Search Help Creation Using HR Master Table
Hi,
I have got one functional spec for elementary search help creation in SAP HR,
that elementary search help contain a view. In that view i want TWO fields with
two different selection condition say,
Field Name is <b>USERID from the table PA0105 with Sub type 01 as Core id and Sub Type 10 as Location</b>, I want these two fields to be there in my View but the field name are same.
There is any option for this in the VIEW creation.
Reg,
Hariharan
Hi Kiran,
Master table is PA0003, where all pernrs will be
stored here.But to get employee name you can use
PA0001-ENAME (Formatted name of employee)
PA0001-SNAME (Employee's name)
For last name and first name you can check
PA0002-VORNA and PA0002-NACHN.
Hope this will you.
Thanks & Regards,
Srilatha.
Similar Messages
-
Creating a new Search Help on a standard SAP table field?
Good day, everyone!
As part of a report I am writing, the customer would like to have Search Help added to the AUFEX field in table AUFK. They would like this functionality so that when they are changing an order via t-code ko02, they can get a list of valid values to put in field AUFEX. I would like to tie it to a zTable I've created; in my zTable, I have just 2 fields: a key value (that will go into AUFEX) and a text description of the key value. This zTable is used in my report.
While I've created a Search Help on this table already for table maintenance, I've never added a custom Search Help to an existing standard SAP table field before. I've done some Googling and other searching to see what I need to know, but I've only been able to find information on Collective Search Helps. AUFEX doesn't yet have a Search Help field, so I don't think Collective Search Helps is my answer.
Is this possible? Can I add a custom Search Help to a standard SAP table field that doesn't have any Search Help linked to it yet? Is there an existing thread or guide somewhere that can tell me how to do this?
Thank you!Hi
Yes u can: u can assign the search help to (A) data element livel or (B) field table livel.
After creating your search help:
A) Run SE11, insert your data element (AUFEX), press edit and insert the search help in "Search Help" area on DEFINATION tab;
B) Run SE11, insert your table (AUFK), press edit, place the cursor on your field (AUFEX) and go to GoTo->Search help->for field
But u should consider it'll mean to change a standard object for both cases: so u need to get the access key from your OSS.
Max -
Search help in case of a table cell editor
Hi
I need a search help in case of a table cell editor as well as the the other requirement is that it shld be a reusable one.
could anyone of u suggest me some methods
regards
Nikhil TapkirThere are several ways of doing this.
1. Use OVS
2. Create a Search help in R3. Call the function module.
3. Create a Jar file which would provide the result .
It is upto you on which ever way you want to provide
Kumar -
Attaching search help to SCREEN FIELDS AND TABLE FIELDS
Hello experts,
Himanshu here.
Could you please explain how we can assign search Help to a screen field AND TABLE FIELDS in ABAP?
Please reply at the earliest,as we have some deliverables to be met
ThanksHi,
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Collective search help and choose .
The maintenance screen for collective search helps is displayed.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the parameters of the collective search help.
Select the Imp flag if it is an import parameter. Select the Exp flag if it is an export parameter.
Define the types for the parameters of a collective search help by assigning a data element. Enter the name of the data element that describes the contents of the search help parameter in the Data element field.
You can assign the parameter a default value in the Default value field.
In exceptions it could be necessary to change the standard process defined by the search help. You can implement the deviation from the standard using a search help exit.
In this case enter the name of the search help exit in the corresponding field.
On the Included search helps tab page, define the search helps that you want to include in the collective search help.
You can include elementary search helps and collective search helps.
Use the Hide flag to control whether an included search help should appear in the dialog box for selecting the elementary search help. If the flag is set, the search help is not offered.
It makes sense to hide search help inclusions if one or more search paths in the standard system should not be used in a concrete R/3 System. Similarly, search help inclusions can also be already hidden in the standard system because they only can be used meaningfully in a few R/3 Systems. You have to cancel the flag in this case.
Position the cursor one after the other on each allocated search help and choose Parameter assignment.
In the next screen, enter the parameter names of the elementary search helps to which the corresponding parameters of the collective search help should be assigned in the field Reference parameter.
You can select the parameters contained in the included search help using the input help. Create a proposal for the assignment with Proposal.
Save your entries.
A dialog box appears in which you have to assign a development class to the search help.
Choose .
Result
The collective search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred when the collective search help was activated, the activation log is automatically displayed.
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
regards,
veeresh. -
Create search helps for fields of custom tables
Hi,
Could any one please provide me the step by step process to create search helps for fields in custom tables?
Thanks in advance,
Nobin.Hello Nobin
There is basically no difference between a search help for standard vs. customer tables.
An important choise is the selection method for your search help:
Either you use your custom table, a view or a search help user-exit if you need to implement very specific requirements.
Assuming that you can use your DB table as selection method the further implementation of the search help is quite straightforward:
(1) Define the parameters you would like to have a selection criteria (SPos = SPos) and which should appear on the result list (= LPos).
(2) Define the parameters that can be used as input for the selection (flag IMP) and are returned by the search help (flag EXP)
Regards
Uwe -
Search help for a field in table control based on another field value
Hi,
I want to attach the Search help for a field in table control based on another field value.
Please help me asap.
Will be highly rewardedHI,..
Check these links
search help in table control
Re: How to create Search Help for a field in Table control !!
How to create Search Help for a field in Table control !!
F4 Help In Table Control
Control table F4 help
Problem in F4 help in screen field
check this code
DATA: BEGIN OF it_value4 OCCURS 0,
TEXTCODE LIKE ZXX-TEXTCODE,
TEXTDESC LIKE ZXX-TEXTDESC,
END OF it_value4.
progname = sy-repid.
dynnum = sy-dynnr.
SELECT TEXTCODE TEXTDESC
FROM xxxx
INTO CORRESPONDING FIELDS OF TABLE<b> it_value4</b>
WHERE LOSS_CODE =<b> IT_VALUE1 .</b>
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'TEXTCODE'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'ITVALUE-TEXTCODE' "-->UR 4 th filed value in screen
value_org = 'S'
TABLES
value_tab = it_value4.
endmodule.
Message was edited by:
veereshbabu ponnada -
How to create Search Help for a field in Table control !!
Hello Friends,
I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
SenthilCheck the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
break gblap0.
ws_dynpfld-stepl = mprn-current_line.
LOOP AT i_mprn.
MOVE i_mprn1-mprn TO i_mprn-mprn.
MOVE ws_postcode TO i_mprn-post_code.
MODIFY i_mprn INDEX
mprn-current_line." transporting MPRN POST_CODE.
ENDLOOP.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
gntc LIKE iflot-zzgntc,
END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ZZGNTC'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select Gas Nomination Type Code'
value_org = 'S'
TABLES
value_tab = lt_gntc
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
ws_dyname1 LIKE d020s-prog,
ws_dynumb1 LIKE d020s-dnum,
ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-MPRN'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-POST_CODE'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash. -
How to attach search help in field BEDNR in table EKPO
Hello, Experts!!!
I have a problem in attaching Search Help in field BEDNR in table EKPO.
Can anyone share something about this.. I've been dwelling on this for some time now,
but still wasn't able to find a solution.
Any thoughts would be highly appreciated.
Thank you!!!
Ellainne22Hi,
I don't think you can directly link any search help with BEDNR without modification. If a search help was already linked, we could have gone for append search help. But in this case, nothing is there. So the options would be,
see whether you can insert any search help through enhancements in the screens..You have to do it in every screen then.
Other option is create a database view, & replace the dataelement with your own with a search help. You can refer this view after that.
or go for modification & change the dataelement.
Regards,
Gokul -
Search help 4 vendor & costumer Master
Hi everyone
I need to create a search help that content vendor master and costumer master in the same search help, it is possible??. If it is possible, how can i do it??
Thanks & Regards
David NHI everyone i make a compose search help that includes this simple search help with
DEBID
KUNNR C LIFNR
BUKRS C BUKRS
KREDK
LIFNR C LIFNR
BUKRS C BUKRS
thanks -
Search Help for field of standard table used on non standar report
Hi all.
I need to know whether is posible to set up a "Search Help" / "Matchcode" for one standard field (LFBK-BKTVP) of a standard table (LFBK) that is going to be used on the selection screen of one new non standard report ZFK01.
I was wondering if this could be posible under any special attributes, set up, ... for this field in the corresponding screen, but do not really know nor if that would work neither what to set up. Any other workaround would also be welcome.
Could somebodly help?
Thanks in advance. Regards,
AbdaliHi ,
Please try this code .It is working as per your requirement.
*& Report ZTESTPRO4 *
REPORT ztestpro4.
TYPES:BEGIN OF ty_lfbk,
bvtyp TYPE lfbk-bvtyp,
END OF ty_lfbk.
DATA:gt_lfbk TYPE STANDARD TABLE OF ty_lfbk,
gs_lfbk TYPE ty_lfbk.
PARAMETERS:bank TYPE lfbk-bvtyp.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR bank.
SELECT bvtyp
FROM lfbk
INTO TABLE gt_lfbk.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BVTYP'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'bank'
value_org = 'S'
TABLES
value_tab = gt_lfbk. -
Issue with Search Help Creation
Hi All,
I need to display the match code for the Z table ZPRODUCT and the field is PRODH. The data should be retrieved from the table T179 by filtering PRODH = 'ZZ*' and STUFE = '1'. So, I am trying to create a Search Help for this requirement. But, the field ZPRODUCT-PRODH is of 5 Characters length and the field T179-PRODH is of 18 characters length. As the lengths are not matching, it is not allowing me to create the Search help. Could someone tell me if there is any way to overcome this issue?
Or is there any better approach to create the match code apart from the Search Help. Can we use the Table events for this requirements? Please share your thoughts.
Thanks a lot in advance.
Regards,
Paddu.Did you check the screen field names & search help name? is it identical & unique?
Raja T -
Search help for Product category in table level
Hi Gurus,
My requirement is to create a Z-table with fields Plant and Product category.
For this Product category I need to create a table level search help. So I need to know the SRM table used for Product category.
Could any suggest me any table name or search help or FM that will display the list Product Category .
Regards
PaulHi Paul,
Use the FM 'BBP_GET_ALL_CATEGORIES_F4' for getting all the list of Product Category .
Thanks
Bidyut -
Search help for fields in custom table..
hi,
in my custom table i have two fields - table name and field name. when user selects table name as VBAP , for field names i need all the fields in VBAP to be displayed and for that I set the check table as DD03L and I am able to see all the fields. But i am not able to see the description of the fields rather seeing field name , other key fields of DD03L.
How do i get to display something like
field name - description - length (length of the field as defined in DDIC)
If search help will help then can u pl tell me how to create one ? or any standard can be used ?
thanksYes, you need to create search help and assign it to the field 'field name'
Please search SDN for how to create search help. There are 100's of threads with this
By the way the texts can be found in table DD03T for tables as well as for fields -
Search help for material number in table control
Hi
I have a table which i have generated using table control wizard.
I have used an interal table while creating the table control through wizard.
In this internal table i have field matnr.Now my requirement is to have a search help for this field.
I want a default search help for material as you get one instandard transactions.
In my other i have ip/op field i.e matnr and i have used the field directly from ztable,it has got the search help but since i am using the internal table i am notting getting a search help .
can anyone tell how to assign a search help to my table control material fieldhi deepthi,
chk a sample one which will help u. <b><i>f4 hlp in table control</i></b>
* Screen flow logic........
PROCESS BEFORE OUTPUT.
*MODULE PBO_MODULE.
PROCESS AFTER INPUT.
*MODULE PAI_MODULE.
PROCESS ON VALUE-REQUEST. "F4
FIELD EKPO-EBELP MODULE help_ekpo.
* populate screen field from within PROCESS ON VALUE-REQUEST(F4) call
*& Module help_responsibility INPUT
* text
MODULE help_ekpo INPUT.
**Transport values to table dynpro/screen table control
DATA: l_stepl LIKE sy-stepl,
l_indx LIKE sy-stepl.
DATA: dynpfields LIKE dynpread OCCURS 5 WITH HEADER LINE.
* Adjust for scroling within table control
CALL FUNCTION 'DYNP_GET_STEPL'
IMPORTING
povstepl = l_stepl
EXCEPTIONS
stepl_not_found = 0
OTHERS = 0.
l_indx = tc_ekpotable-top_line + l_stepl - 1.
"tc_ekpotable should already have been declared
REFRESH dynpfields.
CLEAR dynpfields.
dynpfields-fieldname = 'EKPO-EBELN'.
dynpfields-fieldvalue = '00010' "wa_ekpo-ebeln.
dynpfields-stepl = l_stepl.
APPEND dynpfields.
dynpfields-fieldname = 'EKPO-EBELP'.
dynpfields-fieldvalue = '00020' "wa_ekpo-ebelp.
dynpfields-stepl = l_stepl.
APPEND dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = 'SAPLZZ_EKKO' "Program name
dynumb = '0100' "Screen number
TABLES
dynpfields = dynpfields
EXCEPTIONS
OTHERS = 0.
ENDMODULE. " help_ekpo INPUT
rgds
Anver
<b><i>if hlped kindly mark points</i></b> -
iWORK NUMBERS
I am trying to create a 'Master Table'. This table will be used on numberous sheets, however not all. Items entered into the cells in the Master Table will then reflect in the used sheets that have the Master Table linked.
On the individual pages however, they will be able to be altered purely for that page.
Hope I have explained myself clearly,
Would appreciate any help,
Cheers,Hi Hilary,
The formula in the Index column of the Main table is:
E2: =IF(A,MAX($E$1:E1)+1,"")
Fill down to the end of column E.
The Breakout table contains a single formula:
A2: =IF((ROW()-1)>MAX(Main :: $E),"",OFFSET(Main :: $A$1,MATCH(ROW()-1,Main :: $E,0)-1,COLUMN()))
Fill down and right to fill the table.
For multiple rooms (with different data transfered to each) you'll need a column of checkboxes and a corresponding index column for each room.
The index columns can be hidden.
Contents in individual cells in the breakout tabel(s) can be entered directly, replacing the formula. To retun to the calculated result, select a cell adjacent to the one where text was entered, and drag the Fill control handle (small circle, bottom right of the selection rectangle) to fill the formula back into that cell.
Regards,
Barry
Maybe you are looking for
-
i was trying to restore my phone and it was connected and everything and i went to restore it and after a couple of minutes something popped up saying it couldt restore. i looked to my phone screen and it looked as if the phone was going to restore b
-
HT1695 Trouble connecting to VErizon network home system?
When trying to connect to my home verizon network, it recognizes the name of the network, but doesn't offer me the opportunity to put in a password when I select it. What's up?? DW
-
Arri raw converter ( alexa )
I may be able to get some sxs card alexa footage (just junk we shoot real fast when they call lunch break ) from work onto my graid external via friends at work. they are shooting log c for this job but I guess we can make it arri raw instead. questi
-
How do I stop jpegs automatically opening Photoshop? And instead open in Preview
When I installed Photoshop CS6 I must have selected to open all JPEGS via Photoshop. I need to deselect this option and elect to open JPEGS as before, in Preview. How can I accomplish this? Thanks for your help, this is slowing me down.
-
ICal is not working Can I reload?
Application ICal is not functioning - Can I reload it? I've tried within the application to restore ICal but it doesn't update.