Select options no intervals - default value

Hi All,
I have the following statement for selection.
SELECT-OPTIONS : S_BUKRS FOR BSEG-BUKRS no intervals.
I have to default it with values 1000 and 1100. When I click the right arrow button next to the field, I should see 1000 and 1100.
Can someone please help me in implimenting it.
Thanks,
Veni.

Hi,
SELECT-OPTIONS : S_BUKRS FOR BSEG-BUKRS no intervals.
At selection-screen output.
S_BUKRS-low = '1000'.
S_BUKRS-sign = 'I'.
S_BUKRS-options = 'EQ'.
append s_bukrs.
S_BUKRS-low = '1100'.
S_BUKRS-sign = 'I'.
S_BUKRS-options = 'EQ'.
append s_bukrs.
Thanks,
Senthil

Similar Messages

Initializu00EDng select options field with default values and with NO INTERVALS

Dear All,
I have used WDR_SELECT_OPTIONS technology within WD Abap.
I also have added the fields which have to be taken into consideration.
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'PLANT' ).
wd_this->m_handler->add_selection_field(
i_id = 'PLANT'
it_result = lt_range_table
i_read_only = read_only ).
Can I assign two values to this field 'PLANT' whereby the user may take only these values.
I mean kind of pre initializíng of this select options field with default values.
Due to this handling it should be prevented that the user can give other values
except this values.
Additonally it should be fine whether it is possible to disable the second input field
of this select options field like NO INTERVALS .
Regard
sas
Regard
sas

wd_this->m_handler->add_selection_field(
i_id = 'PLANT'
it_result = lt_range_table
I_NO_INTERVALS = 'X'
i_read_only = read_only ).
Pls check 'WDR_TEST_SELECT_OPTIONS' web dynpro component

Field in the selection screen as a select option with two default values

Hi All,
can anybody tell me how to put field in the selection screen with two defaul values.
for ex: selection screen the Account Group KNA1-KTOKD as a select option. The defeault value should be Y001 and Y005.
please reply ASAP. Its urgent.
Thanks in advance,
Madhu

Hi Madhu,
Since Select options are nothing but ranges, you can use the following code to add two distinct values to the select options by default.
s_ktokd-sign = 'I'.
s_ktokd-option = 'EQ'.
s_ktokd-low = 'Y001'.
append s_ktokd.
s_ktokd-low = 'Y005'.
append s_ktokd.
clear s_ktokd.
However, if you want to mention a range like all the values between these given two values to be considered then u may use,
select-options : s_ktokd for KNA1-KTOKD default 'Y001' to 'Y005'.
or
s_ktokd-sign = 'I'.
s_ktokd-option = 'BT'.
s_ktokd-low = 'Y001'.
s_ktokd-high = 'Y005'.
append s_ktokd.
Reward if helpful.

F4 help for select options based on parameter value

hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM

hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM

Pass the results from a selection formula to the default values for a parameter field

Post Author: kevans
CA Forum: General
Crystal 10 u2013 SQL 2000
I want to create a parameter field that will display all of our IT Departments so the end user can select the one they want to run the report against, such as IT-Security, IT-Network, etc. about 40 in all. BUT I donu2019t want this to be a static list where I type in all 40 depts in the default list, I was hoping I could do something more dynamic such a formula field that says u201C if {group.name startswith u2018ITu2019 then {group.name}u201D and then have the parameter field pull from this source.
Iu2019m sure this has been answered in a previous post but Iu2019m not finding it. I see stuff on creating a record selection formula such as u2018if {?group} like u2018IT-Secur*u2019 thenu2026u201D but this leaves too much room for error if people donu2019t type the name correctly. Maybe Iu2019m not using the record selection formula correctly? Sorry if I offend anyone but I just upgraded from 8 to 10 and thought for sure this option would be in 10, perhaps built right into the parameter default value page where you can place in select criteria but NOTHING has changed.

Post Author: sharonmtowler
CA Forum: General
if you are creating the parameters in the rpt file, it will only pull values you enter, or directly from the database
in the record selection you can do something like this, so if they only enter the first 2 characters it should pick up only the IT etc.
(if eft(,2)={?parameter} then true else ={?parameter})

Disable the select-options dynamically based on value selected in listbox

Hi friends,
I have a peculiar problem in my program.
I have a list box with two values.
1) With Ref to Reservation No.
2) Production order.
I am doing the object for Transfer Posting ( Similar to MIGO).
The contents of the listbox here are acting as the label to my select-options.
I have two select-options in my program.
1) Reservation No (s_rsnum for rsnum)
2) Production Order (s_porder for aufnr)
In runtime, based on the label selected in the listbox, the corresponding select-option should be in visible mode.
for eg: if i select "With ref to Reservation No" S_rsnum should be enabled and vice-versa.

Hi,
here an example with listbox:
TABLES: MARA.
PARAMETERS: P0 DEFAULT 'KAUF' LIKE MARA-MTART AS LISTBOX VISIBLE LENGTH 8 USER-COMMAND DUMMY.
SELECTION-SCREEN: SKIP 3.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR MODIF ID DI1.
SELECTION-SCREEN: SKIP 3.
SELECT-OPTIONS: S_MATKL FOR MARA-MATKL MODIF ID DI2.
AT SELECTION-SCREEN OUTPUT.
IF P0 = 'KAUF'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 EQ 'DI1'.
        SCREEN-ACTIVE      = '1'.
        SCREEN-INPUT       = '1'.
        MODIFY SCREEN.
      ENDIF.
      IF SCREEN-GROUP1 EQ 'DI2'.
        SCREEN-ACTIVE      = '0'.
        SCREEN-INPUT       = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
IF P0 <> 'KAUF'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 EQ 'DI1'.
        SCREEN-ACTIVE      = '0'.
        SCREEN-INPUT       = '0'.
        MODIFY SCREEN.
      ENDIF.
      IF SCREEN-GROUP1 EQ 'DI2'.
        SCREEN-ACTIVE      = '1'.
        SCREEN-INPUT       = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
use your own listbox in If-Clauses.
Regards, Dieter

How to put "selection options without intervals" on screen painter?

Hello all,
       I need to put a field for pernr(personal number) on screen painter (module program) and user should be able to enter a list of pernr's to process. I know in report program I can do this by:
SELECT-OPTIONS: s_lpernr FOR pa001-pernr NO INTERVALS.
How can I get this work on sccreen painter in module programming? How can I add a field on screen painter with a range without intervals? Please let me know.
Thanks.
Mithun.

You can also do this using the function module COMPLEX_SELECTIONS_DIALOG.
REPORT ZTEST_SCREEN                            .
DATA : BEGIN OF IT_DYNPFIELDS OCCURS 3.
        INCLUDE STRUCTURE DYNPREAD.
DATA : END OF IT_DYNPFIELDS.
DATA: TEST(10) TYPE C.
RANGES: R_UNAME FOR SY-UNAME.
DATA:     V_USERNAME LIKE SY-UNAME.
DATA : V_PROG LIKE D020S-PROG VALUE 'ZTEST_SCREEN',
       V_DNUM LIKE D020S-DNUM VALUE '0100'.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'TEST'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module GET_CURSOR_USERNAME INPUT
*       text
MODULE GET_CURSOR_USERNAME INPUT.
REFRESH IT_DYNPFIELDS.
CLEAR   IT_DYNPFIELDS.
MOVE 'V_USERNAME' TO IT_DYNPFIELDS-FIELDNAME.
APPEND IT_DYNPFIELDS.
CLEAR   IT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      DYNAME               = V_PROG
      DYNUMB               = V_DNUM
      TRANSLATE_TO_UPPER   = 'X'
    TABLES
      DYNPFIELDS           = IT_DYNPFIELDS
    EXCEPTIONS
      INVALID_ABAPWORKAREA = 1
      INVALID_DYNPROFIELD = 2
      INVALID_DYNPRONAME   = 3
      INVALID_DYNPRONUMMER = 4
      INVALID_REQUEST      = 5
      NO_FIELDDESCRIPTION = 6
      INVALID_PARAMETER    = 7
      UNDEFIND_ERROR       = 8
      DOUBLE_CONVERSION    = 9
      STEPL_NOT_FOUND      = 10
      OTHERS               = 11.
IF SY-SUBRC EQ 0.
    READ TABLE IT_DYNPFIELDS WITH KEY FIELDNAME = 'V_USERNAME'.
    IF SY-SUBRC = 0.
      V_USERNAME = IT_DYNPFIELDS-FIELDVALUE.
    ENDIF.
ENDIF.
PERFORM GET_MULTIPLE.
ENDMODULE.                 " GET_CURSOR_USERNAME INPUT
*&      Form GET_MULTIPLE
*       text
* --> p1        text
* <-- p2        text
FORM GET_MULTIPLE .
* Dynamically holding Field name
FIELD-SYMBOLS: <FST> TYPE STANDARD TABLE.
IF R_UNAME[] IS INITIAL.
    IF NOT V_USERNAME IS INITIAL.
      R_UNAME-SIGN = 'I'.
      R_UNAME-OPTION = 'EQ'.
      R_UNAME-LOW = V_USERNAME.
      APPEND R_UNAME.
      CLEAR R_UNAME.
    ENDIF.
ENDIF.
ASSIGN R_UNAME[] TO <FST>.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
    EXPORTING
      TITLE             = 'Select Multiple Value'(059)
      TEXT              = 'Finish Group'(058)
      SIGNED            = 'X'
      LOWER_CASE        = ' '
      NO_INTERVAL_CHECK = 'X'
      JUST_DISPLAY      = ' '
      JUST_INCL         = 'X'
    TABLES
      RANGE             = <FST>
    EXCEPTIONS
      NO_RANGE_TAB      = 1
      CANCELLED         = 2
      INTERNAL_ERROR    = 3
      OTHERS            = 4.
IF SY-SUBRC EQ 0.
    READ TABLE R_UNAME INDEX 1.
    IF SY-SUBRC = 0.
      V_USERNAME = R_UNAME-LOW.
    ENDIF.
ENDIF.
ENDFORM.                    " GET_MULTIPLE

Select-Options NO INTERVALS

I am using the NO INTERVALS addition for a select-options. When I use this addition, the user is still unfortunately allowed to enter a range after they select the drop down. Is there any way to exclude the tabs other than the Single Values tab in the select options dialog box? Your response is greatly anticipated.
Kind Regards,
Jason

REPORT TESTREP.
* Include type pool SSCR
TYPE-POOLS SSCR.
* Define the object to be passed to the RESTRICTION parameter
DATA RESTRICT TYPE SSCR_RESTRICT.
* Auxiliary objects for filling RESTRICT
DATA OPT_LIST TYPE SSCR_OPT_LIST.
DATA ***      TYPE SSCR_***.
* Define the selection screen objects
* First block: 3 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK BLOCK_0 WITH FRAME TITLE TEXT-BL0.
SELECT-OPTIONS SEL_0_0 FOR SY-TVAR0.
SELECT-OPTIONS SEL_0_1 FOR SY-TVAR1.
SELECT-OPTIONS SEL_0_2 FOR SY-TVAR2.
SELECT-OPTIONS SEL_0_3 FOR SY-TVAR3.
SELECTION-SCREEN END   OF BLOCK BLOCK_0.
* Second block: 2 SELECT-OPTIONS
SELECTION-SCREEN BEGIN OF BLOCK BLOCK_1 WITH FRAME TITLE TEXT-BL1.
SELECT-OPTIONS SEL_1_0 FOR SY-SUBRC.
SELECT-OPTIONS SEL_1_1 FOR SY-REPID.
SELECTION-SCREEN END   OF BLOCK BLOCK_1.
INITIALIZATION.
* Define the option list
* ALL: All options allowed
MOVE 'ALL'        TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-BT,
               OPT_LIST-OPTIONS-CP,
               OPT_LIST-OPTIONS-EQ,
               OPT_LIST-OPTIONS-GE,
               OPT_LIST-OPTIONS-GT,
               OPT_LIST-OPTIONS-LE,
               OPT_LIST-OPTIONS-LT,
               OPT_LIST-OPTIONS-NB,
               OPT_LIST-OPTIONS-NE,
               OPT_LIST-OPTIONS-NP.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* NOPATTERN: CP and NP not allowed
CLEAR OPT_LIST.
MOVE 'NOPATTERN' TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-BT,
               OPT_LIST-OPTIONS-EQ,
               OPT_LIST-OPTIONS-GE,
               OPT_LIST-OPTIONS-GT,
               OPT_LIST-OPTIONS-LE,
               OPT_LIST-OPTIONS-LT,
               OPT_LIST-OPTIONS-NB,
               OPT_LIST-OPTIONS-NE.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* NOINTERVLS: BT and NB not allowed
CLEAR OPT_LIST.
MOVE 'NOINTERVLS' TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-CP,
               OPT_LIST-OPTIONS-EQ,
               OPT_LIST-OPTIONS-GE,
               OPT_LIST-OPTIONS-GT,
               OPT_LIST-OPTIONS-LE,
               OPT_LIST-OPTIONS-LT,
               OPT_LIST-OPTIONS-NE,
               OPT_LIST-OPTIONS-NP.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* EQ_AND_CP: only EQ and CP allowed
CLEAR OPT_LIST.
MOVE 'EQ_AND_CP' TO OPT_LIST-NAME.
MOVE 'X' TO: OPT_LIST-OPTIONS-CP,
               OPT_LIST-OPTIONS-EQ.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* JUST_EQ: Only EQ allowed
CLEAR OPT_LIST.
MOVE 'JUST_EQ' TO OPT_LIST-NAME.
MOVE 'X' TO OPT_LIST-OPTIONS-EQ.
APPEND OPT_LIST TO RESTRICT-OPT_LIST_TAB.
* Assign selection screen objects to option list and sign
* KIND = 'A': applies to all SELECT-OPTIONS
MOVE: 'A'          TO ***-KIND,
        '*'          TO ***-SG_MAIN,
        'NOPATTERN' TO ***-OP_MAIN,
        'NOINTERVLS' TO ***-OP_ADDY.
APPEND *** TO RESTRICT-***_TAB.
* KIND = 'B': applies to all SELECT-OPTIONS in block BLOCK_0,
*             that is, SEL_0_0, SEL_0_1, SEL_0_2
CLEAR ***.
MOVE: 'B'          TO ***-KIND,
        'BLOCK_0'    TO ***-NAME,
        'I'          TO ***-SG_MAIN,
        '*'          TO ***-SG_ADDY,
        'NOINTERVLS' TO ***-OP_MAIN.
APPEND *** TO RESTRICT-***_TAB.
* KIND = 'S': applies to SELECT-OPTION SEL-0-2
CLEAR ***.
MOVE: 'S'          TO ***-KIND,
        'SEL_0_2'    TO ***-NAME,
        'I'          TO ***-SG_MAIN,
        '*'          TO ***-SG_ADDY,
        'EQ_AND_CP' TO ***-OP_MAIN,
        'ALL'        TO ***-OP_ADDY.
APPEND *** TO RESTRICT-***_TAB.
* KIND = 'S': Applies to SELECT-OPTION SEL_0_3
CLEAR ***.
MOVE: 'S'        TO ***-KIND,
        'SEL_0_3' TO ***-NAME,
        'I'        TO ***-SG_MAIN,
        'N'        TO ***-SG_ADDY,
        'JUST_EQ' TO ***-OP_MAIN.
APPEND *** TO RESTRICT-***_TAB.
* Call function module
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
       EXPORTING
             RESTRICTION                = RESTRICT
*           DB                          = ' '
       EXCEPTIONS
             TOO_LATE                   = 1
             REPEATED                   = 2
             NOT_DURING_SUBMIT          = 3
            DB_CALL_AFTER_REPORT_CALL = 4
            SELOPT_WITHOUT_OPTIONS     = 5
             SELOPT_WITHOUT_SIGNS       = 6
             INVALID_SIGN               = 7
            REPORT_CALL_AFTER_DB_ERROR = 8
              EMPTY_OPTION_LIST          = 9
             INVALID_KIND               = 10
             REPEATED_KIND_A            = 11
             OTHERS                     = 12.
* Exception handling
IF SY-SUBRC NE 0.
ENDIF.

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Select options -restricting the operator value options.

Hi,
In selection screen for the select options or parameter declarations I need to restrict the operator options , like when they click for any select options it will give options to select = , #, <, <= , > , >=
all these options right.
I would like to restrict the user to select only > and >= while passing values.
Can anyone give me idea how I can approach this?
Thanks in advance.

Hi,
use this FM...
SELECT_OPTIONS_RESTRICT can be use to supress options available with a SELECT-OPTIONS on a selection screen.
jusy copy the code and execute it....It will give the exact output what u want.....
TYPE-POOLS sscr.
TABLES : marc.
*Define the object to be passed to the RESTRICTION parameter
DATA restrict TYPE sscr_restrict.
*Auxiliary objects for filling RESTRICT
DATA : optlist TYPE sscr_opt_list,
*** TYPE sscr_***.
*Defining the selection-screen
SELECT-OPTIONS : s_matnr FOR marc-matnr,
s_werks FOR marc-werks.
INITIALIZATION.
*Restricting the MATNR selection to only EQ and 'BT'.
optlist-name = 'OBJECTKEY1'.
optlist-options-eq = 'X'.
optlist-options-bt = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_MATNR'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY1'.
APPEND *** TO restrict-***_tab.
*Restricting the WERKS selection to CP, GE, LT, NE.
optlist-name = 'OBJECTKEY2'.
optlist-options-cp = 'X'.
optlist-options-ge = 'X'.
optlist-options-lt = 'X'.
optlist-options-ne = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_WERKS'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY2'.
APPEND *** TO restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
EXPORTING
restriction = restrict
EXCEPTIONS
too_late = 1
repeated = 2
selopt_without_options = 3
selopt_without_signs = 4
invalid_sign = 5
empty_option_list = 6
invalid_kind = 7
repeated_kind_a = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards
Kiran

Current Time as a Select-Option, Want to default to 4 Hours Earlier?

How would I do this?
Thank-You

hi,
do this way ...
select-options : s_uzeit for syst-uzeit.
initialization.
data : v_time like sy-uzeit,
v_defa like sy-uzeit.
v_defa = sy-uzeit.
v_time = sy-uzeit - 14400.
s_uzeit-low = v_time.
append s_uzeit.
Regards,
Santosh

Select-option default value???

DATA: gsber1         like csks-gsber.
select distinct GSBER
into (gsber1)
from csks
where kostl = sch_kostl.
endselect.
SELECT-OPTIONS : gsber    FOR csks-gsber DEFAULT gsber1.
why not input value gsber1?

Pung,
Pls. see the docs. below.
To assign default values to a selection criterion, you use the following syntax:
SELECT-OPTIONS <seltab> FOR <f> DEFAULT <g> [TO <h>] ....
Default values <g> and <h> can be literals or field names. You can only use fields that contain a value when the program is started. These fields include several predefined data objects.
For each SELECT-OPTIONS statement, you can specify only one DEFAULT addition. This means that you can fill only the first row of selection table <seltab> with default values. To fill more rows with default values, the selection table must be processed before the selection screen is called, for example, during the AT SELECTION-SCREEN -OUTPUT event.
You use the DEFAULT addition as follows to address the individual components of the first row:
To fill only the LOW field (single field comparison), use:
........DEFAULT <g>.
To fill the LOW and HIGH fields (range selection), use:
........DEFAULT <g> TO <h>.
To fill the OPTION field, use:
........DEFAULT <g> [to <h>] OPTION <op>.
For single field comparisons, <op> can be EQ, NE, GE, GT, LE, LT, CP, or NP. The default value is EQ. For range selections, <op> can be BT or NB. The default value is BT.
To fill the SIGN field, use:
........DEFAULT <g> [to <h>] [OPTION <op>] SIGN <s>.
The value of <s> can be I or E. The default value is I.
The input fields of the selection criterion are filled with the default values. The user can accept or change these values.
REPORT DEMO.
DATA WA_SPFLI TYPE SPFLI.
SELECT-OPTIONS AIRLINE FOR WA_SPFLI-CARRID
               DEFAULT 'AA'
                    TO 'LH'
                OPTION NB
                  SIGN I.
Don't forget ot reward if useful...

Default values in select options

Hi Experts ,
Could some one please explain how we can fill the select option fields with initial values, my current code is giving a "The current application triggered a termination with a short dump " dump
My Code:
data:lt_range_table       type ref to data,
    rt_range_table       type ref to data,
    read_only            type abap_bool,
    typename             type string.
data: lt_vendor      type ref to data,
      lt_vendor_site      type ref to data,
      lt_vendor_country     type ref to data,
      lt_vs_country type ref to data,
      lt_material    type ref to data.
field-symbols: <fs_vendor>      type table,
               <fs_vendor_site>      type table,
               <fs_vendor_country>     type table,
               <fs_vs_country> type table,
               <fs_material>    type table.
data:lr_componentcontroller type ref to ig_componentcontroller,
     l_ref_cmp_usage type ref to if_wd_component_usage.
create the used component
l_ref_cmp_usage = wd_this->wd_cpuse_use_select_options( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
    l_ref_cmp_usage->create_component( ).
endif.
get a pointer to the interface controller of the select options
*component
wd_this->m_wd_select_options =
       wd_this->wd_cpifc_use_select_options( ).
init the select screen
wd_this->m_handler =
       wd_this->m_wd_select_options->init_selection_screen( ).
*>>>> For Vendor
CALL METHOD wd_this->m_handler->set_range_table_of_sel_field
EXPORTING
    i_id           = 'LIFNR'
    it_range_table =   lt_vendor *.
In The Above code the table lt_vendor   does have a value and is of ref type 'DATA'.so i am pretty sure that is not the issue.
Edited by: Kalpana Arumugam on Nov 8, 2008 3:38 PM

Hi
What exactely u need? U follow the Drill Down method and get values in according to ur way.
If u need for EX code for Dril down..
Regards:
Prabu

Default value type - validation option form based on stored procedure

Please could somebody explain and provide an example of what the option :-
default value type - in the validation options for a field in the editor for a form based on a stored procedure ?
Thanks in anticipation.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Dmitry Nonkin([email protected]):
Absolutely, you can use SQL query to return the value like in the example above:
Default Value = select 5 from dual
Default Value Type = 'SQL query returns number'
or
Thanks,
Dmitry<HR></BLOCKQUOTE>
Hi,
and what about:
Default Value = select max(salary) from emp_salaries
Default Value Type = 'SQL query returns number'
Will it work? We go some troubles with this.
Thanx
Marcin

Select MULTIPLE default values for a multiple selection list box based on another field in Infopath 2010

Hello there - Before I explain my issue, I would like to point out that I have reviewed some other discussions on selecting default values for multiple selection listbox. But my issue is specific and different, and not answered by any of the discussions
I visited.
I have a multiple selection list box (say for example all countries in the world as values), and I would like to pre-select or setup multiple default values (say five countries) based on some criteria that I query from MS SQL database table.
I know we can go to Data | Default Values option to setup one or many default values for multiple selection list box. When I enter the default values manually this works. I also right click the field under the Multiple-Selection List Box group, then select
Add another Value Below and set the Default Value for this field to setup multiple default values.
However, if I reference a field (either an infopath field or a field from SQL database) I am not able to setup multiple default values. Infopath automatically selects the last field I selected for all instances and in the end I am able to see only one
default value selected instead of many. How to fix this problem? Why would infopath allow multiple default values when we enter it manually but not when we reference some fields?
Please let me know if you need more info. Appreciate your help.
Thanks!

Hi redhotc,
According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
was fine.Please have a try as the below link:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Select options no intervals - default value

Similar Messages

Maybe you are looking for