Search help for input field

Hi abapers i have one field crhd-arbpl(work center). its d't have serch help.
i wrote a program for it in that i used 'F4IF_INT_TABLE_VALUE_REQUEST' function module.
but it is displaying output directly.
when i press f4 it should be display first selection screen in popup window
Note:s run transaction CR06 and press f4 in WORK CENTER
I want same result in my program.

Hello Keshava,
The possible error cause ie, report being displayed directly is because you wouldn't have written the start-of-selection event. write the F4... function module on at selection-screen on value request event for the field and write a start-of-selection event for the remaining processing logic.
Regards
Farzan

Similar Messages

Search help for input fields in a screen

Hi,
Pls help me
how to set search help property for the I/O fields in screen in se80?
1. do we want to add any property for search help in the property window?
2.do we want to create a MODULE PROCESS ON VALUE REQUEST ?
PLS tell me how to set search for the I/O field in se80?pls tell me the process?
i want to set the search help for more I/O fields in se80 but all the fields belongs to the same table?
can i create a single search for all these fields and use that for all the I/O fields ?
elementary search help or collective search help?
thanks & regards in advance,
vsnl.

Hi,
Input Help on the Screen
Within the Screen Painter, you can define two types of input help:
1. The FIELD statement with one of the additions VALUES or SELECT.
2. Linking a search help directly to a screen field.
If you link a search help directly to a screen field, it overrides the additions of the FIELD
statement. However, the input check [Page 581] functions of the FIELD statement remain
unaffected.
Input Help in Flow Logic
The following input help methods are obsolete and should not be used. They are still supported
for compatibility reasons.
In the screen flow logic, you can specify a value list for a screen field <f> as follows:
FIELD <f> VALUES (<val1>, <val2>,...).
The value list contains a series of single values <vali>. The NOT and BETWEEN additions for the
input check [Page 581] are not appropriate for input help.
You can also create a value list by accessing a database table as follows:
FIELD <f> SELECT *
FROM <dbtab>
WHERE <k1> = <f1> AND <k2> = <f2> AND...
In the WHERE condition, the fields of the primary key <ki> of the database table <dbtab> are
checked against the screen fields <fi>. The WHENEVER addition, used with input checks [Page
581], is not necessary for input help.
If you have used a ABAP Dictionary reference for field <f>, the selection and the hit list formatting
may be affected by any check table attached to the field.
Attaching a Search Help
Search helps from the ABAP Dictionary can be attached to a screen field [Ext.]. To do this, enter
the name of the search help in the corresponding field in the attributes of the screen field in the
Screen Painter. This assigns the first parameter of the search help to the screen field. It is only
possible to place a value from the hit list onto the screen.
Input help on a screen.
REPORT DEMO_DYNPRO_F4_HELP_DYNPRO MESSAGE-ID AT.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
602 April 2001
Cancel
Airline
Flight number
Screen field with search help
Input help in the flow logic
The input fields have been adopted from the program fields CARRIER and
CONNECTION. The function code of the pushbutton is CANCEL, with function type
E. The search help DEMO_F4_DE with the search help parameter CARRID is
assigned to the screen field CARRIER. The search help uses the database table
SCARR.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
FIELD CARRIER VALUES ('AA', 'LH').
FIELD CONNECTION SELECT *
FROM SPFLI
WHERE CARRID = CARRIER
AND CONNID = CONNECTION.
When the user chooses the input help for the individual fields, the following input
help is displayed:
For the Airline field, the search help displays the names of the airlines and places the airline
code in the input field for the chosen line. If the airline code is not one of those listed in the
VALUES list of the screen flow logic, the input check triggers an error message in the PAI
event. So the search help overrides the VALUES addition for the input help, but not for the
input checks. This is therefore not an appropriate place to use the VALUE addition.
For the Flight number field, the flow logic displays the selected entries from the database
table SPFLI and places the selected line in the input field.
Regards,
Bhaskar

How to implement SEARCH HELP for input field in WDA

Hi All,
I am doing a tool for my team. in this tool there are 4 input fields to show different processes. I implemented the 4 input fields and also bind the respective tables to these fields successfully. Actually I want to filter the data between 2 fields . Means the data in the 2nd input field should be based on the 1st input field. Means when I'll select for example 'CHI' (code for CHINA) in the 1st input field the 2nd field meant for country name should show all country name with value 'CHINA'. But the problem is that all values related to each field are in different table with no foreign key relationship and also some combinations are in single table..
I have tried the import and export parameter method for search help but no luck till now.
Can anyone please suggest me how to implement this scenario..
Thanks in advance...
sekhar

Hi sekhar,
Your Requirement can be implemented by OVS(Object Value selector) This is the custom search help .So that you can define on what basis the value has to be fetched.
Look at the below link
http://wiki.sdn.sap.com/wiki/display/WDABAP/ABAPWDObjectValueSelector(OVS)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606288d6-04c6-2c10-b5ae-a240304c88ea?quicklink=index&overridelayout=true
You need to use the component WDR_OVS.
It has 3 phases
In phase 1
     You will fetch the value from input field to F4 help dialog box.
In phase 2
     You will generate the search results , in this phase look for the input value given in field 2 and accordingly generate search result for the field 3.
In phase 3
     The selected value will be returned to the original screen.
Regards
Karthiheyan M

How to provide search help for input field

Hi Experts,
I have a field WBS elements on my selection screen view1 . I need to provide search help for that.
Can anyone please help how to proceed with that?
Regards,
Chitrasen

hi ,
pls refer this WIKI on SDN :
http://wiki.sdn.sap.com/wiki/display/WDABAP/UsingSearchhelpattachmentsforWebDynproABAP
refer this online SAP help :
http://help.sap.com/saphelp_nwmobile71/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm
also go thru this thhread :
Re: search help event
regards,
amit

Search help for custom field in SRM

Hi All,
Im new to abap. I want to add(enhancement) custom input field with search help function for organization unit. I hv added input field and its displaying in portal also.
Now i want to add f4 help. Can u please help me in this regard. Can u tell me the steps to do for adding f4 help.
Thanks,
Rani.

add search help to input fields data type. or you could assign search help via structure there that field is defined. you could enhance standard code adding custom search help which is called via FM. Choose the way.
best regards,
dez_

How to create Search Help for a field in Table control !!

Hello Friends,
              I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
Senthil

Check the sample code:
*& Include           ZSRO_MPRN_SEARCH                                 *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
        stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl     = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = c_x
      determine_loop_index = c_x
    TABLES
      dynpfields           = lt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
    MOVE lt_dynpfields-fieldvalue TO ws_outcode.
    ws_len = STRLEN( lt_dynpfields-fieldvalue ).
    IF ws_len GE 7.
      ws_len = ws_len - 3.
     ws_icode = ws_code+ws_len(3).
      lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
      CONCATENATE lt_dynpfields-fieldvalue '%'
          INTO ws_outcode.
      CONDENSE lt_dynpfields-fieldvalue.
   REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
    ELSE.
      CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
        INTO ws_outcode.
    ENDIF.
   ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl     = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = lt_dnpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode.
    ELSE.
MPRN blank and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1.
    ENDIF.
ELSE.
MPRN exist and Post code exist
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode AND
                   mprn EQ lt_dnpfields-fieldvalue.
    ELSE.
MPRN exist and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE mprn EQ lt_dnpfields-fieldvalue.
    ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MPRN'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select MPRN'
      value_org       = 'S'
    TABLES
      value_tab       = i_mprn1 "lt_mprn
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
    IF sy-subrc EQ 0.
Updating post code
      CONCATENATE i_mprn1-outcode i_mprn1-incode
                    INTO ws_postcode
                         SEPARATED BY space.
      MOVE ws_postcode TO i_mprn-post_code.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
      ws_dynpfld-fieldvalue = ws_postcode .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
Updating MPRN
      MOVE i_mprn1-mprn TO i_mprn-mprn.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-MPRN'.
      ws_dynpfld-fieldvalue = i_mprn1-mprn .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ELSEIF sy-subrc EQ 2.
    MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE.                    "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
       stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl     = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = c_x
      determine_loop_index = c_x
    TABLES
      dynpfields           = lt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
    MOVE lt_dynpfields-fieldvalue TO ws_outcode.
    ws_len = STRLEN( lt_dynpfields-fieldvalue ).
    IF ws_len GE 7.
      ws_len = ws_len - 3.
     ws_icode = ws_code+ws_len(3).
      lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
      CONCATENATE lt_dynpfields-fieldvalue '%'
          INTO ws_outcode.
      CONDENSE lt_dynpfields-fieldvalue.
   REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
    ELSE.
      CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
        INTO ws_outcode.
    ENDIF.
   ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl     = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = lt_dnpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode.
    ELSE.
MPRN blank and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1.
    ENDIF.
ELSE.
MPRN exist and Post code exist
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode AND
                   mprn EQ lt_dnpfields-fieldvalue.
    ELSE.
MPRN exist and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE mprn EQ lt_dnpfields-fieldvalue.
    ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MPRN'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select MPRN'
      value_org       = 'S'
    TABLES
      value_tab       = i_mprn1 "lt_mprn
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
    IF sy-subrc EQ 0.
Updating MPRN
      MOVE i_mprn1-mprn TO i_mprn-mprn.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-MPRN'.
      ws_dynpfld-fieldvalue = i_mprn1-mprn .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
     ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
Updating post code
      CONCATENATE i_mprn1-outcode i_mprn1-incode
                    INTO ws_postcode
                         SEPARATED BY space.
      MOVE ws_postcode TO i_mprn-post_code.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
      ws_dynpfld-fieldvalue = ws_postcode .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
     break gblap0.
     ws_dynpfld-stepl = mprn-current_line.
     LOOP AT i_mprn.
       MOVE i_mprn1-mprn TO i_mprn-mprn.
       MOVE ws_postcode TO i_mprn-post_code.
       MODIFY i_mprn INDEX
                mprn-current_line." transporting MPRN POST_CODE.
     ENDLOOP.
**code changed by laxman 10.08.2005
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ELSEIF sy-subrc EQ 2.
    MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE.                    "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
          gntc LIKE iflot-zzgntc,
        END OF lt_gntc.
CLEAR:   lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZZGNTC'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select Gas Nomination Type Code'
      value_org       = 'S'
    TABLES
      value_tab       = lt_gntc
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE.                    "GNTC_F4 INPUT
*&      Module mprn1_f4 INPUT
      text
MODULE mprn1_f4 INPUT.
DATA: lt_f4          TYPE ddshretval OCCURS 0 WITH HEADER LINE,
        lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
        lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
        lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
        stepl_index1 TYPE systepl.
DATA : i_dnpfld1      LIKE dynpread OCCURS 0 WITH HEADER LINE,
         ws_dyname1     LIKE d020s-prog,
         ws_dynumb1     LIKE d020s-dnum,
         ws_dynpfld1    LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
         lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
         stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl     = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
      determine_loop_index = 'X'
    TABLES
      dynpfields           = lt_dynpfields1
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'IFLOT'
      fieldname         = 'I_MPRN-MPRN'
      searchhelp        = 'ZS_MPRN_PC'
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
    TABLES
      return_tab        = lt_f4
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-mprn.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
    ws_dynpfld1-fieldvalue = i_mprn-mprn.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-post_code.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
    ws_dynpfld1-fieldvalue = i_mprn-post_code.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDMODULE.                 " mprn1_f4 INPUT
*&      Module pstlz1_f4 INPUT
      text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
          lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
          stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl     = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
      determine_loop_index = 'X'
    TABLES
      dynpfields           = lt_dynpfields1
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'IFLOT'
      fieldname         = 'I_MPRN-POST_CODE'
      searchhelp        = 'ZS_MPRN_PC'
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
    TABLES
      return_tab        = lt_f4
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-post_code.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
    ws_dynpfld1-fieldvalue = i_mprn-post_code.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-mprn.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
    ws_dynpfld1-fieldvalue = i_mprn-mprn.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDMODULE.                 " pstlz1_f4 INPUT
Regards,
Prakash.

Search help for currency field

I am not able any search help for currency field , CUKY of lenght 5
If anyone knows it please tell

You can use the data element WAERS / refer to field BKPF-WAERS. The search help will show up automatically as the field BKPF-WAERS, has check table TCURC.
Also see the "Origin of Input help" column in "Entry help/ check" tab in SE11 for table BKPF, it says - "Input help implemented with check table".
For example in tcode FB01, the currency field on the selection screen is BKPF-WAERS. The search help is displayed
Hope it helps

Hi search help for my field?

Hi friends,
               I have got a input field in screen painter with name FORMNo.
Formnos are stored in Zform table.
I want to create search help for this field please can anyone share me the procedure for createing the search help for my field. Its veru veru urgent please help me with answer.
points will awarded for helpful answer.
THks

hi,
PARAMETERS: p_filnam TYPE ibipparms-path.
For value request use the below function
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_filnam.
And
you have to call one functio nmodule
CALL FUNCTION 'F4_FILENAME'
EXPORTING
   program_name        = syst-cprog
   dynpro_number       = syst-dynnr
FIELD_NAME          = ' '
IMPORTING
   file_name           = p_filnam-----pass the p_filnam here
Reward Points if usefull
Regards
Fareedas

How to create Search Help For Ztable fields

Hi all,
Please let me know How to create Search Help in SE11(what are the parameter i should pass)
and How to maintain search help for Ztable fields at DIctionary level (in SE11) and programming level.

hello .
there are two types of search helps .
1. elementary search help .
2. collective serch help
Below are the steps to create elementary search helps :
1 In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
2.then youget a option elementary or collective search as per you r need .
3.select Elementary search help and choose
4.write explanatory text in the field Short text.
5. in the selection method give the name of the table or a view .
6 . Select the fields that should be used for value selection or in a hit list .
7. then define the attributes of the search help .
8 Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
9 .define the dialog type of the search help.
The dialog type tells how the hit list will be displayed in the input help.
10 . save and activate .
plz reward if usefull
Thanks ,
Abhishek .

Search help for a field in table control based on another field value

Hi,
I want to attach the Search help for a field in table control based on another field value.
Please help me asap.
Will be highly rewarded

HI,..
Check these links
search help in table control
Re: How to create Search Help for a field in Table control !!
How to create Search Help for a field in Table control !!
F4 Help In Table Control
Control table F4 help
Problem in F4 help in screen field
check this code
DATA: BEGIN OF it_value4 OCCURS 0,
         TEXTCODE LIKE ZXX-TEXTCODE,
         TEXTDESC LIKE ZXX-TEXTDESC,
       END OF it_value4.
progname = sy-repid.
dynnum   = sy-dynnr.
         SELECT TEXTCODE TEXTDESC
           FROM xxxx
           INTO CORRESPONDING FIELDS OF TABLE<b> it_value4</b>
          WHERE LOSS_CODE =<b> IT_VALUE1 .</b>
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield    = 'TEXTCODE'
      dynpprog    = progname
      dynpnr      = dynnum
      dynprofield = 'ITVALUE-TEXTCODE' "-->UR 4 th filed value in screen
      value_org   = 'S'
    TABLES
      value_tab   = it_value4.
endmodule.
Message was edited by:
        veereshbabu ponnada

Search Help for Custom field in Sourcing Cockpit

Hi SRM Experts,
I added custom field "rush order" in the Structures as per requirement. I added code in MODIFY_SCREEN function module. Search help is working for "rush order" in Process Purchase Orders (to search PO) and Check Status (Searching Shopping Cart). But it is not working in sourcing cockpit. Please guide or suggest me is there any additional settings or programming is required to have search help for custom fields in Sourcing Cockpit.
Thanks a lot in advance.
Thanks,
Koyya

Hi SRM Experts,
Please let me know any suggestion on this issue.
Thanks a lot in advance.
Thanks,
Koyya

How to change search help for standard field in me51n.

hi frnds,
I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
best regards,
sudip biswas

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

Search Help for a Field of a Table Control

I have designed a screen using 'Table Control' with fields like Date, BoxNo,Quantity etc. Kindly tell me how to go about providing a search help for the field 'BoxNo' of this table control so that the user is not required to scroll down the entire table/list for selecting a particular box no.
Thanx in advance,
Alok.

When you go to screen painer, in screen painter attributes window, there is an atribute called search help, fill it.
Another way is, after PAI put:
PROCESS ON VALUE-REQUEST.
FIELD box_no MODULE f1_help_box_no.
And gives logic in that module using FM F4IF_INT_TABLE_VALUE_REQUEST.
Regards.

How to add a search help for a field in Screen Personas?

I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
I found a property in the help document named "IsLookupSupported". Is it the key? But I saw it was gray in the field I created, and its value is "false". I could not change it.

Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin

Search help for A field in select option which doesnt have search help in c

u have table in QM which is QMFE in whihc field FECOD which doesnt have search help , but my requirement is that in select option in report to have users to see its search help, anyone there to help me

Hi sridhar loganathan,
For this goto SE11 and create a ZFECOD Search help for that field. In Defination Tab enter table name
QMFE and Enter Z_F4_FECOD_EXIT in Search help Exit.
Then create a FM in SE37 as Z_F4_FECOD_EXIT under a FG. And then write code as follows for example:
FUNCTION Z_F4_REG_EXIT.
""Local Interface:
*" TABLES
*"      SHLP_TAB TYPE SHLP_DESCR_TAB_T
*"      RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*"     VALUE(SHLP) TYPE SHLP_DESCR_T
*"     VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
TYPES: begin of ty_code,
          dam_code type QMFE-FECOD ,
        end of ty_code.
DATA : tw_code type ty_code,
         ta_code type table of ty_code.
   IF "callcontrol-step <> 'SELONE' AND
        callcontrol-step <> 'SELECT' AND
        callcontrol-step <> 'DISP'.
      EXIT.
    ENDIF.
   IF callcontrol-step = 'SELECT'.
      CALL FUNCTION 'F4UT_PARAMETER_ALLOCATE'
        EXPORTING
             PARAMETER         = 'FECOD'
        TABLES
             SHLP_TAB          = shlp_tab
             RECORD_TAB        = record_tab
        CHANGING
             SHLP              = shlp
             CALLCONTROL       = callcontrol
        EXCEPTIONS
             OTHERS            = 3.
   ENDIF.
   IF callcontrol-step = 'DISP'.
Get the Region
      CALL FUNCTION 'F4UT_PARAMETER_VALUE_GET'
         EXPORTING
              PARAMETER         = 'FECOD'
              FIELDNAME         = 'FECOD'
         TABLES
              SHLP_TAB          = shlp_tab
              RECORD_TAB        = record_tab
              RESULTS_TAB       = ta_code
         CHANGING
              SHLP              = shlp
              CALLCONTROL       = callcontrol
         EXCEPTIONS
              PARAMETER_UNKNOWN = 1
              OTHERS            = 2.
       IF SY-SUBRC = 0.
          SORT TA_CODE BY DAM_CODE.
Deleting duplicate damage codes in Internal Table ta_code
          DELETE ADJACENT DUPLICATES FROM TA_CODE COMPARING DAM_CODE.
Passing changed Internal table to FM
          CALL FUNCTION 'F4UT_PARAMETER_RESULTS_PUT'
          EXPORTING
             PARAMETER         = 'REGION'
             FIELDNAME         = 'REGION'
          TABLES
             SHLP_TAB          = shlp_tab
             RECORD_TAB        = record_tab
             SOURCE_TAB        = ta_code
          CHANGING
             SHLP              = shlp
             CALLCONTROL       = callcontrol
          EXCEPTIONS
             PARAMETER_UNKNOWN = 1
             OTHERS            = 2.
       ENDIF.
   ENDIF.
ENDFUNCTION.
Revert me for any clarifications.
Regards,
Suneel G.

Search help for input field

Similar Messages

Maybe you are looking for