Send DTMF digits with CVP App

Dears,
I would like to know if is possible send data as DTMF Digits through an CVP application. We have an UCCE infraestructure installed on our customer, but they have a new project that will need transfer the call and data for an Avaya System. Is It possible? How can I do this?
Best regards!
Alessandro

Addition to the UUI, You can also have a look at TakeBack-and-Transfer Section in the CVP Srnd which talks about your requirement, Below is the snippet i copied from the CVP SRND.
TNT (also known as Transfer Connect) is a transfer mechanism offered by some U.S. PSTN service
providers (such as AT&T and Verizon). With this transfer method, inband DTMF tones are outpulsed to
the PSTN by Unified CVP. These inband tones act as a signaling mechanism to the PSTN to request a
transfer to be completed. A typical DTMF sequence is *8xxxx, where xxxx represents a new routing label
that the PSTN understands. Upon detection of a TNT DTMF sequence, the PSTN drops the call leg to
the ingress gateway port and then re-routes the caller to a new PSTN location (such as a TDM ACD
location).
This behavior might be necessary for a customer with existing ACD site(s) but no IVR, who wants to
use Unified CVP initially as just an IVR. Over time, the customer might want to transition agents from
the TDM ACD(s) to Cisco Unified CCE and use Unified CVP as an IVR, queueing point, and transfer
pivot point (thus eliminating the need for TNT services).
In Unified CVP deployments with the ICM, the DTMF routing label outpulsed could have been a Unified
ICM translation routing label to enable passing of call data to another Unified ICM peripheral (such as
a TDM ACD). In this scenario, Unified CVP views the call as completed, and Unified CVP call control
is ended. With TNT, if the transfer to the termination point fails, there is nothing Unified CVP can do to
re-route the call. While some TNT services do have the ability to re-route the call back to Unified CVP,
Unified CVP sees this call as a new call.
Regards,
Senthil

Similar Messages

  • Sending Yahoo Mail With Mail App DOA?

    I think with Yahoo's new DMARC rules it renders our mail app useless. 
    Email service providers can't send to / from Yahoo addresses
    Yahoo recently changed our DMARC policy to proactively protect our users from increasing email forgery spam. This is an important step to secure our users’ email identities from being used by unauthorized senders.  If you're an email service provider (ESP), here's information about why your messages will be rejected due to failed authentication.
    Why are my emails bouncing?
    Yahoo recently updated the DMARC record with "p=reject" for the "yahoo.com" domain.
    This means all DMARC compliant mail receivers (including Yahoo, Hotmail, and Gmail) are now bouncing emails sent as "@yahoo.com" addresses that aren't sent through Yahoo servers. Any messages without a proper Domain Keys Identified Mail (DKIM) signature or Sender Policy Framework (SPF) alignment will be rejected.
    ESPs who use their customers' "@yahoo.com" address as the "From" address to send messages are impacted by this change.
    Can someone more tech proficient translate?

    iwaveatcows,
    At this time, there is no setting to disable the automatic inclusion of the original message. If you would like to see that feature in the future, you can submit feedback at:
    http://www.apple.com/feedback/iphone.html
    If you do not want the original message included as part of your reply, you can manually delete the part you do not want included before you send your message.
    Hope this helps,
    Jennifer B.

  • Send/Receive Difficulties with Mail.app/.Mac Webmail

    I had sent a short test message to myself, using a .Mac account on Mail.app, to see if I could duplicate an error reported by another user. That message 'black holed' itself, leading to the following series of similar messages and results. For purposes of explanation:
    a) messages were sent on the same account from either Mail.app or .Mac Webmail
    b) "OK" means that messages showed up normally in Sent boxes and in Inboxes in both locations.
    c) "Black Hole" means that messages showed up in Sent boxes in both locations, but showed up nowhere else. Ever.
    d) "Junk" means that the message was sent, showed up in Sent boxes, but was slotted into Mail.app's Junk ƒ. In all cases, those messages were then moved to the Inbox and marked as "Not Junk".
    Message results:
    #1 — from Mail.app — Black hole
    #2 — from Mail.app — Junk
    #3 — from Mail.app — Black hole
    #4 — from Webmail — Junk
    #5 — from Webmail — Black hole
    #6 — from Mail.app — Junk
    #7 — from Mail.app — Junk
    #8 — from Webmail — OK
    #9 — from Mail.app — Junk
    #10— from Webmail — OK
    #11— from Mail.app — OK
    Two questions or concerns:
    a) 3 of 11 messages, from both Mail.app and Webmail, simply disappeared. They have message ID's, are present in the sent folders, but never showed up.
    b) Mail.app's Junk filtering insisted, for a long time, on slotting those incoming message to the Junk filter (and still does, btw, on an intermittent basis). No changes have been made to Junk preferences or setups and this had not occurred in the past.
    Would appreciate some of the mail gurus taking a look at this and seeing if they can find any common threads or causes. There may be more than one thing in play here, of course. TIA for any assistance.

    I'm curious about the Junk (result "d" & question "b") aspects of your tests. Can you confirm that:
    1) You do not have any custom rules that use the "Message is Junk Mail" test -- IOW, that the Junk Filter is the only rule that is using this test?
    2) The messages to yourself all were sent to a "self" address that is in your Address Book app (typically, but not necessarily, the "me" card)?
    3) For all/some result "d" messages they were marked as Junk?
    I ask because I have intermittently seen Mail apparently ignore other default tests in the Junk Filter (particularly "Sender is not in my Address Book" when the sender is me) & evaluate the 'junkiness' of messages just on the "Message is Junk Mail" test. It has been difficult for me to evaluate David's methods for correcting this in my case because of the extremely intermittent nature of the behavior: in some cases new "me-to-me" received messages are immediately marked as Junk after removing the files David indicates, in others a few weeks later one or two are while others aren't.
    In every case (so far) that some are identified as junk, training with the "Not Junk" button on a couple of messages seems to end the occurrences, as if the LSM filter has to learn they are not junk independently of the other tests.
    Because of this, I would appreciate your posting to this thread any related results that occur long after you try David's fix(es), if you do try them, even if they are rare or inconsistent.
    Thanks.

  • Send DTMF with SIP INFO (c2600) configuration question

    I have a cisco 2600 with VIC-2FXS port as VOIP Gateway, connecting to SIP Server to receive SIP Incoming calls. I am able to receive call and the vocie has been pass through both way; and I would like the 2600 send DTMF as SIP info but was not able to do so. I have ios 12.3, and from this configuration guide http://www.cisco.com/en/US/docs/ios/12_3/sip/configuration/guide/chapter8.html#wp1048824 , it does not require any config for SIP info. I must missing something here, please advice. Thanks.
    The config is following -
    version 12.3
    service timestamps debug uptime
    service timestamps log uptime
    no service password-encryption
    hostname abc
    boot-start-marker
    boot-end-marker
    enable secret 5 xx
    enable password xx
    memory-size iomem 10
    no aaa new-model
    ip subnet-zero
    no ip routing
    no ip cef
    interface Ethernet0/0
    ip address 192.168.1.15 255.255.255.0
    no ip route-cache
    full-duplex
    no ip http server
    ip classless
    voice-port 1/0/0
    voice-port 1/0/1
    voice-port 1/1/0
    voice-port 1/1/1
    dial-peer voice 1 pots
    destination-pattern 1000
    port 1/1/0
    dial-peer voice 2 pots
    destination-pattern 1001
    port 1/1/1
    dial-peer voice 10 voip
    destination-pattern 1.T
    session protocol sipv2
    session target ipv4:192.168.1.224:5061
    session transport udp
    codec g711ulaw
    dial-peer voice 3 pots
    destination-pattern 1100
    port 1/0/0
    dial-peer voice 4 pots
    destination-pattern 1101
    port 1/0/1
    line con 0
    line aux 0
    line vty 0 4
    login
    end

    I tried to set it, and for IOS 12.3(26) - the latest for 2610 - which dose not have that option. I use dtmf-relay rtp-nte instead; but it did not send RFC2833 event. From ethereal, no OOB events. It seems that the config I have does not have OOB DTMF enable; I compare the config I have with other examples but can not found anything wrong. Any suggestion, and what debug message I should enable, that may help to identify the issue.
    Thanks.
    voice class codec 1
    codec preference 1 g729r8
    codec preference 2 g711ulaw
    interface Ethernet0/0
    ip address 192.168.1.15 255.255.255.0
    full-duplex
    voice-port 1/0/0
    voice-port 1/0/1
    voice-port 1/1/0
    voice-port 1/1/1
    dial-peer voice 1 pots
    destination-pattern 1000
    port 1/1/0
    dial-peer voice 2 pots
    destination-pattern 1001
    port 1/1/1
    dial-peer voice 10 voip
    description Outbound Calls
    destination-pattern 1.T
    voice-class codec 1
    session protocol sipv2
    session target ipv4:192.168.1.250
    session transport udp
    dtmf-relay rtp-nte
    no vad
    dial-peer voice 3 pots
    destination-pattern 1100
    port 1/0/0
    dial-peer voice 4 pots
    destination-pattern 1101
    port 1/0/1
    dial-peer voice 100 pots
    destination-pattern 8...
    port 1/1/0
    forward-digits 3
    dial-peer voice 20 voip
    description Incoming calls from PBX
    incoming called-number .T
    voice-class codec 1
    session protocol sipv2
    session target ipv4:192.168.1.250
    dtmf-relay rtp-nte
    no vad

  • I would like to send an email with a link to an app I found in the app store.  How do I do that?

    I would like to send an email with a link to an app I found on the App Store.   How can I do that?

    Can you help me with this one. I cannot seem to add an active link to a web site to an email. In windows I have the option to "add a link" and it will show up as a hot link that can be clicked on to open the site.
    Thanks

  • Sending an Email from the app along with table data

    Hi All,
    I would like to send an email from my app. I tried to put in the field attachment SQL this query: select * from Table_Name where id = (select max(id) from Table_Name) but it did not work. It showed me this error:
    1 error has occurred
    Wrong number of columns selected in the SQL query. See Help of attribute for details.
    I would like to send an email every time the user insert a row with that row in the email... How can I do that?
    Thank You.

    What I would suggest is the following:
    Build an After Insert Trigger on the table in question. In this trigger build a string with ALL the columns that are being inserted into the table. Then you will need to build some local variable to submit your mail. You will send your e-mail via UTIL_SMTP mail, since you may NOT always being in an APEX application when the table is updated..
    Ask away if you have more questions..
    Thank you,
    Tony Miller
    Webster, TX
    I am a Ranger! We walk in the dark places no others will enter! We stand on the bridge and no one may pass! We live for the One, we die for the One!
    If this question is answered, please mark the thread as closed and assign points where earned..

  • Send bulk mail in oracle apps 11i with pdf/Xls attachment

    hi,
    I have a task how can i send bulk emails in one go ( aprrox 150-200 emails in one go) in oaracle apps 11 with attachment pdf/xls
    thanks

    Duplicate post.
    how to send bulk mail in oracle apps 11i with pdf/Xls attachment
    Re: how to send bulk mail in oracle apps 11i with pdf/Xls attachment

  • I can't send mail (Gmail) with App Mail on IOS 7

    Hi,
    After create Google account on my ipad, I can receive my gmail mails but I can't send mail with "Mail App".
    With the Gmail App I can receive and sent mails.
    I wish send mail with App Mail, what should I do?
    Thanks
    PS : Sorry for my bad english.

    You have good English.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • "Not authorized to send to this .Mac Group" only with Mail.app

    Hi all,
    I have been having this problem for a while now. I am trying to post a message on a .Mac group that I own. I use my normal .Mac email address, the one that I chose for posting in my Group Preferences.
    When I try to send the email from Mail.app, I receive an error "This email address is not authorized to send to this .Mac Group."
    However, when I send it using the webmail, with the same email address, it works...
    Any ideas?!
    Thanks in advance

    I guess groups are dead, now.

  • Hello can some body help me on my icloud app.i cannot send an email with iCloud

    Hello
    can some body help me on my icloud app.i cannot send an email with iCloud
    excuse me my english

    Hello
    thanks for your prompt response
    yes i defined an account for icloud
    Regards
    Faisal Djama

  • [iPad Mini 1st Gen.] Can't send E-Mails with the normal "Mail" App

    Hi,
    I can't send E-Mails with the normal E-Mail App, it works only with another Mail App, but then I can't send pictures. Maybe my new router is the cause, but it works with my iPhone 5, only with my iPad mini it doesn't work.Well, how I can solve the problem?
    Sorry for my bad English.
    Many Greetings from Germany.

    Hi,
    i can't change the iCloud SMTP Server settings for outgoing E-Mails.It isn't possible to make these "How to" (or how i can call it?) and the moves before i have already done and the issue haven't solved. I think my iPad mini is to old....
    Many greetings,
    xbdsmallwork
    Edit: I have a iCloud Mail Account.

  • Recording option with CVP

    Hi
    I want to develop application either with Call Studio or micro apps to do recording such as announcement in .wav format to update the script prompts.
    Any idea if I could achieve that with CVP , I dont has ASR/TTS platform.
    Cheers
    Shahid

    Sure, the Call Studio element Record can do this - Record with Confirm.
    Record with FTP can send it to an FTP server, which if it constructed correctly, can be placing the file in the right place on a Media Store. You need to make sure the lifetime on the web server is set to immediately expire otherwise the cache on the gateway will hold a copy of the old file. This leads to poor gateway performance, as it can't use the cache. This is a problem you have to find a solution for.
    Another problem is that if you have two Media Stores - as most do - you need to find a way to update both of them. When I did this I used the standard Record element and wrote a custom Java class to FTP the file somewhere. After the user confirms the recording is suitable, I use the custom FTP element to send the file to first one Media Store, and then use it again to send it to the other Media Store.
    Regards,
    Geoff

  • DTMF Digits Dialing issue on 8831 Conference Phone

    Hi,
    anyone had a DTMF digits dialing issue on Cisco 8831 conference phone. If I have to join any external conference bridge, when I trying dial my user id and  password its not sending the digit i am dialing. Conference bridge is saying wrong PIN dialed.Please suggest

    Hi
    Actually this problem was on SIP call,User was dialing shortcode and it was going through their SIP trunk, raised case with TAC and they replied "its expected behavior and documented in the release guides, we do not find any defects filed to fix this. we are hoping, this behavioral change would be included in the future releases"
    version of call manager  9.1.2.11900-12
    current firmware running on the phone-SIP 9.3.3.5

  • Code snippet to send email from an iPhone App

    Hi,
    I have tried to look under the SDK documentation but have not found any pointer. I know how to use Mail.app to send email on a desktop app but how do I do this from iPhone.
    Thanks!

    Sending email from the iPhone is as simple at setting up the account in Mail on the phone.
    Attachments are a different story. The only attachments that can be sent from the iPhone are photos taken with the camera, safari links, notes and you tube links. Each of these attachments are initiated from their parent program (photos, safari, notes, youtube, etc) rather than Mail itself.
    What attachment are you trying to send?

  • Hi I just got a new macbook pro i7 processor and i am trying to send a email with  iPhoto and it comes back with The Email sever didn't recognise your username /password combination I'm with btyahoo  thats my I S P

    hi i just got a apple macbook pro on sat... it is the i7 processor 13inch.. the thing is i have been trying to send a picture with iphoto but it just comes back with the sever didn't recognise my Email/password combination

    Go to the Mac App Store main page and click on Support under Quick Links.
    (82704)

Maybe you are looking for

  • Cannot delete music from my new iPod nano

    I have just bought an iPod nano 4GB and when I first got it I copied over almost a full 4GB of music to it. I have now ripped a lot of my cds in itunes and have about 20GB of music so I cannot copy the entire library, therefore I would like to copy e

  • Material valuation based on FIFO

    Hi, Presently we are valuating raw materials with moving average price (V). Material is not managed in batches. For few of our raw materials price changes too often. So want to consume the material based on the value with which it was purchased. Is i

  • Context Mapping and data binding

    Hi, Please explain about the context mapping and data dinding and also differences Thank's & Regard's. Sri

  • Some apps i bought wont download

    I bought a few apps that after a few seconds of download say, unable to download file is corrupt.

  • Problem about auto backup of composing mail

    I am using Leopard Mail with Gmail IMAP setting When composing mail, Mail automatically makes backup of the mail about every 30 seconds. Therefore I have to delete more than thirty useless "backups" after I sent the mail. Any similar case here? How c