Select-options in tabstrip subscreen

Hello
I am developing a report in which i have the following components,
Report first calls a main screen 100 which will display a Tabstrip.The first tab in the tabstrip has a subscreen 111 to display the selection screen.
Now i need to have select-options in this subscreen 111. I think the only way to have the select-options is by programming a selection-screen with screen number 222 and call this in the subscreen 111.
I am able to see the select-options, But the issue is, the value of the select-options are not getting passed to the program.They seem to be blank.
Did i miss any step or is anything wrong? Your help please.
Thanks
Subha

Hi,
The issue in my case is the selection-screen is not called directly by a main screen in a report program. The selection-screen is present in a tabstrip control subscreen. So the flow is, report calls a main screen -> main screen contains tabstrip control -> first tab of tabstrip has a subscreen which should have select-options. Since select-options cannot be directly put using screen painter options, i need to use another subscreen. So how do i pass the value of this select-option to the main program?
Thanks
Subhashini

Similar Messages

Select-Options in Tabstrip and Subscreen for MIGO

Hi,
I have to enhance MIGO tansaction using screen exit.
I have to create a tab called Serial Number Ranges and inside the tab create a sub screen.
Inside the subscreen i have to create a range (select option for Serial Number.)
I have create a module pool program and created one screen with the tab and subscreen.
In the main program i have create a selection screen as subscreen and declared select options.
then i have called the screen in PBO and PAI..
it doesnt seem to work...
can u suggest a solution different from this?

Hi,
Check out these links:
[http://sample-code-abap.blogspot.com/2008/06/select-option-in-module-pool-screen.html]
[http://abap-explorer.blogspot.com/2008/08/create-select-options-in-module-pool.html]

Populate Select-Option in a subscreen

I've created a selection-screen as a subscreen and calling it inside the flow logic. It's working fine except that I can't pass any value to a select-options. When it's in a debug mode, I can see the values. But when I'm trying to insert some value to it in a module, the select-option (ex. s_matnr) is not recognized as if it does not exists. Please help.
Thanks.

Hi
Iam also having the same problem can briefly exaplain the solution .
i have scenairo like this :
In the Dialog program in the main scrren we are calling the subscreen in that subscreen we have one material number
for that number we need to add the mulltiple selection screen .
how should we can add these .
let me know yours soluion .
thanks

Chain-end_chain for a select-option in a subscreen

hi all, I have a program with a screen 0010 with some fields....one of this fields must have "multiple input" (as with select-options) so I´ve created a subscreen 0020 within this screen 0010 (it´s the only way I know to put select-options in a screen)
The problem is in screen 0010 I have a chain end_chain to check data in the custom fields:
CHAIN.
   FIELD zget_assigner-fipex.
   FIELD zget_assigner-ebeln.
   FIELD zget_assigner-belnr.
   MODULE check_fields. " ON CHAIN-REQUEST.
and in my screen 0020 i have other chain endchain to check the select-option....
CHAIN.
FIELD S_BNAME-LOW.
MODULE %_END_OF_SCREEN.
MODULE %_OK_CODE_1000.
module check_fields_0020.
ENDCHAIN.
the problem is when I enter data in the select-option and hit enter the program give me an error message saying I can´t use "set screen and leave screen in a subscreen" and the program finish....
if I don´t hit enter but press OK to continue the process....the chain end chain from 0020 give me a message saying the data is wrong (this is ok) but the select-option stay in display mode (chain endchain did this) and I can´t modify the data in the select-option...
What I need to do in order to get editable the select-option after the error messager from chain is showed????
Thanks in advance....
How can I check the data in the select-option S_BNAME is correct????

hi all, thanks for your kindly answers...
finally I fixed the problem using
"at selection-screen on s_bname" and a bit of new code in the module where I manage actions to do in base to the values of the sy-ucomm.....
so If the data in the select-option is wrong I show an error message in the "at selection-screen" and I call screen 0010 in my user_command_0010 where I checks the sy-ucomm values....
Thanks again.

SELECT-OPTIONS in Module Pool Sub-Screen

Hi,
I have been working on a Module-Pool Development, in the header portion of the Screen, I have provided a Selection-Screen as a Sub-Screen because the requirement specifies to display a SELECT-OPTION in the Header Area.
Now the problem is that, when working with the Screen, as soon as I press <ENTER> the Main Screen re-calls the Selection-Screen in the Sub-Screen area and all the entries made in the Selection-Screen are reset/erased.
Kindly provide a solution either to stop the <ENTER> action to re-call the sub-screen. Or on any alternate method(s) to provide a SELECT-OPTION on a Module Pool based Screen UI.
MAIN SCREEN Code:
* PROCESS BEFORE OUTPUT
PROCESS BEFORE OUTPUT.
*~ Set PF-STATUS and TiTLE for Screen 100
MODULE status_0100.
*~ Call the Subscreen Dynamically
CALL SUBSCREEN subscr1 INCLUDING sy-cprog gv_dynnr1.
CALL SUBSCREEN subscr2 INCLUDING sy-cprog gv_dynnr2.
* PROCESS AFTER INPUT
PROCESS AFTER INPUT.
*~ Handle the Exit Commands of Screen 100
MODULE user_command_0100 AT EXIT-COMMAND.
*~ Handle the User Command(s) for screen 100
MODULE user_action_0100.
CALL SUBSCREEN subscr1.
CALL SUBSCREEN subscr2.
So whenever <ENTER> is pressed, the PBO re-calls:
CALL SUBSCREEN subscr1 INCLUDING sy-cprog gv_dynnr1.
and the Selection-Screen is reset.
Regards,
Nishant Nayyar.

Haii Nishant,
This problem was earlier solved by one of the members and after going through it i have now created a select-option in the Subscreen. Just create two input fields, name them as if they were low and high (for convinience as in case of select-option).
U now need to create a table of type rstabfield.
Ex: gt_rstab_bukrs type rstabfield.
Now create a button and assign a Fcode for it. When you click on this button then u need to implement the ranges functionality as in select-option. For that use the following function module:
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE                   = ' '
   TEXT                    = ''
   SIGNED                  = 'X'
   SEARCH_HELP             = 'H_T001'
   TAB_AND_FIELD           = gt_rstab_bukrs
TABLES
    RANGE                   = rg_bukrs1.
Hope it helps.
Best Regards,
rama

Multiple Select option in Module pool

Hi,
I wanna add a field for 'Delivery number' in the screen of a mod pool prgm.I created a subscreen area in the main screen and did the coding needed.now the problem i am having is if i giv a single value in the from field or values in the 'From' and 'To' field its not taken to the program,i saw it while debugging. but if i enter the values in the multiple selection option its taken to the program.That means from screen its not going to the program where as from the multiple select option its taken to the program,What may be the propblem.
Regards in Advance,
Nitin

Hi,
Have you used the select-options in the subscreen or you have placed the multiple option manually?
Either way, please check the two methods, it may solve your problem.
Create a SELECT-OPTIONS in module pool screen using two methods as shown.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
    select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program>   <screen>
This CALL SUBSCREEN statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING*
TITLE                        = ' '
text                          = g_titl1   " 'Customers'
tab_and_field             = struc_tab_and_field
TABLES
RANGE                     = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB       = 1
CANCELLED              = 2
INTERNAL_ERROR     = 3
INVALID_FIELDNAME = 4
OTHERS                       = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Regards

Select-Options on a Tabstrip Subscreen on a REAL Dynpro

Hello,
i ve the following problem:
I have a Report with a normal selection-screen and a call screen 100 after that.
That Dynpro 100 itself is a Tabstrip-Control. And on one of the Tabs i need to place some Select-options fields ( and a pushbutton + an alv, which shows the result of the selection, but thats not a problem).
The Problem i think is, that a Tab itself is a subscreen. not a "real" dynpro. i tried to place a subscreen control on that tab ( subscreen in a subscreen dynpro ) and define a selection screen as subscreen. but it s not being displayed.
selection-screen begin of screen 0888 as subscreen.
selection-screen begin of block s01 with frame title text-s01.
select-options: s_mrbe for eedmsettlunit-settlunit.
selection-screen end of block s01.
selection-screen end   of screen 0888.
in dynpro logic:
PROCESS BEFORE OUTPUT.
MODULE status_0222.
CALL SUBSCREEN:
    subscreen5 INCLUDING sy-repid '0888'.
PROCESS AFTER INPUT.
MODULE user_command_0222.
    call SUBSCREEN subscreen5.
maybe you can help
Moderator message : Duplicate post locked. Continue with the thread - [Select-Options on a Tabstrip Subscreen on a REAL Dynpro|Select-Options on a Tabstrip Subscreen on a REAL Dynpro;.
Edited by: Vinod Kumar on Jun 15, 2011 2:02 PM

Hello,
Your problem is to show a subscreen selection-screen on another subscreen, right?
It works for me:
1. Copy DEMO_DYNPRO_TABSTRIP_LOCAL report.
2. Add your own subscreen selection-screen:
SELECTION-SCREEN BEGIN OF SCREEN 9001 AS SUBSCREEN.
.. SELECT-OPTIONS: p_sel FOR ok_code.
SELECTION-SCREEN END OF SCREEN 9001.
3. Call your subscreen 9001 on screen 100
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN: SUB1 INCLUDING SY-REPID '9001', "<---
                  SUB2 INCLUDING SY-REPID '0120',
                  SUB3 INCLUDING SY-REPID '0130'.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN: SUB1,
                  SUB2,
                  SUB3.
MODULE USER_COMMAND.

Reusing select option in different tabstrips of same view

Hi Experts,
I have a view. In this i have two tabstrips namely tab1 and tab2.
I have created one select option and i am using it twice inside (two fields- one for date and one for register no.) one view controller of tab1.
Now is it possible to use the same select option twice inside tab2. Note that here i have to create another view controller for tab2.
Can u plz explain in details.
Thanks in advance

Hi,
When you create the 2 viewcontainer Ui elements inside the 2tabs repsectively. Use the same instance of the Select options
in both tabs would throw the error that same instance of Selectoptions already exists.
You need to create the 2 select options instances, i mean Component usages to achieve the same.
Is this dynamic. I mean embeding view inside the view container of Window context is dynamic or static.
Regards,
Lekha.

Calling a selection screen in a subscreen of a tabstrip

hi,
I have created a tabstrip where i have included a subscreen.
I want to create and call a selection screen within that subscreen.
Can anybody tell me the steps required?
thanks in advance,
Abhishek

hi
good
try this
In the same way that you can define a screen as a subscreen in the Screen Painter, it is now possible to define selection screens as subscreens in an ABAP program:
SELECTION-SCREEN BEGIN OF SCREEN scrn AS SUBSCREEN
[NO INTERVALS]
[NESTING LEVEL n].
SELECTION-SCREEN END OF SCREEN scrn.
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
http://sap.niraj.tripod.com/id40.html
thanks
mrutyun^

Subscreen with Select-Options called from At Selection Screen event

Dear friends,
I'm trying to call a subscreen that contains a select-options, from an 'at selection screen' event, in a report program, but without sucess.
Here's go what I'm doing:
I declared a selection-screen as subscreen in my main program, and I'm calling it from a module-pool subscreen area, to make the module-pool select-options magic.
In my main report program, I have a customized status GUI with a new toolbar button and I'm handling it at the 'at selection screen' event.
What I need to do is to call the subscreen that contains the select-options when this new customized button get pressed, but when It happens, the select-option selections pop-up doesn't appear.
If I call the subscreen from the 'start-of-selection' event, it goes fine, just don't work from the 'at selection screen'.
Any ideas on how can I do it?
Thank you,
Heber

i think you should try something like this:
at selection screen.
if condition handled ....
show_popup = 'X'.
endif.
at selection screen output.
if show_popup EQ 'X.
call subscreen
endif.

Select-options in subscreen

Hi people!
I've got a subscreen with an I/O field and a subscreen. In that subscreen I load a select-option, but when I put data on the fields, I realize the I/O field keeps the data but my select-option is 0, there's no data on it. I'm sure the answer must be really simple but I can't find it and it's driving me nuts. Thanks in advance for your help.
Zigor.

Hello,
today i had the same problem with I/O fields. The solution is written in the SAP Help:
http://help.sap.com/saphelp_nw04s/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/frameset.htm
You also have to call the subscreen in the PAI of the Dynpro.
Call subscreen sub.
Greetings,
Bernhard

Selection OPTION: Date input problem in Module POOL through Subscreen

Dear ALL,
Being new to ABAP, I am struck in a Problem.
Requirement:
I want an option on the Screen( My Screen 9000) for Date Range. Through this Date-Range I want to filter and pull some data from
Database.
As Date Range Selection option is possible only through Sub-Screen integration. Hence I integrated a Sub-Screen 400 (as below) and named the Sub-Screen area as SEL on my screen.
Problem: As soon as I enter the dates on the screen, then those dates are not taken up by the code.
During debugging I saw the the S_datum-low and S_datum-high are empty (in fact 00000000)
The code follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_9000.
Call SUBSCREEN SEL INCLUDING sy-repid '400'.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_9000.
DATA: gv_datum     Type   dats,
SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
    SELECT-OPTIONS: s_datum FOR gv_datum.
SELECTION-SCREEN END OF SCREEN 400 .
Plz help where I am missing something.
Regards
Chandan

Call the subscreen during the AT SELECTION-SCREEN event.
SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
SELECT-OPTIONS: s_datum FOR gv_datum.
SELECTION-SCREEN END OF SCREEN 400 .
AT SELECTION-SCREEN.
   CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
   SET PF-STATUS '0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
   CASE sy-ucomm.
     WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
       LEAVE TO SCREEN 0.
   ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT

Mulitple selection with select option on subscreen

Hi colleagues,
   I've the following issue:
I'm programming a dynpro this dynpro contains two subscreens. The lower subscreen will contain another dynpro defined as subscreen with an ALV to display results.
The top subscreen (0150) area will be filled with a generated subscreen with the command
SELECTION-SCREEN BEGIN OF SCREEN 0150 AS SUBSCREEN.
with select options I define my selection area like:
SELECT-OPTIONS: sa_6 FOR gs_rp_attrib_sel-sonr.
   If I call my transaction starting up the dynpro containing the two subscreens the result looks quit how I expect it. BUT then I try to start up the multiply selection Pop-UP for the selection field by pressing the button just right behind the HIGH input field, nothing happens. The multiply selection pop-up basicly does not show up.
   Any clues what I need to add that it will show up?
   Does the mulitply selection not work with
SELECTION-SCREEN BEGIN OF SCREEN 0150 <b>AS SUBSCREEN</b>???
(If I do a simple test program with a selection screen not being a subscreen, the multiply select popup comes up.)

Hi,
A subscreen cannot call another screen.
I guess this is the reason why u are facing this problem.
Thanks,
Rashmi.

Select-option on subscreen for Module pool

Hi all,
I need to add some elements on standard screen of a standard transaction. Everything works fine, but the problem starts when I want to add select-option. It is displayed, but when I press on Multiple selection button no action occurs, no window appears...I simplified the case and created test program with test screen and also I get the same behaviour. Anyone had similiar problem?
Thnak you in advance for help,
Anna

I donot know how u have created the select-option. but u can try these 2 methods to create it. And I have checked that both of them work fine.
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
       SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
             select-options s_matnr for mara-matnr.
       SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
       CALL SUBCREEN sub_area INCLUDING <program>   <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
          EXPORTING
          TITLE                   = ' '
            text                         = g_titl1                                " 'Customers'
            tab_and_field     = struc_tab_and_field
          TABLES
            RANGE                   = rng_kunnr
          EXCEPTIONS
            NO_RANGE_TAB          = 1
            CANCELLED                    = 2
            INTERNAL_ERROR     = 3
            INVALID_FIELDNAME = 4
            OTHERS                           = 5.
IF NOT rng_kunnr[] IS INITIAL.
         Read the very first entry of the range table and pass it to
         dynpro screen field
           READ TABLE rng_kunnr INDEX 1.
           IF sy-subrc = 0.
              g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Regards,
Joy.

Setting screen attributes for select-option in subscreen

Hello SDN Community, I have researched this extensively in forums and found much helpful information in getting the select-option working in a subscreen. Also found information that discussed using standard AT SELECTION-SCREEN statements to process the sub-screen with.
I encountered problems when that from the LOOP AT SCREEN within the AT SELECTION-SCREEN OUTPUT, I set the INPUT/OUPUT attributes to zero, the field was still open for input when it displayed. For when I do this on other fields of my screen, they are "greyed out".
Has anyone any experience setting field attributes from within loop at screen for embedded select-option subscreen? Would appreciate any insight you might have.
Thank you,
Dean Atteberry.
P.S.- I put this thru the debugger and I can see the INPUT and OUTPUT attributes getting changed. But when displays, it is like the change didn't happen.
Full description of my processing below...
I have a screen with four radio-buttons. Under the first radio-button is my embedded subscreen with one SELECT-OPTION for AUFNR. Under the other three radio-buttons are single fields declared regular way in main screen.
In my PBO of main screen I have loop at screen that enables/disables INPUT and OUPTUT attributes based on which radio-button is selected. This prevents confusion from user entering values in fields other than the one the radio-button is selected for.
For my embedded select-option subscreen, I have an AT SELECTION-SCREEN OUTPUT statement in which I have a LOOP AT SCREEN. Within that, based on radio-buttons, I either enable or disable the INPUT and OUTPUT attributes for the S_AUFNR-LOW and S_AUFNR-HIGH fields.
Edited by: Dean Atteberry on Mar 25, 2009 4:39 PM

>> I think that you are trying to change select options within main screen, whereby it should be
>> changed in PBO of that subscreen. You said you do it in AT SELECTION-SCRREN OUTPUT which
>> will be only applicable for selection screen (I guess your main screen here). Do loop at screen in
>> PBO module of this subscreen not in PBO of the selection screen and see if that helps.
Hi Marcin, thank you for your reply. My "main screen" is not my "selection screen". Please allow me to further clarify...
My "main screen" has four radio buttons with a subscreen area under the first one and single fields under the others.
My "subscreen" is auto-generated by Selection-Screen and Select-Options statements which are in my TOP module.
I call my auto-generated select-option subscreen in my PBO with...
call subscreen sca_ordr including sy-repid scr_0121.
and in my PAI with...
call subscreen sca_ordr.
In order to do LOOP AT SCREEN for my system-generated select-option subscreen, I use the AT SELECTION-SCREEN OUTPUT event in which to put my loop.
When I walk thru this in the debugger, I can see it setting INPUT/OUTPUT fields to zero, but when the screen displays, there are no changes to my subscreen.... Fields should be "greyed out" instead they are open for intput.
Doing my best to accurately describe in as few words as possible. Thank you for your ideas!
Dean.

Select-options in tabstrip subscreen

Similar Messages

Maybe you are looking for