Selection of DataSource and InfoCube

Hi all,
I had a requirement..
FOR ONE REPORT
Data is coming through the table: SKA1 and some account groups to be picked from KTOKS (G/L account group)
they are: SATX, MFCG, OTHR, CONS..
and from BSIS/BSAS table select BUKRS, GSBER, HKONT, GJAHR, MONAT, DMBTR, SAKNR and WRBTR....
From the above information i have to generate sales and EBITDA report...
I have already extracted 0GL_ACCOUNT_T011_HIER from R/3
So, overall FSV has succesfully come to BW..
My Doubt is Now how to proceed inorder to generate a report??
What is the DataSource and InfoCube to be used???
Please help me....urgent...
Thanks

Thanks for your information....
But what i was looking is when i load FSV hierarchy, is it necessary to use DataSource in R/3 as well as InfoSource in in BW..
Shall we use The hierarchy inorder to generate EBITDA report...
In R/3, FI Consultants are calculating EBITDA using FSV...
That FSV, i have brought into BW...So, the same can i use for our BW reports..
I mean Report on InfoObject....
Pls...suggest me...
Thanks

Similar Messages

Problem in creating the trasformation between my DataSource and InfoCube

Hi All,
when i am trying to create the trasformation between my DataSource and InfoCube through "Create Trasformation"...in the source of trasformation area when i am giving my DataSource 0CO-OM_CCA_1 and in the Source System T90CLNT090. system is showing the message "Source RSDS 0CO_OM_CCA_1 T90CLNT090 not active".......what to do ???.....then I went and check the monitoring tab there I got the system message that I am attaching belowu2026u2026Please provide the solution..........previously when i was doing that time there was no problem, but i was unable to transfer the data from my PSA to Infocube. So i have deleted the transfer rule and every thing and then when i am trying again i am getting this error.....so plz advise. The system message isu2026..
u201CActive version of emulated 3.x DataSource 0CO_OM_CCA_1(T90CLNT090) cannot be displayed
Message no. RSDS170
Diagnosis
The A version of the emulated 3.x DataSource cannot be displayed because no active transfer structure with PSA is available.
Procedure
Create a mapping between the 3.x DataSource and a 3.x InfoSource and activate the transfer rules. Select PSA as the transfer method in the 3.x InfoSource.
Alternatively, you can migrate the 3.x DataSource in a DataSource to create an active version.u201D

when u deleted tranfer rule , psa for the DataSource 0CO-OM_CCA_1 is no longer available..
since u plan to use transformation, its better to migrate the DataSource 0CO-OM_CCA_1 to 7.0 version...
just select the datasource and right click.. migrate to 7.0... once its migrated, u can create the transformation..also create info package and DTP for loading data to cube...
if u don't want to migrate to 7.x .. then create infosource .. transfer rule and update rule..

Inventory datasources and infocubes

HiGurus,
I am going to install all standard datasources,infocubes from the business content.
Can you please suggest me how to do.?
Thanks
Aravinda

Hi ,
RSA1 ->Business Content -> Collect the needed objects and click Instal .
Steps in instaling Business Content
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
These are the Cubes and data sources in MM
MM Data Sources
0MM_PUR_VE_01 Vendor Evaluation
2LIS_02_HDR Purchasing Data Header Level
2LIS_02_ITM Purchasing Data Item Level
2LIS_02_SCL Purchasing Data Schedule Line Item
2LIS_03_BX Stock Initialiazation for Inventory Management
2LIS_03_BF Goods Movement for Inventory Management
2LIS_03_UM Revaluations
MM Cubes
1 0PUR_O01 Purchase Order Items
2 0PUR_O02 Purchase Orders
3 0PUR_DS03 Order Schedule Lines

Info related to SD datasources and infocubes

Hi,
Could anyone send me some information on the data sources, infocubes, the possible enhancements etc. related to Sales Overview and Offers/Orders of the LO extraction? My mail id is [email protected]
Thanks.
Regards,
Jon.

Hi ,
SD Cubes
0SD_C01 Customer
0SD_C02 Shipping Point
0SD_C03 Sales Document Header Data
0SD_C03 Sales Document Item Data
0SD_C05 Delivery Item Data
SD Data Sources
2LIS_01_S001 Customer
2LIS_01_S005 Shipping Point
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_12_VCITM Delivery Item Data
2LIS_13_VDKON Billing Document Condition
2LIS_13_VDITM Billing Document Item Data
Sales Over view Related DS InfoSources
2LIS_01_S260: SD - Sales order
2LIS_01_S261: SD Delivery
2LIS_01_S262: SD - Billing document
2LIS_01_S263: SD - Sales order / delivery
Offers / Ordres Related DS
2LIS_01_S264 SD - Quotation
2LIS_01_S260 SD - Sales order
2LIS_12_VCSCL - Schedule Line Delivery
2LIS_12_VCITM - Delivery Item Data
Message was edited by:
 Renjith Kumar
Message was edited by:
 Renjith Kumar

How to find out relevant Infosources and Infocubes for Datasources (LO)

Hi Gems,
I am new to BW.
How to find out relevant Infosources and Infocubes for Datasources for LO Cockpit
any help site pls.
Thanks in advance

1. make sure that your datasources have activated (trans RSA5 in SAP Source System) from the SAP Source system (Ex: R/3 or SCM System)
2. after that you have to run trans RSA9 in SAP Source System to transfer new datasource in to BI System.
3. log-on into BI System, run trans RSA1, choose SourceSystem Tab in the left panel. Right click on to your SAP Source System then choose Replicate.
4. in the left panel choose BI Content tab, select infoObjects by infoArea.
5. then Click on Grouping, select in Dataflow Before and afterward. Click Collection Mode, select Collect Automatically.
6.in the middle panel, expand "Supply Chain Management" infoArea, select both Characteristics: Logistics General and Key Figures: Logistics General. Right click on it and select Insert Objects for Collections.
7. After the objects have been inserted into Collected Objects then choose install with option Install in Background.
8. Wait for the result.
Pls give point if you see its helpful.
Regards,
Chuong Hoang

Help with dynamic datasource and record selection

Hi, I'm having some difficulty with part of an application I'm trying to build, but here's some background first. I am a student at the University of Maryland, and I'm writing an application for one of the departments here at the university. It is sort of a front-end for an access database with a lot of extra functionality. This includes reports. First of all, the user can change the databse that the application uses, so I store that in an appsetting. For this reason, I have to tell the report what database to use at runtime rather than using the database expert. I am building a sort of report wizard in which the user selects certain values, and based upon those values, the SQL statement that the report gets data from changes. So almost everything about the report's data is dynamic and will be determined at runtime. So for example if the user chooses an officer report by chapter names, I do this (chapters is a comma delimited string): string sel = "SELECT * FROM [Undergrad Leadership] WHERE [Leadership Position] = '" + txtPosition.Text + "' AND [Chapter Name] IN (" + chapters + ");"; The part I am lost on, is how to actually interface with crystal reports. In the following code, conn is an OleDbConnection to the correct database, rep is the ReportDocument, and view is a CrystalReportsViewer. rep.DataSourceConnections[0].SetConnection(conn.DataSource, conn.Database, false); rep.RecordSelectionFormula = sel; view.ReportSource = rep; When I try to load the report, I get the following error message: Error in formula <Record Selection>: a number, currency amount, boolean, date, time, date-time, or string is expected here. Also, assuming this formula gets fixed, how do I actually get fields from this formula and datasource onto my report, since I can't do it at design time? Thanks in advance for the help. -Jared 

RCAPI (Report Creation and Modification) calls are only available with Crystal Reports Server RAS SDKs. This means that using the bundled version of Crystal Reports for Visual Studio will not allow you to place fields onto the report. A free copy of Crystal Reports Server comes with a registered copy of Crystal Reports Developer. My guess is that you don't have either of these products and that you are just using the product that came with Visual Studio.All is not lost. The first question is, do you really need to add the fields at runtime? In many cases developers just want to have control of the data that gets sent to the report and they are ok with having the same fields display.In your code you are changing the datasource which is fine, and you are assigning a Record selection formula which is also fine. The problem with the record selection is that it doesn't fit the syntax of the Report. I would suggest printing out the value that you programatically get for the formula and insert it into the Crystal Report Designer. You will probably get the same error there and gets some hints as to why it doesn't work.What I would suggest is creating a template report that already has the fields on the report and then change its datasource at runtime and add a RecordSelectionFormula.Otherwise you will have to use RAS to be able to add fields at runtime. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

IS Utilities - standard datasources,Infosources and Infocubes

Hi everybody,
I have a requirement of working on IS Utilities with BW 3.5. I have R/3 system 4.7 with IS-U patch 4.72 and BI add-on 3.5.3. Domain is electricity trading and I need to deveIope reports for the same. I require some document which provides some information about standard datasource,infosources and infocubes available for the development.
Regards,
Lokesh Ujjwal

Kindly visit the following link and you will get every information of standard cubes, reports, datasources etc related to IS Utilities.
http://help.sap.com/saphelp_bic704sp06/helpdata/en/05/d4463ceecc043ae10000000a114084/frameset.htm

How to find out relevant Infosources and Infocubes for Datasources

Hi All,
I am BIW beginner, have system installed BW 3.0B, I want to use r/3 Datasources and find out relevant Infosources and Infocubes, can any one help on this issue.
Thanks in Advance.

hi,
before going to install the infocube, infosource use follwing link to find the respective infosource belong to which infocube and chara, keyfigures.
then do the in stallion in bi content
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
regards
harikrishna N

How to avoide duplicacy when doing Full Update from Datasource to Infocube

Hi,
I am loading the data from 0HR_PA_OS_1 datasource to infocube 0PAOS_C01 infocube.Implementing the standard Business content.
The Plan is to load the data Monthly Once.
If by mistake, if the data is loaded more than once in a month the duplicates will happen in the infocube.I need to avoid this situation.
I have 2 ways to avoid.But am looking for some effective ways in which it handles the upload effectively.
1)Giving the Option of Overlapping request by means of process chain.
2) Give the selections for the calmonth at the infopackage selections tab.
The drawback of the 1st method is that its just like deleting the number of records existing and loading a new request.
Say for eg in the month of June i have loaded the data which is around 1000 records.
If am going to load the data for the month of July which is around 10,000 records, then with the 1st methos what i have mentioned i need to delate the previous request containing 1000 records and in effect doing a full update which includes 10,000 records of july + 1000 records of june.
I don't want to do this since as the months go by the number of records gets increased in a single request.
regarding the 2nd method am not quite sure how much it will be effective.
Please let me know any possible ways other than this.
Thanks,
Rajesh Janardanan

Hi ravi,
The problem with the 1st method is that as the day goes by the number of records in a single request increases which in turn will take quite a long time to get load and sometimes fails.
Is there any other way to handle the situation.
Thanks for the reponse,
Rajesh Janardanan

How to Map the Unit field in case of DSO and INFOCUBE

Dear Experts,
I have a issue ,Please help me to solve this
I have DSO as provider ,
And, i have to map transformations btw the Datasource and DSO.
In generic Data source, i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
and normal Quantity fields like KWMNG,OAUME(quantity related),OAUWE (value related).
In DSO data fields as Key figure info objects like 0Quantity (which have 0Unit as unit of measure) and some other key figures which have there respective unit of measure in info object definition.
So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
(How it will be for both DSO and Info cube is there any difference?)
Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

Navasamol ,
If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
And i have seen the Quantity fields and there respective unit fields are mapped directly to key figure info object
in case of Info cube . Its working fine .
If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
why this difference btw DSO and Info cube can any one explain me in detail.
Expecting your valuable suggestions.
Thanks & Regards,
Anjunath Naidu
Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

Error while loading data from DataSource to InfoCube/DSO through DTP

Hi Friends,
I am trying to load data from DataSource to InfoCube/DSO through DTP and getting the following error:
Exception in substep: Extraction completed
Processing terminated
Data package 1 / 30.04.2009 22:38:30 / Status 'Processed with Errors'
When i see the detail message it says:
Syntax error in routine "convert_to_applstru", line 25 of generated program"
I checked all my transformation and looks ok. I was able to load data earlier and i getting this error all of sudden. Does some one know what is this routine "convert_to_applstru" ?
Thanks,
Amit

Hi Arun,
Where do i see this generated program in RSRV. I dont see this in RSRV. Please guide me.
Thanks,
Amit

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Deltas on ODS and Infocube

Hi All,
i need information on how to do deltas on ods. i did two full uploads for ods 0fiar_o03 and then infocube. i need to do delta for this ods and cube. Please give me the steps to do delta for ods and infocube.
regards
raja

How are you doing the full load to ODS 0FIAR_O03. Are you giving any selection criteria.
In order start pulling Delta to the ODS you need to do a Full repair request or else you need to delete the full load requests from ODS and reload using Initialization.
Anways you are loading full load request in to the ODS, so it would be better to load Init Load next time and then start picking up deltas.
Delta to the Infocube is easily possible, by selecting Init in ODS after deleting all the data from the infocube. After that only the delta records from change log will be taken to the Cube from the ODS.
The delta to the cube can be performed irrespective of whether you performa Full load or Delta load in to the ODS.
Hope it helps!!!

DataSources and extract structures generation

Hi,
How would I generate the DataSources and extract structures using transaction LBWE? It seems that there are no push buttons to say to generate the DataSources and extract structures from LBWE? Would clicking on the DataSources and extract structures and click on the continue button be enough?
Thanks

I check from LBWE maintenance structure column, and the fields are there on the left hand side for the selection criteria.
How would I check "..fields you have enhaced are ready to use...." from LBWE.
From RSA6, I would doubleclick on the LIS datasource, and I see no enhanced fields and therefore could not see if they are hidden.
"Did you check in LBWE if your strcutures have the fields ready to use?" How would I do this? Maybe this is the problem.
Thanks
Message was edited by:
NoNoNo ...

Data load from to datasources to InfoCube via common Infosource in BI7

Hi all,
I need to load data from two diffent DataSource to one Infocube. Between this Infocube and DataSources there is one infosource common for both Datasources.
Between Infocube and Infosource there is one transformation and between each DataSource and that single InfoSource there are individual transformations.
I need to move data from each DataSource to infocube via InfoSource and through all the three transformations..
I tried to create a DTP to load data from one DS1 to InfoCube. It worked fine. But while creating DTP from other DS to Infocube I am not able to use the transformation which I have created from InfoSource to Infocube. Its getting bypassed and systems creates a new transformation between DS2 to infocube.
Can anybody help me for this???

Hello all,
Thanks for instant replies..
We need have Infosource as we need to have currency transformation, and multi-stage transformation...
My question is when I am creating a DTP for second DS it is bypassing the transformation which I have created between InofSource and DataSource...
It is following that that transformation only for first DS.. and not for the second one. Whereas, we need have that transformation (transformation between InfoSource and InfoCube) common for all DS which are loading data through InfoSource.

Selection of DataSource and InfoCube

Similar Messages

Maybe you are looking for