the adapter can be contacted from the

  • How does it work if you keep nano

    Hi, I use a nano with the nike plus running sensor ans want to carry on doing this. If I buy an iphone does anyone know if you can run two ipod devices off one itunes account? Thanks Josh