SCXI-1166 SPDT GP Relay, how to program in NISE and Teststand

Hi,
I have a SPDT GP relay and I wanted to know how the routes should be created. For example, in NISE when you create a route you have two endpoints. Endpoint1= Comx but what should Endpoint2=?. Should it be:
Endpoint2=ncx or
Endpoint2=nox
Lets say the route name is called "MyRoute". If I chose my Endpoint2 to be "nox" then when I go into Teststand and use the "Switching tab" under Properties and say Connect "MyRoute" then the connection should be between "Comx->nox". Now when I say Disconnect "MyRoute" will this cause the connection to be "Comx->ncx"?
Thanks for your help in advance.

Guy,
NISE communicates with switch devices through an IviSwtch-compliant drivers, based on the IviSwtch class specification.
This specification does not prescribe the behavior for form C relays - the only way to ensure that the normally-closed position is connected is to create two routes and call connect on the other one after calling disconnect on the first one. Complicated, but that's the only way to ensure the behavior across switches that may behave in different ways.
Srdan Zirojevic

Similar Messages

How to program trackpad home and end features

Is anyone know how to program trackpad home and end features with 3 fingers (mean when you slided 3 fingers to the top it will put you page back to home page to the top or slide down with 3 fingers moved the page to the end (bottom). Thanks

You'll need a 3rd party app for custom gestures.
Take a look at MagicPrefs to see if it does what you need.
http://magicprefs.com/

Popups how top program the ok and cancel button

How do I program the ok and cancel button in the popups. I want to add functionality to the existing ok and cancel buttons in the popup
Thanks,
Veena

You can ise a dialog inside the popup and use a dialogListener to check how hte dialog has been closed
public void handleDialog(DialogEvent event)
if (event.getOutcome().equals(DialogEvent.Outcome.no))
    setGender(getOldGender());
    // reference to the gender component is from component binding
    // see selectOneRadio above - binding="#{sharedPopup.genderComponent}
    RequestContext.getCurrentInstance().addPartialTarget(getGenderComponent());
}{code}
Timo

I Have an SCXI-110 & SCXI-1126 in multiplexed mode, how can I scan both and get accurate readings?

In Lbaview if I just scan either the SCXI-1100 or the SCXI-1126 the reading are accurate, but scanning both causes inaccurate reading on the SCXI-1126. Is this hardware not meant to be used toghter?

All of the SCXI modules can be used in the same chassis with no problems. There's not enough information here to give you any specific advice, but check you can:
1) Put your DAQ card (the one controlling the chassis) in differential mode.
2) Check your signal connections for proper referencing of you signal sources.
3) Try connecting the channel before the 'inaccurate' signal to ground and include it in the scan list. If it cleans up, then the output impedance of that source is is probably too high; slow down the channel clock rate.

How to program the LPC2368 and LPC2468 using microprocessor SDK?

Hi
where to start? I have not found on the site of corresponding materials.
thanks for the help
Solved!
Go to Solution.

Hi Sergiv,
I would suggest taking a look at the following document: LabVIEW Embedded for ARM Porting Guide - Chapter 1: Introduction. It is a generic document that will explain the process of porting to any microprocessor.
If you have LabVIEW Embedded for ARM module, I would suggest that you take a look at one of the shipping templates. There is a template already build for the LPC2468 that you should use. And if you don't have the module you should download the evaluation version to get the template and save yourself a bunch of time.
I hope this helps.
Justin Parker
National Instruments
Product Support Engineer

Sending an email from my Ipad I get "receipient was rejected by server because it does not allow relaying". What does this mean and how do I correct it?

When sending an email from my Ipad. I get "receipient was rejected by server because it does not allow relaying". What does this mean and how do I correct it?

On the email account's settings (Settings > Mail, Contacts, Calendars and tapping on the account on the right), go into it's outgoing SMTP settings and try putting in your email name and password (they might currently show as 'optional')

HT3228 I set up my work e-mail on iphone. When I try to send an e-mail, an error code says "Cannot Send Mail", "recipient rejected by server because it does not allow relaying". What does this mean and how do I correct it?

I set up my work e-mail account on my iphone 4S. When I try to send an e-mail message from my phone, an error message occurs "Cannot Send Mail" - "recipient was rejected by the server because it does not allow relaying". What does this mean and how do I correct it?

Get the correct mail server settings from your IT department.

How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?

How to program a midi foot controller on Mainstage? Does anyone knows how to program the foot controller with exclusive solo channel in order not to dance "tip tap" while from clean guitar I go to crunch or solo? How to do this programming on Mainstage?
I basically managed to learn how to invert parameters which allows me to be as default in the clean guitar channel and if I switch the first button on the midi foot controller I switch to crunch, but at this point I tryied so hard to programm the second and third button to switch, only through a button in one step, to a third channel for distorsion or a 4th channel for solo guitar but I couldn't figured out how this work can be done!
I would appreciate if anyone could help or share this experience with others who are experiencing the same problem.
Cheers.
F.

I cannot seem to get mainstage to recognize my FCB either. I am using IFCB. Anyone figure this out?
Thanks,
Eric

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

How to create a variant and execute a Z-program in background

Hello,
I have created a specific transaction to update relationships between partners (BP).
For this i have create a screen painter, but as the run time is long i want to execute the program in background.
How to save a variant and to execute the report in background ?
Thanks in advance
Christophe

Hi,
Please go to your z-transaction.
Enter your selection criteria. & click on save button to save your your selection criteria as a variant.
Now go to tcode SM36 to shedule your program with saved variant.
Regards,
Narendra

How to program mails to be sent in future date

hi
i would like to knwo how to program my mails to be sent in a future date.
in the mail application and Outlook for Mac.
(outlook for windows allows me to program de date a mail may be sent)
best regards

You can use the Automator app to set an alarm on your calendar which sends the mail at a future time.
It's simpler than it might sound. This explains how:
http://joannalaforet.wordpress.com/2010/02/08/schedule-mail-on-mac-the-easier-wa y-automator-ical-alarm/

I want to send 10 bit ADC from PIC via serial communicaton. i send it separetly 8 bit first then the other 2 bit. how to program in labview to capture those two packet then combine it togother

i want to send 10 bit ADC from PIC mCu via serial communicaton.
i send it separetly 8 bit first then the other 2 bit (2 bit --> with zero at 6 bit from LSB).
how to program in labview to capture those two packet and then combine it together
so i have 10 bit in lab view
thank you

Close, but now quite. You need to specify to the VISA Read how many bytes to read, not how many bits. Thus, the input would be 2, not 16. It's also not clear why you're trying to use the "String to Byte Array". The Type Cast will give you a number based on what data type you wired. You're basically telling it how to interpret the string. In this case we're telling it to interpret the string a 16-bit value, so we'll get a 16-bit integer. I know you said you wanted a 10-bit, but you can't have that. You'll get a 16-bit with 6 bits set to zero. Note: I did not completely understand what you said so we may need to change this slightly, but we want to get the communication and reading collection working first.
Also, since you seem to be setting this in a loop you probably want to monitor this or to collect the data. For that you need a shift register. See attached for a modified version of your attempt. You need to set the datatype to I16 or U16 based on whether the value you get from the PIC is signed or unsigned.
Message Edited by smercurio_fc on 05-01-2007 02:28 PM
Attachments:
Read PIC.vi ‏21 KB
Read PIC.png ‏7 KB

I don't know how to program my DVR to edit out the commercials

Does anyone know how to program the DVR not to record the commercials? Its not a problem on public television, of course.

Actually often very easy to do, but we will not see it again. The Industry has fought against it and made all the manufacturers remove such features.

I have the program Adobe Photoshop Album Starter Edition 3.2 on my PC and some photos from a camera have transferred to it. It says the program has expired and cannot be renewed, how can I get my photos back?

I have the program Adobe Photoshop Album Starter Edition 3.2 on my PC and some photos from a camera have transferred to it. It says the program has expired and cannot be renewed, I am unable to click on the photos. How do I get them back?

Photoshop Album Starter Edition support withdrawal FAQ
This will tell you where your photos are.

Modify the TicTacToeServer /client from deitel How to program

We've been given example code from the deitel & deitel book how to program and have to carry out the following alterations:
a) Modify the TicTacToeServer class to test for a win, loss or draw on each move in the game. Send a message to each client applet that indicates the result of the game when the game is over.
b) Modify the TicTacToeClient class to display a button that when clicked allows the client to play another game. The button should be enabled only when a game completes. Note that both class TicTacToeClient and class TicTacToeServer must be modified to reset the board and all state information. Also, the other TicTacToeClient should be notified that a new game is about to begin so its board and state can be reset.
c) Modify the TicTacToeClient class to provide a button that allows a client to terminate the program at any time. When the user clicks the button, the server and the other client should be notified. The server should then wait for a connection from another client so a new game can begin.
d) Modify the TicTacToeClient class and the TicTacToeServer class so the winner of a game can choose game piece X or O for the next game. Remember: X always goes first.
So far I have only been able to do part a) of the exercise im having a lot of difficulty with part b) which allows the client to play a new game.The code ive done so far is listed below if anyone can help i would be forever greatful. Thanks
// Fig. 18.9: TicTacToeClient.java
// Client that let a user play Tic-Tac-Toe with another across a network.
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.io.*;
import javax.swing.*;
public class TicTacToeClient extends JApplet implements Runnable, ActionListener {
private JButton Button;
private JTextField idField;
private JTextArea displayArea;
private JPanel boardPanel, panel2;
private Square board[][], currentSquare;
private Socket connection;
private DataInputStream input;
private DataOutputStream output;
private char myMark;
private boolean myTurn;
private final char X_MARK = 'X', O_MARK = 'O';
boolean done=false;
Container container;
// Set up user-interface and board
public void init()
container = getContentPane();
// set up JTextArea to display messages to user
displayArea = new JTextArea( 4, 30 );
displayArea.setEditable( false );
container.add( new JScrollPane( displayArea ), BorderLayout.SOUTH );
// set up panel for squares in board
boardPanel = new JPanel();
boardPanel.setLayout( new GridLayout( 3, 3, 0, 0 ) );
// create board
board = new Square[ 3 ][ 3 ];
// When creating a Square, the location argument to the constructor
// is a value from 0 to 8 indicating the position of the Square on
// the board. Values 0, 1, and 2 are the first row, values 3, 4,
// and 5 are the second row. Values 6, 7, and 8 are the third row.
for ( int row = 0; row < board.length; row++ ) {
for ( int column = 0; column < board[ row ].length; column++ ) {
// create Square
board[ row ][ column ] = new Square( ' ', row * 3 + column );
boardPanel.add( board[ row ][ column ] );
// textfield to display player's mark
idField = new JTextField();
idField.setEditable( false );
container.add( idField, BorderLayout.NORTH );
Button = new JButton("New Game");
container.add(Button, BorderLayout.BEFORE_FIRST_LINE);
// set up panel to contain boardPanel (for layout purposes)
panel2 = new JPanel();
panel2.add( boardPanel, BorderLayout.CENTER );
container.add( panel2, BorderLayout.CENTER );
} // end method init
// Make connection to server and get associated streams.
// Start separate thread to allow this applet to
// continually update its output in textarea display.
public void start()
// connect to server, get streams and start outputThread
try {
// make connection
connection = new Socket( getCodeBase().getHost(), 12345 );
// get streams
input = new DataInputStream( connection.getInputStream() );
output = new DataOutputStream( connection.getOutputStream() );
// catch problems setting up connection and streams
catch ( IOException ioException ) {
ioException.printStackTrace();
// create and start output thread
Thread outputThread = new Thread( this );
outputThread.start();
} // end method start
// control thread that allows continuous update of displayArea
public void run()
// get player's mark (X or O)
try {
myMark = input.readChar();
// display player ID in event-dispatch thread
SwingUtilities.invokeLater(
new Runnable() {
public void run()
idField.setText( "You are player \"" + myMark + "\"" );
myTurn = ( myMark == X_MARK ? true : false );
// receive messages sent to client and output them
while ( !done) {
processMessage( input.readUTF() );
} // end try
// process problems communicating with server
catch ( IOException ioException ) {
ioException.printStackTrace();
} // end method run
// process messages received by client
private void processMessage( String message )
// valid move occurred
if ( message.equals( "Valid move." ) ) {
displayMessage( "Valid move, please wait.\n" );
setMark( currentSquare, myMark );
// invalid move occurred
else if ( message.equals( "Invalid move, try again" ) ) {
displayMessage( message + "\n" );
myTurn = true;
// opponent moved
else if ( message.equals( "Opponent moved" ) ) {
// get move location and update board
try {
int location = input.readInt();
int row = location / 3;
int column = location % 3;
setMark( board[ row ][ column ],
( myMark == X_MARK ? O_MARK : X_MARK ) );
displayMessage( "Opponent moved. Your turn.\n" );
myTurn = true;
} // end try
// process problems communicating with server
catch ( IOException ioException ) {
ioException.printStackTrace();
} // end else if
else if ( message.equals("Game Over") ){
displayMessage("fuck sake" );
// simply display message
else
displayMessage( message + "\n" );
} // end method processMessage
// utility method called from other threads to manipulate
// outputArea in the event-dispatch thread
private void displayMessage( final String messageToDisplay )
// display message from event-dispatch thread of execution
SwingUtilities.invokeLater(
new Runnable() { // inner class to ensure GUI updates properly
public void run() // updates displayArea
displayArea.append( messageToDisplay );
displayArea.setCaretPosition(
displayArea.getText().length() );
} // end inner class
); // end call to SwingUtilities.invokeLater
// utility method to set mark on board in event-dispatch thread
private void setMark( final Square squareToMark, final char mark )
SwingUtilities.invokeLater(
new Runnable() {
public void run()
squareToMark.setMark( mark );
// send message to server indicating clicked square
public void sendClickedSquare( int location )
if ( myTurn ) {
// send location to server
try {
output.writeInt( location );
myTurn = false;
// process problems communicating with server
catch ( IOException ioException ) {
ioException.printStackTrace();
// set current Square
public void setCurrentSquare( Square square )
currentSquare = square;
public void actionPerformed(ActionEvent e) {
// I need code here
// private inner class for the squares on the board
private class Square extends JPanel {
private char mark;
private int location;
public Square( char squareMark, int squareLocation )
mark = squareMark;
location = squareLocation;
addMouseListener(
new MouseAdapter() {
public void mouseReleased( MouseEvent e )
setCurrentSquare( Square.this );
sendClickedSquare( getSquareLocation() );
} // end Square constructor
// return preferred size of Square
public Dimension getPreferredSize()
return new Dimension( 30, 30 );
// return minimum size of Square
public Dimension getMinimumSize()
return getPreferredSize();
// set mark for Square
public void setMark( char newMark )
mark = newMark;
repaint();
// return Square location
public int getSquareLocation()
return location;
// draw Square
public void paintComponent( Graphics g )
super.paintComponent( g );
g.drawRect( 0, 0, 29, 29 );
g.drawString( String.valueOf( mark ), 11, 20 );
} // end inner-class Square
} // end class TicTacToeClient
// Fig. 18.8: TicTacToeServer.java
// This class maintains a game of Tic-Tac-Toe for two client applets.
import java.awt.*;
import java.net.*;
import java.io.*;
import javax.swing.*;
public class TicTacToeServer extends JFrame {
private char[] board;
private JTextArea outputArea;
private Player[] players;
private ServerSocket server;
private int currentPlayer;
private final int PLAYER_X = 0, PLAYER_O = 1;
private final char X_MARK = 'X', O_MARK = 'O';
int moves=0;
// set up tic-tac-toe server and GUI that displays messages
public TicTacToeServer()
super( "Tic-Tac-Toe Server" );
board = new char[ 9 ];
for (int i = 0; i<9; i++){
board[i] = ' ';
players = new Player[ 2 ];
currentPlayer = PLAYER_X;
// set up ServerSocket
try {
server = new ServerSocket( 12345, 2 );
// process problems creating ServerSocket
catch( IOException ioException ) {
ioException.printStackTrace();
System.exit( 1 );
// set up JTextArea to display messages during execution
outputArea = new JTextArea();
getContentPane().add( outputArea, BorderLayout.CENTER );
outputArea.setText( "Server awaiting connections\n" );
setSize( 300, 300 );
setVisible( true );
} // end TicTacToeServer constructor
// wait for two connections so game can be played
public void execute()
// wait for each client to connect
for ( int i = 0; i < players.length; i++ ) {
// wait for connection, create Player, start thread
try {
players[ i ] = new Player( server.accept(), i );
players[ i ].start();
// process problems receiving connection from client
catch( IOException ioException ) {
ioException.printStackTrace();
System.exit( 1 );
// Player X is suspended until Player O connects.
// Resume player X now.
synchronized ( players[ PLAYER_X ] ) {
players[ PLAYER_X ].setSuspended( false );
players[ PLAYER_X ].notify();
} // end method execute
// utility method called from other threads to manipulate
// outputArea in the event-dispatch thread
private void displayMessage( final String messageToDisplay )
// display message from event-dispatch thread of execution
SwingUtilities.invokeLater(
new Runnable() { // inner class to ensure GUI updates properly
public void run() // updates outputArea
outputArea.append( messageToDisplay );
outputArea.setCaretPosition(
outputArea.getText().length() );
} // end inner class
); // end call to SwingUtilities.invokeLater
// Determine if a move is valid. This method is synchronized because
// only one move can be made at a time.
public synchronized boolean validateAndMove( int location, int player )
boolean moveDone = false;
// while not current player, must wait for turn
while ( player != currentPlayer ) {
// wait for turn
try {
wait();
// catch wait interruptions
catch( InterruptedException interruptedException ) {
interruptedException.printStackTrace();
// if location not occupied, make move
if ( !isOccupied( location ) ) {
// set move in board array
board[ location ] = currentPlayer == PLAYER_X ? X_MARK : O_MARK;
// change current player
currentPlayer = ( currentPlayer + 1 ) % 2;
// let new current player know that move occurred
players[ currentPlayer ].otherPlayerMoved( location );
notify(); // tell waiting player to continue
// tell player that made move that the move was valid
return true;
// tell player that made move that the move was not valid
else
return false;
} // end method validateAndMove
// determine whether location is occupied
public boolean isOccupied( int location )
if ( board[ location ] == X_MARK || board [ location ] == O_MARK )
return true;
else
return false;
void gameOverCheck() {
boolean over = false;
// Check rows
for (int start=0; start < 9; start += 3)
over = over || ((board[start] != ' ') &&
(board[start] == board[start+1]) &&
(board[start] == board[start+2]));
// Check columns
for (int start=0; start < 3; start++)
over = over || ((board[start] != ' ') &&
(board[start] == board[start+3]) &&
(board[start] == board[start+6]));
// Check diagonals
over = over || ((board[0] != ' ') &&
(board[0] == board[4]) && (board[0] == board[8]));
over = over || ((board[2] != ' ') &&
(board[2] == board[4]) && (board[2] == board[6]));
if (over || (moves>=9))
for ( int i = 0; i < players.length; i++ )
players.gameOver(over ? (currentPlayer+1)%2 : -1 );
public static void main( String args[] )
TicTacToeServer application = new TicTacToeServer();
application.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
application.execute();
// private inner class Player manages each Player as a thread
private class Player extends Thread {
private Socket connection;
private DataInputStream input;
private DataOutputStream output;
private int playerNumber;
private char mark;
protected boolean suspended = true;
boolean done = false;
// set up Player thread
public Player( Socket socket, int number )
playerNumber = number;
// specify player's mark
mark = ( playerNumber == PLAYER_X ? X_MARK : O_MARK );
connection = socket;
// obtain streams from Socket
try {
input = new DataInputStream( connection.getInputStream() );
output = new DataOutputStream( connection.getOutputStream() );
// process problems getting streams
catch( IOException ioException ) {
ioException.printStackTrace();
System.exit( 1 );
} // end Player constructor
// send message that other player moved
public void otherPlayerMoved( int location )
// send message indicating move
try {
output.writeUTF( "Opponent moved" );
output.writeInt( location );
// process problems sending message
catch ( IOException ioException ) {
ioException.printStackTrace();
void gameOver(int winner) {
try {
output.writeUTF( "Game Over. " +
(( winner == -1 ) ? "No winner." :
( "Winner is " + ( winner == 0 ? 'X' : 'O' ) + "." ) ) );
done=true;
output.writeUTF("Game Over");
} catch( IOException e ) {
e.printStackTrace(); System.exit( 1 );
public void run()
// send client message indicating its mark (X or O),
// process messages from client
try {
displayMessage( "Player " + ( playerNumber ==
PLAYER_X ? X_MARK : O_MARK ) + " connected\n" );
output.writeChar( mark ); // send player's mark
// send message indicating connection
output.writeUTF( "Player " + ( playerNumber == PLAYER_X ?
"X connected\n" : "O connected, please wait\n" ) );
// if player X, wait for another player to arrive
if ( mark == X_MARK ) {
output.writeUTF( "Waiting for another player" );
// wait for player O
try {
synchronized( this ) {
while ( suspended )
wait();
// process interruptions while waiting
catch ( InterruptedException exception ) {
exception.printStackTrace();
// send message that other player connected and
// player X can make a move
output.writeUTF( "Other player connected. Your move." );
while ( ! done ) {
// get move location from client
int location = input.readInt();
// check for valid move
if ( validateAndMove( location, playerNumber ) ) {
displayMessage( "\nlocation: " + location );
output.writeUTF( "Valid move." );
gameOverCheck();
else
output.writeUTF( "Invalid move, try again" );
// close connection to client
} // end try
// process problems communicating with client
catch( IOException ioException ) {
ioException.printStackTrace();
System.exit( 1 );
// end method run
// set whether or not thread is suspended
public void setSuspended( boolean status )
suspended = status;
} // end class Player
} // end class TicTacToeServer

reply #1:
http://forum.java.sun.com/thread.jspa?threadID=5114663
&tstart=0@Op. Don't multi/cross-post

SCXI-1166 SPDT GP Relay, how to program in NISE and Teststand

Similar Messages

Maybe you are looking for