Selection in the master table is not getting reflected in the child table

<p> I have a 4 level master detail relationship.I have a bounded taskflow where I have a master in the first view.The child (The other two levels as a tree) in the second view.I move to second view when i click the command link(Each row has a command link) of the master table (present in the first view).</p>
<p>At the very first time when i try to insert a row in the child it's successful .I am able to see the same in the second view (The corresponding child of the master row which i have clicked).The 2 view is not refreshed i have panel strech layout in the 2 view which i am refreshing(PPR) on inserting the row. The master table is not refreshed as it is in the 1 view.I am not manipulating the master table but it was being set to the first row the second time .Added to that the 2 view doesn't have parent table .
</p>
Thanks,
Raj.

Hi Frank,
I am using jdev 11.1.1.6 and integrated wls.
I have a single taskflow.I have a 4 level master detail.The vo's are connected through a view link . I have dropped the first level as a table . On selecting a row the corresponding children are displayed.The children are displayed as a tree. I have a tree context menu where i have inserted a row using popup . When the user clicks on the ok dialog i am commiting the data and refreshing the tree.
Now the problem is when i first create the row it's working properly . After when i try to create another row this time the currency of the first level is reset to the first row.
As suggested by you i have tried disabling the commit opertion . But the issue still occurs.
Thanks,
Raj
Edited by: RajaSekharReddy.M on Feb 26, 2013 6:03 PM

Similar Messages

Chnages in the Graph properties are not getting reflected in the Browser.

Hi,
I have made some changes in the Graph properties in web template,
Eg. : 1. change in color of a series for a columnar type graph
2.change in the Text properties of Graph Series..
When I save the template and try to run in the Browser, these changes are not getting reflected.
Can anybody help me in this aspect ?
Thanks.
Regards.
Amol Bade

Same here :´(
Thanks In Advance
Juan

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
Regards
TD

Text overflown in the first page is not getting printed in the next page

Hi Experts,
I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
Please help me regarding this.
Thanks & Regards,
Karthik MD

Hi,
This issue is in ADOBE, I think there is no concept of Window in ADOBE,
The text box is placed inside a Subform.

[svn:fx-trunk] 11546: fix so the textLayout. swc does not get modified during the build process.

Revision: 11546
Author:   [email protected]
Date:     2009-11-06 15:42:05 -0800 (Fri, 06 Nov 2009)
Log Message:
fix so the textLayout.swc does not get modified during the build process.
QE notes: no
Doc notes: no
Bugs: no
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/build.xml

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Master data is not getting enabled in the InfoSet.

Hi Experts,
I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
Can anyone please let me know how do I bring the master data in the query???
Also please advice me whether I should have only 3 DSOs in the infoset.
Please help.
Thanks

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

How to make sure the Live cache information is getting reflect in the bex?

Hi All,
When the user enters some data in the planning book as soon as he saves it. It should be getting reflected in the cube isnt it? when i run the query it doesnt get reflected?
What is the technical settings should i do ? to reflected those changes in apo 3.5 verison.?
Thanks
Pooja

Hi Pooja, Rafael,
You can actually have a bex report with life data.
For that you need to use a remote cube, and not a basic one.
On comment though: you access only the information stored in the live cache, so for example you will not get the projected stock easily.
By default the projected stock is not stored; but even if you sotre it in a time series key figure, you still need to run the calculation... so any changes in order will not be reflected untill the next sotck calculation...
So to get the projected stock real time is more complex and required some abap coding... to get the the order real time is quite easy to do with remote cube
Good luck
Julien

Master data is not getting displayed in the Report in Quality

HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
Thanks

Hi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO

Master Data Attribute is not getting reflected in the Cube?

Hi All,
I have loaded the data from ODS to the cubes for customer master and it contains a lot of navigational attributes
for instance :
master data for customer in development is
customer customer group 5(nav attributes) Customer pricing group
1001 HAW IE
And hence when i load the customer 1001 from the ods to the cubes i can see the customer contains navigtional attributes for customer pricing group but CUSTOMER GROUP5 doesnt gets displayed in the cube.
I check the master data it contains the values for customer group. How to Rectify this issue?
Pls advise me!!
Thanks
Pooja

hi all,
I have explicity clicked on the navigational attributes in the cube i can see the values for the other navigational attributes being displayed in the cube for customer master but then only one navigational attribute is not getting displayed.
For instance
customer, customer gp2, customer grp5
100, nr, nv
only customer grp5 is not getting displayed which has values in the master data but then customer grp2 along with customer is getting displayed.
Thanks
Pooja

The payment terms are not getting reflected in PO

Hi,
We are in SRM5.0 Extended Classic scenario.
We have created new payment term in ECC and transferred to SRM using BBP_UPLOAD_PAYMENT_TERMS and after tranferring it to SRM I am able to see the new payment term in table BBP_PAYTERM and BBP_PAYTERM_TEXT in SRM system.
But non of the payment terms are not reflecting into PO. We are not getting any errors while processing the PO.
Could you please suggest what may be the issue here.
Best Regards,
Siddappa

Hello Siddappa,
I am a little confused here with the scenario.
I understand that the payment terms are recenly created and replicated. So naturally they would have been updated in the relevant vendor master as well. Now has the vendor master been replicated to SRM from ECC once the payment terms were updated.
So from what you have mentioned "When we check the BBP_PD, the payment term is reflecting for the POs created after shopping cart approval."
So does this mean once the SC is approved then the PO is created and then the Terms of Payment are seen in the PO.
However "If the PO created through describe requirement, the Vendor will not assigned the PO created will go to Held status and buyer will process the order."
So does this mean since the Vendor is not mentioned the Terms of Payment is not being reflected and will happen only once the same is specified in the PO.
I have a question on whether after replicating the Payment Terms, has it been seen in any of the PO's created so far or it is always blank.
Regards
Pramod

Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

Hi,
I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
I have referred the following links:
http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
this scheduler on development environment changes are getting reflected but not working on the production environment.
Kindly help!
Regards, Shruti

You should check the obvious. You made the change in dev, but did you make the change in production too? And, is the term you updated, actually the one that you are looking at in the list item?
There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process. In this case, you should check the ULS logs for any errors.
Chris
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

I received a "Ghost e-mail" (duplicate of another e-mail. I could delete the original, but can not get rid of the "Ghost" e-mail from my inbox?

I received a ghost, or duplicate e-mail on my Mac and am unable to delete the duplicate from my inbox. There is no message when you open it, The message came from Gacebook. What can I do to get this deleted?

http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox
Comcast online email is considered '''web mail''' so you need to scroll down that support page to the web mail section.

Structure is not getting filled in the subroutine

Hi Gurus,
I'm working on a Z-report ZMB52 for fetching Reserved Stock and showing it in a column.
The following code in a subroutine I've written for the same.
DATA: GS_RESB LIKE LINE OF GT_RESB.
    CLEAR: BESTAND.
    IF BESTAND[] IS NOT INITIAL.
      SELECT MATNR
             BDMNG
        FROM RESB
        INTO TABLE GT_RESB
        FOR ALL ENTRIES IN BESTAND[]
        WHERE MATNR EQ BESTAND-MATNR.
        IF SY-SUBRC EQ 0.
          SORT GT_RESB BY MATNR.
          LOOP AT BESTAND.
           READ TABLE GT_RESB INTO GS_RESB WITH KEY MATNR = BESTAND-MATNR. "BINARY SEARCH.
             IF SY-SUBRC EQ 0.
               MODIFY BESTAND TRANSPORTING BDMNG WHERE MATNR = BESTAND-MATNR.
             ENDIF.
             CLEAR: BESTAND, GS_RESB.
          ENDLOOP.
        ENDIF.
     ENDIF.
When I debug, I can see that the structure GS_RESB is not getting filled through the READ TABLE statement. However, GT_RESB shows the data.
Could you please tell me where am I going wrong and a way to correct it?
Thanks in Advance!
Best Regards,
Ashutosh.

Hi Joshi
You can use
LOOP AT GT_RESB INTO GS_RESB WHERE MATNR = BESTAND-MATNR. "BINARY SEARCH.
              MODIFY BESTAND TRANSPORTING BDMNG WHERE MATNR = BESTAND-MATNR.
            CLEAR: BESTAND, GS_RESB.
ENDLOOP.
And please check in debug BESTAND-MATNR .
Best regards.

Selection in the master table is not getting reflected in the child table

Similar Messages

Maybe you are looking for