Search help icon in table

Hi,
While using OVS(Object value selector) search help or any other search help in table column, We are not finding the f4 help icon in the table column.
Is there any method to get the f4 help icon?
Regards
M.Karthiheyan

Hi,
You can refer following thread, it is for the similar requirement of displaying Icon --
[How to display different icon within WDA alv table base on row data ?;
Here you need to code in Method for OVS rather than DOINIT, as specified in the thread for their scenario.
Thanks.
Kumar Saurav.

Similar Messages

Using search help icon for a button

Hi Experts,
For a Webdynpro layout I have created a button and I want to assign an icon/image similar to the search help image(two squares type).
Is there any way to assign the webdynpro search help icon to a button?
I was searching in ImageSource under Button property but did not find any similar image. Else Is there any option to upload and assign an image to the button?
Thanks.

Hi,
Under properties of button press F4 in image source attribute, you can select standard SAP icons, if not you can upload icon to your web dynpro component and then press F4 and select Component images tab and select your icon.
For uploading icons to web dynpro abap check this reference: [Displaying Logos in WDA|http://www.****************/Tutorials/WebDynproABAP/Logo/Page1.htm]
Hope this helps u.,
Thanks & Regards,
Kiran.

How to attach a search help in a table control coloumn based on the search

Hi,
Can anyone help me for attaching a search help in a table control coloumn based on the search help value of another coloumn
in the same table control.
Regards,
Ratheesh BS

check
Re: Switch Search Help during runtime

Attach search help to standard table field

Hi,
I need to attach search help to standard table field VBKD-EMPST.
I have create a z search help and taken acess key from SAP.
But unable to attach this to standard table field.
Kindly help.
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Oct 27, 2010 6:11 PM

Hi,
just go throw this link
Re: Attaching Search Help to a field
I hope this will help u
Thanks
Regards
Akhilesh Singh

Search help icon for select option

hello all...
can some one let me know , how to attach F4 help icon to select option..??
in select option im referrin to a data element, this data element has a domain which has value range.
if i press F4 on the select option, im gettin the values in the search help but the icon is not appearing..
any suggestions...
regards..
vishal

Hi,
Select TABLE-FIELD GOTO>Search help>For field.
If you have Search help you can assign here or else you need to create search help through SE11.
Or programatically you can code like below.
See below code........
selection-screen: begin of block B1 with frame title text-001.
select-options: s_pernr for zfdmr_records-pernr,
selection-screen end of block B1.
data: begin of t_itab occurs 0,
      pernr like zfdmr_records-pernr,
      end of t_itab.
DATA: t_return like ddshretval occurs 0 with header line.
*at selection-screen on value-request for s_pernr-low.
perform get_values changing s_pernr-low.
*at selection-screen on value-request for s_pernr-high.
perform get_values changing s_pernr-high.
*&      Form get_values
      text
     -->P_S_PERNR_LOW text
FORM get_values CHANGING    P_S_PERNR.
refresh t_itab.
clear t_return.
select pernr from zfdmr_records into table t_itab.
delete adjacent duplicates from t_itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      RETFIELD               = 'PERNR'
PVALKEY                = ' '
     DYNPPROG               = sy-cprog
     DYNPNR                 = sy-dynnr
     DYNPROFIELD            = 'ZFDMR_RECORDS-PERNR'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     VALUE_ORG              = 'S'
     MULTIPLE_CHOICE        = ' '
     DISPLAY                = 'F'
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
    TABLES
      VALUE_TAB              = t_itab
FIELD_TAB              =
     RETURN_TAB             = t_return
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE t_return INDEX 1.
p_s_pernr = t_return-fieldval.
ENDFORM.                    " get_values
Thanks.
If this helps you award points and close the thread.
Message was edited by: Deepak333 k
Message was edited by: Deepak333 k

Dynamic Search Help in WDA Table

Hello Expert,
I would like to assign the standard search help for Webdynpro abap table in item level,
I know using the below code we can assign the search help for particular input field ,
DATA lo_nd_info TYPE REF TO if_wd_context_node_info.
           lo_nd_info = lo_nd_eqt_partner->get_node_info( ).
           CALL METHOD lo_nd_info->set_attribute_value_help
             EXPORTING
               name            = 'PARTNER' " Your attribute Name
               value_help_mode = '121' " Valid value help mode
               value_help      = 'DEBI'. " Search help name.
But my scenario is i have one table which is having threee columns,
Partner type   partner   name,
so based on the partner type i would like to call the standard search help ,
if the line item 1 is having partner type 'KU' then i need to assign DEBI search help
if the line item 2 is having Partner type 'LI' or 'AG' then i need to assign KRED search help ,
If the line item 3 is having Partner type 'AP' then i need to assign VKNK search help
so please help me to achieve the same.
Thanks,
Sankar

One method to achieve this functionality would be :
1. Find out the maintenance screen and function group of the table maintenance generator say 2000 and ZFGRP.
2. Go to SE80 and open ZFGRP screen number 2000.
3. For Field number 1 , it is assumed that there is already a standard search help for it.
4. For field 2 - create a module in Process on Value Request Event in PAI of the maintenance screen ( Similar to any module pool program)
5. Use FM DYNP_VALUES_READ to read the value of field 1 on the screen ( Because this is before enter is pressed and field 1 on the module pool porogram would not be populated with value )
6. While creating internal table for this FM, filter out all the values that are not required based on value obtained above.
call the FM F4IF_INT_TABLE_VALUE_REQUEST( In Process on Value request event of field 2 in PAI)

FM to find Search help for a table field

Hello Colleagues,
is there any function module which would return the search help associated with a table field ?
I tried with the FM F4IF_DETERMINE_SEARCHHELP but it returns search help that is associated with either to table field DE or search helps associated with the value table fields. I need to find only
the search helps that are associated with a table field but not the value tables or fixed values.
For ex. If i pass table_name = 'SFLIGHT' and field_name='CARRID' then it should return me S_CARRIER_ID. but if i pass field_name='CONNID' then it should return nothing..
Best Regards, JVR

Hi Kishore,
Use the Function Modulein the F4 help associated with a table field ...
CALL FUNCTION ' HELP_VALUE_GET"
EXPORTING
fieldname = 'CARRID' "field name in the table you refer
tabname = 'SFLIGHT' "Table name
IMPORTING
select_value = S_CARRIER_ID. "Selected field
Regards,
Prabhudas

Search help icon at screen

Hi all,
I have created a search help and linked it to a data element.
On the field, on clicking on F4 ,I am getting the required values.
But the F4 help symbol which comes beside a screen field ,is not coming on my screen. How can I have that icon beside the screen field?
Thanks in advance.
Regards
Ananya

Hi,
I have referred to the right field and I am getting the values at F4. Only the icon for search help is not coming
Thanks&Regards
Ananya
Message was edited by:
Ananya Mukherjee

Change date help icon inside table

Hello,
I've created a new theme and I've changed the date help icon(Theme Editor/Simple Elements/Labels and Fields). I can see new icon in portal but when displaying it from a cell inside a table, it displays the standard icon. Please, I need to show just our date help icon and not the standard one. It should have changed all date icons from our WD java application.
In addition, it happens the same with paginator. I've modified the Complex element: Paginator and all tables display my colours except for UWL paginator. Why UWL table is not showing the proper colours?
Thank you.

I think rather than trying some quirks, you are better off opening a message with SAP.
Thanks
Prashant

A problem creating a Search Help against domain table dd07v...

At present I use FM DDIF_DOMA_GET to retrieve the Domain Values for a given field/domain. I then populate a drop-down list box with these values and use in a conventional dynpro.
However, what I would like to do is create a search help against the field characteristics which access table dd07v and retrieve the values for the domain. I'm stuck on the search help part because I don't know how to define the domain name within the search help so that the correct dd07v values are retrieved..
Do you think this is possible, or should I give up now.?.
Jas

Problem resolved. You can hard code values, like the domain name within the search help.
Although I have found that if you don't use a search help and you have domain values then your drop-down list values will be automatically populated from the domain values for the field. At least in my dynpro it does.
Jas

Search help to a table field

Hello Folks,
I have an immediate requirement to assign a search help to a specific field in a Table.Requirement is as follows:
requirement:
I want the search help to be populated for the field HRP1000-SHORT when HRP1000-OTYPE='O'.
Values of search help are to be populated from another Custom table field1 where field2 = 'x'.
Please help me out in fixing this.

*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
parameters: p_vbeln type vbak-vbeln,
            p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
          posnr type vbap-posnr,
          matnr type vbap-matnr,
          arktx type vbap-arktx,
        end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
       exporting
            dyname               = sy-cprog
            dynumb               = sy-dynnr
            translate_to_upper   = 'X'
       tables
            dynpfields           = dynfields
       exceptions
            invalid_abapworkarea = 1
            invalid_dynprofield = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription = 6
            invalid_parameter    = 7
            undefind_error       = 8
            double_conversion    = 9
            stepl_not_found      = 10
            others               = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
       exporting
            input = p_vbeln
       importing
            output = p_vbeln.
select posnr matnr arktx into table help_item
                 from vbap
                      where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield    = 'POSNR'
            dynprofield = 'P_POSNR'
            dynpprog    = sy-cprog
            dynpnr      = sy-dynnr
            value_org   = 'S'
       tables
            value_tab   = help_item.

Connect search help to standard table

hi!
i want to connect search help to structure P0001-MSTBR, without a repair.
is it possible? and if so how?
regards
yifat

Hi,
If you want to add a search help to a structure or a table, it would eb a modification. No other way.
However, you could decide to program the F4 in your transaction. You could then make use of the FM F4IF_INT_TABLE_VALUE_REQUEST. Just pass to this FM, an internal table of values. Ofcourse you would have to populate some other fields like field name, etc.
Remember to reward points.
Rgds,
Prashanth.
SAP.

Change default search help icon

Hi All,
I am on SRM 4.0. When I want to launch search help for any field from ITS server, I click on the drop down list and select the last entry. This last entry has value '...', is there any way we can change this value? User wanted text to be displayed instead of '...', appreciate any help, thanks!
Regards,
Hock Lye.

Hello
call se80.
Internet Service bbpglobal
BBPFUNCTIONS_DEF
you have to check the F4_* functions.
<option value="`VALUE_OLD`">`#callSHelp`</option> is generating the ".." entries.

Search Help on Table Control - Fill more than one field in the table?

Hey everyone,
I have built a screen with a Table Control on it... the fields of the table control are linked to an internal table... The internal table has the line type of a structure I've defined in the data dictionary. Within that structure in the data dictionary, I've linked some fields to search helps (For example, a MATNR and CUSTOMER search help)... I've defined in the structure definition which fields from the search help are to be returned to which fields in the structure.
The problem is, even though I have the search help set to export both the customer number and location when using the search help on the customer field, it still does not fill the location field within the table. Is this a limitation of using search helps within table controls?
I'm also finding that by defining the search help through the structure, instead of directly within the screen, the search help round button does not show up on the field, yet I can still press F4 to bring up the search help. Is there a reason why it's not showing the search help clickable button even though it works fine using F4?
For doing search helps in Table Controls, is it better to just build the search help, attach it directly to the field in the table, and then after the user picks the single field, use the PAI to run a select and fill the rest of the fields required?
Thanks,
Dallas

Hi Dallas,
(1)
What i understood is that you added a search help by defining it in the internal table type for a field customer number..in the search help you have 2 fields customer number and location...user press the search help ..then you need to fill 2 different fields or 1 field?
if you need to fill the customer location or location (only one) then you need to set the "import" in the search help for whichever is required.....
if you need to fill 2 or more different fields..then you can use the technique you have mentioned last , to do a select in PAI and fill the fields....but this you can use if the combination for the fields is unique...eg: u have customer number and location..if customer X can be mapped to location X and location Y..when a select statement is done there are 2 options..so in such cases it is better to leave the option to the user otherwise if there is a clear mapping like customer X can be mapped only to location X then you can use the select..
(2)
usually when you define it as a type in the internal table the icon doesn't show up..but you can do alternative like mentioned..go to the table,find the search help for the required field if present or create a new one if required and place the search help mentioned in the screen itself..so as to see the icon...sometimes users are adamant that they need the search help icon to be seen..so it depends on if your user
(3)
as in the example of customer number and location mentioned we can provide them different search helps and do the needful processing in PAI to fill the fields
Table controls may be used for different purposes and requirements....even a checkbox,push button can be placed as a field in table control and used,but yes most of the time requirements are like what is mentioned in your case...
Regards
Byju

Creating a new Search Help on a standard SAP table field?

Good day, everyone!
As part of a report I am writing, the customer would like to have Search Help added to the AUFEX field in table AUFK. They would like this functionality so that when they are changing an order via t-code ko02, they can get a list of valid values to put in field AUFEX. I would like to tie it to a zTable I've created; in my zTable, I have just 2 fields: a key value (that will go into AUFEX) and a text description of the key value. This zTable is used in my report.
While I've created a Search Help on this table already for table maintenance, I've never added a custom Search Help to an existing standard SAP table field before. I've done some Googling and other searching to see what I need to know, but I've only been able to find information on Collective Search Helps. AUFEX doesn't yet have a Search Help field, so I don't think Collective Search Helps is my answer.
Is this possible? Can I add a custom Search Help to a standard SAP table field that doesn't have any Search Help linked to it yet? Is there an existing thread or guide somewhere that can tell me how to do this?
Thank you!

Hi
Yes u can: u can assign the search help to (A) data element livel or (B) field table livel.
After creating your search help:
A) Run SE11, insert your data element (AUFEX), press edit and insert the search help in "Search Help" area on DEFINATION tab;
B) Run SE11, insert your table (AUFK), press edit, place the cursor on your field (AUFEX) and go to GoTo->Search help->for field
But u should consider it'll mean to change a standard object for both cases: so u need to get the access key from your OSS.
Max

Search help icon in table

Similar Messages

Maybe you are looking for