Selfjoin in Infoset and it's use?

Hi All,
I want to know what is a selfjion in Infoset,and when we need this particular join. Can someone help me with one example.
Regards,
G S Ramanjaneyulu.

I think that he was talking about C-like structures (Struct), rather than Struts, the framework.
Anyway, the way to mimic a C-Struct in Java is to make a class with all public members and no methods. There is no equivalent in Java of a Union, however, so if you have to deal with Structs that have Unions within them, you're out of luck. Also, I'm not sure how the sizes will map from a C Struct to a Java class. You'll probably have a mismatch.
Paul

Similar Messages

Unable to Access BI InfoSet in Crystal Reports using SAP Info sets driver

Hi,
I am looking to develop a report on top of BI InfoSet in Crystal Reports. However using the the SAP InfoSets driver I am only able to visualize 'Classic InfoSet' and 'SAP Query'. It does not show the option to import the regular InfoSet as a datasource. I am unable to access the InfoSet built by the db join on InfoCubes that is available in SAP BW System.
Can anybody help.
Thanks,
Amogh

Hi all,
i know this discussion is abaout 2 years old, but i faced a similar problem. I try to get access to the regular InfoSets (SQ02) within a direct connection between SAP and Crystal Reports. Which components and tools did i need to get a connection?
look here: http://scn.sap.com/thread/3365060
Thanx for your help!
Best Regards
David

What is Infoset and How to create

HI Experts
Can any one please explain me what is the purpose of INFOSET in BW
and how to create a info Set between A Info Object and Cube
Thanks

Dear bw user,
Check the below link
http://help.sap.com/saphelp_nw04s/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
Purpose is,
1.To join required data from basic InfoProviders
2.This allows building a relational BI data model with unified views for reporting (seeveral InfoProviders,but only one view). Therefore, we recommend keeping data in smaller, basic InfoProviders that can be flexibly joined for reporting purposes.
3. To allow BEx Reporting on a DataStore object without turning the BEx Reporting indicator on
4. To evaluate time dependencies (for example, join time dependent master data InfoObjects)
5. To be able to create self joins and left outer joins
Creatind in simple steps
Infoset is a Virtual Infoprovider.
Click on InfoProvider under modeling in RSA1 > Select InfoArea > right click Create Infoset > give name and description.
Select the ODS / Master Data Object or more than one ODS and maintain the link.
Infoset works on Join operation.
you can include Infocube if it is BI 7.
chk this link...
http://help.sap.com/saphelp_nw70/helpdata/en/a3/96663bd194a978e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
Aslo see this link contents
Creating InfoSets
Prerequisites
Make sure that the objects for which you want to define the InfoSet are active. Create any required InfoObjects that do not
exist already and activate them.
Instead of creating a new InfoSet, you can transfer one of the InfoSets that are delivered with SAP Business Content.
Procedure
1. You are in the InfoProvider tree of the Modeling function area in the Administrator Workbench.
Choose the Create InfoSet function from the context menu (right mouse-click) of the InfoArea in which you want to create an
InfoSet. You get to the Create InfoSet dialog box.
2. Type in the following information for your new InfoSet:
¡ technical name
¡ long description
¡ short description
3. In the Start with InfoProvider section, you determine which InfoProvider you want to use to start defining the InfoSet.
¡ Select one of the object types that the system offers you:
ODS Object
InfoObject
Choose an object.
If you want to choose an InfoObject, it must be a characteristic with master data. The system provides you with the
corresponding input help.
4. Choose Continue. You get to the Change InfoSet screen. For more information on editing InfoSets see Editing InfoSets.
When you create an InfoSet, the system generates a corresponding entry for this InfoSet in the subtree of the InfoArea. The
following functions are available from the context menu (right mouse-click) of this entry:
Change
Delete
Object overview
Editing InfoSets
Prerequisites
Before you can get to the screen where you edit InfoSets, the following prerequisites have to be met:
You have created a new InfoSet.
You have selected the Change function from the context menu of an InfoSet entry in the InfoProvider tree of the Modeling
function area in the Administrator Workbench.
You have called the InfoSet Builder transaction, and selected the Change function. You can find additional information
under Additional Functions in the InfoSet Builder .
Procedure
1. You are in the Change InfoSet screen.
Choose a layout for the InfoProvider tree:
InfoArea
InfoProviders Used
All ODS Objects
All InfoObjects
For more information on the screen layout, particularly the layout of the InfoProvider tree, see Screen Layout: Changing
InfoSets.
2. Use the function Where-Used List via AWB to determine which BW objects use the InfoSet that you have selected. You get to
the Administrator Workbench: Where-Used List screen. You are able to work out what would happen in the system if you made
changes to the InfoSet. This helps you to decide whether or not it is sensible to make these changes at this particular point
in time.
3. You define the InfoSet by inserting one or more InfoProviders into the join.
There are several ways of inserting an InfoProvider into the join control:
¡ From the InfoProvider tree:
§ In the InfoProvider tree, double-click on the entry that corresponds to the InfoProvider that you want to add to the join
control.
§ Use the drag-and-drop function to move the InfoProvider into position.
¡ Choose the Add InfoProvider function, to add a particular ODS object or a particular InfoObject independently of the
current layout of the InfoProvider tree. You get to the dialog box of the same name. Enter the data that the system asks you
for.
If you know the technical name of the InfoProvider that you want to add, this method is quicker than switching the layout of
the InfoProvider tree.
When this function is complete, the InfoProvider that you selected is displayed in the join control. For more information on
the structure of the join control, see Join Control.
4. Define the join conditions. For more information see Defining Join Conditions.
5. You can get general information such as object version, date created and date changed via Goto ® Global Settings. You can
also set the indicator Most recent Reporting for InfoObjects from here. You can find additional information under Most recent
Reporting for InfoObjects.
6. Via the button Documents, which appears on the pushbutton bar, you can access document editing for this InfoSet.
7. You can use Check to check the correctness of the InfoSet definition. The log display is shown in the screen area under
the join control.
8. Save the InfoSet. The log display is shown in the screen area under the join control.
9. Activate the InfoSet. After activation, the system executes the checks. The result of the activation is displayed in the
log in the screen area under the join control.
Additional Functions in the InfoSet Builder
You can also use transaction RSISET to call up the InfoSet Builder when you want to edit an InfoSet. Select the InfoSet that
you want to edit. Value help is available for this. Additional functions are also available to help you edit and manage your
InfoSet.
Compare
You use this function from the main menu to check if the InfoProviders used in the InfoSet have been changed and the InfoSet
needs to be adjusted as a result. For more information, see Matching InfoSets.
Jump to object maintenance
You use the InfoObjects and ODS Objects functions to jump to the maintenance screen for the InfoProviders included in the
InfoSet definition.
Info functions
There are various info functions on the status of the InfoSets:
The Object Catalog Entry
The log display for the save, activate, and delete runs of the InfoSet.
Display in tree
You use this function to display in a tree structure all the properties of the A version (active) of the selected InfoSet.
Header data
InfoProvider and its fields
On condition
Wherecondition
The display is empty, if no active version is available.
Version comparison
You use this function to compare the following InfoSet versions:
The active (A version) and modified (M version) versions of an InfoSet
The active (A version) and content (D version) versions of an InfoSet
The modified (M version) and content (D version) versions of an InfoSet
The Display InfoSet screen appears. Depending on which option you choose, the system displays either all of the differences
between the two versions of the selected InfoSet or all of the properties of both versions in a tree structure.
Transport connection using AWB
You use this function to transport an InfoSet into another system.
The Administrator Workbench: Transport Connection screen appears.
The system has already collected all the BW objects that are needed to guarantee the consistency of the target system.
InfoSet data display
You use this function to access the data target browser. If you have already loaded data into the InfoProviders included in
the InfoSet, you can display this data.
Delete
You use this function to delete an existing InfoSet.
Copy
You use this function to copy an existing InfoSet and, if necessary, edit it further.
Show/hide technical names
You can use this function to show alias names for fields. These alias names are necessary in InfoSets, for example to be able
to map self joins. Field alias names start with F, followed by a five-digit number.
Defining Join Conditions
Use
A join condition determines the combination of records from the individual objects that are included in the resulting set.
Before an InfoSet can be activated, the join conditions have to be defined in such a way (as equal join condition) that all
the available objects are connected to one another either directly or indirectly.
Usually, however, only rows containing a common InfoObject or rows containing InfoObjects that share the same basic
characteristic are connected to one another.
Connect tables T1 and T2 using a join and set as a join condition that the F1 field from T1 must have the same value as F2
from T2. For a record from table T1, the system determines all records from T2 for which F2(T2) = F1(T1) is true. In
principle, as many records from T2 can be found as required. If one or more records are found, the corresponding number of
records is included in the result set, whereby the fields from T1 contain the values from the record from T1 under
consideration, and the fields from T2 contain the values of the records found from T2.
Procedure
There are various ways of defining join conditions:
Using a mouse-click
Position the cursor over a row in an InfoObject. Press the left mouse-button and, keeping the left mouse-button pressed down,
trace a line between this row and a row in another object. Providing that the join condition between the two rows that you
have indicated is a valid join condition, the system confirms the join condition by displaying a connecting line between the
two rows.
Using the Link Maintenance pushbutton
You get to the Link Maintenance dialog box.
In a tree structure on the left-hand side of the screen, all of the InfoProviders that are already included in the join are
displayed along with their fields or attributes. If you double-click on one of these fields or attributes, the system
displays on the right-hand side of the screen all of the fields or attributes with which you are able to create a join
condition.
In the Selection column, set one or more of the indicators for the fields or attributes for which you want to create a join
condition. The system generates valid join conditions between the fields or attributes that you specify.
You use the Delete Links pushbutton to undo all of the join conditions.
You use the All Characteristics or the Basic Characteristics Only pushbutton to choose between the corresponding display
variants.
We recommend that you use the Basic Characteristics Only option. The All Characteristics setting displays all of the
technical options involved in a join. If you are not able to find a join condition on the basic characteristic level, then
the All Characteristics setting is useful, but this is an exceptional case.
When you have finished making your settings, click on the Continue icon.
We recommend this method, because the system searches for all the possible join conditions for any field or attribute that
the user specifies, ensuring that the join conditions are defined without errors.
Using the Context Menu Left Outer Join Inner Join
Usually inner-join operators connect all the objects in a join to one another. You can also connect each object with any of
the many other objects by using a left outer join operator.
You can find additional information about usage and special features under Left Outer Join.
If you want to use a left-outer join operator to connect an object, select the object and choose the corresponding function
from the context menu.
The system displays all of the valid join conditions that originate from this object. The connecting lines that represent
these join conditions are labeled as Left Outer Join . InfoProviders, on which a left outer join condition is affixed, are
differentiated by color from the InfoProviders that are connected using an inner join operator.
If you used a left outer join operator to connect two objects, you have to make sure that all on conditions are linked except
for these two objects with the formulation of join conditions.
Note that you cannot add an object, which you have already connected by using the left outer join operator, to another
object.
If you want to use an inner-join operator instead of the left-outer join operator, select the object that you want to
connect, and choose the Inner Join option from the context menu. Again the system displays all the valid join conditions that
originate from this object, and labels the connecting lines accordingly.
Result
Once the join conditions have been defined in such a way as to connect all the available objects to one another, either
directly or indirectly, the InfoSet is ready to be activated.
You click on the Check pushbutton in the pushbutton toolbar to find out if these preconditions for the activation have been
met.
For objects that are joined by a left-outer join operator, there is one extra condition that has to be met, namely that all
the other objects have to be connected to one another either directly or indirectly.
http://help.sap.com/saphelp_erp2004/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a3/96663bd194a978e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
Hope itr helps
Regards
Bala
Also

When do you go for classifical infoset and when for infosets?

hi all,
Can anyone tell me when shall we go for creating classical infosets and when shall we opt for infosets. explain me with an real time scenario.
And can u tell me the steps invovled in creating classical infosets and creating infosets.
thanxs in advance
regds
hari

Hi,
infosets are nothing but...it is a link between info objects and data targets(ods,cube)...if we do these link between them only....we can get the report in BEX analyzer...where use the infoset name to get reports...same llike ...to get the report....we can use multiprovider also...but in infoset.. link being the common datas(link between the common primary dats)...in multiprovider...can view all datas in report..there is no links between common datas....here ods is overritable..
further queries...go through this links......
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
SAP® BW: A Step-by-Step Guide
http://safari.oreilly.com/0201703661/pref01
Check these,
https://www.sdn.sap.com:443/irj/sdn/thread?threadid=163772&messageid=1837694
https://www.sdn.sap.com:443/irj/sdn/thread?threadid=199410&messageid=2217326
https://www.sdn.sap.com:443/irj/sdn/thread?threadid=189150&messageid=2113030
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d2/cb43b2455611d189710000e8322d00/frameset.htm
Thank you
DST

What is an infoset and infoset query?

hello can anyone tell me about
infoset and infoset query.

Infoset is based on Joins. Infocube, DSO and infoobject can be used to make infoset.
How to Create Infoset Query (SAP Query)
Steps on how to proceed to create a Query:
ADHOC QUERY
A query can be created to extract information from master records i.e Infotypes. For example, by creating a query , the data relating to an employee contained in various Infotypes can be extracted.
Proceedure :
Decide on the various Infotypes we want to make the query. Decide on the area where we want to query i.e Global area or Standard area. Standard area is client specific and globel area will include all clients.
Menu : HR PM Admn - Information System - Adhoc Query
Select area standard and select the user group already created
Creation of new query :
TC SQ03 - Select Environment Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving
TC SQ02 - Enter name of the Infoset Create enter name of Infoset - Data source -- > Table join by basis table give name of table e.g pa0000 - Enter - Click on insert table if we want to include more tables give name of table one by one and after finishing, place cursor on the joining lines and right click to delete unwanted relationships - check - and go back - field groups - include all table fields - click on generate button   - go out
TC SQ03 - Select user group -   eg. Payroll
Infoset - Enter name of newly created Infoset
Assign users and Infosets - Assign infosets - put tick on payroll - save and go back
TC PAAH - Expand the nodes and put tick on relevant fields depending upon necessity
Save the query by giving the same name as infoset for easyness.
If this answer helps, pls assign points.
Thanx in advance.

What is infoset and bw statistic cubes?

hi experts can u give me some idea about the following topics.
1) what is Infoset and why it is used?
2) what are Bw statistic cubes and why are they used?
thanks bye

Hi
Infoset is based on Joins. Infocube, DSO and infoobject can be used to make infoset.
How to Create Infoset Query (SAP Query)
Steps on how to proceed to create a Query:
ADHOC QUERY
A query can be created to extract information from master records i.e Infotypes. For example, by creating a query , the data relating to an employee contained in various Infotypes can be extracted.
Proceedure :
Decide on the various Infotypes we want to make the query. Decide on the area where we want to query i.e Global area or Standard area. Standard area is client specific and globel area will include all clients.
Menu : HR ? PM ? Admn - Information System - Adhoc Query
Select area standard and select the user group already created
Creation of new query :
TC SQ03 - Select Environment ? Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving
TC SQ02 - Enter name of the Infoset ? Create ? enter name of Infoset - Data source -- > Table join by basis table ? give name of table e.g pa0000 - Enter - Click on insert table if we want to include more tables ? give name of table one by one and after finishing, place cursor on the joining lines and right click to delete unwanted relationships - check - and go back - field groups - include all table fields - click on generate button - go out
TC SQ03 - Select user group - eg. Payroll
Infoset - Enter name of newly created Infoset
Assign users and Infosets - Assign infosets - put tick on payroll - save and go back
TC PAAH - Expand the nodes and put tick on relevant fields depending upon necessity
Save the query by giving the same name as infoset for easyness.
Limitations of Infoset query:
1)Atleast one common infoboject should be present in all the data targets.
2)In BI 7.0 you can include the infocubes also at infoset,but the limitation is max two number of Cubes.
3)According to some join condition only you have to buidl the infoset.
http://help.sap.com/saphelp_nw2004s/helpdata/en/67/7e4b3eaf72561ee10000000a114084/content.htm
Details related to infoset query.
http://help.sap.com/saphelp_nw04/helpdata/en/d2/cb43b2455611d189710000e8322d00/frameset.htm
Regarding infosets :
http://help.sap.com/saphelp_nw04s/helpdata/en/ad/2225391d4f000be10000000a114084/frameset.htm
See here for BW statisticss:
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/content.htm
BW and BIW
Re: SAP BW in relation with....??
Bi stands for business intelligence and Biw stands for business information warehouse. It is basically the same thing. YOu can find more info in previous posts.
check this link out..
BW & BI
**BI vs biw
Re: BW & BI
Hope it solves u issue
regards
gaurav

Difference between InfoSet and Multiprovider

Hello Gurus,
Could someone tell me the difference between an InfoSet and a Multiprovider? And in what occasions we should use these?
Thank you.
DM

Hi David,
1. Infoset and Multi provider physically doesn't have any data.
2. Where they are used?
Ans: they are used for reporting.
3. Why they are used?
Ans: when we want to see a report on a data coming from two or more different tables then we go for infoset or multiprovider.
Example: suppose if there are 2 tables A which contains ( customer id, customer name..etc )
and table B contains ( customer id, material id, material name..etc )
-> if we want a report on cust id , cust name , mat id , mat name in a single report then we go for MULTIPROVIDER ( since multi provider can fetches the data from two fileds )
-> if we want a report on cust id from both tables and cust name from table A then we can go for INFOSET ( since info set fetches the data which is common in both tables and the other data from any table as per req. by using left outer join condition )
So we can go for any in this as per our requirement.
One more thing is that INFOSET can be done on Info Cube and DSO only.
MULTIPROVIDER can be done on data source, PSA , DSO, data target..etc
hope this helps u, and let me know if u need any further info.
Thanks in advance
Sai Chand.

Deletion of Scheduling Agreement and Delivery Schedule using BAPI

Hi SAP MM Gurus,
Please assist in inquiry below:
My scenario is that I am trying to delete delivery schedules and scheduling lines using BAPIs. I have no issues when there is no GR made yet for the delivery schedules. The error arises when there are already existing Goods Receipts and Invoices for the schedule line that I wish to delete
When using the BAPIs (either BAPI_SAG_CHANGE or BAPI_SCHEDULE_MAINTAIN), I set the deletion indicator to "L" and set to X all change relevant fields (i.e. DELETION_INDX). However, whenever I execute it, I get the error message 06088. The funny thing is both the Quantities and the delivered quantities that are normally populated are left blank.
For example:
Normal error for 06088:
Quantity 100.0 smaller than quantity delivered 179.0
Error using BAPI with deletion indicator:
Quantity smaller than quantity delivered
Is this a bug of the BAPI? or am I just missing some settings?
Your immediate response is appreciated
Regards,
DeLo

Hi,
Please find the below link check the setting are correct or not
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02cb00a-bfb4-2c10-98aa-e33e7f64ba28?quicklink=index&overridelayout=true
Reagrds,
Pramod

I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

Multiple displays with 15"and 19"monitor using a VGA splitter on my Mac Pro

Hi, so I have a brand spanking new Mac Pro and have been using a cheap, basic 15" monitor with it. As I'm doing lots of Edit/graphics work I've just purchased a new monitor, it's a 19" Acer flatscreen. Now I'm hoping to work the same display across both monitors, so I can set up my preview window on the 15" and do my work on the 19" screen.
The Mac has two DVI output sockets in the back, both monitors are VGA but I only have one DVI to VGA adaptor. Though I do have a VGA splitter! So I've tried going from one DVI socket to VGA, then put the splitter into that and then each monitor into each split socket, if that makes sense? I now have the same display on each screen i.e. while I'm typing this I'm looking at it twice but I want to see it once over two screens, how do I adjust this, there's no option in display settings?
Is it simply that I need to buy another DVI to VGA adaptor and use the other port? Just looking to save myself a tenner, that's all!
Thanks!
Alex

Yep, you're right! Thanks, working now, very useful.

IPad2 and a new MacBook running Lion, Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my Hotmail Id for my Apple Id and use it for iTunes, iCloud

I have an iPad2 and a new MacBook running Mountain Lion. Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my current Hotmail Id for my Apple Id for iTunes, iCloud.
Note, I will use both Hotmail and iCloud eMail.

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

How to capture an image and save it using action script

Hello,
I need to know if is posible to capture an image or a screen region and save it using action scrip.
Somebody know how to do it ??
Thanks

you can capture an image using the bitmapdata class and getPixel(). you can then save that to a bitmap using server-side code like php.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

Hi Mozilla Team, I installed Mozilla Aurora and have been using it for 2 months.Everytime I launch Aurora it launches it stays not responding for a minute or so. This happens everytime I want to use the browser. how to resolve it. Thanks Anurag

Mozilla Aurora is not responding

You can use the Tab key to select a search engine on the bottom bar and press Enter to use the search engine to do the search.
*https://support.mozilla.org/kb/Search+bar
In the current Firefox 34 release there is a new "one-off" search bar.
This search bar doesn't show the name of the search engine and a logo.
You can type one letter to make a drop-down list appear where you can see suggestions and see the used search engine and that also has bar at the bottom where you can select other search engines that are enabled via the Search tab in Options/Preferences.
You can use the Tab key to select one of the other available search engines and press the Enter key to search with the selected search engine.
Click the search engine icon and click "Change Search Settings" to open the Search tab in Options/Preferences (positioned between Tabs and Content) to select the default search engine and select which search engines to show in the search bar drop-down list that opens when you start typing search terms.

Selfjoin in Infoset and it's use?

Similar Messages

Maybe you are looking for