Select multiple row in a table that are not connected

I want to be able to select multiple rows, but want to be able to select rows that are not next to each other. They maybe have one or two rows between. Is there anyway to do this in a table?
Thanks

So do a lot of other people, but you can’t.
Tell Adobe here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Bob

Similar Messages

Select multiple rows from dual table

Is it possible to select multiple rows from dual table using a single select statement.
i.e., i want the out put to be
column_name
1
2
3
4
Edited by: vidya.ramachandra on Dec 14, 2009 8:24 AM

Aside from the fact you're responding to an old thread...
1002424 wrote:
While using CONNECT BY, I see it always leave behind one row.
Suppose I have a condition based on which I have to generate constant rows like
SELECT 1 FROM DUAL WHERE ROWNUM < N;
Here if N = 0, still it gives out single row.... you are obviously doing something wrong in your code elsewhere, because that SQL statement does not always return a single row...
SQL> SELECT 1 FROM DUAL WHERE ROWNUM < 0;
no rows selected
SQL>

Selecting multiple rows in a table

Hi All,
I have one problem with selecting multiple rows in a table.I tried with setting table property-selectionMode as Multi, but i dinn't get the solution.
please provide me solution for this.
Thanks & Regards,
Sreelakshmi.

HI
Int leadSelection = wdcontext.nodemodelnode.getLeadSelection();
for(int i=0;i<wdcontext.nodeModelNode.size;i++)
    if(wdcontext.nodeModelNode.isMultiselected(i) || leadSelection ==i)
           String name = wdcontext.nodemodelnode.getnameelementatindex(i).getName();
           String address = wdcontext.nodemodelnode.getaddresselementatindex(i).getAddress();
           String age = wdcontext.nodemodelnode.getAgeelementatindex(i).getAge();
        Create a method for the Table Property onLeadSelect() where you can open a popup window
         Create a value node and with attributes same as Table attributes and then set the values of the table
         to the value node attributes.
Thanks

Selecting multiple rows of a table

Hi Forum,
How to select multiple rows of a table at a time? Please help me..
Thanks
Swapna

Hi Swapna,
To select more then one row in table, just set the selectionmode property of table to 'multi' or 'auto' and also change the selection property of the node (to which table is binded) to 0:n.
I hope it helps.
Regards
Arjun
Edited by: Arjun on Feb 4, 2009 11:52 AM

Select Multiple Rows in a Table without CTRL

Expecting the user to press "Ctrl" when selecting multple rows is very unfriendly and unintuitive. We'd like the row selection to work as in ALV where you just select multiple rows by clicking on them.
We've set the tables rowSelectable to true and selectionMode to 'multi' but we still cannot select multiple rows without the CTRL hotkey.
This issue apparently [arose before|About selection in the table] but wasn't resolved.
System Details
SAP_ABA     701     0006     SAPKA70106
SAP_BASIS     701     0006     SAPKB70106
SAP_AP     700     0019     SAPKNA7019

Hello Marc,
you need to call IF_WD_CONTEXT_NODE->set_selected(index = lv_index) sorry for the typo in my previous comment.
by calling IF_WD_CONTEXT_NODE->set_selected method wont remove the lead selection.
to unselect the records, you can call the same method by passing the FLAG value as abap_false.
so for your usecase the logic will be like this in the ON_SELECT event handler
1. get the index of the new_lead_selection
2. check whether this is already seleted in the context node by calling IF_WD_CONTEXT_NODE->IS_selected
3. if already selected then call IF_WD_CONTEXT_NODE->set_selected( flag = abap_false index = lv_index)
   if not selected then call IF_WD_CONTEXT_NODE->set_selected( index = lv_index )
Hope this solved your problem.
BR, Saravanan
Edited by: Saraa_n on Jul 6, 2011 11:52 AM

IlleagalAurgumentException while selecting multiple rows in a table

hi
i am facing the problem with the adfTable selection.when i select more number of rows or selecting the rows fastly some time key set becomes null and also giving IlleagalAurgument Exception. i am giving the code i am using below
List tableData=(List)table1.getValue();
Iterator it=table1.getSelectedRowKeys().iterator();
while(it.hasNext()) {
Integer keyStr =(Integer) it.next();
System.out.println(" selected key ===="+keyStr);
if(keyStr!=null)
selectedList.add((FinalCurriculumStrands)tableData.get(keyStr));
keystr should not become null when there are selected rows.but it is coming as null.because keystr is null i am unable recover selected rows.please give me the solution.

duplicate: af:adfTable Selection issue

Records in a table that are not older than two weeks

Hey everyone,
I have a mysql table which has a column DATE which contains the date the enty was inserted
I need to write a script which keeps only those records that are no older than two weeks.
Can this be done in sql?
I can do it in Java but I guess this is not the most efficient way.
I use jsp and servlets in my app.

I just tried out the above code:
DELETE FROM myTableHere WHERE DATE_SUB(CURDATE(),INTERVAL 14 DAY) <= DATE;This is the error that I got:
mysql> DELETE FROM myTableHere WHERE DATE_SUB(CURDATE(),INTERVAL 14 DAY) <= DATE;
ERROR 1054 (42S22): Unknown column 'DATE' in 'where clause'
mysql>
my sql table has the currentDate column which specifies the current date and time when this entry was inserted into the DB. To get current date and time I use 'now()' function of sql.
what is the problem?
Thanks.

How do you setup a server to use multiple DNS servers that are not connect to each other?

Is there a way to setup a server that connects to two different domains to use the proper DNS server for name resolution?
Let say there are two DCs: serverA.subdomaina.domain.com and serverB.subdoamainb.domain.com. The domains are independent and not connected. Now you need a common server that is connected to both and need to resolve names from both
domains.
Is this possible?
I have setup a server in a workgroup. One NIC has the subdomaina.domain.com connection specific suffix and the other nic has the subdomainb.domain.com. Each NIC has the DNS server listed for the domain it is connected to.
This configuration will resolve FQDNs of one domain but not the other. This I believe is due to the fact the server only querys one DNS server and doesn't try the other DNS server.
Is there any way to make the server try another DNS server, if the first one doesn't have the entry?

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

HT2275 Do I need to choose "Share this printer on the network" for printers that are not connected directly to my MacBook Pro? I have two HP printers connected to an Airport Extreme (WiFi turned off). I connect by WiFi to another Airport Extreme w cable t

I have three Airport Extreme (AE) routers in my home network.
The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
What should I do?
For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
FYI
HP LaserJet Firmware Update Utility for HP P2035n is available
Version: 20120105 (19 Mar 2012)
Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>

Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
I'm assuming that you are asking about an Ethernet switch here, correct? The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
Post back if you need any tips to get things setup.

Reg Selection of Multiple Rows in a Table

Hi all,
I have to select multiple rows from a table and have to display those selected records in another table in the next screen.
The problem is, when I am selecting the records in a table, selection should not be allowed on some records based on a condition. Is it possible with the default selection mode of webdynpro. If so, Please tell me how can we disable the selection of certain records in a table(using the default selection mode provided by webdynpro)
Else, if we have to use check boxes for selection(in case of my problem), please do help me out in how to disable the selection of certain records in a table(using check boxes for selection).
Please help me out. Its urgent...
Reward points guranteed.
Regards,
Murthy.

HI Narayana,
Multiple selection property is specific to a table, not for a tableElment(ie. for a row), so u cant set some of the rows as multi selected and some as node
U can use Checkbox for this purpose. Based on the condition u can make the check box as enabled and disabled
To achieve this, Create 2 boolean variables inside table node, one for checkbox value(Let it be <b>CBValue</b> .Bind this to checked property of Checkbox) and other for enabling and disabling Checkbox(Let it be <b>CBReadOnly</b>. Bind this to readonly property of CheckBox).
At the time of creation of table elements, as per the condition, u can control the selection as
IPrivate<View>.I<Table>Node tNode=wdContext.node<Table>();
for(int i=0;i<5;i++)
IPrivate<View>.I<Table>Element tEl=tNode.create<Table>Element();
tNode.addElement(tEl);
tEl.setCBValue(false);//Unchecking Checkboxes initially
if(condition=non selectable)
tEl.setCBReadOnly(true);
else
tEl.setCBReadOnly(false)
Regards
Fahad Hamsa

Programmatically select multiple rows in DataGrid

Hello,
I'm trying to do it for days. How can i select many rows in my DataGrid in the code. In my DataGrid i have rows responsible for folders and files - existing in these folders. When user selects folder row i want to select all rows responsible for files that
are in that folder. Of course i know which rows should be selected, but the problem is how to do it? I can add that my DataGrid is Binded to ObservableCollection(containing strings with pathes to different directories and files. Please some help.

Hi Josef,
I am marking this issue as "Answered". If you have any new questions or concerns about this issue, please feel free to let me know.
Thank you and have a nice day!
Min Zhu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to select multiple row of table using check box?

hi,
         i am having table on view having first field as checkbox. what i want, when i click on checkboxes in multiple rows, and i click on any button i need to use those content to next view...
          my problem is if i select only one row , i can use onlead select property of table..but when i select multiple rows through check box how should i read contents of table....?
Plz solve it.
Thanks,
Saurin Shah

Hello Saurin,
You are right using LeadSelection you can select only 1 row at a time. You will have to make use of Selection for achieving this. First you will have to change the selection mode of the table to multiple & also change the selection property for the related context to 0..n . Please find a code extract which might help you. (However this facility is only available from SP 14.) The main part is using the set_selected method of if_wd_context_node.
data: node_zcourse_details type ref to if_wd_context_node,
         node_course_assign type ref to if_wd_context_node,
         elem_course_assign type ref to if_wd_context_element,
         stru_course_assign type if_v_details=>element_course_assign ,
         item_popin_selected like stru_course_assign-popin_selected.
"     navigate from <CONTEXT> to <ZCOURSE_DETAILS> via lead selection
node_zcourse_details = wd_context->get_child_node( name = if_v_details=>wdctx_zcourse_details ).
"     navigate from <ZCOURSE_DETAILS> to <COURSE_ASSIGN> via lead selection
node_course_assign = node_zcourse_details->get_child_node( name = if_v_details=>wdctx_course_assign ).
"     @TODO handle not set lead selection
if ( node_course_assign is initial ).
exit.
endif.
data elem_set type wdr_context_element_set.
field-symbols <wa_elem> like line of elem_set.
elem_set = node_course_assign->get_elements( ).
loop at elem_set assigning <wa_elem>.
   <wa_elem>->set_selected( TRUE OR FALSE ). " Supply either TRUE/FALSE in here
endloop.

Updating multiple rows in a table in ADF

Hi
How do we update multiple rows in a table.
Onclicking a update button the changed rows must be updated.

Hi Prince,
currently I am selecting one row from the table and rendering a region at the top of the table and capturing the user entered data with the following code:
ViewObjectVOImpl vo = getViewObjectVO1();
Row CurrentRow = vo.getCurrentRow();
//After this I perform the checks like user entered value is not null or check input as per business logic.
if(CurrentRow.getAttribute("attributeName") ==null){
//Add what message you want to display
//Add other business logic.
After making all the checks, i commit it.
getOADBTransaction().commit();
Now in my new page I am capturing the user input in the table itself like an excel sheet. Suppose there are ten rows in my advanced table on my page, and each row has one editable field. I have one save button at the bottom of the table.
Now on clicking the save button I have to capture the user input, check whether there is any null value and if all the entered data is correct then only I should commit it.
Can you please let me know how we can accomplish that.
Regards
Hawker

Selecting multiple rows in ALV

Hi Experts,
I am using REUSE_ALV_GRID_DISPLAY FM in my program for my ALV output . I need to select multiple rows and will click a custom button on the appln toolbar. How can I know which all rows are selected? Please help.
Many Thanks,
Neeraj

Hi,
Try this way.
<font color=blue><pre>
REPORT ztest_alv_row_selection.
DATA: BEGIN OF it_output OCCURS 0,
        select TYPE c,          <font color=red>"This variable stores the value when row selected.</font>
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_output.
TYPE-POOLS:slis.
DATA:it_events            TYPE STANDARD TABLE OF slis_alv_event,
     it_fieldcat          TYPE STANDARD TABLE OF slis_fieldcat_alv,
     wa_fieldcat          TYPE slis_fieldcat_alv,
     wa_events            TYPE slis_alv_event,
     wa_layout            TYPE slis_layout_alv.
DATA:g_program            TYPE sy-repid VALUE sy-repid.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_output UP TO 100 ROWS.
DEFINE fieldcatalog.
    wa_fieldcat-fieldname = &1.
    wa_fieldcat-tabname   = &2.
    wa_fieldcat-seltext_l = &3.
    append wa_fieldcat to it_fieldcat.
    clear wa_fieldcat.
END-OF-DEFINITION.
fieldcatalog: "Column table       col text
                'BUKRS' 'IT_OUTPUT' 'BUKRS',
                'BUTXT' 'IT_OUTPUT' 'BUTXT'.
wa_layout-box_fieldname     = 'SELECT'. <font color=red> "This has to be set to get selection</font>
wa_layout-colwidth_optimize = 'X'.
wa_events-name              = 'PF_STATUS_SET'.
wa_events-form              = 'PF_STATUS_SET'.
APPEND wa_events TO it_events.
CLEAR wa_events.
wa_events-name              = 'USER_COMMAND'.
wa_events-form              = 'USER_COMMAND'.
APPEND wa_events TO it_events.
CLEAR wa_events.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = g_program
      is_layout          = wa_layout
      it_fieldcat        = it_fieldcat
      it_events          = it_events
    TABLES
      t_outtab           = it_output.
*&      Form PF_STATUS_SET
FORM pf_status_set USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTEST'.
1. When you set Pf status ZTEST, standard application tools will be removed.
2. Goto SE41 give program 'SAPLKKBL' and status 'STANDARD_FULLSCREEN'.
3. Copy the status from those to ZTEST of our program. Now you will see all standard functions.
ENDFORM.                    "PF_STATUS_SET
      FORM USER_COMMAND                                          *
FORM user_command USING r_ucomm LIKE sy-ucomm rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
    WHEN 'DISPLAY'. "user presses SAVE
      LOOP AT it_output.
        IF it_output-select EQ 'X'.
      Process records that have been selected
          WRITE:/ it_output.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.                    "user_command</pre></font>
Thanks
Venkat.O

Updating data from multiple rows in a table view

Hello,
so far in my OAF programming, I have always selected one particular row from a table and saved from it. Now I have a requirement where in my table, fields from more than one row shall have to be updated.
Can anyone please let me know how to accomplish this.
Regards
Hawker

Hi Prince,
currently I am selecting one row from the table and rendering a region at the top of the table and capturing the user entered data with the following code:
ViewObjectVOImpl vo = getViewObjectVO1();
Row CurrentRow = vo.getCurrentRow();
//After this I perform the checks like user entered value is not null or check input as per business logic.
if(CurrentRow.getAttribute("attributeName") ==null){
//Add what message you want to display
//Add other business logic.
After making all the checks, i commit it.
getOADBTransaction().commit();
Now in my new page I am capturing the user input in the table itself like an excel sheet. Suppose there are ten rows in my advanced table on my page, and each row has one editable field. I have one save button at the bottom of the table.
Now on clicking the save button I have to capture the user input, check whether there is any null value and if all the entered data is correct then only I should commit it.
Can you please let me know how we can accomplish that.
Regards
Hawker

Select multiple row in a table that are not connected

Similar Messages

Maybe you are looking for