SDM Password issue and errors for Web Dynpro Deployment

Hi,
After checking on SDN with regards to SDM Password and issue, I wonder what is the REAL default password for SDM when deploying web dynpro application.
Some mentioned it's "sdm".
Some mentioned it's "admin"
If refer to documentation (from Sneak Preview SAP Netweaver 2004), it's "abcd1234".
Anyhow, it accepted "admin" for my case, but I got an error when I click on "Deploy New Archive & Run". Hope someone can help me on this error. The error message as below:
Nov 6, 2006 11:04:15 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[011]Deployment aborted
Settings
SDM host : nb00
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/ADMINI1/LOCALS~1/Temp/temp3796Welcome.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ADMINI1/LOCALS~1/Temp/temp3796Welcome.ear
Aborted: development component 'Welcome'/'local'/'LOKAL'/'0.2006.11.06.11.03.21':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Only Administrators have the right to perform this operation.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted
Another issue is, although i am not able to deploy successfully (not even once), but if i click on "Run", it will launch browser, and the web dynpro program is works. Problem is, it's the old version. It deosn't display the latest version.
Can any guru out there explain and provide solution?
Thanks in advance.
Message was edited by: Adam Lee

Hi Adam,
Error message sounds like "Administrators have the right to perform this operation". do you have admin rights? for deploying.
Check this thread once same problem but solved:
Re: Deployment exception
Regards, Suresh KB

Similar Messages

Deploy Error for Web Dynpro

I have got the error message on Deploying the project of web dynpro, they are:
Deployment aborted
2006年7月6日 上午10:21:13 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[002]Deployment aborted
Settings
SDM host : fly-2012
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/Family/LOCALS1/Temp/temp25891TutWD_FlightList_Init.ear
Result
=> deployment aborted : file:/C:/DOCUME1/Family/LOCALS1/Temp/temp25891TutWD_FlightList_Init.ear
Aborted: development component 'TutWD_FlightList_Init'/'local'/'LOKAL'/'0.2006.07.06.10.17.59':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Only Administrators have the right to perform this operation.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted
Additional log information about the deployment
2006年7月6日 上午10:21:13 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[002]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7186 - 630]/>
<!NAME[C:\usr\sap\J2E\JC00\SDM\program\log\sdmcl20060706022108.log]/>
<!PATTERN[sdmcl20060706022108.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[MS950]/>
<!LOGHEADER[END]/>
Jul 6, 2006 10:21:08 AM Info: -
Starting deployment -
Jul 6, 2006 10:21:08 AM Info: Error handling strategy: OnErrorStop
Jul 6, 2006 10:21:08 AM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
Jul 6, 2006 10:21:08 AM Info: Update strategy: UpdateAllVersions
Jul 6, 2006 10:21:08 AM Info: Starting deployment prerequisites:
Jul 6, 2006 10:21:08 AM Info: Loading selected archives...
Jul 6, 2006 10:21:08 AM Info: Loading archive 'C:\usr\sap\J2E\JC00\SDM\program\temp\temp25891TutWD_FlightList_Init.ear'
Jul 6, 2006 10:21:09 AM Info: Selected archives successfully loaded.
Jul 6, 2006 10:21:09 AM Info: Actions per selected component:
Jul 6, 2006 10:21:09 AM Info: Initial deployment: Selected development component 'TutWD_FlightList_Init'/'local'/'LOKAL'/'0.2006.07.06.10.17.59' will be deployed.
Jul 6, 2006 10:21:10 AM Info: Ending deployment prerequisites. All items are correct.
Jul 6, 2006 10:21:10 AM Info: Saved current Engine state.
Jul 6, 2006 10:21:10 AM Info: Starting: Initial deployment: Selected development component 'TutWD_FlightList_Init'/'local'/'LOKAL'/'0.2006.07.06.10.17.59' will be deployed.
Jul 6, 2006 10:21:10 AM Info: SDA to be deployed: C:\usr\sap\J2E\JC00\SDM\root\origin\local\TutWD_FlightList_Init\LOKAL\0.2006.07.06.10.17.59\temp25891TutWD_FlightList_Init.ear
Jul 6, 2006 10:21:10 AM Info: Software type of SDA: J2EE
Jul 6, 2006 10:21:10 AM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 6, 2006 10:21:12 AM Info: Begin of log messages of the target system:
06/07/06 10:21:10 - ***********************************************************
06/07/06 10:21:11 - Start updating EAR file...
06/07/06 10:21:11 - start-up mode is lazy
06/07/06 10:21:11 - EAR file updated successfully for 811ms.
06/07/06 10:21:11 - Start deploying ...
06/07/06 10:21:12 - EAR file uploaded to server for 120ms.
06/07/06 10:21:12 - ERROR: Not deployed. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Only Administrators have the right to perform this operation.
                          at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:526)
                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                          at java.security.AccessController.doPrivileged(Native Method)
                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
                     For detailed information see the log file of the Deploy Service.
06/07/06 10:21:12 - ***********************************************************
Jul 6, 2006 10:21:12 AM Info: End of log messages of the target system.
Jul 6, 2006 10:21:12 AM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jul 6, 2006 10:21:12 AM Error: Aborted: development component 'TutWD_FlightList_Init'/'local'/'LOKAL'/'0.2006.07.06.10.17.59':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Only Administrators have the right to perform this operation.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Jul 6, 2006 10:21:13 AM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Jul 6, 2006 10:21:13 AM Error: -
At least one of the Deployments failed -

The tools I using to Deploy is
SAP NetWeaver Developer Studio. and I'm follow the tutorial from it, I have enter the sdm password and operate the delopyment, but when it create the ear file, then the error have occur and catch the error about:
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Only Administrators have the right to perform this operation.
I have try to login as j2eadm to operate the deployment, but the error message is same.
as you say, the user "SDM" or "J2EE_ADMIN" user account I haven't find in my windows XP.
and one more question, does the project need to deploy success then the web page "Web Dynpro Content Administrator" could find the project?
lastly, I have try to login to SDM by using the SAP given program C:\usr\sap\J2E\JC00\SDM\program\RemoteGui for testing, It was success. and does the default SDM account could change the permission by different password?

Deployment error for Web Dynpro application

Hello, I have developed a new Web Dynpro Welcome application in my local system, which is my laptop. I have both the NW Dev Studio and the app server on my laptop.
When I try to deploy and run the application I get the below error. As far I am concerned I have logged in as j2eadm user and trying to deploy.
Appreciate your help to resolve the error
Sep 23, 2007 6:26:57 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[002]Deployment aborted
Settings
SDM host : Natasha
SDM port : 50018
URL to deploy : file:/C:/WINDOWS/TEMP/temp6475Welcome.ear
Result
=> deployment aborted : file:/C:/WINDOWS/TEMP/temp6475Welcome.ear
Aborted: development component 'Welcome'/'local'/'LOKAL'/'0.2007.09.23.18.26.49':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Only Administrators have the right to perform this operation.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted

As per the procedure given in 3rd point I have changed the j2eadm password but it gives me the below error when I try to redeploy and run
Result
=> deployment aborted : file:/C:/WINDOWS/TEMP/temp26493Welcome.ear
Aborted: development component 'Welcome'/'local'/'LOKAL'/'0.2007.09.25.22.11.45':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [Natasha] with user name: [admin] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Authentication did not succeed.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted

Question on NWDI and DC for web dynpro for ESS components

Hi
I am working on installing NWDI and mostly we will be working with ESS & MSS webdynpro customization for NW2004s.
I have a doubt, now for customizing the web dynpro components of ESS is it just enough to create the SC and track and once doing this will the developers get to the DC's of ESS?
Or initially do I have to download the editable part of the web dynpro components and deploy it in the server?
I am not sure how the web dynpro components are made available for the developers. Please help me understand.
Thanks in advance
regards
-sm

Hi
Hope this link might help:
https://websmp206.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=872892
But please specify the EP version .
Thanks & regards
Arun Singh

When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be perfomed on a file with a user-mapped selection open'.

When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
Can anyone help solve this please?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

Strange quality issues when saving for web and devices.

Im a UI designer and spend lots of time working with illustrator and photohop. When I design I normally create vector mockps of my work and then export slices using artboards and save for web and devices. Yesterday Illustrator started having problems exporting files. The files look good on my computer, when viewed with pixel preview mode but when i export they look really bad. here is an example:
This is a screen shot of a part of a mobile app im working on at 100 % and 200 %
here is the same area when exported using "save for web and devices" at 100% and 200%:
as you can see there is a dramatic loss in quality. the icons look almost like a low color gif...
Here is what I have tried already:
I have tried changing the settings in the exporter. I normally use png 24 but I have tried all the different settings and they all do about the same thing. the only one that seems to look ok are swf and svg.
I have copied my files over to photoshop and exported from there. that works fine but it is a pain.
any help would be great.
Eli
www.elilang.com

Here is a screen shot with transparence off and art optimized... still not working.

How to configure SSO for web dynpro ABAP (not web dynpro Java)

Hi Experts,
    I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
     procedure"
   Then deleted all logon procedure other than "SSO Authentication" and saved.
3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
     signal).
4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
After all this settings I opened a browser enter above URL and hit enter but there is an error
There is no login page. It directly showed this error page. No cookies is saving.
Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
How to set the for single sign-on?
Thanks in Advance
Regards
Piyush

Hi Piyush,
Pls refer below links,
Single Sign On with ABAP WebDynpro
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
Regards
K.N

Transport issue when copying a web dynpro component

Hello All.
I have a web dynpro component lets say ZTest and now I want to copy this, I gave the new one a different name i.e. ZFINAL, now when I copied, it asked me for the trasnport and when I asked to create a new transport I got this message "Class ZIWCI_ZFINAL does not exist" and then I clicked the green arrow again and it created a transport for me. After this process I activated my web dynpro component successfully, my web dynpro component has 3 views and 3 windows. When I looked at my new transport (for ZFinal), I only saw three tasks attached to teh transport i.e. 1. Interface 2. Info Object from the MIME Repository and 3. Web Dynpro Component but I didn't see Controller (Web Dynpro), Definition (Web Dynpro) and View (Web Dynpro) attached to my transport. Now I wonder when I release my transport to Q I may have issues.
Note: My old trasnport (which has Ztest)has all the missing objects: (Web Dynpro), Definition (Web Dynpro) and View (Web Dynpro)

I resolved it myself.. I had to write the transport entry manually for the views and windows and even the component controller definition.

DC Build Error with Web Dynpro Project

Hi,
I have created a DC Project and migrated all the local Web Dynpro project to the DC project which is connected to NWDI.
When I performed a Development Component Build, I am getting tons of errors like this :
C:\Documents and Settings\mlee20\.dtc\1\t\E9C452A69844E0F9849D478F81878AB9\gwd\packages\com\bhpb\totalcomp\TestConnect.java:26: package com.sap.ip.bi.sdk.dac.result.model does not exist
import com.sap.ip.bi.sdk.dac.result.model.BITableItem;
                                          ^
C:\Documents and Settings\mlee20\.dtc\1\t\E9C452A69844E0F9849D478F81878AB9\gwd\packages\com\bhpb\totalcomp\TestConnect.java:27: package com.sapportals.connector.connection does not exist
import com.sapportals.connector.connection.IConnectionFactory;
                                           ^
C:\Documents and Settings\mlee20\.dtc\1\t\E9C452A69844E0F9849D478F81878AB9\gwd\packages\com\bhpb\totalcomp\TestConnect.java:28: package com.sapportals.connector.connection does not exist
import com.sapportals.connector.connection.IConnectionSpec;
                                           ^
C:\Documents and Settings\mlee20\.dtc\1\t\E9C452A69844E0F9849D478F81878AB9\gwd\packages\com\bhpb\totalcomp\WealthView.java:25: package com.sap.security.api does not exist
import com.sap.security.api.;*
^
C:\Documents and Settings\mlee20\.dtc\1\t\E9C452A69844E0F9849D478F81878AB9\gwd\packages\com\bhpb\totalcomp\WealthView.java:29: package com.bhpb.bi does not exist
import com.bhpb.bi.BITable;
                   ^
I have included a jar file BIWrapper.jar in the lib folder....
Does it mean that some of the dependencies jar files is needed in the NWDI?
For anyone help please.
Thanks.

Hi,
Create an Dc of type external library which contains the BI Wrapper
and refer this dc from your WD.
This blog will help you in creating external /people/valery.silaev/blog/2005/09/14/a-bit-of-impractical-scripting-for-web-dynpro
Regards
Ayyapparaj

Short dump when trying to open FPM for Web Dynpro Application

Hi,
I am receiving a short dump while trying to open a Web Dynpro Application in FPM. I go to SE80 and open the Web Dynpro component 'FPM_OIF_COMPONENT'. I then choose the application '/sapsrm/wda_l_fpm_oif'. I then click Web Dynpro Application -> Test -> Execute in Administration Mode. A new IE browser is opened and I then receive a short dump. The name of the short dump runtime error is 'OBJECTS_OBJREF_NOT_ASSIGNED_NO' and the exception is 'CX_SY_REF_IS_INITIAL'.
I have not used FPM before. I would like to use it to remove the 'Close' button from this application. Do I need to initialize FPM before using it?
Please help.
Thanks,
Jeff

>
Chinnu wrote:
> Hello Jeffery Andersen,
>
> If I understand correctly, you are trying to preview FPM_OIF_COMPONENT.
>
> I think this component can not be executed as it just is a template for creating a FPM applications. In other words, it is an interface that can be used to created a WD ABAP application from work bench.
>
> This [Floor Plan Manager - ABAP|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90f3cfd2-46d0-2b10-b3ab-eabf3452cc50&overridelayout=true] can help you understand better.
>
> Best regards,
> Chinnu
Hi Chinnu,
Your understanding is not correct, he is trying to execute the application /sapsrm/wda_l_fpm_oif'.
Hallo Jeff,
everyone have suggested lots of possibilities. Nothing works for you. I would suggest the following.
Go and execute any other FPM application which uses FPM_OIF_COMPONENT,does it work ?
If it works then you can narrow down that /sapsrm/wda_l_fpm_oif is not working and you can raise a OSS ticket.
If it is not working then you have to see if you have right BASIS versions to use FPM.
Edited by: Baskaran Senthivel on Dec 6, 2010 1:09 PM

How to call custom themes for Web Dynpro ABAP Application?

Hi,
I need to change the appearance of Web Dynpro ABAP application. So far I followed below steps,
1.     Created theme folder u2018testngou2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> u2018testngou2019 ).
2.     used program BSP_UPDATE_MIMEREPOS to dowmloaod content of u2018sap_tradeshowu2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> sap_tradeshowu2019) to desktop.
3.     Modified the themes using Eclipse Theme Editor.
4.     used program BSP_UPDATE_MIMEREPOS to upload modified themes to MIME repository u2018testngou2019 (SE80->MIME Repositoty -> SAP->PUBLIC->BC->UR->nw5->themes -> u2018testngou2019) .
My current URL is like http://server.name:XXXX/sap/bc/webdynpro/sap/hrrcf_a_startpage_int_cand?sap-client=XXX.
Now I want to know how custom themes called for Web Dynpro ABAP Application.
Is my approach correct?
...Naddy

Hi Naddy,
What you used is one way and even I failed when tried that method,
Instead go to SE38 - WD_THEMES - and you need to upload the zip file and you need to follow a folder structure.
it is case sensitive, atleast the zip file.
Make a zip file by name "Project.zip" -
Create a Folder Project and have the below folder structure,
1 data - all the properties files and also the designinfo file, below is the code
2 themes - (to get all the files download the theme from portal and you will have all the folders)
   2.1 ur
     2.1.1 name of the theme
       2.1.1.1 common
       2.1.1.2 csf
       2.1.1.3 r
       2.1.1.4 ur - all the css files (would be good if you can get the files from the server.)
       2.1.1.5   WSRP
3 war - empty folder
*.designinfo
isVisible=true
version=7.0.14.1.0
isDefault=false
isSapDesign=false
designName=**** name of the theme
Once done create a zip file and click on Start Import and give the path and will ask for transport request, it will take a while to upload once done as mentioned in the use the parameter sap-ep-themeroot="path"
This will resolve the issue.
Cheers-
Pramod
reward points if helpful

Coding standards for Web dynpro ABAP

Hello all,
Can anybody please help me by providing the code review checklist for Web dynpro ABAP?
Thanks and Regards,
Rohini Shankar

Hello friend,
WebDynpro     *
1     Do not implement Data intensive operations in UI layer
2     Avoid database selects in the WebDynpro code.Use the corresponding BAPIs ,Methods
3     Are ABAP OO Classes like Assistance class are being used for application coding ?
4     Are Windows/Views only used for the sole purpose of hosting views and context?
5     Are a reasonable number of views put in a single WD Component instead of creating multiple WD Components ?
6     Unneccessary usage of dynamic programming and dynamic component avoided
7     Are singleton nodes used in case of nesting in the context ?
8     Is deep nesting of containers, Groups and Tabstrips avoided ?
9     Is the UI element TreeByKey or TreeByTableNestingColumn used instead of the Tree UI element ?
10     Is the checkbox "Accessibility Checks Active" ticked in the WD Component properties
11     Are the WD Component Instances deleted when no longer needed (IF_WD_COMPONENT_USAGE=>DELETE_COMPONENT)
12     Are the OTR texts defined for all the labels, texts(where ever appropriate) in properties of all the UI elements
13     Has the Generation limit been checked for all the components developed
14     Sufficients commets are written at the beginning of every major block to explain the processing logic.
*Error Handling     *
1     Is SY-SUBRC checked after CALL function modules
2     Use Assertions if you face unexpected errors which usually never ever occur!
Extended Check and Clean Up
1     Have following been removed :
     ·      Unused variables
     ·      Unused text elements
     ·      Unused tables from TABLES statement
     ·      Commented out parts of the code
     ·      Code segments which do nothing
2     Is extended program check completed and all errors/warnings removed
These are the things which i used for my project.
Thanks,
Sri Hari

JCO Connection for web-dynpro tutorials (EP 6.0 SP9 downlaod from SDN)

Hello,
I have a question regarding JCO connections for web-dynpro example/tutorials. I have installed WAS 6.40 sneak preview from EP 6.0 SP9 download from SDN. Installation instruction says: Choose "No SLD available"
but the web-dynpro example/tutorial asks to create JCO connections by going to web-dynpro -> content admin..etc on http:<host>:50000..Here, all the tabs relating to creating JCO connections appear to be "protected" on my screen. so I can't do anything further. By going to http:<host>:50000/sld, I also tried to add SLD server..but that is not helping. There is some "import" button, but which CIM file (in which folder etc) am i supposed to import for a simple test system? What are the steps for a bare minimum setup so that I can use the WAS 6.20 system at work-place as my backend & try out the web-dynpro examples? Do I really need SLD setup? Where is documentation about all this after one installs the WAS 6.40 JAva? I was expecting it somewhere at least in the eclipse IDE help-documentation..None of the web-dynpro tutorials explain this !
thanks

Thanks everybody.
NagaKishore, after doing all the steps, when I goto
localhost:50000-> web dynpro -> content administartor, and try to "maintain JCO Destinations" I am getting this error: (full stack trace not included)
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Error stacktrace:
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:871)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:485)
     at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.updateJCOClientStatus(JCOConnectionsDetails.java:438)
     at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.addJCOClientToList(JCOConnectionsDetails.java:634)
     at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.addJCOClientToList(JCOConnectionsDetails.java:598)
     at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.wdDoInit(JCOConnectionsDetails.java:120)
     at com.sap.tc.webdynpro.tools.explorer.wdp.InternalJCOConnectionsDetails.wdDoInit(InternalJCOConnectionsDetails.java:238)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)

BASIS settings for Web Dynpro ABAP

Hi Team,
I need to know of settings required (configuration) for Web Dynpro ABAP. Please help me on this. Please also let me know of how these settings can be implemented.
Regards,
Amit

Hi Amit
First you have to check the domain, if it is not maintained then maintain the domain in your operating system.
To do this, follow below path :
-- Right click on My Computer >> Computer Name tab >> Click Change >> Click More >> Enter your domain name in the format u201Ccompanyname.comu201D in the section Primary DNS Suffix of this computer
u2013 Click OK
And then go to your SAP to set "icm/host_name_full" in transaction RZ10.
Choose your Instance profile, click on Extended Maintenance and then click on the Change button
As "icm/host_name_full" is not present for you, add it by using the New parameter button
set the value to <hostname>.companyname.com (hostname can be seen through transaction RZ11).
Save and activate your profile and after that restart the R/3 server to take effect.
Hope this will solve your issue.
Regards
Brillion

Create iView for Web Dynpro Application

Hi guys,
I've created a Web Dynpro Application via NWDI and deployed to the j2ee server. Now, I'm trying to create an iView to link to that application. The steps I've done are:
1. Create iView for Web Dynpro Application
2. Select "Create iView from each application View"
3. Select my application.
That's when the error occurs at step 3. I select my application and click next, but an error msg keeps appearing telling me to "To continue, select at least one application" despite having already done so. Can anyone enlighten me on this? Thanks!
ZHenmin

Hi,
First make sure the applications runs fine standalone. Also the versions for WAS and EP are maintained correctly. Actually, this error seems to be occur for many users. Check this thread too.
Open new Web Dynpro iView in EP7
If nothing works, restart the server and try creating the iView again.
Regards,
Harini S

SDM Password issue and errors for Web Dynpro Deployment

Similar Messages

Maybe you are looking for