Select different style for each border of a rectangle

Hi,
I just wanted to have a Rectangle (or some other component) which one must have different style for each of its borders.
For example I want the top and the right border with a thickness of 2 and others with a thickness of 0 (so we can only see those two borders).
How can I do it ?
I tried with stroke (but stroke is for all borders, we can't specify which style for which border).
Thanks,
Jeff

Well it is not clear what he is looking for just rect or a component with specific border. I havnt used flex 4 so i am not sure how to get it working for that
, but i am sure it will work on the same lines.
I have also given another option to create a it using lineTo() and moveTo().But this should only be used if this rect is not going to be used as a container.
I think i should elaborate...
Create a custom component using UIComponent. In updateDisplayList() after super.updateDisplayList() call a method say drawRect(). In this drawRect() use lineTo() and moveTo() to draw the rectangle. you would have to use the component's height and width to draw the rect.
Let me know if you need more clearification...

Similar Messages

I have multiple emails, how do I add different signatures for each email address

I have multiple emails for different companies I work for, how do I add a different signature for each one, it seems like I have to use the same one for all of them

Thanks. I think I'm on the right track. I added the email address to my contacts and double clicked the image icon to change it, but it only lets me snap a new picture or select an image from another location. What is the folder location of the stock icons that come with Mac OSX?

How to configure different listener for each database in 11gR2 RAC

Hi Friends,
Current Prod Setup :
11gR2 (11.2..0.2) RAC on RHEL 5.5 with 3 SCAN Listeners on default 1521 port.
Having 4 databases which are using SCAN-IP and listening on default port only.
As per policy, we have to create separate listeners (on different port) for each database.
like,
DB1 - 1522
DB2 - 1523
DB3 - 1524
DB4 - 1525
Even If I configure 4 listeners using NETCA, how my failover & load balancing will happen using SCAN & Newly Created Listeners ???
Thanks in advance..
Regards,
Manish

Hi,
I tried on 11gR2 TEST RAC Server to have different listener with different port (1529) for SCAN & Node Listener & tested failover, load-balancing which was successful.
[oracle@ravish5 admin]$ cat listener.ora
LISTENER_A=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_A=ON # line added by Agent
[oracle@ravish5 admin]$ ps -ef | grep lsnr
oracle 1985 1 0 00:46 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER -inherit
oracle 1988 1 0 00:46 ? 00:00:00 /11g_database/11.2.0.2/product/home_1/bin/tnslsnr LISTENER_A -inherit
oracle 2928 1 0 01:00 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER_SCAN1 -inherit
[oracle@ravish5 admin]$ lsnrctl status LISTENER_A
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 02-MAY-2012 03:19:35
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))
STATUS of the LISTENER
Alias LISTENER_A
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-MAY-2012 00:46:42
Uptime 0 days 2 hr. 32 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /11g_database/11.2.0.2/product/home_1/network/admin/listener.ora
Listener Log File /11g_database/11.2.0.2/diag/tnslsnr/ravish5/listener_a/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_A)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.5)(PORT=1529)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.16)(PORT=1529)))
Services Summary...
Service "TEST" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "TESTXDB" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "srvc_test.clover.com" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> show parameter listen
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=192.
168.3.16)(PORT=1529))))
remote_listener string ravish-scan:1529
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
[oracle@ravish5 admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521,1529
[oracle@ravish5 admin]$ srvctl config scan
SCAN name: ravish-scan, Network: 1/192.168.3.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /ravish-scan.clover.com/192.168.3.22
[oracle@ravish5 admin]$ srvctl config listener
Name: LISTENER
Network: 1, Owner: oracle
Home: <CRS home>
End points: TCP:1521
Name: LISTENER_A
Network: 1, Owner: oracle
Home: /11g_database/11.2.0.2/product/home_1
End points: TCP:1529
[oracle@ravish5 admin]$ srvctl config service -d TEST -s srvc_test.clover.com
Service name: srvc_test.clover.com
Service is enabled
Server pool: TEST_srvc_test.clover.com
Cardinality: 2
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: true
Failover type: SELECT
Failover method: BASIC
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: TEST1,TEST2
Available instances:
TEST_NEW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ravish-scan.clover.com)(PORT = 1529))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = srvc_test.clover.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Actually different ports for different databases are required to have separation of duties. Once Firewall enabled betwen Client & DB Server only privileged users would have access to particular database.
Regards,
Manish

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

Different caption for each photo in web gallery

When you take your selected Photos from Library to WEB is it possible to have a different caption for each photo. If I select 1 photo from the import and change its caption using the caption popup in the "Image Info" pane all the image captions change even the unselected ones.
How can I change individual photos so that they will have individual captions in the web gallery?

You should change the caption metadata field in the Library module. Go to the Library module, select the image you want to change the caption on, in the right panel, scroll down to the metadata section. Make sure that the popup to the left of metadata is set to "default" and you should see the standard metadata. Simply type your caption here. Then, if you've done this for all your photos, go back to your web section and make sure you set the caption popup in the image info section back to "caption", which will use the info in the caption metadata field for each photo automatically.

Different formats for each line in enums & rings?

I don't know if this one is possible but I can't figure it out.
Can you make an enum or ring control have a different format for each selection?
E.G.:
Selection 1 [default]
Selection 2 [test mode]
Selection 3 [optional]
Selection 4 [optional]
I've tried the formatting options and property nodes, no luck. Maybe there are possibilities with control customizing I'm not thinking of???
Thanks & Regards,
K
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Hi K.
I don't think it's possible to have those text properties vary in a text-ring, but you might be able to accomplish your goal using a pict-ring - using images of formatted text. In the example (attached) Paint was used to create the pictures then import them into the pict-ring. Here Unclebump shows how to use "Draw Text at Point.vi" to create formatted text in a picture control, though, I have no idea how to copy such pictures out of the pictures control!
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
FormattedTextPicRing.vi ‏14 KB

Different responses for each wrong answer - possible?

Hello!
I'm a Captivate newbie and can't figure out how to set up my questions so that there is a different response for each incorrect answer. So rather than having just "incorrect, try again" (or something like that) when the learner makes a mistake, I can have phrases like "not quite right. The vertical axis should be slightly more inverted. Try again." and "Nope, not right. The horizontal axis has too high a slope." which would appear depending on which incorrect answer the learner chose. Hope this makes sense.
Can anyone help? Thanks!!

You can do that for single answer choice type of questions.
Double-click the option, select the Advanced Answer check box and Show Feedback Message check box from the Advanced Actions accordion of Properties. You will now get a new text box where you can add the feedback for that option.
See the screenshot for reference.
Sreekanth

Different screensaver for each display?

I'm pretty sure OS X out of the box doesn't do this, but has anyone found a way to designate a different screensaver for each display, or more specifically, only have the screensaver happen on one display, while the second display goes to sleep?
Thanks!

Hi Nari,
I guess that's not possible. From Web Dynpro side, dropdown is only one UI element. So different tooltip cannot be assigned.
However, You can find the which dropdown item is selected and assign the tooltip at runtime accordingly.
In wdDoModifyView method, you can assign the tooltip text.
if(!firstTime){
IWDDropDownByIndex drp = (IWDDropDownByIndex)view.getElement("DropDownByIndex");
drp.setTooltip(wdContext.currentNODEelement().getATTRIBUTE());
Regards,
Anand G

Different link for each cell on table item

hello..,
I have one table item on my WAD template.
I created Characteristic Structure/Selection for rows and Key Figure Structure/Selection for columns.
There is a requirement to jump to different report for each cell on that table.
Is it possible?
I try to created class "ZCL_MYCLASS" with superclass of "CL_RSR_WWW_MODIFY_TABLE".
And put some code on HTML as below:
<P><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TABLE"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER"/>
         <param name="MODIFY_CLASS" value="ZCL_MYCLASS"/>
         ITEM:            TABLE
</object></P>
For testing purpose, I put coding on CHARACTERISTIC_CELL method:
if I_CHAVL = 'Revenue'. "This is selection description
c_cell_content = 'R_e_v_e_n_u_e'.
endif.
But, it seems that it doesn't work.
The question:
1. How do I create simple MODIFY_CLASS, just for testing purpose that what I modify in class is already correct.
2. How to debug class on WAD?
Thanks in advance

Not statically, but you can do this in code:
That's a method on the left and a property on the right.
I don't know if this will work as you expect (it should change the tip strip, but I don't know if it will appear like you want it to), so you can also implement this yourself by having a string indicator which you show and move around using its properties.
Try to take over the world!

In Cover Flow, a compilation album shows different covers for each song. How do I make it show one cover for the whole album?

In Cover Flow, a compilation album shows different covers for each song. How do I make it show one cover for the whole album?

Also in the first page of Get Info for all tracks set the Album Artist to be Various Artists.
If you select all the tracks and right click to get info then you can do all the tracks in one go

I have 3 iphones, an ipod touch and an Ipad on the same itunes account. should I have a different account for each device? If so how do I get all my purchases, like music on all the devices?

I have 3 iphones, an ipod touch and an Ipad on the same itunes account. should I have a different account for each device? If so how do I get all my purchases, like music on all the devices?

You can sync as many devices as you want to the same iTunes account, there is no limit. You can have the same content on each device or different content, the choice is yours. iTunes will keep everything straight, by device, including separate backups. I'd suggest giving each device a unique name, to make things easier.

How to use the different class for each screen as well as function.

Hi Experts,
How to use the different class for each screen as well as function.
With BestRegards,
M.Thippa Reddy.

Hi ThippaReddy,
see this sample code
Public Class ClsMenInBlack
#Region "Declarations"
    'Class objects
    'UI and Di objects
    Dim objForm As SAPbouiCOM.Form
    'Variables
    Dim strQuery As String
#End Region
#Region "Methods"
    Private Function GeRate() As Double
            Return Double
    End Function
#End Region
Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
        If pVal.BeforeAction = True Then
            If pVal.MenuUID = "ENV_Menu_MIB" Then
            End If
        Else ' Before Action False
            End If
    End Sub
#End Region
End Class
End Class
Rgds
Micheal
Vasu Anna Regional Feeling a???? Just Kidding
Edited by: micheal willis on Jul 27, 2009 5:49 PM
Edited by: micheal willis on Jul 27, 2009 5:50 PM

How to set up different realms for each server ?

I am using weblogic 6 sp1.I have a domain with several servers. i want to assoicate or use different custom security realm for each server.However -on weblogic console- there is no 'Target' tab in the Security node ,and no way to set up multiple Security nodes.How ca i do this (or can i)?

Main reason why is this:
Imagine situation I have 2 servers A and B both of them bellongs to domain SomeDomain.
Server A is as WebServer and server B hosts all EJBs. And server A is outside
firewall (does not have DB access). But i would like to use RDBMS realm so what
to do in this situation. Place both servers in different domains and in server
A install proxy realm for RDBS realm ?
"Tom Moreau" <[email protected]> wrote:
>
You can't have a different realm for each
server. There is only one realm for all
servers - think of it as there is only
one set of authentication & authorization
information (that is users/groups/permissions)
and it applies to all servers.
Why do you want each server to have its
own realm? If someone tries to log in,
do you want WLS to automatically route
them to a server who is capable of logging
them in? I'm having trouble understanding
why you want this feature.
Thanks,
-Tom Moreau
Rachel <[email protected]> wrote:
I am using weblogic 6 sp1.I have a domain with several servers. i want
to assoicate or use different custom security realm for each server.However
-on weblogic console- there is no 'Target' tab in the Security node
,and no way to set up multiple Security nodes.How ca i do this (or can
i)?

Different chart for each level hierarchy in report designer

Is there a way to display a different chart for each level of the hierarchy in a report designer? I want a different chart for each level. That is, if there are 5 nodes in level 4, I want 5 different nodes. Is there a way to do this? I tried to insert the chart inside a cell in each level, but it shows the same chart for all nodes instead of a different chart for each node.

Has any one tried using a context sensitive chart? According to this, it seems like this should be possible, but I am having no luck.
http://help.sap.com/saphelp_nw70/helpdata/en/47/a99a0a5fdb0985e10000000a42189c/frameset.htm

Drop Down List in a table - different options for each row

How can i have a drop down list in a table with different options for each row?
My requirement is this.. I want to display, say employee dtails in a table, and one column is employee hobbies, whcih can have multiple values and each employee may have a different list of hobbies. So how can we populate the drop down for each row, with different options?

Hey. Uh, this probably isn't the answer you were looking for, but it sounds like you've got a problem with your database design there. Generally speaking, your tables shouldn't have multi-valued fields, in the relational model anyway (sql). Instead, you should look at adding a separate table like EMPLOYEE_HOBBIES. Then you have a foreign key using the employees primary key as the foreign key in the employee_hobbies table, see what I mean? I might have misunderstood your explanation though, I'm not sure.
Alternatively, you could just have hobbies as a big freeform varchar field, and don't bother to make people separate their hobbies into different fields (you'd have to abandon the drop-down listbox idea in this case). If there's no really important reason to make the distinction, then it's probably easier just to not do it.

Select different style for each border of a rectangle

Similar Messages

Maybe you are looking for