Send midi from software sequencer to midi out

I am quite new to logic and sometimes am confused about the midi routing...
I have a sequencer (Reaktor) in a software instrument track, from wich I want to send midi to my hardware synthesiser. (sometimes maby recording the midi coming out from reaktor to a midi track)
I have the output channel in Reaktor set to the same as the receive channel of my synthesiser. (everything works fine in Reaktor standalone)
But I was not able to do it from logic ...
I tried option-clic on the triangle in the track in the environnement, to draw a beautiful cable to the corresponding midi channel of my instrument track...
And a few other things...
My synthesiser still recieve nothing.
If anyone can show me the road, i will be very grateful.
Thanks

Here is thread from the Reaktor Forum:
http://www.native-instruments.com:80/forum/showthread.php?t=63504&highlight=Midi +Output
some Ensembles don't transmit Midi to the Outside world - this one does:
http://www.native-instruments.com/index.php?id=userlibrary&type=0&ulbr=1&plview= detail&patchid=6669

Similar Messages

When i send a imessage it sends it from the number that was on the sim before i transfered my number how do i change it to my number?

when i send a imessage it sends it from the number that was on the sim before i transfered my number how do i change it to my number?
ive tried to change it in message settings but the number is grey so im unable to de-select it ?
any ideas?
cheers Dan

Hello joinerdan,
It sounds like you are unable to change the phone number that Messages is sending messages from because it is grayed out. I recommend the steps outlined in the following article named:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Unlink a phone number
To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages. If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
Note: If you no longer have access to the iPhone that is using the number you want to remove, reset your Apple ID password.
Thank you for using Apple Support Communities.
All the best,
Sterling

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

When running a "stand-alone" APP..how do I send midi from Logic?

Hi all,
When running a "stand-alone" APP..how do I send midi from Logic?.....Please no IAC stuff it doesn't work.......thanx
SvK

using IAC here no problems. works very well.
you can host your au's in another app such as soundflower or au lab, but you are still going to need to get it to hear midi. you can use physical midi ports with something like a MTP midi interface, and getting the midi by routing the out of one port to the in of another (midi loop) but you have to be careful logic doesn't listen to the same midi signal or everything will jam up (midi feedback).

In Logic Pro 9, how many midi controlled software instruments do you get...?

In Logic Pro 9, how many midi controlled software instruments do you get and is there possibility to download more as it says 40 on the programs info on the Mac Store, as i intend to compose on it but with only 40 instruments it's not really worth it.
So i was just wondering whether it let you download more for free.
Thanks for reading
~Matt

Yes: I too am interested in the software instruments available in Logic Pro: one has to be a bit wary of the jam packs because there don't seem to be many solo instruments included. But I looked at the Logic screen in an Apple store the other day, and it worked like GarageBand in
this respect: you created a new track choosing the software instrument option and a whole lot of instruments came
up in a column on the right: lots of solo wind instruments, plenty of keyboards and guitars of course and not very many solo strings, only one violin, in the world music subsection under Irish fiddle. Yehudi Menuhin
where are you when we need you?
What I've been trying to find out is which part of the purchase does this long list of software instruments arrive with, because it's basically the only reason
I'm interested - I get on fine with gb but it
Just hasn't got enough instruments, and as I say the jam packs don't seem
to resolve this ? Or do they? Could someone please help
me with this?

Logic Environment - how do I get it to recive MIDI from my keyboard

Hi
I had this set up in Logic 6 by a friend. I've just updated to LP 8 and it's overwritten the setup and just can't get it it to recognise my MIDI keyboard.
I'm sure it's something simple. I'm not bright on computer stuff.
The sequencer input is working as the "keyboard" icon will generate sound. I use an Alesis QS6 (16 channels) as an input keyboard linking through an a62m interface (all works fine for audio and drivers are okay), but I have no idea (in spite of reading the manual several tims) as to how to connect this all up in Environment.
It's just a single keyboard in, so any thoughts would be very welcome.
Thanks
Jonathan

To receive MIDI, you do not have to do anything in the environment. Logic will see MIDI from any MIDI input that OSX knows about and channels it to the active track.
One thing to check though - go to the environment, Click&Ports layer, and locate the "Physical Input" and "Sequencer Thru" objects. They should be connected together. In any case, highlight them both and delete them - do you get MIDI input now?

Play audio from Mac to Yamaha MIDI keyboard?

Is it possible to send audio from the Mac to a Yamaha MIDI instrument using the MIDI cables or do I need a separate audio cable? I want to have everything played using the Yamaha instrument speakers rather than the MacBook's.

MIDI is NOT audio, you cannot transport audio over MIDI cables.
So, does the Yamaha have audio inputs?

I have downloaded the latest pages update on my iPad, but my iMac still has version 4.3 and I cannot find out how to update it only desktop. When I try to send something from my iPad pages to via email to be opened on my desktop in Pages, it won't open P

I have downloaded the latest pages update on my iPad, but my iMac still has Pages version 4.3, and I cannot find out how to update it on my desktop. When I try to send something from my iPad pages via email to be opened on my desktop in Pages, it won't open in Pages. I get a message that it can't be opened because the version is too old. I sent the document as a PDF and it worked. But I want to be able to use Pages back and forth. HOw do I update the Pages version on my desktop iMac?

The file format used by the iOS versions of the iWork apps can only be read by the new iWork apps on your Mac - i.e. Keynote 6, Pages 5 & Numbers 3. Those versions for the Mac require Mavericks, OS X 10.9. The "too old" error on a Mac comes if you are trying to open an iWork '08 or earlier file in the newest apps. If you do have the newest apps you can open the files from your iPad.
If you can't or don't want to upgrade to Mavericks & the newest iWork apps your best option would be to export/share the files from the iPad to a type an older version of iWork can read such as Word, text, Excel, etc.
Or contact AppleCare. They made this mess, let them fix it.

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi Lawrence1981,
Thanks for visiting Apple Support Communities.
You may want to check this article for additional troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jeremy

All of a sudden this morning my iphone will not send imessages from my phone number but only from my email address. When I go to the settings for my imessages to choose where they are coming from my phone number is greyed out....Is there a way to fix this

All of a sudden this morning my iphone will not send imessages from my phone....

Hi Chas869,
Hmm, that is strange that your phone number is greyed out. There are a few things that we can try. First would be to turn iMessages off, then back on. See if you are able to select your phone number. Then if that doesn't work, turn iMessages back off, then reset the network settings....settings>general>reset>reset network settings, this will reboot the phone. Don't worry, it won't delete anything from the phone, it simulates a battery pull. Once the device comes back on, then turn iMessages back on. Keep us posted if that works!
ErinW_VZW
Follow us on Twitter @VZWSupport

I would like to send pics from my windows computer to my iPhone using bluetooth. I had it paired but somehow it cannot the download the software and is asking to usa a disk instead. Where or how can I download the software available for that, please reply

I would like to send pics from my windows computer to my iPhone using bluetooth. I had it paired but somehow it cannot the download the software and is asking me to usa a disk instead. Where or how can I download the software available for that, please reply... thaks. (",)

Bluetooth file transfer has never been supported with iOS devices.

How to stop logic from auto-snapping a midi recording to a grid?

Everytime I record midi from my keyboard, logic auto snaps the size of the region to fill in to the next and previous complete bar. Is there some way to stop this? I've looked through the manual but can't find much. Thank you!

There are options for snap values at the top of the Arrange Window, plus you can set them for individual Tracks.
To fix the Regions which have already been recorded, you can simply drag the ends of the Region to where you actually want them to go (the cursor turns into a kind of bracket-with-an-arrow-in-it, a bit like this: ∑ when you're in the right place for end dragging). You can even tidy up several Regions at once. But of course you need to fix your snap value first!

I am unable to send photos from iphoto via email as an attachment to be downloaded onto another computer. i thought e-mail would automatically pick up these photos if mailed out so they could be downloaded.

At one time I was able to send photos from i photo library and I assumed the receiver could open these and download them into their apple computer (family).
I have tried to send photos from library or folder as attachment but I am also unable to do this. How do I send pictures as e-mail attachments which can be opened up and downloaded to another computer?

I've managed to sort out my own problem!! Shall write it down in case there are others out there who have a similar problem. With iPhoto open, click on iPhoto on the top menu bar. Click on preferences. Then click on account. This let me change the details such as the user name and password. Luckily I played around with a couple of my usual passwords, and found one that worked. Have now written it down!!!!

Go out from stack sequence when there is an error

Hi All,
I have a small code that used to do the simple testing. I used all stack sequence to control the equipment sequencely. What I want to do is if there is an error (either failed to control equipment or any error that can occur) in any sequence, the code will make it go out rather than loop thru all the sequence then go out, is it possible to do this kind of feature ? I do try to using the event to raise the error but it failed cos I have no idea how to do it.Anybody please help.
Thanks

But the problem is there are too many VI (about 20++
Are you running 20 different test sequences ? Or 20 instances of the same test?
If it's the same test, or even a similar test, then make it a subVI, feed it parameters to customize it, and be done.
If they're really that different, then the mistake was to write 20 different test sequences without handling errors.
If that's the case, I know of no way to automatically replace the things.
Message Edited by CoastalMaineBird on 07-16-2009 05:14 PM
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

Send midi from software sequencer to midi out

Similar Messages

Maybe you are looking for