Search Help with value on SE11
Hi Gurus,
I have two parameters on my screen, PARTNER and PSOBKEY. I have created a Search Help on SE11 for the second parameter, and this search help has that 2 parameters too.
First I enter PARTNER, then I open the search help for PSOBKEY, and I want the value on PARTNER to be on the search help.
How I can do this from the SE11?
Thanks for your help.
J. Garibaldi
Hi Garibaldi,
In your search help the PARTNER should be one of the search help parameters. It should be marked as IMP (Import) parameter. The name of this parameter in the search help should be same as that on your screen. The parameter PSOBKEY would be the EXP (Export) parameter of your search help.
If you maintain above things, when you enter the PARTNER field on the screen and open the search help of PSOBKEY, the value of the PARTNER screen field would be automatically copied and imported into your search help.
Please refer to the SAP help http://help.sap.com/saphelp_47x200/helpdata/EN/4f/991f82446d11d189700000e8322d00/frameset.htm for more detailed understanding.
Regards,
Suresh
Similar Messages
-
Search help default value in SE11
Hello!
I would like to set a default value to a self-made search help.
I referred the following link in this theme:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/73/5414f0adbd11d194f200a0c929b3c3/frameset.htm
This docu tells me, how can I enter default value to a field. But life is not so easy, because I have to EXCLUDE a constant.
I mean default value can be a constant like this: 'A'.
But I would like to set one like this: <>'C' to exclude all documents with the status C.
If I test the help search in runtime it is accepting values to exclude but I would like to pre-set the value.
Thank you for any answers
TamáHi,
There is no simple solution for this. If you have a view in your selection method instead of the table then you can define your requirement in the selection TAB to restrict based on your conditions.
Without using a view the other option is to use a search help exit.
Think view is a better and safe bet.
Cheers
VJ -
Hi
I have created a search help with selection method --> MCHB. One of the fields i use is CLABS. Do you know how to exclude the zero values of this field. Is there any trick ( i suppose the search help exit) to write code in this. Any ideas?Hi Antonis,
In SE11 you can create a Help View with filter, and then use it as your selection method
regards,
Paulo -
Hi Guru Search Help with Restriction
Hi guru,
What is my requirment . I created elementry search in se11 and i used this search in dialog program. Its shows all company code and commidity code.
But boss I want restrict this search help only for one Company Code (GB).It should show company code and commidity code only GB comapny Code.
Where I can restrict this search help.
Please give me possible help.
Point will rewards.
Thanks&Regards
RamanaHi Mr. Kumar,
I'll give one examle for which I had done the same scenerio for PP module for version selection...Please find the eg. code. In this scenerio I had restricted only 4 versions....
I'll give you code from select option till at selection-screen on value request...
In this I have also done the validation part...
First create a elementary search help with required fields... As per my scenario I had created two fields VERSB & VBTXT. In my scenario I have given restriction on VERSB....
then the same search help you have to use in the program to pass to the parameters..
****Select Options....
SELECT-OPTIONS: S_VERNUM FOR T459V-VERSB OBLIGATORY NO-EXTENSION NO INTERVALS.
*****At Selection-Screen on value request....
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_VERNUM-LOW.
PERFORM F4HELP.
******Form F4HELP....
FORM F4HELP .
REFRESH IT_DDSHSELOPS.
CLEAR WA_DDSHSELOPT.
WA_DDSHSELOPT-SHLPNAME = 'ZVERSB'.
WA_DDSHSELOPT-SHLPFIELD = 'VERSB'.
WA_DDSHSELOPT-SIGN = 'I'.
WA_DDSHSELOPT-OPTION = 'EQ'.
WA_DDSHSELOPT-LOW = '04'.
APPEND WA_DDSHSELOPT TO IT_DDSHSELOPS.
WA_DDSHSELOPT-LOW = 'TC'.
APPEND WA_DDSHSELOPT TO IT_DDSHSELOPS.
WA_DDSHSELOPT-LOW = 'TE'.
APPEND WA_DDSHSELOPT TO IT_DDSHSELOPS.
WA_DDSHSELOPT-LOW = 'TL'.
APPEND WA_DDSHSELOPT TO IT_DDSHSELOPS.
CALL FUNCTION 'F4_FIELD_ON_VALUE_REQUEST'
EXPORTING
TABNAME = 'T459V'
FIELDNAME = 'VERSB'
SEARCHHELP = 'ZVERSB'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'VERSB'
SELECTION_SCREEN = 'X'
CALLBACK_SELOPT = IT_DDSHSELOPS.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
*******At selection Screen on above select option field...for validation
AT SELECTION-SCREEN ON S_VERNUM.
PERFORM VALIDATEVERSIONS.
*******Form VALIDATEVERSIONS
FORM VALIDATEVERSIONS .
REFRESH R_VERNUM.
CLEAR R_VERNUM.
R_VERNUM-SIGN = 'I'.
R_VERNUM-OPTION = 'EQ'.
R_VERNUM-LOW = '04'.
APPEND R_VERNUM.
R_VERNUM-LOW = 'TC'.
APPEND R_VERNUM.
R_VERNUM-LOW = 'TE'.
APPEND R_VERNUM.
R_VERNUM-LOW = 'TL'.
APPEND R_VERNUM.
IF NOT S_VERNUM-LOW IN R_VERNUM.
CALL FUNCTION 'C14Z_MESSAGES_SHOW_AS_POPUP'
EXPORTING
I_MSGID = 'ZPP'
I_MSGTY = 'E'
I_MSGNO = '015'
I_MSGV1 = 'Please Select'
I_MSGV2 = 'One of these'
I_MSGV3 = 'Versions'
I_MSGV4 = ': 04, TC, TE, TL.'.
CALL SCREEN 1000.
ENDIF.
ENDFORM. " VALIDATEVERSIONS
This code will help you to work on your query...
Please reward a point . I am sure this will help you....
Cheers.....
Sagun Desai.... -
SAP CRM Search Help - defaulting values in search help screen
Hi All,
I am working on search help object in service order(Amount allocation ) BTAMNTALL component view name vIEW:BTAMNTALL/HdrBillplanDet and field name STRUCT.AC_ASSIGNMENT. in that block if we select account assignment type as ERP cost center it will give standard search help in Select account assignment field.
Its basically calling the standard search help CRMT_AC_ASSIGN_KOSTL_E. After pressing F4 it will display the popup Controlling area cost center and description. Basically I need to default the Controlling area in F4 help based on some logic.I am not sure where to write code for this one.
Please find the attachment where I need to default the value. any help is appreciated.
Thanks,
Sapsar.At least can you read the document I provided carefully? the point 2.3.1.2 give you the answer.
Anyway if the document doesn't specify "defining a default value" but give you some ideas/hints, you only need to use a little your imagination. Like:
1- Use a custom search help with a constant (static)
2- Use a custom search help with a search exit to determine the data that you need from the sales org of course you need to add the orgunit as an input parameter for the search help and supress the input parameter which will be determined in the search help exit (dynamic)
3- Create a value node for the context (hidden) and put the info you need once you select the sales org in the hidden attribute/s, this hidden attributes should be mapped in the get_v method (dynamic, not sure if this will work, I never tried, but will be nice if you try and give us some feedback) -
Hai,
Can any one give example for search help with Programming?
I hope we can create search help with help of coding.
With Regards,Jaheer.yes u can create search help by using match code in programs
for eq
go with abap editor se 38
provide the name of program
parameters : vendor like lfa1-lifnr matchcode object yzob.
double click on yzob
provide description for search help
provide selection method
provide search help parameter
enable check box for import and export
provide lpos
spos
save check activate
press f4 for check and import values i.e it will display a records list available in database table
rewards points please -
Select-Options search help with where
Hi Experts,
I need to have a search help in my selection screen with a Where clause.
I've tried to search it but I cant find answers.
The logic is like this, wherein the search help for my selection screen should just have the value PM001 and ZMIS.
SELECT-OPTIONS stsma estat tj30 FOR s_eqpstt FOR tj30t-estat WHERE stsma = 'PM001' and stsma = ZMIS.
ThanksSorry, a little more detail... create a view, of search help type, with the columns you present and restrict those two values. Then create the search help with that view. Then add the search help to the select-option.
Regards,
Edgar -
Generic problem for search help without values
Hi,
Always I open a search help without values I get the warning popup "No values found" but after this no link let me come back to the previous screen.
Does anybody know how I can solve this (in a standard way)
thanks
regardsHi
It seems to be a bug in the system.
<b>Please have a look at the following SAP OSS Notes -></b>
<u>Note 574604 - Various correction reports for EBP business partner
Note 1028643 - Input help for contact persons in purchase order
Note 843008 - EBP4.0 and higher: Terms of Payment, Texts and codes
526416 Structural enhancements LFA1
698246 EBP 4.0 address maintenance: Default address for address use
701321 EBP 3.5 address maintenance: Default address for address use
701323 EBP 3.0 address maintenance: Default address for address use
701384 BBP 2.0C address maintenance:Default address for address use
690619 Plants are not transferred during location replication
641960 New processing of terms of payment in EBP 3.5
628386 Incorrect link for EBP for 'External business partners'
Note 544392 Error in search helps EBP 2.0
Note 544816 Error in search helps EBP 3.5
Note 544713 Error in search helps EBP 3.0</u>
Please raise a customer OSS message with SAP as well.
Regards
- Atul -
Search help with new selection within if more than 500 entries
Dear all,
I created a new search help and this works fine ... If I compare my search help with a default search help from SAP, I have 1 small feature that not seems to work ... With the default one, it is possible to make a new selection within the search help by clicking on the arrow down :
If I look at my search help, I don't have the possibility to make a new selection :
Does anyone how this can be done ?
Thanks in advance !
Greetz,
Kurt.HI,
Here are the general steps to get you started.
1. Identify the search help being used (on the ship-to-party field, F1 then Tech Info). I believe you want the collective search help SD_DEBI.
2. Create your own search help with the fields you want to use with SE11, like 'ZDEBI' as an example.
3. Append 'ZDEBI' to SD_DEBI. (Goto->Append Search Help).
4. Clean things up by "Hiding" the old search help. In the 'Included Search Help' tab of the collective search help SD_DEBI, there is a check box that you can tick to hide included search helps. -
Help needed with search help with ina search help
Hi all,
i have a field fld1 (non primary key )and to the dataelement of that field a search help is assigned in table ztable1.
That search help is referring to a table in which fld1 is primary key in ztable2.
I have created another search help with all the fileds in ztable1 and iam using this search help in a selection screen returning another field say fld2.
in this search help i have drill down for fld2, which in turn gives the fields of ztable2.
This is working fine.
i have created another search help with the fields of ztable1 but this time its its returning the value of fld1. for some reason in this search i am not able to see the drill downn for fld1 .
can anyone tell me how to get the drill down even the import parameteris fld1
Thankshi,
any suggestions on this
thanks -
Is it possible to make a search help with dynamic selection table?
Hi Experts,
Is it possible to create search helps with dynamic seletion tables means
i dont know the selection table names at the time of creation of search help.
These tables will be determined at runtime.
if yes, Please give an idea how to create and pass the table names at runtime.
Thanks
Yogesh GuptaHi Yogesh,
Create and fill your itab and show it with FM F4IF_INT_TABLE_VALUE_REQUEST
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'field to return from itab'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'field on your screen to be filled'
stepl = sy-stepl
window_title = 'some text'
value_org = 'S'
TABLES
value_tab = itab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
Darley -
Search Help with Web Dynpro call on another system
Hi all,
I have to create a search help with web dynpro on a field but the database is on another system... How can I do?
Many Thanks in advance...I would use a search help exit. Nothing WDA specific here, as this has been possible long before WDA came around. With a search help exit you define the search help like normal, but instead of database table or view being the source of selection, you have a function module. Within the coding of this function module you can call an RFC to read data from another system or call a web service if you need to bridge over to something that isn't ABAP based.
You can read more about Search Help Exits here:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cf/21ee52446011d189700000e8322d00/frameset.htm -
Hi all,
I have to create a search help with web dynpro on a field but the database is on another system... How can I do?
Many Thanks in advance...I would use a search help exit. Nothing WDA specific here, as this has been possible long before WDA came around. With a search help exit you define the search help like normal, but instead of database table or view being the source of selection, you have a function module. Within the coding of this function module you can call an RFC to read data from another system or call a web service if you need to bridge over to something that isn't ABAP based.
You can read more about Search Help Exits here:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cf/21ee52446011d189700000e8322d00/frameset.htm -
Restrict dictionnary Search help displayed values.
Hi,
my problem is that I have to display a search help. The search help already exists in the dictionnary and is defined using a Dictionnary Table.
I need to display the same serach help but I have to filter the results using a range of values for one of the fields and I would like to know how to proceed.
I know that user-exit exists in some search help, it's not the case here.
The kind of solutions I'm looking for is :
- directly restrict the existing search hellp values
- found a way to display a search help from abap using an internal table ( cause it's easy in this case to do fill a internal table doing the sql request myself)
- if the solutions above can't apply, doing my own search help in the dictionnary but in this case, I don't know to make this search help for values restriction.
I specify that the screen use the screen painter, it may be important ?
Thanks for your help
best Regards,
MorganHi,
Search Hels exits is only for exceptions, so in our case, we won't use the search help exits, it is better create/change the Custome one and attach the same to the fiels, there you can give the Default value for the fileds, so there you can restrict the values
or else, we have an option like, APPEND SEARCH HELPS, so by using this, we can restrict some field values, this Append Search helps, can be append to Standard Search helps also, so do Append the Standard Search help and add your field and give the Default values to restrict the user
hope you get the answer
Regards
Sudheer -
Search Help with more than one value back
Dear Experts,
We added two customer fields to the SC.
For the first customer field we created Search Help.
When picking any option from the search help we need TWO values back u2013 one value to the first customer (the field with the search help) and the second value to the second customer field (the field without the search help).
Can you please advice how can we have TWO values back from the search help?
Thanks in advance,
KerenHello Keren,
See if the below thread answers your question..
How to create a search help
Thanks
Arshad
Maybe you are looking for
-
WiFi on iPhone 5S 7.0.6 keeps dropping WiFi then not reconnecting
This is my third iPhone, had a 3GS, 4S and now this 5S. While I love my iPhone it is always dropping my WiFi connection at home. I have a Retina Macbook Pro which has zero problems, there's also two 4S's, a 5C and three iPads all connecting no proble
-
Issue regarding Sales Order creation using bapi BAPI_salesorder_createfromd
Hi Experts, Can anyone help me what is the data I'm missing in creating sales order? I tried to create sales order using BAPI_salesorder_createfromdat2 and I recieve error regarding my creation. here's the lists of RETURN for the BAPI. "SALES_HEADER_
-
Hello, we've configured a UC560 with Cisco Standards. So the CUE has the IP-adress 10.1.10.1 (Gateway .2). The CUE successfully answer a ping ! The CCA CUE diagnostics ended successful. I also can connect to CUE through CLI of the UC560. BUT : The We
-
Hi all, Recently we migrated from 9.2.0.4 to 10.2.0.4 and database performance is slow in newer version, on checking alert log we found this:- Thread 1 cannot allocate new log, sequence 1779 Checkpoint not complete Current log# 6 seq# 1778 mem# 0: /o
-
My girlfriend has a Powerbook G4 Titanium 867MHz and is running Panther 10.3.9. She had purchased it used and has had it for quite some time now. Ever since she bought it, it has had a user account labeled "Other" at the opening Log-in screen. She ha