Security: How can I limit only my Flash media enconder IP to my FMS?

How, I have flash media sever 4.5 and I want to limit only my flash media enconder that can strem to my FMS.
How can I do this?
Thanks

i try this and it works!!!
You could also use the following tags present in Adaptor.xml at FMS/conf/_defaultRoot_ where you can specify which IP address you want to allow connecting to your FMS and which ones you want to block.

    
    
    
    
    <Allow>HERE I PUT MY IPS OF FME</Allow>
    
    
    
    
    
    <Deny></Deny>
    
    
    
    
    <Order>Allow,Deny</Order>

Similar Messages

How can I run texts in flash media encoder 3.2 by the image

I have a question.
how can I run texts in flash media encoder 3.2 by the image
I do not get it done.
patrick

Hi MarcSaphiron,
Could you please send the samples?It will be much helpful to complete my
job within the deadline.
Thanks in advance.
Regards,
Sasharyuva

How can I limit Analog Output to positive only?

Hi everyone,
I'm using PXI 7350 and UMI 7774 for controlling a DC brushless motor,
the problem is that the drive for the motor only supports positive voltage input ( to adjust motor's velocity).
So how can I limit the output voltage to positive ?
I'm new to labview and I have been confused by this problem for a long time , so it will be geat if there's any example vi of that !
Thanks for any help !

What are you using for feedback? If you are only moving in one direction, then you don't have to worry about limiting the analog to positive, the controller will take care of that.

How can I tell if Adobe Flash is installed properly and upto date version?

How can I tell if Adobe Flash is installed properly and upto date version?
Hi Guys and girls, hopefully an easy question for you.
I installed Adobe flash and lightsource last night, cos I needed it to run Weebly website maker.
Anyone know if Weebly runs correctly on 10.9.1??
I have a new comp, so no previous version of flash on here, I am running OSX 10.9.1
I just want to know How I can tell if Adobe Flash is installed properly and is the upto date version?
Where do I go in the comp to find out,
If I type in Adobe flash into search it only brings up flash manager, when I click this it is an uninstaller program.
Lightsource shows in finder apps.
If I type in flash player it shows up in plugins with a version number see screen shot.
Where would I go to check for updates for things like flash on my comp?
Thanks Team,
Jason in oz. :?):)

1. Safari > Preferences > Security > Internet Plug-ins
Allow Plug-ins
2. Go to this Adobe site to check. You will see the animation above the tree.
How to know whether AdobeFlash Player is installed
http://helpx.adobe.com/flash-player.html?promoid=ISMRY

How can I limit the number of rows returned by a select stat

How can I limit the number of rows returned by a select
statement. I have a query where I return the number of stores
that are located in a given area.. I only want to return the
first twenty-five stores. In some instances there may be over
200 stores in a given location.
I know is SQL 7 that I can set the pagesize to be 25....
Anything similiar in Oracle 8i?
null

Debbie (guest) wrote:
: Chad Nale (guest) wrote:
: : How can I limit the number of rows returned by a select
: : statement. I have a query where I return the number of
: stores
: : that are located in a given area.. I only want to return the
: : first twenty-five stores. In some instances there may be
: over
: : 200 stores in a given location.
: : I know is SQL 7 that I can set the pagesize to be 25....
: : Anything similiar in Oracle 8i?
: If you are in Sql*Plus, you could add the statement
: WHERE rownum <= 25
: Used together with an appropriate ORDER BY you
: could get the first 25 stores.
Watch out. ROWNUM is run before ORDER BY so this would only
order the 25 selected
null

How can i limit the number of taps that open in safari

How can i limit the number of tabs that open in safari

preferences-->tabs
change new pages to never open in new tabs.
Now you only get the number of tabs that you open yourself with command-T or the new tab button.

When creating users in apex,how can i limit pages depending the user?

Hi,
1.When creating users in apex,how can i limit every user in the pages he can run or see depending on the user profile ?
2.Are the user that is created in apex also a user in DB ?
Thanks in advance
Yoel

Yoel -
We're talking about end users of applications you develop in Application Express, not users that login to the development environment.
You do not have to use Application Express to create user accounts for your application. Your apps can authenticate using SSO, LDAP, or other methods. If you use Application Express user accounts, that is only for convenience which may not be convenient in the long run if you have to manage those accounts, but that's up to you.
These Application Express accounts have no relation to database accounts. This situation is slightly different when using the XE database.
Your application's authorization logic determines which users can access the application, pages, or other components, that is, it is not the user account properties, per se, that control application access but rather the application's determination about the properties of the authenticated account in use that allow it to control access. For example, you don't create an account and give it attributes that say this user can access application ABC and pages 1,2, and 7. Instead, you might give that account properties like SALES MANAGER ROLE and the the application would allow only users with SALES MANAGER ROLE (whatever that means) to access certain pages.
Scott

How can I re-install Adobe Flash 10.1? System will not support 11. Thx

How can I re-install Adobe Flash Player 10.1? Don't know how I lost it but my system will not support 11. Thanks!!

dana1million wrote:
How can I re-install Adobe Flash Player 10.1? Don't know how I lost it but my system will not support 11. Thanks!!
Installing an older version exposes your system to attack as described in this Adobe security advisory: http://blogs.adobe.com/psirt/2011/09/security-update-available-for-adobe-flash-player-apsb 11-26.html
If all you want to do is watch videos on Youtube, you don't need Flash and can watch them in HTML5 instead. All you need to do is to install Firefox which supports WebM. Firefox will run on most systems without a problem: http://www.mozilla.org/en-US/firefox/8.0/system-requirements/ (download link on the same page).
After you install it, go to this site and click the link at the bottom called "Join the HTML5 Trial": http://www.youtube.com/html5

How can I limit aperture to two displays

I want to run Aperture on display 1 and 2, and Keynote on display 3. When Aperture is active display 1 has most of the application, and both of the other displays show images of whatever is selected on display 1. How can I limit aperture to just two displays.
Aperture 3.2.4 on Snow Leopard 10.6.8

John Guo wrote:
For your account choose "no access" by clicking on the triangle.
Hi a.
What ì assume John means to say is you have to block access to your "guest accounts". What John describes is what you should use for any folders and files you keep outside the Home folder of your Admin account. There's also a more advanced thingy called Access Control Lists, but I'm not going to discuss that here.
Inside your Admin account's Home folder things work a bit differently: by default, at least on my Macs, an account (even it's Administrator) doesn't have access to another accounts data except for the Public and Sites folders. All other folders are unaccessible, which is indicated by a small stop sign in the lower left corner of the folder. Exception are of course folders are that you shared on purpose through File Sharing in the System Preferences menu.
You also talk about Applications. I don't have experience with this but I believe you can create an Applications or Application/Utilities folder in your Admin account's Home folder. In this case you'll be the only one to have access to the software installed. I'm quite sure not all applications support this, and application updates might not succeed.
Which brings me to a question: you talk about "guest accounts": what is the purpose you created them? If it's just to discover the world of Mac OS X, do enable login on a Mac OS X Guest Account: good riddance of the stuff they created when they log out. If it's a bit more don't hesitate to share your thoughts. Note that these forums are in general very helpful.
Eric

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

How can I sync ONLY the top photo in the stack?

I sync various Aperture photo albums to my IPad and iPhone. The problem is that when I have 'stacked' images (eg. one image showing in the album and two other copies 'hidden' underneath), all of the photos in the stack are copied to the ipad and iPhone. So instead of seeing just one version of an image, I see as many as are in the stack. How can I sync ONLY the top photo in the stack?
Thanks for your help!

I solved my own problem.
The sync problem seemed to only occur on smart albums. There is a new check box option in Aperture 3 when making a smart album: "sync stack pick only." One click and the problem is solved!

How can I print ONLY the active document?

Whenever I go to File/Print the darn PSE 9 program sends all of the working files in the bin to the printer. I've searched online for 2 hours now looking for an answer.
I like to work with having several to many files in the 'bin' and prefer to only print the active file I'm currently working on without having to close the 'working files' before I can print. How can I print ONLY the active document or file in the project bin? Please help, I've upgraded from PSE 3 to PSE 9 and really like the updated features, but this one pain in the neck default is getting the best of me.

Thanks for your help, that works nicely. It is good to have control of the printer again.

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

How can i print only pages which have been highlighted, from a multi page file?

How can i print only pages which have been highlighted, in a multi page file.

Ah, I see want you mean. This might not be practical for you, but if you select one instance of the highlighted text and add a [space] to the little sticky note, all of the highlighted text on that page will appear in the summary.

How can I view only a subset of my contacts in iOS?

I have a large number of contacts. I sync my contacts with iPad, iPhone, and Mac Contacts. How can I group my contacts, then choose to view only one group?
I see how to create groups in OSX, although it is a little tedious to begin with to create a field for grouping for each and every contact. But I cannot see how to use these groups in iOS7, or maintain the grouping field, or view only a subset of all accounts. My goal is to create a group of personal contacts, like favorites, then see only those contacts by default but have access to all contacts if I need to.

How can I select only a portion of my screen to be recorded with QuickTime? I've seen this as an option online but can't figure out how to make the program able to highlight a certain area of my screen to be recorded.
If you are still using Snlow Leopard, then you can't. This functionality was added to QT 10.1 which runs under Lion.

Security: How can I limit only my Flash media enconder IP to my FMS?

Similar Messages

Maybe you are looking for