Send text file via serial

hi
i've trying to send a text file via rs-232 but no success
The file contains a code for a device im dealing with, when i send the text file with labview to the device, it went ok with no errors, but when i connect the device on hyperterminal and check if the code was loaded it was not.
can you please give some clues to deal with this?
thanks a lot
attached example text file and LV code
Attachments:
Serial.JPG ‏45 KB
DefineHome.txt ‏1 KB

Some devices are very picky with the End Of Line. You might want to right-click on your FIle Read and deselect the "Convert EOL".
Or if you need to write 1 line at a time, right click on the Read Text File and select "Read Lines". Set the number of line to read to -1 (read all) and then wire the resulting array into a FOR loop where you do the VISA Write.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

How to send a file via e-mail with director

Is it even possible to have a button in a free-standing
projector that would send a file via e-mail, or open up an e-mail
program and have the file attached and addressed? Or is it possible
to put a file on a server? Of course, both of these methods would
alert the user and ask for their permission.

To just open the user's email program, you can use the
standard lingo:
goToNetPage(mailto:[email protected])
That approach is kind of annoying because it actually opens
an empty
browser window then the user's email program. I don't think
you can use
that approach to send attachments though.
A much better way is the fabulous DirectEmail xtra from
DirectXtras.
Check out their site:
http://www.directxtras.com/demail_home.asp?UUID=1217348
DirectEmail can do everything you are asking for (and more).
It is
cross-platform, shockwave safe, can handle text or HTML
email, can do
attachments, can use a mail server or not, and is really easy
to use.
The same company makes DirectFTP which you can get from:
http://www.directxtras.com/DFTP_home.asp?UUID=1217348
DirectFTP can put files onto an FTP site with a minimum of
fuss. I have
used both on quite a few occasions and they rock. You can
actually
write a full-fledged email or ftp program with those xtras
and Director.

Files via serial port

I need to send a jpg file via serial port. Have anyone an idea how to get it. I am using LabView 6.0.

Hi Francesc,
In order to solve this you will need:
- a null modem cable (the difference is that pin 2in goes to pin 3out and pin 3in goes to pin 2out)
- a normal serial communication VI (you can use the one in lv\examples)
- to pass the data you have to transform your array of bytes (your file) in string at sender and reverse this operation at receiver. THE ONLY PROBLEM is with ASCII character 11 (even if the receiver has all your bytes in buffer it seems that will return to you just those before ASCII 11). Thus, you will have to avoid the transmission of this character. An idea will be to split each byte from file in other two for transmission - for example its hex code (so, 11 will be transmitted as 0B ). Of course, this method doubles the number of transmit
ted bytes. If somebody found a better solution, please let me know.
good luck

Unable to send a file via my email client

when i try to send a file via email i get the following error message : ' adobe reader could not connect to e-mail client' - pl help.
os; win 7 home premium[64-bit]; browser: ie9; e-mail client : hotmail & gmail

That pretty much means you don't have an email client. This is something like Outlook Express you may have seen.
Instead, open your email and attach the PDF.

C5-03 -how to send music files via bluetooth

hi
i've c5-03 mobile
1.can any one tell me how to send music files via bluetooth
2.there only mark all option ann no mark several option can any one tell me r there any software updates for this
Solved!
Go to Solution.

PerLs wrote:
Hi,
You can do it with the file manager this is how i use to do it. You will find it in menu|applications|office folder
There is also a possibility to long press on the track and send. Im not sure if C5-03 support this... But go to you music libery and find the track you want then long press on it and press send.the long press method works
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How do i send a file via email so it opens in booklet form to other people

how do i send a file via email so it opens in booklet form to other people

You would appear to be doing the right method as in this work through:http://support.en.belgacom.be/app/staticpages/devices/en/#/nokia/c3-00/email/sending-an-email-messag...
Is there similar problem with Email without attachment?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Can not send any file via bluetooth

my 5800 Xpress music can not recently send any msg via Bluetooth. As soon as sending started, the phone will be locked where as no more action possible no keys works the phone does not even switch off by pressing its button otherwise removing the battery. pls help me

What does it says when you try to send a file via Bluetooth?
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

How to send .CSV file via email in Oracle10g/11g PL/SQL

Hi Guys,
Can any one let me know or suggest me how to send .csv file via email attachment using Oracle PL/SQL.
Thanks in advance!
Regards,
LRK

A FAQ. Use UTL_MAIL (if attachment is 32KB less). Else use UTL_SMTP. Search this forum. Search using google.

Problem to send text file to mail from ALV report

Hi Friends,
I have a problem in my ALV report with text file. As per the requirment, when we execute the program then text attachment should go to the particual email.
When i am using file type as XLS i am getting attachment with all 4 recoreds( input for 4 records) in mail. But all 4 records are coming in SAME ROW. It should come 4 records in 4 rows. when I use file type as TXT and separated by pipe symble in code, it is showing only one recored for same above input.
When i use file type as XLS and click the attachment in email, it will triggire one popul with three options like SAVE, OPEN, CANCEL.
But when i click on text file attachment, it is directly showing ony one recored.
Please correct me on this.
my code is
PERFORM send_file_as_email_attachment
                               tables i_message
                                      i_attach
                                using v_email
                                      'User last log on details'
                                      'XLS'
                                      'User log on list'
                             changing v_error
                                      v_reciever.
FORM send_file_as_email_attachment tables pi_message
                                          pi_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: l_error    TYPE sy-subrc,
          l_reciever TYPE sy-subrc,
          l_mtitle LIKE sodocchgi1-obj_descr,
          l_email LIKE somlreci1-receiver,
          l_format TYPE so_obj_tp ,
          l_attdescription TYPE so_obj_nam ,
          l_attfilename TYPE so_obj_des ,
          l_sender_address LIKE soextreci1-receiver,
          l_sender_address_type LIKE soextreci1-adr_typ,
          l_receiver LIKE sy-subrc.
l_email   = p_email.
l_mtitle = p_mtitle.
l_format              = p_format.
l_attdescription      = p_attdescription.
l_attfilename         = p_filename.
l_sender_address      = p_sender_address.
l_sender_address_type = p_sender_addres_type.
Fill the document data.
v_doc_data-doc_size = 1.
Populate the subject/generic message attributes
v_doc_data-obj_langu = sy-langu.
v_doc_data-obj_name = 'SAPRPT'.
v_doc_data-obj_descr = l_mtitle .
v_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR v_doc_data.
READ TABLE i_attach INDEX v_cnt.
v_doc_data-doc_size =
     ( v_cnt - 1 ) * 255 + STRLEN( i_attach ).
v_doc_data-obj_langu = sy-langu.
v_doc_data-obj_name   = 'SAPRPT'.
v_doc_data-obj_descr = l_mtitle.
v_doc_data-sensitivty = 'F'.
CLEAR i_attachment.
REFRESH i_attachment.
i_attachment[] = pi_attach[].
Describe the body of the message
CLEAR i_packing_list.
REFRESH i_packing_list.
i_packing_list-transf_bin = space.
i_packing_list-head_start = 1.
i_packing_list-head_num = 0.
i_packing_list-body_start = 1.
DESCRIBE TABLE i_message LINES i_packing_list-body_num.
i_packing_list-doc_type = 'RAW'.
APPEND i_packing_list.
Create attachment notification
i_packing_list-transf_bin = 'X'.
i_packing_list-head_start = 1.
i_packing_list-head_num   = 1.
i_packing_list-body_start = 1.
DESCRIBE TABLE i_attachment LINES i_packing_list-body_num.
i_packing_list-doc_type   = l_format.
i_packing_list-obj_descr = l_attdescription.
i_packing_list-obj_name   = l_attfilename.
i_packing_list-doc_size   = i_packing_list-body_num * 255.
APPEND i_packing_list.
Add the recipients email address
CLEAR i_receivers.
REFRESH i_receivers.
i_receivers-receiver = l_email.
i_receivers-rec_type = 'U'.
i_receivers-com_type = 'INT'.
i_receivers-notif_del = 'X'.
i_receivers-notif_ndel = 'X'.
APPEND i_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = v_doc_data
            put_in_outbox              = 'X'
            sender_address             = l_sender_address
            sender_address_type        = l_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = v_sent_all
       TABLES
            packing_list               = i_packing_list
            contents_bin               = i_attachment[]
            contents_txt               = i_message
            receivers                  = i_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
l_error = sy-subrc.

Hi,
declare the following constant in u r program and concatenate at the end of each and every record in your internal table.
CONSTANTS : LV_CRLF TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF.
for eg.
if u internal table has values like
row1
row2
row3
concatenate the 1st record lv_crlf into first record.
conactenate second record lv_crlf into second record.
concatenate third record lv_crlf into third record.
now attach the internal table to the FM which u use for sending email. Each and every row will come in new line. The LV_CRLF will hold nothing but a line feed character (#).
Hope it will solve u r problem
Regards,
Rose.

Send text file to spool

Hello Gurus,
I like to send a text file from the aplication server to spool or send this file to a specific printer.
What instructions do you know?
Thanks.
Joseph.

Hi,
I think the best way to send a text file from application server to the spool printer.
1. Download the file into a internal table
2. Use standard function modules to send the table to the spool printer
Regards

How to send text file as an email attachment havin more than 255 characters

My requirement is to generate a text file and to send this text file as E-mail attachment. I am using FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' to send the E-mail. but here the limitation is the number of characters per line must not be more than 255 characters whereas in my case it is exceeding 1000 characters per line. could anyone please suggest me what should i do now ? Each field in the text file has to be tab delimited.

Simplest might well be to use javamail API instead of the two tags that Sites provides, e.g. see email - Sending mail attachment using Java - Stack Overflow for a full example.
Phil

Use FTP Transport Protocol (XI) to send text file created from R3

I've configured a Port in IDoc Processing (WE21) to create an output file from a Bank Partner Profile (WE20) where my Message Type is PAYEXT and IDoc Type PEXR2002.
I need to take this Text File and send it to the Bank;s FTP site using the Integration Server (XI).
How can I take this text file and simply send it to the Bank without going through File Content Conversion in order to convert it to XML as the Sender and then uncovert it during the Receiver to FTP the file to the Bank?
If that is not possible, would anyone know how to configure the RecordSet Structure and parameters for both the Sender and Receiver?

Hi,
Let me re-phrase your scenario:
ECC is required to send PAYEXT IDOC to XI which needs to be send to the bank in IDOC text file format to the bank. If this is the case we can achieve this by doing the following:
1.Rather than using TRFC port used by the IDOC as the method of communication, you can leverage using file port. The configurations to the file port are simple. You need to select a place where you can drop the IDOC file created by the ECC system and XI would pick up the file.
2. Poll for the file using NFS from that particular location where ECC drops the file. (If it is being staged on the ECC system, then XI service user SAPservice<SID> must have access permission on that folder like \usr\sap\put\interfaces.
3. Configure receiver FTP adapter to send the file to the bank.
Hope this helps.
Indranil
Award points if helpful

How to copy/send text file from FTPS to SAP ECC File Port

Hi Frdns,
I am working on one design, actually my requirement as follows
I am receiving financial information document from Banks, which is in the form of BIA2 message format, it looks like text file. This information needs to be sending to SAP ECC system.
I identified some approaches to full fill the requirement
1)Using Conversion agent/or third party tools to convert BIA2 message in to XML, then using PI I will pick up the XML message, convert it in to IDoc.
2)Without any conversion I will copy the same file (original BIA2 message) in to SAP ECC file port, in this case no conversion required, calling some program I will schedule it.
I am looking forward t implement the second approach because it saves lot of money to my client.
Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
What is the best approach to copy the BIA message text file from FTPS to SAP ECC File Port.??
Regards,
Raj

Hi Raja,
>>Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
Yes you can do this copy, the only restriction that can happen is the file size.. If you are sure that the fiel will be of few MB at the max then you can use the Configuration part alone and copy it to ECC folder. For doing this you need the following:
1. Sender agreement (mention the sender interface as anything XYZ)
2. Sender communication channel. Pick the file in binary mode
3. Receiver determination (keep both the sender and receiver service as same)
4. Interface Detemiantion (dont specify any mapping and keep the receiver interface name as XYZ)
5. Create receiver agreement (with same service and interface)
6. Use file adapter here
Regards
Suraj

Sending text files as attachments in mails

Hi Experts,
I want to send some content in a text file as an attachment in the mail. Can anybody provide me the sample code for this.
points guaranteed.
thanks
sanakr

HI
Check this one
first create a Include report with the following coding
*& Include           ZPA1_INCLFOR_MAIL                                *
* Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
* FORM
FORM ml_customize USING objname objdesc.
*----------- Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
*--------- Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
* FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
* FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
* FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
*--------- Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
* IMPORTING
* COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
* Header Data
* Already Done Thru FM
* Main Text
* Already Done Thru FM
* Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
* Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
* Receiver List
* Already done thru fm
ENDFORM. "ml_prepare
* FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
* CONTENTS_HEX = objhex
* OBJECT_PARA =
* object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
* FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
*-------------- Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
*------------- Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
* FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
*-------- Data
DATA : pos TYPE i.
DATA : len TYPE i.
*------------ Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
Then include that report in the following report and copy the same code and paste it there
*& Report ZPA_TEMP147                                                 *
REPORT ZPA_TEMP147                             .
INCLUDE zpa1_inclfor_mail.
* DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
* SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
* AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
* START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
* FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
EXTENSION = extension
NAME = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
Regards
Pavan

Sending text file out of sap

Hi All
I have this requirement
I have to read vendor data in sap , create a text file of this data in the daily basis and send the text file to a third party system.
I know how to read data and create the file , but how can I send this file to other third party system , actually it is an SQL server, which uses this file to update the vendor table.
Thank you.

hi Malu,
If you want o put the File in Unix server..
us the commands FTP_COMMAND , FTP_CONNECT and place the file in the unix server.
of you want to place file in the Application server use open data set and close data set..
if you want to place file manually..
use t-code CZ3Y.
regards,
Prabhudas

Send text file via serial

Similar Messages

Maybe you are looking for