Send SMS to mobile from SAP

hi all
i want to set SMS when Sales Order is created .
tell me is is possbile in ECC6.0 or need any configuration
tell me how to do that.
regards
ulhas

Hi,
though I havent done it,
to my knowledge you need to have registered to a service provider (mobile),
so anytime  your WF triggers, it would identify the number and send it thru this protocol.
This service provider routes all your SMS to any mobile numbers, for this you also need to have HTTP maintained in your SCOT.
I havent heard of any standard task.
Aditya

Similar Messages

  • How to send sms to mobile from tomcatserver using java code?

    Hi,
    Could you please let me know that,
    How to send sms to mobile from tomcatserver using java code? Please provide the code snippet.
    Thanks in advance.

    Yes, but something needs to send that message. You can't just take an arbitrary computer and send an SMS, it does not have the hardware to do that.
    So either you have a mobile through which you do that or more likely - you use some sort of online service to do it. Whatever choice you make will determine what code you will have to write to get it done. Nobody is going to deliver the code to you, that's your job. It is also your job to figure out what service you are going to use.

  • How to send sms to mobile from pc using jsp

    hi friends..
    i need to send a sms from my website in jsp to mobile phone..
    i dont have any idea about it.. i searched it but didnt get proper code or answer dat how should i do it..
    plz help me out with proper code....
    thanx..........

    hi,
    thanks for the reply.
    i tried the clickatell service which u mentioned. i am able to send the prestored message which they provide.
    but to send our own message we need to purchase that service, for this they sends a verification code on our mobile which i am not getting. i sent them mail but not getting any positive response.
    i wanted to know that have tried that service or any other which i can use.
    help me out in this matter.
    thanks..

  • Unable to send mails to outlook from sap system through workflow

    Hi ,
    Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is  there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
    Please find the errors belows that  traced from sost t code
    02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
    02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
    02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
    02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
    Regards
    RAGHAVENADAR

    Hello,
    Actually i checked the mail ID for WF-BATCH  using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
    But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
    So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
    ABAPer is sending mails through work flow.
    Regards
    RAGHAVENDAR M

  • Send sms to mobile through forms 6i

    Dear sirs, I want to send sms on mobile through forms 6i
    it is avalible? and how to do it?
    pls help me
    Thanks in advance
    Yasser

    You need a service provider to get the sms to the telecom companies. If you have a deal with a telco they will tell you how to send an sms via them.
    If you are not sending too many sms messages, you can connect your smartphone to your PC and use the phone's sms service. This can be costly if you want to send many messages. There is standard software for that, e.g.
    http://www.sendgroupsms.com/
    Google for "sms gateway" for more info.

  • Sending sms on mobil phone by ABAP Program

    Hello all,
    can any on give me example program to send sms on mobile phone by ABAP Program.
    Thanks
    Rajesh Choudhary

    Hi,
    check this link Rich's reply might help you.
    Re: How to send  a mailt to cell pone number or pager
    Regards,
    Amit

  • I cannot send sms or imessage from iphone 5

    Hi guys...
    I can not send sms or imessage from my iphone 5... before i had an iphone 4s and both sms and imessage worked perfectly but now when i restored my new iphone 5 from iphone 4s back up... i can not send sms and imessage. please help me asap.
    Thanks

    I tried to make the steps but i got the below underlined error..
    my iPhone is not active now
    We’re unable to complete your activation.
    This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Portal.

  • BASIS Configuration needed to send an external mail from SAP Program

    Can you please help me about the BASIS configuration needed to send an external mail from SAP Program?
    Regards,
    Subhasish

    Hi Subhasish,
    Please go thru the below link.
    Re: SCOT Configuration--for external mail
    Regards,
    Lakshman.

  • Sending mail to OUTLOOK from SAP when error encountered in MM creation

    Hi ,
    I am able to send a message to SAP inbox which i can view from SBWP. But as well i need to send mail to the OUTLOOK  .How can i send this OUTLOOK .
    I have configured the mail id in SCOT.
    Even i configured in SCOT with BASIS team i m not able to send mail to outlook.I even checked in SOST their is no entry in that .
    Is their a need for writing separate logic for sending mail to OUTLOOK as well?
    Regards,
    Ranjith ,
    +91-8431858286.

    HI  Modak,
    Please help me in getting out of this error encountered during a sample workflow thing.
    Here is the requirement I need to send a OUTLOOK mail from SAP.If the user accepts the workflow task then mail  need to send a recipient ,stating that he accepthed the request.
    Below I designed  that task.
    In send Mail step I added the recipent thing as stated below.But I was unable to send mail to OUTLOOK .In this I am not even  getting notification in my SBWP  in SAP INBOX.

  • Is it possible to send sms to groups from Messages in the new iOS8?

    Is it possible to send sms to groups from Messages in the new iOS8?

    Of course.  This feature has been part of iOS for a while now.
    http://lmgtfy.com/?q=send+group+sms+from+iPhone

  • How to send SMS thru SMPP from PL/SQL

    How to send SMS thru SMPP from PL/SQl or forms application. SMPP interface setuped in the SMSC. Requirement is send to SMS's to custoemrs thru our forms application.

    How to send SMS thru SMPP from PL/SQl or forms application. SMPP interface setuped in the SMSC. Requirement is send to SMS's to custoemrs thru our forms application.

  • Sending SMS using mobile phone connection.

    Hi all,
    I want to develop a feature to send SMS from my java application by using mobile phone.
    I am new to java.
    tell me how to connect the mobile phone from my applicatio and how do i send the SMS.
    Hoping your help sooner....
    Thanks and regards,
    Suresh Dhandauthapani.

    Hi junaid,
    Thanx for the response...One more doubt....Is it possible to send sms from pc to mobile directly using the sms server without the intervention of a service provider?If yes plzzz suggest me the steps to establish such a setup.
    Once Again..Thanx in Advance...
    R.PRASATH KRISH...
    Message was edited by:
    RPRASATHKRISH

  • How to send vendor IDOC data from SAP R/3 to XI.

    Hi experts,
    I have developed the IDOC to FILE scenario for Vendor Master Upload. I want to place flat file in local folder with in XI or Outside of XI. (Using NFS or FTP protocol in FILE adapter). My First quesstion is How to setup Folder with in XI ro Out side XI?
    And also I want to push the IDOC from SAP r/3 to test the scenario. Both XI and R/3 systems are configured to exchange data.
    How to Push Vendor IDOC from SAP R/3 to XI? (we can send XML directly to XI; but the R/3 kernal should be moe than 6.20).
    Thanks in Advance.....

    Hi,
    >>My First quesstion is How to setup Folder with in XI ro Out side XI?
    Its a normal way to creation of folders in Os level . u can create the folder in XI Server or on the FTP Server.
    ALE Settings
    Steps
    SAP XI
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (IDX1)
    a) Select create new button
    b) Enter the port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Load Meta Data for IDOC (IDX2)
    a) Create new
    b) IDOC Message Type
    c) Enter port created in IDX1.
    SAP R/3
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (We21)
    a) First Select Transactional RFC and then click create button
    b) Enter the destination port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Create Partner Profile (WE20)
    a) Create New
    b) Create the Partner no. name as same the logical system name of the destination system.
    c) Select Partner type LS
    d) Enter details for Type: US/USER, Agent, and Lang.
    e) Click on the + button to select the message type.
    f) Select Partner no. and LS which ever create above.
    g) Select Message type
    h) Select Process code related to the Message type.
    I) save.
    In SLD – System Landscape Directory
    TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
    Ts for Third Party (Logical system):-
    BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
    BS for Third Party (Logical system):-Enter the XI logical system name.
    In Transaction SALE
    Define and Assign the logical system name.
    IDoc-XI-File scenario
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    Posting the IDOC from R/3 to XI
    /people/sameer.shadab/blog/2005/07/25/reposting-idocs-instead-of-recreating--for-testing-purpose-xi
    REgards
    Seshagiri

  • How do you send by secure ftp from SAP R/3 4.6C on iseries

    We have been using the SAP Standard program, RSFTP002, to ftp files to remote servers for many years. We have now had a requirement to send via secure ftp. We are using R/3 4.6C. Unfortunatley this is not a straight forward change and it seems we may need to install some client software to enable this.
    I have searched for any SAP notes and in several user groups but have not been too sucessful.
    Has anyone ever set this up before? What client software did you use?
    Any pointers / advice on this would be much appreciated.
    Many thanks,
    Steven

    Further to my initial post, I have now discovered that there are additional options on the ftp command on iseries, so I am hoping if I can perform this manaully, then a CL called from SAP would allow me to resolve this challenge.
    I am trying to use the command below but this will use the port 990.
    FTP RMTSYS(INTNETADR) INTNETADR('*.*.*.*') PORT(SECURE) SECCNN(*SSL)
    The vendor is requesting that we use port 443 for secure ftp with SSL and even specifying this in the command as below still does not work. It seems to me there may be an issue at the receiving end. Port 443 is normally used for https so not sure whether specifying this port could cause issues. The resultant error is below.
    FTP RMTSYS(INTNETADR) INTNETADR('*.*.*.*') PORT(443) SECCNN(SSL)
    Connecting to remote host 62.39.53.181 using port 443.  
    No response from remote host; all connections closed.
    Any other comments would be welcomed.
    Many thanks,
    Steven

  • How to send a XML file from  SAP    to   WEB SERVICE

    Hi folks,
    i m creating a XML file with purchase order data, while saving the purchase order.now i need to send this XML file to some WEB SERVICE i.e to some perticular address in WEB.
    can anyone give the step by step procedure to do this web service configuration? it's really urgent.
    points must be awarded.
    Thanks & Regards
      pabitra

    Hi all,
    i need to send some purchase order data from SAP to WEB SERVICE. while saving the purchase order, i want to send some data from SAP to WEB SERVICE ( a perticular address in WEB).
    i want to see those datas in xml format in WEB.
    Now i am using SAP 4.7 version. Is this web service configuration is possible or not?
    In SE37, i can not see the CREATE WEB SERVICE option in utilitities--> More utilities menu.is it possible in 4.7???
    can anyone give any suggestion ? it's very urgent.
    Thnaks
    pabitra

Maybe you are looking for