Selection and range

hy expert,
the module is MM,
i have a select option: sobkz for mseg-sobkz.
but i want to check that the value the user enter is only
                              'V', or
                              'W' or,
                              'E' or,
                              'K' or,
                              'M' or,
                              'Q' or.
how can i check that the sobkz is in those 6 value (or range of value)?
thank you.

This is a little tricky when checking a range of values, but for single values. You can just loop the select-option and check it in the AT SELECTION-SCREEN event.
AT selection-screen.
loop at sobkz.
if sobkz-sign = 'I'
and sobkz-option = 'EQ'
and ( sobkz-low ne 'V'
       or sobkz-low ne 'W'
       or sobkz-low ne 'E
        or sobkz-low ne 'K'
        or sobkz-low ne 'M'
        or sobkz-low ne 'Q' ).
* Give message   .
endif.
Endloop.
Again, checking the range is tricky, cuz the user could enter 'A' for the low value and 'Z' for the high value, so how would you check it then, right?
Regards,
Rich Heilman
Edited by: Rich Heilman on Jun 8, 2009 12:54 PM
Edited by: Rich Heilman on Jun 8, 2009 12:58 PM

Similar Messages

1) Select a range of files in Finder; and 2) Cut files!

Two questions:
1) Why is it not possible to select a range of files in Thumbnail view in the Finder while pressing Shift...works fine in the List view? Makes no sense at all!
2) Why is it not possible to cut files in the finder using "CMD X" or "Cut" ... I can only copy or drag an drop? That ***** bigtime!

1) Not really, what I want to do is select the first file then press shift and then select the last file of the range. Usually this should select all the files between the first and the last in the range (and that actually happens in the list view) ...but NOT in the stupid Thumbnail view (which I need to organize my pictures).

Select-options and ranges

Hi all,
Belated Happy Holi.
Can u explain me the difference between
Select-options and ranges?
When, where and how to use them ?
I know the basic differences, but i need to know in deep .
could u give me the informatin with a scenario please ?
Thanks in advance
Ravi

HI
<u>SELECT-OPTIONS:</u> Declare an internal table that is also linked to input fields on a selection screen
<u>RANGES:</u> Declare an internal table with the same structure as in select-options, but without linking it to a selection screen.
FOR FURTHER DOCUMENTATION PLEASE GO THROUGH THE LINK
<a href="http://72.14.203.104/search?q=cache:btyoj86smhEJ:www.sap-img.com/abap/difference-between-select-options-ranges.htmSelect-optionsandrangesIN+ABAP&hl=en&gl=in&ct=clnk&cd=1">Difference Between Select-Options & Ranges</a>
<a href="http://72.14.203.104/search?q=cache:EJgiHLpghDEJ:help.sap.com/saphelp_nw04/helpdata/en/fc/eb3034358411d1829f0000e829fbfe/content.htmSelect-optionsandrangesIN+ABAP&hl=en&gl=in&ct=clnk&cd=4">Statical Declaration</a>
<a href="http://72.14.203.104/search?q=cache:VWS1erlabRIJ:help.sap.com/saphelp_nw04/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/content.htmSelect-optionsandrangesIN+ABAP&hl=en&gl=in&ct=clnk&cd=5">Selection tables</a>
REGARDS
ANOOP
Message was edited by: ANOOP R.S

Dynamic Select Options/Ranges Maintain and Display in my screen

Hi I am trying to figure out if I can create a screen which will will read various select-options I have stored in a custom table but am having trouble finding something which will allow me to display each of 'select-options' in my dynpro... has anyone ever done this?
I'd rather not reinvent the wheel or mimic - does anyone know of a way to basically use a loaded range and display it on a screen for display or maintenance using standard SAP routines/classes?
Thanks in advance!
Roc..

@Adrian - I got your email regarding the code sample, here is a quick example of how to popup a dynamic selection for up to 5 tables...
*& Report ZRS_DYNAMIC
REPORT zrs_dynamic.
* START Dynamic Range Selection Definitions
* Definition of the selection_if variable, which is used to reference
* the selections obtained
DATA: gv_selid TYPE rsdynsel-selid.
* Definition of the TABLES_TAB table for use in providing the list of
* fields available for creating select options from
DATA: gt_tables TYPE STANDARD TABLE OF rsdstabs.
DATA: gs_tables TYPE rsdstabs.
PARAMETERS: p_tab1 TYPE tabname DEFAULT 'KNA1',
            p_tab2 TYPE tabname DEFAULT 'KNB1',
            p_tab3 TYPE tabname DEFAULT 'KNC1',
            p_tab4 TYPE tabname DEFAULT 'KNVV',
            p_tab5 TYPE tabname DEFAULT 'KNVP'.
START-OF-SELECTION.
gs_tables-prim_tab = p_tab1 .APPEND gs_tables TO gt_tables.
gs_tables-prim_tab = p_tab2 .APPEND gs_tables TO gt_tables.
gs_tables-prim_tab = p_tab3 .APPEND gs_tables TO gt_tables.
gs_tables-prim_tab = p_tab4 .APPEND gs_tables TO gt_tables.
gs_tables-prim_tab = p_tab5 .APPEND gs_tables TO gt_tables.
* Definition of Table which includes the select-option range for field
TYPES: ty_selopt_t TYPE rsdsselopt OCCURS 10.
* Definition of field name and select option range table
TYPES: BEGIN OF ty_frange,
           fieldname TYPE rsdstabs-prim_fname,
           selopt_t TYPE ty_selopt_t,
         END OF ty_frange.
TYPES: ty_frange_t TYPE ty_frange OCCURS 10.
TYPES: BEGIN OF ty_range,
           tablename LIKE rsdstabs-prim_tab,
           frange_t TYPE ty_frange_t,
         END OF ty_range.
TYPES: ty_range_t TYPE STANDARD TABLE OF ty_range.
DATA: it_ranges TYPE ty_range_t.
* work areas
DATA: gs_ranges TYPE ty_range.
DATA: gs_frange TYPE ty_frange.
DATA: gs_selopt TYPE rsdsselopt.
DATA: gt_ranges TYPE ty_range_t.
DATA: gt_frange TYPE ty_frange_t.
DATA: gt_selopt TYPE ty_selopt_t.
* Definition of the fields list avaiable
TYPES: ty_fields TYPE STANDARD TABLE OF rsdsfields.
DATA: it_fields TYPE ty_fields.
DATA: gs_fields TYPE rsdsfields.
* END Dynamic Range Selection --------------------------------------------
CALL FUNCTION 'FREE_SELECTIONS_INIT'
    EXPORTING
      kind         = 'T'
    IMPORTING
      selection_id = gv_selid
    TABLES
      tables_tab   = gt_tables.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FREE_SELECTIONS_DIALOG'
    EXPORTING
      selection_id    = gv_selid
      title           = 'Select WHERE criteria for Rule'(s12)
      as_window       = 'X'
      start_row       = 7
      start_col       = 10
    IMPORTING
      field_ranges    = it_ranges
    TABLES
      fields_tab      = it_fields
    EXCEPTIONS
      internal_error = 1
      no_action       = 2
      selid_not_found = 3
      illegal_status = 4
      OTHERS          = 5.
Edited by: Rocco Scocco on Jun 17, 2010 3:48 PM
Edited by: Rocco Scocco on Jun 17, 2010 3:49 PM

Difference between select-option and range

Hi,
wat are the difference between select-option and range
where u have to use those and give the syntax for the range option.
if u use range option in report programming there is any advantages ?
pls reply for this ..
thanks
rams

Hi,
Not much of a difference,
A Select-Option could be like,
SELECT-OPTIONS sel FOR f
And a Range could be like,
DATA: BEGIN OF sel OCCURS 10,
         SIGN(1),
         OPTION(2),
         LOW LIKE f,
         HIGH LIKE f,
      END   OF sel.
Here they both function the same. But then the Select-Options has numerous options associated with it than the RANGE option.
Hope it helps,
Pradip Parmar.

Applescript. Select cell range and copy to clipboard

Hi everyone,
I have been looking at trying to select a range of cells, eg B1 to H40, once selected I would like to copy the selection to the clipboard.
I am having difficulty selecting a range of cells...
any help would be very much appreciated.
Many thanks
Phelix

Prepend my original suggestion to Jerry's and you have what you want:
Make the Summary table reference only that data you want in your summary:
select the table
<JERRY'S SUGGESTION>
Command-C (Copy)
Switch to Preview
Command-N (New document from Clipboard)
Command-S (Save)
</JERRY'S SUGGESTION>
another way to to place the summary table in another sheet. Then you can just print that sheet to PDF by selecting the sheet, then select the menu item "File > Print…", then the option in the "PDF" menu at the bottom right:

How do I set the default tool. It's on range selection and I want it to be the select tool.

Final Cut Pro X. How do I set the default tool? It's on range selection and I want it to be the select tool.

Type the letter "a" or select it from the drop-down...

Using cs6, I've tried filling a selection that I've made using "select color range" but the new fill gets diffused and transparent in places

Is there a way of turning this "color range selection" into a normal selection?

Yes
With Color Range there can be stray partially selected pixels all over the place. It best to first make the color range selection and with the selection active switch to the rectangle marquee tool and hold the Alt or option key down and clean up the stray pixel by subtracting large rectangle areas. You will stall have partially select pixels in the area you want solid. You can use a trick I use when I work on layers mask. Layer Mask are grayscale channels. When you paint with Black and White with the brush blend mode set Overlay the white and black areas are protected. Only the gray partially select area will change. So You can save your cleaned up Color Range selection as an Alpha Channel and paint with white to turn the partially select pixels in the Alpha channel to fully selected.
To show how the overlay mode works I could just have saved the color selection as and Alpha channel. Switched to the Channels palette targeted the alpha and cleaned up the selection. I chose to show that overlay blend will even work in RGB mode when you paint Black and White.
After I cleaned up the stray pixels I added a an empty layer on top om the image and filled the selection with black then inverted the selection and filled with white to create a Black and white work layer. Grabbed a black paint brush set overlay mode and repeatedly brushed over the image and drove the gray pixels to black. View screen capture in a new browser tan ans scale it to actual pixels. This sits scale upload images poorly.

I still have a problem clearing history and i did select time range to Everything

I still have a problem clearing history and i did select time range to "Everything". I tested using Internet explorer and I could clear the history there so its not a problem with the Xp secondary account. I even disabled the add ons in firefox and still get the same issue

sorry, scratch this, the first post did enable me to find a solution, it was the signon.sqlite file that had become corrupted.
As an interesting aside, this has also fixed the problem with using Xmarksspace which was giving me an "error 3" synchronising problem.
Apologies for the tone of my previous posting, you did provide the information that enabled me to find a solution, thank you and sorry.
Regards
Crashhot

Partition Name in Select and Group-By

Is there a function that returns the partition name a row is stored in? I'd like to use it in a SELECT statement, if it exists.
The goal is to get row counts per partition to determine skew on a hash-based partition (otherwise, I'd just select and group-by the partition key). I want to do something like this:
SELECT PARTITION_NAME, COUNT(*) as PER_PART_COUNT
FROM SOMETABLE
GROUP BY PARTITION_NAME;Obviously, I would replace the string "*PARTITION_NAME*" with whatever function returns that value.
NOTE: Before the forum sharks jump all over me, I did search the documentation and forums, but I came up empty handed.

Hi,
This is hokey - but you can use the undocumented function "tbl$or$idx$part$num" like so:
SELECT   atp.partition_name
       , COUNT (*) AS count_rows
    FROM all_tab_partitions atp
       , (SELECT tbl$or$idx$part$num ("SCOTT"."TAB1"
                                    , 0
                                    , 1
                                    , 0
                                    , partition_col1 -- your 1st partition key column
                                    , partition_col2 -- your 2nd partition key column
                                     ) AS part_num
               , 'TAB1' AS table_name
               , 'SCOTT' AS owner
            FROM scott.tab1) pt
   WHERE atp.table_name = pt.table_name
     AND atp.table_owner = pt.owner
     AND atp.partition_position = pt.part_num
GROUP BY atp.partition_name;Note - this probably won't perform well at all... but it could be an option...
Message was edited by:
PDaddy
... On 2nd thought - don't do it - it seems it is pretty unstable - brought my session to a halt a couple of times... Forget I mentioned it :)
... On 3rd thought - if you add ROWNUM - it works fine - seems you need to materialize the result set in the inner query - like so:
CREATE TABLE part_tab (part_key int
                     , a int
partition by range (part_key)
(partition p1 values less than (100)
,partition p2 values less than (200)
,partition p3 values less than (maxvalue)
insert into part_tab
select rownum
     , rownum
FROM all_objects
where rownum <= 1000; SELECT atp.partition_name
     , COUNT(*) AS count_rows
FROM all_tab_partitions atp
   , (SELECT TBL$OR$IDX$PART$NUM("PART_TAB", 0, 1, 0, part_key) AS part_num
           , 'PART_TAB' AS table_name
           , user AS owner
           , ROWNUM AS rn -- Materialize the result set by adding ROWNUM...
      FROM part_tab) pt
WHERE atp.table_name = pt.table_name
AND atp.table_owner = pt.owner
AND atp.partition_position = pt.part_num
GROUP BY atp.partition_name;

Select- Color Range- Results in Blue Screen (PC) (driver out of date)

I've been using the CS6 beta about two days. While experimenting with color range I experienced two consecutive blue screen crashes. The first time it happened,I was working with the color range selector and was replacing the selected areas with another color using the paint bucket. About the third time I attempted this, my PC blue screened. The second time, I opened a photo, went to Select>Color Range and got an immediate blue screen crash.
I then went back to CS5 and I've been playing with the same scenario with no apparent problems.
My PC is a store built computer. It consists of an MSI 990-FXA GD80 motherboard, an AMD Phenom 1100t CPU, Asus GTX550 Ti graphics card and 8 gig of RAM. It boots from a 60 gig SSD and my programs reside on a 500 gig hard drive. The OS is Windows 7 Professional 64 bit. CS6 is using the hard drive for its scratch disk and Photoshop is using 4339 mb of the 7232 mb of available RAM - I haven't changed that. I'm running CS6 as administrator because the way it installed, it would only run in that fashion.
One disappointment during the installation was CS6 made no attempt to read my preferences from the CS5 install. That may be covered in another post, I've not yet looked.
Please keep us informed as new betas are released, because I would like some time to work with this puppy before plunking down big bux for the upgrade. As it is now, I'm going back to CS5. I get mighty nervous when my super computer blue screens!
Gerry
gswetsky AT bellsouth DOT net

The GPU is often at root of issues like yours. I've had so many problems with Nvidia drivers for their gaming-oriented adapters (like yours) that I finally went with one of their workstation cards. I have a Quadro card with just enough RAM to make Photoshop happy. The workstation drivers are optimized for reliability, the consumer card drivers are optimized for gaming and that often means they're less stable and reliable with Photoshop.

Devolped an ALV report for daily cash receipts for selected date range

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

Devloped an ALV report for daily cash receipts for selected date range

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

Hi,
You can develop simple reports using Report Painter.
You may be also interested in:
Check report SAPMF05A for credit memo
See the following Std reports on Payment Advices execute the Tcodes:
S_ALR_87009888
S_ALR_87009889
S_ALR_87009890
S_ALR_87009891
S_ALR_87009892
S_ALR_87009893
S_ALR_87009978
S_ALR_87009979
S_ALR_87009980
S_ALR_87009981
S_ALR_87009982
S_ALR_87009983
S_ALR_87010056
S_ALR_87010057
S_ALR_87010058
S_ALR_87010059
S_ALR_87010060
S_ALR_87010061
S_ALR_87010066
S_ALR_87010067
S_ALR_87012106
S_ALR_87012107
S_ALR_87012108
S_ALR_87012109
S_ALR_87012110
S_ALR_87012111
S_ALR_87012116
S_ALR_87012117
S_ALR_87012200
S_ALR_87012201
S_ALR_87012202
S_ALR_870122
S_ALR_87012204
S_ALR_87012205
S_ALR_87012350
S_ALR_87012351
S_ALR_87012352
S_ALR_87012353
S_ALR_87012354
S_ALR_87012355
sample ALV report:
tables:
marav. "Table MARA and table MAKT
Data to be displayed in ALV
Using the following syntax, REUSE_ALV_FIELDCATALOG_MERGE can auto-
matically determine the fieldstructure from this source program
Data:
begin of imat occurs 100,
matnr like marav-matnr, "Material number
maktx like marav-maktx, "Material short text
matkl like marav-matkl, "Material group (so you can test to make
                        " intermediate sums)
ntgew like marav-ntgew, "Net weight, numeric field (so you can test to
                        "make sums)
gewei like marav-gewei, "weight unit (just to be complete)
end of imat.
Other data needed
field to store report name
data i_repid like sy-repid.
field to check table length
data i_lines like sy-tabix.
Data for ALV display
TYPE-POOLS: SLIS.
data int_fcat type SLIS_T_FIELDCAT_ALV.
select-options:
s_matnr for marav-matnr matchcode object MAT1.
start-of-selection.
read data into table imat
select * from marav
into corresponding fields of table imat
where
matnr in s_matnr.
end-of-selection.
Now, we start with ALV
To use ALV, we need a DDIC-structure or a thing called Fieldcatalogue.
The fieldcatalouge can be generated by FUNCTION
'REUSE_ALV_FIELDCATALOG_MERGE' from an internal table from any
report source, including this report.
The only problem one might have is that the report and table names
need to be in capital letters. (I had it )
Store report name
i_repid = sy-repid.
Create Fieldcatalogue from internal table
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME         = sy-repid
            I_INTERNAL_TABNAME     = 'IMAT' "capital letters!
            I_INCLNAME             = sy-repid
       CHANGING
            CT_FIELDCAT            = int_fcat
       EXCEPTIONS
            INCONSISTENT_INTERFACE = 1
            PROGRAM_ERROR          = 2
            OTHERS                 = 3.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = i_repid
            I_STRUCTURE_NAME         = 'marav'
            I_DEFAULT                = 'X'
            I_SAVE                   = 'A'
       TABLES
            T_OUTTAB                 = imat.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
Hope this will help.
Regards,
Naveen.

How do I select a range of values in MySQL using a drop down menu

Hi,
I have a database of picture frames that have a value of
frame width. I want to be able to select a range of values (i.e.
.50" to 1") instead of each and every value (i.e. .50", .56", .76",
etc.). I have a drop down menu (mnuWidth) with 5 ranges (see
attached code).
Each selection has a value from 1 to 5 indicating the range I
want to search. In my results page I have let DW set up a recordset
(see attached code)
Can anyone tell me how to get this to choose a range instead
of just the value entered by my menu?
Thanks in advance.
Tom

I have been growing fond of lookup tables. Your lookup table would have your numbers in one column and the values you want returned in the next.
Lookup table
item
Name
1
a
2
b
3
c
4
d
5
e
6
f
7
g
8
h
9
i
Input table
input
Name
1
a
B2 and copied down:
LOOKUP(A2,lookup::$A$2:$A$11,lookup::$B$2:$B$11)
Caution: Lookup will return the closest value so it it looks for "10" in this example it will return "i"
If you don't want to see the error messages from blank inputs, wrap Lookup in IFERROR.
hope this helps
q

How do I select a range of rows from an internal table in the debugger?

Hi,
I have a case where I wanted to delete a range of rows (several thousand) from an internal table using the debugger.
It seems that rows can only be selected one at a time by selecting (clicking) on the far left side of the row.
This is cumbersome, if not impossible when wishing to delete several thousand rows.
Other tools, such as Excel for example, allow for selecting a range of rows by selecting the first row and then holding the SHIFT key and selecting the last row and all rows in between will be selected.
I can't seem to find the combination of keys that will allow this in the table (or structure) tab of the debugger.
Is it possible to select a range of rows without having to select each row one at a time?
Thanks for your help,
Andy

While it's a Table Control and should/could have a button to select all fields (or visible fields)...I don't think we can do it right now...I know it's a pain to select each row one at a time...but I don't we have any more options...
Greetings,
Blag.

Selection and range

Similar Messages

Maybe you are looking for