Sending a message from PXI CAN Series 2 to device interface

Is it possible to send a CAN message to a device interface? What VIs should be use? I need to send a single message ("x92") to a device interface in order to enable its function.
Thanks!

Great! That worked smoothly! Thanks DirkW
We now have this VI that sends a message to enable a sensor and then starts reading raw data. We understand this data is CAN frames which now we need to convert to channel in order to get scaled values. We tried "CAN Frame to Channel vs 2_2_2" from NI but it needs some cRIO parameters that we don't have. We also looked at the "CANConversionLibrary" but nothing that applies to our case.
How could we process the "Data" shown in the last column of the attached VI?
Thanks!
Attachments:
CAN_Test_AmmoniaSensor.vi ‏44 KB
CAN_Test_AmmoniaSensor_front.JPG ‏36 KB

Similar Messages

Regarding text messaging, if I send a message from my iPhone, the reply goes to my ipad, or mini ipad. How can I fix this?

Regarding text messaging, if I send a message from my iPhone, the reply goes to my ipad, or mini ipad. How can I stop this from happening?

Go to Settings/ Messaging/ Send & Receive on each device to set the contact points to be reached at, and to set the "from" address when you start a new message. It sounds like your iPhone might be sending messages out as one thing (e.g. an iCloud address) but set to not receive replies only to your phone number. Make sure you review settings on each device since you may, or may not, want to have them common.

HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

Hi Elaine
Here si what I do:
Since I tend to message with teh same people I leave the messages available to me. If you are in one conversation with "Karen" and want to message with "Kathy" tap the message back arrow and select Kathy.
As always just be careful to rememeber who you are messaging to!

How can I send a message from database to a J2EE application?

How can I send a message from database to a J2EE application?
If I have a codetable in database that has new or modified values I have to refresh the codetable in my J2EE application.
Most effective way would be send a message to initiate a table reload from J2EE app, but I don't know how to do this.
Now I have a background thread that regular reads the table and looks for changes.

http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
This document details how to create triggers on a table that send out JMS messages.
In this example, the messages are going to Oracle BAM.. your message could go to your J2EE application listening to its own topic/queue.
an alternative idea.
you could also just cache your lookup table with something like Oracle Coherence and than try to ensure that all changes to the lookup go through Coherence, so that you won't need to do notification from the db up to the application. the application and the lookup data management tool would be using the data grid for management of the lookup table data, and the data grid (coherence) would persist the lookup data changes back to the db.

Can't send audio messages from Nokia E63 to email ...

I used to send audio messages from my mobile to my friend's email, and it worked fine.
But some days ago it stopped working. I keep on seeing this whenever I try to send audio message.
"In order to send/download MM messages, the current active connection may be closed (this may affect other applications in use). Do you want to continue ?"
When I disconnected connection, it fails to send again. I saw this message:
"Multimedia message cannot be sent. Packet data connection not available"
It is impossible for me to send the audio message if I close the connection because I'm not having internet in my phone.
I have been using packet data connection to send all the messages to email all the time and it went OK. I got that problem just a few days ago and I cannot send any audio messages now.
I can still send normal emails (non-audio message) from my phone through packet data connection though.
The problem is only when sending the audio message.
I'm using Nokia E63 and I'm in the UAE.
My mobile provider is "Du".
I use packet data connection from "MyWorld"
I don't have any other packet data connections. I had many but now, MyWorld is the only one in my phone.
Please help me how can I do it.

Automatic configuration.
Your mobile will be automatically configured to access the MyWorld mobile portal when you first join du.
You will receive an SMS message, which you should accept and save.
You can also request for these settings by sending the following SMS message “du” to 333 or by calling Customer Care on 155.
Availability of the MyWorld mobile portal and of the relevant settings is dependent on your handset type.
For more information on MyWorld, call 155 from your mobile or visit us at www.du.ae
This might do the trick.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Can send I messages from ipad but reply only goes to Iphone

Can send I messages from my I Pad but reply only comes to my Iphone

Your question is a bit confusing, but your iPad can only send messages to other iOS devices, such as other iPad users, iPhone users and iPod touch users who have iMessage enabled on their devices. You can not send text messages from iPad to non-Apple devices, like Android phones........

I've downloaded iMessage but can't send a message from my macbook

hi people, Ive downloaded the imessage facility to my macbook pro and all the messages I send between my ipad/iphone show up in the screen but I cant send a message from my macbook, the send icon doesnt appear in the text box. It allows me to type in a message, add a smiley but then nothing. Help please ,in language this old brain of mine can decipher )

Hi,
Some of us do have the advantage of using iChat before we moved to Messages - which is where on the Mac we learnt to send by using the Enter Key.
Messages does add the ability to Send to iOS devices using iMessages and is almost as old as your Mac and we have all been trying to find out how it works.
Glad to have helped and
Thanks for the Points
7:23 PM Sunday; June 3, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I own osx mountain lion with messages.When i go to create a new message i dont undrestand why you can send it to their email.also is it possible to send a message from my mac to another mac that has mountain lion. MacBook, OS X Mountain Lion, help me

I own osx mountain lion with messages.When i go to create a new message i dont undrestand why you can send it to their email.also is it possible to send a message from my mac to another mac that has mountain lion.
MacBook, OS X Mountain Lion, help me

The recipient needs to have Messages set up with the e-mail. Check the image below:
Hope it heps.
JP

I can't send picture message from my iphone s4 to samsung galaxy, plz advise

I can't send picture message from my iphone s4 to samsung galaxy, plz advise
I can send picture my other iphone.
Thx

Hi,
The issue is :
Message> choose Existing picture> send.......message failed.
Plz advise. Thx

I have an ipad and Iphone. I cannot send I message from my ipad to certain people and yet can from my Iphone.

I have an ipad and Iphone. I cannot send I message from my ipad to certain people and yet can from my Iphone. Any suggestions

You can send iMessages to other iOS devices, like iPad, iPhone, etc. Furthermore, the other iDevices users must have set up their iMessage.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Why can't i send picture messages from my 4s?

why can't i send picture messages from my 4s?

I have no idea. And since you provided absolutely no information, no one else will know either.

Help! Can't send SMS messages from 4S

I can't send picture messages. Regular messages work and imessage works but can't send picture messages from there either. Anyone having issues with this?

Have you try setting your MMS prior in sending the pictures?

How can i send simple message from PC-to-another device

How can i send simple message from PC-to-another device
just simple message (like command String) not SMS or Data File.
I have a computer with bluetooth and the oter side is Embeded Blue
Thanks.

http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
This document details how to create triggers on a table that send out JMS messages.
In this example, the messages are going to Oracle BAM.. your message could go to your J2EE application listening to its own topic/queue.
an alternative idea.
you could also just cache your lookup table with something like Oracle Coherence and than try to ensure that all changes to the lookup go through Coherence, so that you won't need to do notification from the db up to the application. the application and the lookup data management tool would be using the data grid for management of the lookup table data, and the data grid (coherence) would persist the lookup data changes back to the db.

How i can send i message from my i phone to my i pad

how i can send i message from my i phone to my i pad

Activate iMessage on both your phone and your iPad. Then send an iMessage to the email address you are using for iMessage on your iPad (which is shown in Settings>Messages>Receive At).

Why do text messages from my iPad appear to some people as if they came from my email address instead of my phone number? This does not happen when I send text messages from my iPhone.

Why do text messages from my iPad appear to some people as if they came from my email address instead of my phone number? This does not happen when I send text messages from my iPhone.

You need to link your iPhone number to Messages - and Facetime if you use it. For Messages go to Settings>Messages>Send and Receive at>You can be reached by iMessage at. If your phone number is showing there, select it as your Contact address. If it doesn't appear in there, take a look at the end of this article for help.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support

Sending a message from PXI CAN Series 2 to device interface

Similar Messages

Maybe you are looking for